Message entering the exception queue instead of regular queue

Hi ,
First of all , hello everyone.
I'm new to streams technology and i found this forum that seem to be very helpful.
I have a problem - I defined a queue XYZ and then built a capture process queue that enters changes on some scheme to this queue.
The problem is that the changes enters the exception queue table aq$XYZ_table instead the regular queue table XYZ_table.
I checked the capture process and it seems working fine.
does anyone has a direction of why this problem happens?
thanks in advance,
Arnon

Hi ,
here is what i found in the trace file.
*** 2008-08-12 18:03:23.129
*** SERVICE NAME:(SYS$USERS) 2008-08-12 18:03:23.128
*** SESSION ID:(205.1) 2008-08-12 18:03:23.128
08/12/2008 18:03:23
*** 2008-08-13 02:01:07.154
knlc_ProcessMVDD-1: MISSING Streams multi-version data dictionary!!!
knlldmm: gdbnm=TEST.EVEN
knlldmm: objn=-40016372
knlldmm: objv=1
knlldmm: scn=3519960438
knlldmm: opnum=7
*** 2008-08-13 02:01:17.308
knlc_ProcessMVDD-1: MISSING Streams multi-version data dictionary!!!
knlldmm: gdbnm=TEST.EVEN
knlldmm: objn=-40016371
knlldmm: objv=1
knlldmm: scn=3519960509
knlldmm: opnum=7
*** 2008-08-14 02:01:33.888
knlc_ProcessMVDD-1: MISSING Streams multi-version data dictionary!!!
knlldmm: gdbnm=TEST.EVEN
knlldmm: objn=-40016358
knlldmm: objv=1
knlldmm: scn=3521410760
knlldmm: opnum=7
*** 2008-08-14 02:01:46.086
knlc_ProcessMVDD-1: MISSING Streams multi-version data dictionary!!!
knlldmm: gdbnm=TEST.EVEN
knlldmm: objn=-40016357
knlldmm: objv=1
knlldmm: scn=3521411166
knlldmm: opnum=7
i checked on this error and i found that i need to run DBMS_CAPTURE_ADM.PREPARE_TABLE_INSTANTIATION in order to fix it but it also didn't help , and the capture process still not working.

Similar Messages

  • Error: 28005, Severity: 16, State: 2...An exception occurred while enqueueing a message in the target queue. Error: 15517, State: 1. Cannot execute as the database principal because the principal "dbo" does not exist, this type of principal cannot be impe

    I've seen some similar questions, but want to make sure I can get an answer quickly and how to fix.
    Thanks,
    Paul
    spid24s     Error: 28005, Severity: 16, State: 2
    spid24s     An exception occurred while enqueueing a message in the target queue. Error: 15517, State: 1. Cannot execute as the database principal because the principal "dbo" does not exist, this type of principal cannot be impersonated,
    or you do not have permission.

    Hi Paul,
    I also had the same error on one of my servers, and it was because the user that created the database no longer worked for the company.
    So when his AD account got deleted, the database had NULL as owner
    Using the following query I asked for the owners of the databases:
    select name, suser_sname(sid) from master.dbo.sysdatabases
    So changing the owner of the databases that had a NULL owner solved the issue for me.
    use <databasesname>
    go
    exec sp_changedbowner 'sa'
    Thanks for triggering the solution.
    Peter

  • How to read the messages in the JMS Queue using JMX

    Hi,
              I want to read messages in the JMS queue using JMX. I was able to read using QueueBrowser but want to modify priority of the messages using JMX.
              I tried to use JMSDestinationRuntimeMBean but it does not allow us to read messages unless we pass the message Id. Is there any way that I can get all the messages in the queue.
              I am using Weblogic 8.1 SP4
              Can someone please help me in this regard.
              Thanks,
              Kiran.
              Edited by KGudipati at 10/22/2007 1:22 AM

    Hi,
    As far as i know, JMS Object Messages is not supported by XI JMS adapter.
    you need to have the JMS provider to transform the message to bytes messages.
    (Refer to SAP note 856346)

  • CcBPM, how to capture error message in the exception branch ?

    Hi,
    Can I capture error message in the exception branch ? how to do that ?
    because i want to raise the alert including with the error message ?
    Cheers
    Fernand

    Hello Fernand,
    I hope at the end of this you may get some knowledge on Alerts.
    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step XI:Alerts step-by-step. (fundamental Basic)
    /people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i CCMS Monitoring for XI. (CCMS monitoring for XI is enough later
    we configure to Adapter Engine).
    /people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1 Configuring scenario specific E-mail alerts in XI-CCMS: Part-1
    (This is Important)
    /people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2 Configuring scenario specific E-mail alerts in XI-CCMS: Part-2
    /people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3 Configuring scenario specific E-mail alerts in XI-CCMS: Part 3
    /people/federico.babelis2/blog/2006/05/03/solution-manager-cen-and-alerting-configuration-guide-for-dummies Solution Manager CEN and Alerting configuration (Advanced)
    Please reward points if it is useful...
    Thanks,
    Satya Kumar

  • How to view the Messages on the Stream Queues in the MQSeries Explorer

    Hi,
    After you publish the data to the stream queue (SYSTEM.BROKER.DEFAULT.STREAM), how to you see the data on that stream using the MQSeries Explorer.
    I could not see any data on the stream, but I have confirmed that the messages are being published because after I register the subscriber, the published messages do get routed corectly.
    Is there a way to view published messages on the stream queue. any help would be greatly appciated.
    Thanks,
    Rushabh

    Thanks for replying..but what if there are no subscribers registered for that particular topic and the publisher keeps on publishing the messages for a topic. I suspect there should be some way of knowing for the publisher whether it published the messages on the stream queue or not and hence some way of viewing the messages on the queue via the MQSeries explorer..
    Thanks,
    Rushabh

  • How to End the Error message: "enter the password for the exchange account"

    i completed configure Exchange Account on my iPhone, but still show the error message:  "enter the password for the exchange account"

    make sure you don't have 2 step verification in gmail.
    otherwise you need to follow
    Signing in using application-specific passwords
    The codes that you’ll get with 2-step verification don’t work with all applications. There are a few applications that use information from your Google Account (like the Gmail application on your phone, or Outlook) that require another type of code. These are called application-specific passwords.
    Some devices and applications that use these special passwords include:
    POP and IMAP email clients such as Outlook, Mail and Thunderbird
    Gmail and Google Calendar on smartphones
    ActiveSync for Windows Mobile and iPhone
    YouTube Mobile on Apple devices
    Cloud Print
    Installed chat clients such as Google Talk and Adium
    3D Warehouse, Sketchup, and installed applications
    AdWords Editor
    Sync for Google Chrome
    Gmail Notifier
    How to generate an application-specific password
      Unlike a verification code that you receive from your phone or through Google Authenticator, application-specific passwords are generated. You don’t have to memorize them, ever - you simply generate a new one each time you need to sign into a particular application. Follow the steps below to generate your application-specific password: 
    Visit the Authorizing applications & sites page (pictured below) under your Google Account settings.
    Under the Application-specific passwords section, enter a descriptive name for the application (label 1) you want to authorize, such as "AdWords Editor – Desktop," then click “Generate application-specific password" (label 2).
    You'll then see the application-specific password you just created (3). You'll also see the name you wrote in for the device (4) and a link to Revoke (5) -- or cancel -- the code.
    Once you click Done, you’ll never see that application-specific code again. But don't panic: You can generate a new one whenever you’re prompted for an application-specific password by a non-browser device or application -- even a device or application you’ve authorized before.
    Using application-specific passwords
    When prompted for a password when you sign in to a non-browser application or device that accesses your Google Account:
    Enter your username.
    Enter your application-specific password in the password field.
    If your application has an option to remember your application-specific password or stay signed in, you can select that option so you won’t have to generate and enter a new application-specific password each time you access your account from this application or device.

  • How to automatically empty the exception queue?

    Hi.
    I have an exception queue that contains over 140000 messages. Is there some way of making Oracle empty this queue on a regular basis? I have set "dequeue" to "disabled" because I am not interested in this queue's messages, but the queue just continues to grow larger and larger...
    Any help would be very appreciated!
    Regards,
    -Christer

    Is this really not possible? Do I have to make a trigger on the table or manually delete it to stop growing?

  • Some incoming calls and messages display the phone number instead of name

    I recently upgraded from a Blackberry to an iPhone 4s. When I receive a call or SMS on the 4s it often displays only the phone number instead of the name at the top of the screen even though I the correct name and phone number are entered the correct fields in the iPhone address book. I assume there was some kind of conflict when I imported the names from the blackberry (or from my Google contacts list - I can't remember which now). Have any of you experienced this problem? How did you get it resolved?

    Umm,
    I cannot replicate this.
    If I deliberately send to my iPhone Number and reply to that (My iPhone is set to use the iPhone Number) after I have moved Messages behind another app the Notification show my Name and not the number.
    I am using iCloud to sync the Contacts apps.
    8:25 pm      Monday; April 20, 2015
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • Sometimes one message blocked the whole queue

    Now I am developing a MDB in weblogic to consume the TIBCO jms queue and I have deployed the MDB properly. And normally it runs ok.
    But sometimes there is one message in the queue that can not be consumed by the MDB .And also this message blocked the following messages to be consumed. We don't know what is the reason.
    If we redeploy the MDB, it will continue the process and we have checked that the message that has blocked the queue is correct.
    Wait for your answer.
    Thanks a lot.

    I think this may be an example of a "poison message". This is a message that causes an exception during consumption in the MDB causing a transaction rollback and putting the message back on the queue.
    Possible solutions:
    1. Some messaging server allow you to move a message out of the queue after a set number of failed deliveries
    2. Handle this exception in your code - check the validity of the message first and proceed only if the message is valid, otherwise exit gracefully without doing any work.
    Hope this helps!

  • How to keep a back up of messages from the JMS queues?

    Hi,
    I need to keep a back up of messages which are coming in the JMS queue before they get consumed. This is for recovery purpose.
    I checked file store option but it doesnt have any time stamp on messages so dont know how to trace back messges if needed from file store.
    Please let me know if you guys have any idea to handle this.
    Thanks in advance
    Bips

    No. Not with Time Machine at least.
    If you tell Time Machine to backup the external then you will have it.
    Or you can manually copy it to another disk for storage outside of Time Capsule/TimeMachine.
    Allan

  • Is there another way to "Retry" messages in the mail queue?

    While changing service providers and finding out they had port 25 blocked, my queue filled with about a hundred messages. The block was removed from port 25 and all messages that were reported as "timed out" went through. Now I'm left with a dozen messages that "Host or domain name not found. Name service error for name=(verified_domain.com) type=MX: Host not found, try again" The domain and user are good, however the message will not go after clicking "Retry". Is there any way to "fix" these emails? Could this have been caused by a timeout while my server was looking up the address?
    Thanks,
    Keith

    Hi
    Try:
    sudo postsuper -r ALL
    Tony

  • Checking message in the JMS queue

    Hi there,
    Is there a way to check the message is in the JMS queue? I tried to use the QueueBrowser. However, it always return me an enumeration = null
    when I run the following "QueueBrowser.getEnumeration()". I am using JRun 3.0 application server.
    And by the way, how would to know whether the message has been consumed by the receiver in a point to point model? We could still managed to send out messages even when the receiver client is not started. I understand that the receiver client would be able to receive those messages once they are started as the messages are in the queue. However, what if the queue is destroyed (some catastrophic event happen to the JMS provider) before the receiver client is started?

    I have no problem using the QueueBrowser:
          QueueConnection qc;
          qc = qcf.createQueueConnection();
          QueueSession session;
          session = qc.createQueueSession(false, Session.AUTO_ACKNOWLEDGE);
          QueueBrowser browser = session.createBrowser(queue);
          Enumeration enum = browser.getEnumeration();The used JMS provider must support a persistence mode. When the server is restarted and there were messages in the queue, they are restored.
    When receiving messages you can use autoacknowledge mode without transaction which means when receive() is called, the message is deleted from the queue. In transacted mode in addition to receive() you have to call commit() on the session in order to delete the message in the queue.
    When using clientacknowledge you have to call message.acknowlegde() after receive().

  • Popup blocker keeps losing my "exceptions" to websites. every day I have to go back in and enter the exceptions. This has only happened with the last two Firefox versions.

    I go to "tools" then popup blocker "exceptions". (I have the block popups checked.) When I enter "www.paypal.com" and add it in, everything is OK for about 12 hours (or less). I will check to see if the exception is still there within 12 hours and there is nothing in my exceptions. I have added as many as three exceptions entered only to have them all disappear within a few hours.
    This severely cramps my attempt to print shipping labels on the PayPal website.
    I thought this latest version of Firefox cured the issue, but it did not.

    Make sure that you do not use [[Clear Recent History]] to clear the "Site Preferences"
    Clearing "Site Preferences" in "Clear Recent History" will remove exceptions that are stored in content-prefs.sqlite (site specific settings for zoom) and permissions.sqlite (exceptions for images, cookies, pop-ups, software; Tools > Page Info > Permissions) in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder].
    The password exceptions (Tools > Options > Security: Passwords: Show Passwords) are also removed from signons.sqlite.

  • Error message  "Enter the unit of measure" in WebClient ???

    Hello Experts,
    We are working on CRM 5.0 SP 7, IC WebClient and have implemented the BAdi "CRM_SERVICEPROD_BADI" to assign a service product ''INVESTIGATION' whenever user selects service ticket in WebClient.
    However, when confirming a Business Partner and accessing the service ticket, an error is getting displayed stating "Enter the unit of measure".
    We have already mentioned the unit of measure in Product but it seems it is not picking from there.
    Please help me to remove this error.
    Reward points assured for useful answers.
    Regards,
    Amit

    Hi Amit
    Gerhard is 100% correct. Please make sure that your unit of measures are maintained on the product master(trans COMMPR01).
    Use the code below in CRM_PRODUCT_I_BADI to set uom.
      if cs_product_i_badi-process_qty_unit is initial.
        cs_product_i_badi-process_qty_unit = 'EA'.
        cs_product_i_badi-process_qty_num = 1.
        cs_product_i_badi-process_qty_den = 1.
      endif.
    Also, you will find you get error to specify product quantity. This can be done in badi CRM_SCHEDLIN_BADI with code below.
    if is_schedlin_wrk-quantity is initial.
       cs_schedlin_badi-quantity = 1.
    endif.
    Regards
    johan.

  • My iPhone 5 has suddenly stopped sending emails. I get the message "Enter the password for the Account account "(null)"". This has only happened since the last update to iOS but hasn't been a problem on my iPad. What is going on?

    IiPhone 5 has stopped sending emails.

    Hello, Taffy12gwen. 
    Thank you for visiting Apple Support Communities.
    Here is an article I would recommend going through when experiencing issues with mail.
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/ts3899
    Cheers,
    Jason H.

Maybe you are looking for