Message determination

Hi All,
how will seach sequence work in PO prinout outs.   Like new prinout, change prinouts, reminders etc.  For eg; How will the system know the that it has to print a changed PO and reminders to the vendors.
Also, will be there be any indicators to distinguish between new PO prinouts and changed PO printouts.
Regards
Ajay

Hi,
I wanted to know. If i have taken a prinout and issued to vendor.  Now i changed qty and price in PO.  Took another prinout.  will there be any indicator in PO to let the vendor know that the PO has been ammended. 
regards
ajay paliyan

Similar Messages

  • Error in Message Determination of GRN

    Hello Seniors,
    I have done configuation of message determination for GRN by this
    1. Maintain the Printer Name in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Printer Setting
    2. Ensured in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
    3. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2
    4. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for GI/Transfer Posting Documents
    5. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WE01, WE02 and WE03, ensure the foll:
    a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Tr medium is 1
    b. Print Parameter is 7
    6. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Pr Det by Pl/StoLoc, maintain the Output device for all your Plants
    7. In MN21, for Tr Type WE, Print Version 3, maintain Print Item as 1.(Condition records)
    8. While doing MIGO, ensured that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
    Now go to MB90 enter the output type as WE01, Tr m as 1, Sort or. 01, Pro.mode as 01, and executed. System outputted all the material documents that has to be taken print out.
    BUt after this i did a grn and tried to take prinout in MB90, it is not showing. It is just telling " No messages exist for intial processing". I tried with 2 in processing mode, but still it is showing tha same. Kindly solve please.
    Regards,
    JanaMM

    Not this one the earlier one...
    Also did you check whether the GR is properly saved or not...and settigns are done properly or not..which you have given above...
    This is not smart form error...assign the smart form again...
    ADDED:
    Also in the above step ie:
    4. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for GI/Transfer Posting Documents
    Here you shd provide print indicator for GR doc....
    Here add for Particular mvt type 101,201,121,311 etcu2026 Maintain the Print item as 1--Material document printout

  • Error in Message determination for GRN

    Hi Friends,
         I have tried to configure message determination for GRN. As per the steps in the thread i did. The steps i did are :
    GR print out settings
    1. Maintain the Printer Name in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Printer Setting
    Enter the local printer where you want to print your Goods posting document
    2. Ensure that in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
    3. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2
    4. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for Goods Receipt/GI/Transfer Posting Documents
    Here for Particular mvt type 101,201,121,311 etcu2026 Maintain the Print item as 1--Material document printout
    5. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WE01, WE02 and WE03, ensure the following--
    Select the particular Output type then goto Details
    a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Tr medium is 1
    b. Print Parameter is 7
    6. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Printer Determination by Plant/Str Loc, Maintain the Output device for all your Plants
    7. Go to MN21, for Tr Type WE, Print Version 3, maintain Print Item as 1.
    Now the settings are ready for Printing Material doc
    8. While doing MIGO, ensure that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
    9. Now depending on the setting in 5a, the Matl doc is printed. If it is 3, you have to print it using MB90. If it is 4, it is printed immediately.
    After doing this configuration, if i go and execute MB90 with output type WE03, it is telling " no messages for initial processing exist ".
    I want to see the GRN document before printing. what shall i do, kindly help me please.
    Regards,
    Prasath

    HI Manish,
       As u said, i have unchecked the tick mark in migo and i have posted it. Then i went to MB90 and tried with WE01. still it is showing the same message. Kindly resolve plz. Is there any change i have to do in above mentioned steps.
    Thanks&Regards,
    Prasath

  • Message determination and Partner function LS (Logical system) for PO

    Hi,
    I have worked in the past with vendors (VN) as partner roles in a PO, with the message to create an EDI outpout to Partner Type: LI (Vendor), and this works succesfully.
    Now, the idea was to use in EDI, a Partner Type: LS (Logical system) as a receiver of EDI messages (message types: ORDERS) for inbound Purchase Orders to the Partner.
    So, we have set up a respective message condition, with Partner Function: LS  (Logical System), in transaction: MN04 (Create Output-condition records).
    A. When we use ME59N and create a PO with ref. from a PR (created from a sales order), the message determination works well, it reads the condition set in MN04 (condition records for messages), and creates a message (with output type for EDI , medium: 6, and partner function LS: Logical system). Message is created and idoc is sent to partner.
    B. When we try with ME21N, ME21 and we create the PO with ref. to the same PR, either by entering manually the PR in the document overview of ME21N or by selecting the PR (without entering the PR number), i.e with date, the message is not created in the PO.
    Company code is assigned to purchase organization, and so is purchase organization to plant.
    Any idea why there is no automatic message determination in the case of the transaction: ME21N?
    There is a single message condition that is to be read for both cases (trans: ME59N and ME21N).
    Note: If I try ME21N, and enter the output type and partner (=Logical System), manually, I receive a warning message :
    VN006 (Partner XXXX does not exist for partner function LS). If I accept this warning message, then message is saved- idoc is sent.
    However you can not assign a partner function LS to a vendor, in vendor master data, because of message CZ 327 (Can not use this partner role).
    Anyone with similar experience? Thank you for your advice.

    Hi,
    I well understand that the receiving partner can be a partner: Vendor (LI).
    I have seen that working.
    However, in the Partner Profiles (trans: WE20), the receiver was created as a Logical System (LS).
    We want the partner Logical system (LS) to receive the idoc for purchase order (ORDERS).
    After that, I think that the idea is that the LS can generate an idoc for a sales order creation that will then outbound to another partner.  I think that this is the concept.
    The issue is that I have seen that the POs created with transaction: ME59N, have received from message determination (trans: MN04) the message with partner LS (automatically), and the idoc of the purchase order (ORDERS) have reached the partner LS.
    The question is why the message determination fails when creating the PO from trans: ME21N or ME21, with reference to the PR. Message condition is the same and message determination procedure is the same for both cases.
    There is no issue with customizing for the LS in trans: WE20
    (Port processing agent is Active for LS and ORDERS have the proper processing code for application EF).
    I hope I am helping more with this.

  • Output Message Determination for Purchase Order

    Hi all !
    Can anybody please explain in brief, the procedure for Ouyput message determination for Purchase order. (including printer settings)
    I have tried it throgh the Standard Configuration guide. but i am not able to do.
    Please explain step by step including form attachment.
    Thanks in Advance !!!!

    Hi,
    Customization steps for Output of Purchase Order
    1. Condition Table
    SPRO > Material Management> Purchasing -> Message -> Output Control->Condition Tables->Define Condition Table for Purchase Order
    Select:
    Purchasing Doc. Type,
    Purch. Organization,
    Vendor
    2. Access Sequences
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Access Sequences->Define Condition Table for Purchase Order
    3. Message Type
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Types->Define Message Type for Purchase Order
    4. Message Determination Schemas
    4.1. Message Determination Schemas
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Maintain Message Determination Schema
    4.2. Assign Schema to Purchase Order
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Assign Schema to Purchase Order
    5. Partner Roles per Message Type
    SPRO -> Material Management-> Purchasing -> Message -> Output Control-> Partner Roles per Message Type ->Define Partner Role for Purchase Order
    6. Condition Record
    Navigation Path: SAP Menu-> Logistics -> Material Management -> Purchasing-> Master data->Messages-> Purchase Order-> MN04-> Create
    Now you create PO (ME21N) and save it. Go to ME22N and print the PO by giving output type.
    Note1
    Now Check in SPAD (Printer settings) settings & try to check the printer configuration. Check Device attributes, Access methods etc. are maintained in Spool Administration (SPAD) for the selected printer (your local Printer, may be ur using HP01or any but in SAP std is LP01) but consult with your basis consultant regarding above.
    Check the following also:
    Spool generated using SP01 or SP02.
    Output device.
    Local printer settings.
    Paper Tray, Print Mode, Printer
    Note2:
    Check MN04 and NACE t.codes
    Regards,
    Biju K

  • Purchase Order Message Determination  - RVCOMFZZ

    I'm using RVCOMFZZ to fill a specific client field added to structure KOMB and KOMKBEA. I need to acess the ekpo info of the purchase order about to be created. My COM_EKPO table is empty. Is this a bug or it's not possible to acess PO item data when message determination is occuring ? Regards

    Hello,
    in SAP standard, subroutine NACHRICHT_ERZEUGEN in function group MEPO is used for message control in transaction ME21N and ME22N (and more ...).
    For the message determination the function ME_MESSAGES_FIND is called but without any data for structure COM_EKPO. So COM_EKPO will be initial in the functions COMMUNICATION_AREA_KOMKBEA and KOMKBEA_FILL. I think there is actually no chance to access the in-memory information of the purchase order positions while message determination.
    Any other hints or ideas? Thanks in advance.
    Best regards
    Michael

  • Send Document via message determination

    Dear Friends
    We are using DMS (Document Management System) and I would like to know some things:
    u2022 I would like to see at item level an icon which shows if the material have attached documents when I am doing my purchase requisition. How can I do it?
    u2022 I would like to send to the vendor via message determination the Drawings as an attachment with my request for quotation. How can I do it?
    Regards,
    Carlos Pallares

    Hi Manuel,
    This is not available in standard functions. For this you need help from expert Abap'r who cam write a program for sending mail intimation with purchase requisition as a dms attachment.
    Hope this will help.
    Regards,
    Ravindra

  • Send Document via message determination/icon which shows attached documents

    Dear Friends
    We are using DMS (Document Management System) and I would like to know some things:
    u2022 I would like to see at item level an icon which shows if the material have attached documents when I am doing my purchase requisition. How can I do it?
    u2022 I would like to send to the vendor via message determination the Drawings as an attachment with my request for quotation. How can I do it?
    Regards,
    Manuel Nuñez

    Hi Manuel,
    This is not available in standard functions. For this you need help from expert Abap'r who cam write a program for sending mail intimation with purchase requisition as a dms attachment.
    Hope this will help.
    Regards,
    Ravindra

  • How does message determination work?

    Hello,
    I should print an consignment settlement with MRKO. How can I define different output type for different company? I guess I should search the solution in SPRO Material management - Logistics Invoice Verification - Message determination but I did not find the right way. Could anybody help me? Thank you in advance.

    you can make the different ouput types for each company in nace.
    nace is transaction code.
    Regards
    Maqsood

  • Itunes freezes - strange error message - Determining gapless playback info

    I recently tried to suscribe to a new podcast and the accidently stopped the downlaod before it was finished. Itunes then locked up and i could not get out of the podcast listing.
    I closed itunes using ctrl-alt-del and started started again. this time it still went directly to the podcast page and the window on top had the following message: Determining Gapless Playback Information. Analysing XX of YY. As it was counting, the computer froze again. I notice that the CPU usage was up to 100%. Everytime I go on to itunes it does the same.
    I removed itunes, cleaned out the temp directory, etc. and reinstalled again - same problem.
    Has anyone seen this and can you help me?

    Ok - no one seems to be able to help with my problem - is there a way I can go back to an older version of itunes. I have 6.5.0 on a CD, but when I remove version 7.0.2 and install 6.5.0, I get a message that says my library was created with a new version of itunes.

  • Message determination and output control

    Hi! We want to set up message determination procedure per company code. We have several companies and one purch.org, so if only one of the companies e.g. want to output a PO to a Vendor through EDI, this is will apply to all company codes... any suggestions, BADIs, enhancements available? brgs ziggy

    Hi,
    Define a new  PO output condition table which include the company code.
    Cheers !

  • Switch off message determination

    Hello,
    Does anyone know how to switch off message determination while using BAPI_AGREEMENT_MAINTAIN.
    Thanks,
    Rajesh

    Hi,
    Go to:
    SPRO-Materials ManagementLogistics Invoice VerificationMessage Determination-Maintain Conditions--ExecuteCreate Condition: Invoice Verification---
    Output type--give Kons...Select company code...
    Enter data as follows:
    Company code          Name                           Funct                  Medium     Date
    0001                    Company code-0001          PI          1     3
    BNow save...and check..
    Tx
    Uts
    Award if helpfull

  • User Specific Output Message Determination for Purchase Orders

    Hi Sap Experts,
    Is there any functionality in SAP where you can setup specific Output message determination for a user?
    For example whenever User A creates a purchase order through ME21N it will always be emailed to vendor, whereas for User B whenever they create purchase orders it will always be printed.
    Is this possible?

    There is no standard functionality with in SAP.
    To achieve this Create 2 output types accordingly and create customized tables with user id fields

  • PO - Message determination (automatic )

    Hi ,
               Can anyone help in setting up the configuration for automatic message determination for same vendor with two different mediums .
    like ,
    For vendor A ,
    o/p type   Medium                    partner       processing    language
    NEU          5(External send)        vendorA          4                  EN
    NEU          1(Printout)                 vendorA          3                  EN
    Both the mediums should automatically pop up in messages when I create a PO .
    Thanks in advance ,

    Dear Deepa,
    After you configure all the setting for message determination in Config
    1.IMG>MM>Purchasing >Messages>Output control
    2.IMG>MM>Purchasing >Messages>assign output device to purch,group
    3.MN04
    Make sure the vendor partner function match with the message types-partner function.
    Then you'll automatically get the message types generated in PO message after saving the PO document.
    Regards,
    w1n

  • Message Determination for GRN again

    Hello seniors,
       I had configured Output Determination for GRN, it was working fine for a GRN. When i try for next GRN, it is not working. Why is it so, do i need configure any more thing ?
    Regards,
    JanaMM

    Hello manish,
    I have done configuation of message determination for GRN by this
    1. Maintain the Printer Name in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Printer Setting
    2. Ensured in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
    3. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2
    4. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for GI/Transfer Posting Documents
    5. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WE01, WE02 and WE03, ensure the foll:
    a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Tr medium is 1
    b. Print Parameter is 7
    6. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Pr Det by Pl/StoLoc, maintain the Output device for all your Plants
    7. In MN21, for Tr Type WE, Print Version 3, maintain Print Item as 1.(Condition records)
    8. While doing MIGO, ensured that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
    Now go to MB90 enter the output type as WE01, Tr m as 1, Sort or. 01, Pro.mode as 01, and executed. System outputted all the material documents that has to be taken print out.
    BUt after this i did a grn and tried to take prinout in MB90, it is not showing. It is just telling " No messages exist for intial processing". I tried with 2 in processing mode, but still it is showing tha same.  But it was workng fine for first time. Even now if i check for that grn it is showing the print preview. but for new grn it is not showing. what could be the reason.
    Regards,
    JanaMM

  • Message determination for contracts(Purchase)

    Hi ,
              I have to recieve the automatic email of contract to buyer , I have created a
    condition table with
    1)Doctype/Buyer code(Purch group)
    2)Assigned table to acess seq
    3) Assigned acess sequence to message type
    4) Maintained message determination .
    I had used transaction NACE and selected application type EV and maintained condition records for Message type with medium 5 and partner as OA .
    Now when I create contract , I dont see the message type automatic in the contract and when entered manually , it gives me error saying partner not maintained .
    Can anyone suggest me .
    Thanks ,

    First of all check your vendor has the OA partner function and then go to SPRO-MM-Purchiasng-Messages- output control- prtner role per message type- define partner role for outline agreement
    here you have to define for OA partner function then only it will allow you.
    . You must maintain an e-mail address in the address in the vendor master.
    2. The same applies to your own user master. You also have to specify an e-mail address there in order to identify the sender.
    Note that it is not possible to change the e-mail address of the vendor via the SAP purchase order transaction (ME21N, ME22N, and so on). The system only uses the e-mail address of the vendor that is maintained in the vendor master!
    3. For the output type for default values, a communication strategy needs to be maintained in the Customizing that supports the e-mail. You can find the definition of the communication strategy in the Customizing via the following path: (SPRO -> IMG -> SAP Web Application Server -> Basic Services -> Message Control -> Define Communication Strategy). As a default, communication strategy CS01 is delivered. This already contains the necessary entry for the external communication. Bear in mind that without a suitable communication strategy it is not possible to communicate with a partner via Medium 5 (external sending).
    4. Use the standard SAP environment (program 'SAPFM06P', FORM routine 'ENTRY_NEU' and form 'MEDRUCK') as the processing routines.
    5. In the condition records for the output type (for example, Transaction MN04), use medium '5' (External send).
    6. You can use Transaction SCOT to trigger the output manually. The prerequisite for a correct sending is that the node is set correctly. This is not described here, but it must have already been carried out.
    7. To be able to display, for example, the e-mail in Outlook, enter PDF as the format in the node.
    For more details, check out the OSS note :191470

Maybe you are looking for

  • Using Field-Symbols in a user exit to change the importing parameter

    Please don't ask why but I need to use a user exit, changing the importing parameter.  I decided that I could do this using field-symbols. Please excuse my ignorance but I have never used field symbols for something such as this. Here is my goal:  Lo

  • Best way to set up to new iPad?

    My iPad should arrive next week, and I am excited to get it set up. I am curious as to the best way to do so... Between my wife and I, we share a MacBook and an iMac, each with our own user accounts on each computer. We share an iTunes library and an

  • How can I turn off the ink level monitor on a HP Photosmart 7520?

    I have put new cartredges in my printer and it shows the ink levels are low. Can i go into settings and turn that off? If so how?

  • Need to provide effort estimate for an implementation project.

    Hi All, I am working on an RFP and need to give effort estimates related to SD module. I need guidance for you experts in this case. The RFP is from an Indian client. The SD implementaion looks preety vanilla stuff as they have not mentioned any sale

  • Video on iPod - can't play this on the iPod?

    I converted the video to MPEG-4 with videora. it is in iTunes and I can view it there. When I update my iPod it says some of the songs can't play on this iPod. How do I get these 2 small video clips on?