Error No categorization schema assigned to application area (, , )

hi all,
i am getting the error( No categorization schema assigned to application area (, , ))
in web ui while clicking on category drop down in service request.
it is working fine before ehp1 enhancement but now it is showing error.
but still functionality is working only error is displayed.
plz tell me the required step for it.i have even tried note:1268739

Did you resolved this issue? I am facing same error message now in EhP1...

Similar Messages

No Categorization Schema assigned to application Area

Hi Friends,
I am getting following error message while creating a BP Contact persom from IC WebClient.
"No Categorization Schema assigned to application Area(BUS_ACTIVITY, SUBJECT_PROFILE, ACT000001)"
The BP's are getting created, but the message appears once we try to identify the account.
I think I am missing some configuration.
Can you pls help me on this ?
Thanks and warm regards
Purnendu

Hi Maiti ,
Category modeler provides you four fields in the order type you wish to see it these fileds can be used as per your requirements and you can set a logical drop down say if A is selected in the first field then what should appear in the second & so on .
To activate
1.Add the CRM BSP application CRMM_ERM_CAT
2.Launch the category modeler
3.Select the advanced search and then go
4.Create new schema
5.keep the status in general tab as draft,go to application area and select the service ticket(where you want to see it).Go to categories tab
6.Here you create a sub note say product
7.create a subnote to this which will appear in the next field when product is selected in the first....and so on.
Now once the logical seq is set ,go to general tab and set the status to released.It takes 24 hours for the schema to be active .Once it is active you can see the fields in your application area

No categorization schema assigned to application area SERVICE_ORDER ...

Hy guru,
when i go to the service ticket in Interaction center Web Client, i canu2019t use the multilevel categorization.
I have created in ic_manager a schema which I assigned the area application u201Cservice orderu201D, but when I go to the service ticket the following message error is shown:
No categorization schema assigned to application area (SERVICE_ORDER, SUBJECT_PROFILE, SERVICE),
and in the area u201Ccategorizationu201D, there is only the button u201CAuto Completeu201D disabilited.
Can you help me???
Thanks
Virginia

Ok, then go through it and do not forget to deploy your settings.
For more information regarding the CM, check this [link|http://help.sap.com/saphelp_crm50/helpdata/en/cf/86c9c802dc4c92a9f8d43bdf5d426e/frameset.htm]
I hope it will be helpful.
Regards
AleX
Edited by: Alexandro St. Torro on Dec 1, 2008 5:38 PM

No categ. schema assigned to applic. area(SERVICE_ORDER, SUBJECT_PROFILE, )

Hi SAP CRM experts,
I'm working on SAP CRM 2007 with interaction centre web UI - Service
Tickets management.
I'm encountering a problem with multilevel categorization:
let suppose that I identify an employee, the Interaction record is
created, than I create a service ticket as a follow up from it. The
multilevel categorization works correctly.
Then I end the interaction by clicking on the button end under the
Header Area.
The current interaction ends and I'm able to identify a new BP: the
Interaction Record is correctly created. Now I create a Service Ticket
as a follow up from the Interaction Record. In this case, the
multilevel categorization schema is no more available and an error
message is displayed by the system.
What should I do?
Thanks in advance,
Andrea Ricci

Hi Andrea
Would you be able to share with the Forum how the issue was resolved.
Regards
Arden

Message Class assignment to application area

Hi all,
Now i have created a Z* message class and would like to assign this class to application area asset accounting for GGB0 purpose.
Means, when i am creating validation rules at AA, and while putting error message number, system showing message class /SAPDMC/LSMW_GLO_040 and i have to choose from this message class only. Here i cannot choose message from another message class. Since i would like to use a message from my own Z* message class.
Please suggest.
Regards,
Srinu

Hi,
While being in GGB0, stand on the node of the validation group (e.g. Asset Accounting - Master data), go to Menu - Environment - Change Message class.
Regards,
Eli

I am trying to use Adobe Professional 7.0 and getting an error... The following applications are using files that need to be updated by this setup. CLose these applications and retry.

Here is the error message. Any idea what this is? I have the program on another computer and it wont let me uninstall. The error message occurs on both computers

Use Ctrl+Alt+Delete.
Open Task Manager
Look under Processes
Find AcroTray and kill process.
Retry button on message.

Steps to use Classification w service tickets- No categorization schema

I have been searching SAP help & SDN but no luck figuring what steps I need to do to use the classification in the Service Ticket.
1. I used the category modeler to create a 2 level schema.
1a. schema assigned to busines activity ticket in application area, parameter = subject profile, Value = ZACT00002.
1b. status is released
1c. in the categories I assigned to a catalogue / code group / code ZACT00002 (as set up in the IMG - Catalogues, codes, profiles)
2 I assigned the DEFAULT categorization profile to my IC profile (has service allowed to 4 levels)
3. I don't have a service product assigned but not sure I need one (nor know how to assign one)
But when I confirm a BP, the error message > >>>
No categorization schema assigned to application area (BUS_ACTIVITY, SUBJECT_PROFILE, ZACT00002)
& go to service ticket, the classification field is still empty.
Would appreciate if someone could tell me what I am missing.
Edited by: Glenn Michaels on Feb 12, 2008 2:34 AM

Hi Glenn
The Status of the Schema should be active. You can set a Date & Time From (and To) which the schema is valid for.
Normally the default from date is set for 24 hours time, which means you wait till the schema is active before you test, however you can change this, I usually set it to 10 minutes in the future.
That is probably your main issue at the moment, once the Schema is "Active" you should have more luck.
You will need to create a Product for "Service", called INVESTIGATION. Wihout this product you'll be dogged with product related errors.
Before you create the INVESTIGATION Product you'll need to ensure a Hierachy and Category exist which the Product can belong to. I think the Best Practices guide will help you with this.
If you get stuck further, drop another hit.
Good Luck.
Arden.
Reward with points if helpful

Categorization schema moduler

Hi expert,
We are upgrading 4.0 to 7.0. On Service Process and Confirmation screens, the older version is using Subject Code while in new we would need to use Category (multilevel). The conversion schema is supposed to be created in Moduler in WebUI but I don't see it in anywhere as we are not using Knowledge Management in ICW (I saw a post talking about in ICW with KM). Can you shed some light on where I can access the moduler? What role is required in case needed.
Thank you in advance.
Steven

Hi Steven
Heres how to create multi-level categorization:
1. Login WebClient using Business role IC_MANAGER.
2. NavBar > Knowledge management > Create > Categorization Schema
3. Application area > New >
Application ID = "Service Order"
Parameter = "Subject Profile"
Value = Select your Subject profile.
4. Category Hierarchy > New > now on the right side select subject code from drop down
5. Repeat step 4 to Create the required levels, sub levels and assign them subject codes.
6. Now select the root (Schema ID) and on the right change valid from date 5-10 min in future.
7. Change the status to Released and save.
Check this link for more details:
How to use the 4 level Categorisation Schema
http://help.sap.com/saphelp_crm60/helpdata/en/43/0d74a0b2ab21ace10000000a1553f6/frameset.htm
Hope this helps
Rupesh Patil

PowerPC applications are no longer supported on OS X Lion

I recently purchased SAT/PSAT/ACT preparation material for my daughter from Kaplan. I could not run the software on OS X Lion that I have. The error message I get is - " PowerPC applications are no longer supported". Does any one know what the solution is?

Lion no longer supports the Rosetta emulator used to run PPC-only applications. If Kaplan is using proprietary software then you need to contact them about an update. If they are using some other third-party software then you may need to contact its developer.

No Hierarchy Variant assigned to FM Area Test

Hi...
I am facing problem at the time of creating Budget using T.Code: FMBB
System gives Error: "No Hierarchy Variant assigned to FM Area Test"
After that I have gone through configuration & trying to assign Hierarchy variant to FM Area,
Fiscal Year: 2010
Hierarchy Variant: THV,
then it will show message that - Here You are only allowed to enter Fiscal Year "0000".
After that I changed fiscal year 0000 & trying to assign hierarchy variant,
then it shows message that 'Hierarchy variant THV is incomplete with regard to fiscal year 0000".
Now I am unable to post budget initial Entry.
Kindly suggest the possible solutions for this.
Regards
Moonoo

Hi,
Please refer below mentioned link for Hierarchy Variants in the Fiscal Year :
http://help.sap.com/saphelp_erp2004/helpdata/en/dd/a0193ca1f5e713e10000000a114084/content.htm
Regards,
Pramitha.

Plant not assigned to Controlling area

Hi experts,
I am getting this error-Plant Z199 not assigned to controlling area (when creating sales order)
I have gone through OX19 and then OX18 for company code assignment to plant.
No clue on google. lot of people suggested lot of things.
Srinu S given some solution. But that is also not working.
No solution.
Kindly resolve.
Thanks & regards,
Supriyo

hi,
Did you assign Plant with sales area and company code. please check also in enterprise structure plant assignment with sales area.
Enterprise Structure => Assignment => Sales and Distribution => Assign sales organization - distribution channel - plant
go to OKKP and check Sales => Alternative Authorization=> Heirarchies for Cost
Center and Profit Center for Credit control assign.
thanks
Md. Enayet Hossain

After i have upgraded to Lion OS, this computer has become the worst computer on this planet. Everything is so slow as if i am in 1990's, where you can click on something and take a coffee break. Constantly get errors on MS Outlook and all applications

After i have upgraded to Lion OS, this computer has become the **** computer on this planet. Everything is so slow as if i am in 1990 where you can click on something and take a coffee break. Constantly get errors on MS Outlook and all applications are taking for ever to open up. If you guys can't fix it i am going to throw this out the window. Completely fed up with this. Have always loved apple but this is the worst experience i have with the MacBook Air and its not even 1.5yr old.

There are two ways to upgrade to Lion - one is to install Lion overtop of the existing Snow Leopard and the other is to erase the hard drive, install Lion, and then migrate your applications and user accounts. This second option takes a good deal longer than the first so the preferred method for most is the first method and in most cases it works fine. But not in all.
captfred has told you what I'd start out doing if it were my computer. There's a good chance that you can identify an application or plug-in that's causing the problem. Upgrading the involved item(s) can solve the problem. Of all the Lion upgrades I performed I had a couple that weren't completely successful even though I'd looked for programs and plug-ins that needed upgrading first. I missed a few but I found them after the fact and had happy computers.
There was one computer that still had problems. With this computer I reinstalled Lion right over the old version. (If you didn't keep a copy you'll need to download it first.) I still wasn't satisfied so with that computer I rebooted into the recovery partition (Command R after restarting) formatted the hard drive, installed Lion and then migrated. That did solve the problem.

Error while assigning an application to a user

Hi All,
I am new to Oracle Database Lite. I have created a new user and i want to assign a Sample application which comes while installing the mobile server. But while assigning the Sample application to a user through the application page, i got "ERROR: VIRTUAL PATH IS NULL" and when i wanted to assign the Sample application to a user through the user page, i got "Error in executing " Save application ":oracle.lite.web.resource.ResourceException: CONS-10050: Rollback failure: java.sql.SQLException: Io exception: Connection reset by peer: socket write error "
So can any one help me how to resolve this error so that i can assign the application to a user?
Any help is welcomed.
Shrikant

Thanks Scott. I've also been looking for a pattern of consistency that would point to the cause of the problem but have been unable to find one. I was hoping that others may have experienced the same error and could help to shed some light here.
I dug around some and found that the wwv_flows_alias_idx constraint is a unique index on the alias and security_group_id columns of wwv_flows. My application has an alias that is the same for all installations so I thought that somehow a previously used value for security_group_id was being generated causing the unique constraint violation. Can you tell me how that value is generated during the install process? Is it some sort of hashing function?
Thanks

I keep getting error message, "can't open application PACE because PowerPC applications are no longer supported." I've run Clean My Mac and I still get the error.

I keep getting error message, "can't open application PACE because PowerPC applications are no longer supported." I've run Clean My Mac and I still get the error.

Use the Finder "Go" menu while holding down the option key to expose your User / Library folder.
Look in the Application Support folder for PACE items and delete them.

I receive the error, "No Internet Connection" and my Adobe Creative applications are crashing on a regular basis.

I keep getting the same errors with the damn Creative Cloud application on my Windows 7 machine, which IS connected to a LAN and IS actively connected to the internet at the time the error routinely appears in the midst of tasks. I have checked root certificates, manually checked my hosts file and run the tests outlined above to both Adobe addresses.
In fact, the error kept occuring while I was on an over 3-1/2 hour call with a very through and nice representative from Adobe who had remote screen access at the time (through Adobe connect) and could see the error repeatedly occuring!
Her comment, "This just happens sometimes with this application and there's not a patch for it yet", The problem I was having with Photoshop CS6 and Photoshop CC was so severe that I had to do a SYSTEM RESTORE which then started affecting other Adobe applications because Windows had erased part of the programs (or all of some programs) but Adobe's software saw them as still installed, that she had me uninstall ALL Adobe Creative Cloud applications using the Adobe Cleaner Tool and reinstall everyting from SCRATCH. She and I had tried numerous other ways to repair the problems I was having with updates not installing correctly AND constant program freezing, etc. before this taking this extreme step.
I'm a professional programmer / software / web designer, so I had tried for hours correct the issues the previous night and had tried once overnight to reach someone in Adobe support only to be told of over an hour wait time by the automation and not offered a callback.
Anyway, despite her best assistance this afternoon (and double confirmation that everything tested correctly), it has taken, so far, well over six hours to reinstall only a portion of what I need for my work and on a deadline because the application keeps reporting "No Internet Connection" and I have programs cued to install unattended. I am now way behind schedule on some design projects which MUST BE COMPLETED by deadline and require Adobe's software to be installed and function correctly.
Adding to this, Windows Explorer has repeatedly crashed after installing the damn Creative Cloud application and works normally when it's removed and "cleaned" ... and I've seen so many problems with the install system, etc. that I have to wonder what in the hell the company was thinking when this approach was launched?
I generally have liked -- and indeed loved -- some of Adobe's products in the past, but the recent experience has certainly been costly in time and disappointing.
Many other software manufacters integrate suites, perform updates and confirm licenses without such a buggy, time intensive and unreliable process -- including my own company.
Aside from complaining at this point, I wish somebody from Adobe would provide alternative install methods and / or a fullproof fix for this bug and some of the other installation bugs many of us experience. Any thoughts, advice, knowing that not only I -- but also the Adobe Support Staff Person accessing my computer LIVE -- tried the various "fixes"?

Branching this to a new discussion as the previous discussion was related to the inability to connect and download the installation software.
Rob it does sound like you are facing some connection and stability difficulties. Do you manage your network youself? I am a bit concerned by the fact that you have stated that you periodically loose Internet connection while completing certain tasks. Does this affect your ability to utilize the already installed Adobe Creative software?
I would also recommend reviewing your installation logs to determine if any errors occured during the installation process. Please see Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html for information on how to locate and interpret your installation log files. Please feel free to post any specific errors you discover to this discussion thread.

Error No categorization schema assigned to application area (, , )

Similar Messages

Maybe you are looking for