Message Class assignment to application area

Hi all,
Now i have created a Z* message class and would like to assign this class to application area asset accounting for GGB0 purpose.
Means, when i am creating validation rules at AA, and while putting error message number,  system showing message class /SAPDMC/LSMW_GLO_040 and i have to choose from this message class only. Here i cannot choose message from another message class. Since i would like to use a message from my own Z* message class.
Please suggest.
Regards,
Srinu

Hi,
While being in GGB0, stand on the node of the validation group (e.g. Asset Accounting - Master data), go to Menu - Environment - Change Message class.
Regards,
Eli

Similar Messages

  • No Categorization Schema assigned to application Area

    Hi Friends,
    I am getting following error message while creating a BP Contact persom from IC WebClient.
    "No Categorization Schema assigned to application Area(BUS_ACTIVITY, SUBJECT_PROFILE, ACT000001)"
    The BP's are getting created, but the message appears once we try to identify the account.
    I think I am missing some configuration.
    Can you pls help me on this ?
    Thanks and warm regards
    Purnendu

    Hi Maiti ,
    Category modeler provides you four fields in the order type you wish to see it these fileds can be used as per your requirements and you can set a logical drop down say if A is selected in the first field then what should appear in the second & so on .
    To activate
    1.Add the CRM BSP application CRMM_ERM_CAT
    2.Launch the category modeler
    3.Select the advanced search and then go
    4.Create new schema
    5.keep the status in general tab as draft,go to application area and select the service ticket(where you want to see it).Go to categories tab
    6.Here you create a sub note say product
    7.create a subnote to this which will appear in the next field when product is selected in the first....and so on.
    Now once the logical seq is set ,go to general tab and set the status to released.It takes 24 hours for the schema to be active .Once it is active you can see the fields in your application area

  • No categorization schema assigned to application area SERVICE_ORDER ...

    Hy guru,
    when i go to the service ticket in Interaction center Web Client, i canu2019t use the multilevel categorization.
    I have created in ic_manager a schema which I assigned the area application u201Cservice orderu201D, but when I go to the service ticket the following message error is shown:
    No categorization schema assigned to application area (SERVICE_ORDER, SUBJECT_PROFILE, SERVICE),
    and in the area u201Ccategorizationu201D, there is only the button u201CAuto Completeu201D disabilited.
    Can you help me???
    Thanks
    Virginia

    Ok, then go through it and do not forget to deploy your settings.
    For more information regarding the CM, check this [link|http://help.sap.com/saphelp_crm50/helpdata/en/cf/86c9c802dc4c92a9f8d43bdf5d426e/frameset.htm]
    I hope it will be helpful.
    Regards
    AleX
    Edited by: Alexandro St. Torro on Dec 1, 2008 5:38 PM

  • Error  No categorization schema assigned to application area (, , )

    hi all,
    i am getting the error( No categorization schema assigned to application area (, , ))
    in web ui while clicking on category drop down in service request.
    it is working fine before ehp1 enhancement but now it is showing error.
    but still functionality is working only error is displayed.
    plz tell me the required step for it.i have even tried note:1268739

    Did you resolved this issue? I am facing same error message now in EhP1...

  • HELP!!!  Message - (One or more applications are using the iTunes scripting interface. Are you sure you want to quit?)  How do I get this to stop?

    I bought a new Sony Vaio Laptop running Windows 8, 64bit, i7 processor.  Everytime I open iTunes and then close out, the following message occurs: (i-tunes message - One or more applications are using the iTunes scripting interface. Are you sure you want to quit?) Then it starts counting down from 20 seconds unless I just click on the (Quit) button.  How do I get this to stop?  Please be specific, I am challenged when it comes down to computers.
    Thank You

    This was extremely annoying for me, also.  I started uninstalling unneeded Sony applications to try to narrow down the problem.  It turned out not to be a Sony application... it is some functionality built into the bluetooth driver software package by Broadcom.  Uninstalling the bluetooth package (via the control panel) takes care of the problem.  Itunes also boots up way quicker.  But uninstalling it will remove features related to bluetooth and nfc.   For me, that isn't an issue, since I don't use them.  Since you said you're "computer challenged" I would probably just send an email to sony complaining about the problem.  They'll get in touch with Broadcom eventually (the manufacture of the drivers) and get the problem fixed.
    Side note: the Broadcom package is huge...  nearly 1GB in size.  Which is crazy.  I can't imagine what it does considering the size of it.  Entire operating systems can take up less storage.  Also, I have no idea how it starts an itunes plugin without placing it into the standard plugin directories.

  • Class Component in Application area for Invoices & Dunning

    Hi friends, can anyone help me to know the class components of Application area while creating new tabs,
    For example- In that CIC screen, I want's to create a tab like Invoices & Dunning in application area, but the thing is I can't find the class component for the both Invoices & Dunning, I was searched in full class component detail description, I cn't see & find this, plz help me to know this, I would be great full to me.............

    Prince,
    I used all possible components and profiles for the Customer overview in Application area.
    I am happy with the two options.
    Case 1:
    Component - NAV_VIEW
    Profile - ISU
    Result - I am getting the following information in the screen.
    - Premise
    - CA
    - Contract
    - Installation
    - Device
    I am happy with this but the problem is I am not getting BP details.
    Case 2
    Component - NAV_VIEW
    Profile - ISU_DRG
    Result - I am getting the following information in the screen.
    - BP
    - Premise
    - CA
    - Contract
    - Installation
    - POD
    - Switch Document
    The problem is I am not getting Device details and also POD is not required.
    Please suggest.

  • What does this message mean: "power pc applications are no longer supported"?

    What does this message mean: you can not start because power pc applications are no longer supported?

    Here is a post that I assembled for another who needed to continue to run his PowerPC applications in Lion/Mt. Lion:
    Unfortunately you got caught up in the minor miracle of Rosetta.  Originally licensed by Apple when it migrated from the PowerPC CPU platform that it had used from the mid-1990's until the Intel CPU platform in 2006, Rosetta allowed Mac users to continue to use their library of PPC software transparently in emulation.
    However, Apple's license to continue to use this technology expired with new releases of OS X commencing with Lion (and now Mountain Lion).  While educational efforts have been made over the last 6 years, the fact is that Rosetta was SO successful that many users were caught unaware UNTIL they upgraded to Lion or Mountain Lion.
    Workarounds:
    1. If your Mac will support it, restore OS X Snow Leopard;
    2.  If your Mac will support it, partition your hard drive or add an external hard drive and install Snow Leopard into it and use the "dual-boot" method to choose between your PowerPC software or Lion/Mt. Lion;
    3.  Upgrade your software to Intel compatible versions, or find alternative software that will open your data files;
    3.  Install Snow Leopard (with Rosetta) into Parallels:
                                  [click on image to enlarge]
    Full Snow Leopard installation instructions here:
    http://forums.macrumors.com/showthread.php?t=1365439
    NOTE: STEP ONE of the instructions must currently be completed on a Snow Leopard or Lion Mac and the resulting modified Snow Leopard.cdr install file can then be moved over to your Mountain Lion Mac for completion of the remaining steps.
    NOTE 2:  Computer games with complex, 3D or fast motion graphics make not work well or at all in virtualization.

  • Which message class is this message from?

    Hi All,
    is there a way to find to which message class does a particular message belong to? for ex: i wanna know the message class of Message no. 00055 (Fill in all required entry fields) i get this message when i try to bypass any manadatory field while maintaining any infotype in PA30.
    When i go to se91, there are so many classes, i cldnt find to which message class this error message belongs to.searched all classes which search string "infotype" business logic/checks etc. But cldnt find this one.
    any ideas?
    thanks in advance.

    Dear Hruser,
    Go to table T100.
    Put message number & message text , you will get your message
    class in ARBGB (Application area).
    Cross check in se91.
    The message you have given is from message class 00.
    Kindly allot points in case useful.
    Regards,
    Darshan Mulmule

  • How to change of Messge classe assigned to Call point?

    Dear friends
    I have defined one validation, in line item call point - 2, I have defined one message class. Now I want to change the message class assigned to call point 2 ie. line item.
    Please help me how to change the message class.
    Thanks in advance.
    Regards
    Kiran A

    hi
    Message class cannot be changed ... As message class is for one particular submodule
    eg: message class for account receivable /account payable
    message class for asset accounting.
    So if you have created a validation you might have created for account receivable so message class for account receivable would be displayed by default you cannot change it to message class for asset accouting . you have option for changing message no but not message class.

  • Application area and Message no Significance

    Dear Friends,
    When error msg comes and if I go and see the technical info it gives application area and msg no....how to make use of that?.......how to see the information the msg contains?.......

    Hi
    use tcode se91
    put application area in message class
    and the message no in the mesaages noumber field
    Anurag

  • I keep getting error message, "can't open application PACE because PowerPC applications are no longer supported." I've run Clean My Mac and I still get the error.

    I keep getting error message, "can't open application PACE because PowerPC applications are no longer supported." I've run Clean My Mac and I still get the error.

    Use the Finder "Go" menu while holding down the option key to expose your User / Library folder.
    Look in the Application Support folder for PACE items and delete them.

  • I upgraded my Mac from OSX 10.5.8 to Snow Leopard and then to Mountain Lion 10.8.2.  I did have Microsoft Office for Mac 2004 in my applications and now get a message "can't open Office because Power PC applications are no longer supported."

    I just upgraded my MAC from OSX 10.5.8 to Snow Leopard and then to Mountain Lion 10.8.2.  When I try to access my Microsoft Office for MAC (2004 edition) files I am getting a message "can't open Office because Power PC applications are no longer supported.  How can I access all of my save Word documents?  I just want to be able to retrieve all of my documents that were in Microsoft Office for Mac (2004).  If I purchase the newest version of MS office for Mac from Apple will I be able to retrieve my old documents?

    Use any number of free alternatives to your nearly decade old version of MS Office.
    Consider
    LibreOffice (donation-supported)
    NeoOffice (free)
    OpenOffice (free)
    In addition to the above I also recommend Apple's Pages ($19.99). I use OpenOffice and Pages and have been completely Microsoft - free for years. Life is better without Microsoft.

  • Why does my Photoshop PS2 open on my Mac Book Pro OS 10.6.8 Intel Core 2 Processor but not on my just purchased Mac Book Pro OS 10.7.3? On my new machine I get a message saying "You can't open Photoshop CS2 because Power PC applications are no longer sup

    ?  Why does my Photoshop PS2 open on my Mac Book Pro OS 10.6.8 Intel Core 2 Processor but not on my just purchased Mac Book Pro OS 10.7.3? On my new machine I get a message saying "You can't open Photoshop CS2 because Power PC applications are no longer supported". I don't have a Power PC on either machine and this App does run on the older machine with an Intel processor. benrusy

    This is not new.  The fact that Mac OS no longer supports PowerPC applications starting with OS X Lion has been known for over a year now.  You'll need to upgrade to the latest version of Photoshop

  • At the top of my homepage, I'm getting a message "Downloading the latest applications", but the circle to the left keeps spinning, and no applications are downloaded. I don't know how to stop this, tried right and left clicking on the bar. This occurs

    At the top of my homepage, I'm getting a message "Downloading the latest applications", but the circle to the left keeps spinning, and no applications are downloaded. I don't know how to stop this, tried right and left clicking on the bar. This occurs every time I open Firefox. How can I stop or disable this?
    == This happened ==
    Every time Firefox opened
    == Several weeks ago.

    See http://kb.mozillazine.org/Software_Update (Software Update not working properly)
    Remove the files in the ''updates'' and ''updates\0'' folder:
    Vista/Windows7:
    C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\ (updates)
    C:\Users\<user>\AppData\Local\VirtualStore\Program Files\Mozilla Firefox\ (updates)
    %LOCALAPPDATA%\Mozilla\Firefox\Mozilla Firefox\updates\

  • I have Windows 7 for PC if I view a jpg file I gat the following message - Some of the file types associated with QuickTime applications are currently associated with otherapplications. Should I restore these file type associations to Quicktime. Yes or No

    After viewing a jpg file on my Windows 7 PC I get the following message and I don't know how to answer it "Some of thw file types associated with QuickTime applications are currently associated with other applications. Should I restore these file type associations to QuickTime?" Options are " Yes, No or Do not ask to perform yhis check again. QuickTime Control Panel can be used to make subsequent changes."
    What shoul I do about this message?

    Select no.

Maybe you are looking for