Message no. V1475 while doing free goods return process

Hi Experts,
I am facing problem while creating Free Goods Return Order.
In return process, I want to create a return order with free goods quantity,it is not coming in the line item.
For Eg:
I created 1 Sales Order. Exclusive Order Qty. 10 + 1(free goods Qty.) -> PGI -> Billing done. Now while creating Return Order (RE) in VA01, system is giving error "Item category for item 000020 cannot be determined" and system not showing free goods quantity in the line Item.
I have done below configuration:
1 - Number Range of free Goods
2 - Maintain Condition Table For Free Goods
3 - Maintain Access Sequence For Free Goods
4 - Condition Type For Free Goods
5 - Pricing Procedures for free Goods
6 - Active Free Good Determination
7 - Determination of Item Category for free good Item and for return purpose i have done
Sales Doc.Type - RE + Item Usage- Blank + Item category -REN + Higher level of Item category- RENN
Pls guide me
Thanks & Regards,
Jyoti Shukla

Hi,
I resolved this free goods return order Issues
I have done below configuration:
1- Do Item category assignment for free goods return process in tcode VA01
Sales Doc type –RE+ Item Category Grp- NORM + Item Usage- FREE + Higher level Item category –REN+ Item category –RENN
2- Do Copy Control for return free goods purpose in tcode VTAF
Header : RE(Tgt)+F2(Source)
Item : REN+RENN(Copy requirements-303+Data T-153+Data T-104+Data T-004)
Schedule : Blank
3 - Now create return order with reference of billing doc., take order type RE so now will show free goods quantity in the line item.
Thanks & Regards,
Jyoti Shukla

Similar Messages

While doing the goods issue system is thruoghing an erro message no VL621

hi ,
actually while doing the goods issue we had put a validation if that filed(serial number) is not valid.like AVAILABLE then the system has through to an error message.but after that error message system is throughing an nother error.
Risk of posting several mat.documents for one delivery->long text
    Message no. VL621
Diagnosis
    Processing has been terminated because there is the risk that the system
    creates several material documents for this delivery.
Procedure
    If this message occurs frequently, please note the exact situation and
    procedure as well as error messages and inform the system administrator.
and we changed that error to warning also still we are getting that error message.
how to stopthis error message.

hi actually not for serial number check.
there is a Z field in serial number master which is used for SIM number.
that SIM number will be validated with available SIM number from another Z table.
after this SIM error system is throughing this VL621 error after transaction terminated message.

Process Order Warning Message while doing the Goods Receipt

Dear All,
While doing the GR against process order via t.code MB31, we are getting a warning message which reads u201CProduction date of bch 110420 (17.06.2011) does not match the prod. date entered (26.08.2011)u201D this happens only if the batch number already exists in the system for the same material code , in this scenario if the user ignores the warning message & posts the document the existing batch number production date also will be over written with current/inputted manufacturing dateu2026 this will collapse the batch traceability. Is there a way to customize where we can have a different production date for same batch number?..
For example:
Batch Number: ABCD
Production date 10.02.2011
Batch Number: ABCD
Production date 11.02.2011
Batch Number: ABCD
Production date 12.02.2011
Regards,
Sivanandan

I'm sorry to say that I find your requirement to be absolutely not logical; a batch is, by definition, a homogenous quantity of a material, that you want to separate by it's characteristics from other, different, quantities of the same material.
If you decided that manufacturing date is a characteristic of the batch, then it has to be unique for one batch.
So, as I see it, you have two options: either decide that manufacturing date is not important and do without, or have different batches for the different dates.

Error while doing post good receipt

Hi Frnd,
I am doing Returns delivery VL02n while doing Post goods receipt i am getting an error saying that
*Document is incomplete: You cannot post goods movement*
The batches are not defined for delivery item 900001
What is this error ?
Regards
Rakesh

Hi Rakesh,
Go to IMG... logistic general ... batch management ... batch determination and batch check ... batch search procedure and check the activationu2026 Activate Automatic Batch Determination in SD
Activate Automatic Batch Determination for Delivery Item Categories
I think you have not checked the Auto batch determination for your delivery item categories.
Please check and then try.
Hope it helps,
Regards,
MT

User Exit for MSC2n( Batch) while doing a Good receipt for an order

Is ther any exit to update the Date1 field(MCHA-FVDT1) in MSC2n( Batch) while doing a Good receipt for an order
Thanks in advance

Hi Varsha,
Try these User Exit.
BATCHCHK Function Module Exits for Check in Case of Batch Change
MBCFC010 Propose batch number on Inventory Management item scree
SAPLCHVW Batch where-used list
SAPLMHD1 Shelf life expiration date
SAPLV01D Determining the initial status of a batch
SAPLV01P Function Module Exits at Time Batches Are Updated
SAPLV01Z CFCs for internal batch number assignment
SAPLV1ZE CFCs for external batch number assignment
SAPLV1ZN CFCs for batch valuation in VB_CREATE_BATCH
Regards,
Vijay

Unit of measure differs while doing the vendor returns

Hi All,
While doing the vendor returns even if I mention the order unit(PO) for return qty,In vendor returns printout it is showing Baseuint of measure,pls let me know problem would be functional side or print programe side
Regards
Raj

Thanks,
Edited by: Hari Raj on Apr 12, 2008 1:21 PM

User exit for updating date field in msc2n while doing a goods rcpt in cor6

is ther anyexit to update the Date1 field(MCHA-FVDT1) in MSC2n( Batch) while doing a Good receipt for an order
Thanks in advance

Hi,
to find the user exits & Badi's for the T-code..
go to table TSTC>enter T-code and execute> get the Program for the t-code..
and go to-se38-->get the package attached to the t-code..
next go to t-code Se15>expand the enhacement tab>enter package under userexit and
                                                     execute you will get the list of exits
                                                     available...
                                                  -->enter package under Badi's tab and
                                                     execute you will get the list of Badi's
                                                     available...
All the User exits are stored in Table MODSAP..
Prabhudas

Free goods return

Hi,
I have a typical problem while doing return of free goods.
I made copy control settings from billing to order (free goods invoice into returns order), it is working ok untill this time , it is copying all the free of charge items into returns order from the referenced invoice as it is.
1) As the customer returned freegoods the returned order also should have zero pricing and zero credit note billing.
But in the returns order it is determining the returns order pricing procedure with value, but the business does not want this way.
2} I also did in a different way this time in the copy control (billing to order) to reprice the pricing elements - now after this it picked up correctly the exact price conditions as it is from the free invoice into return order with net value of the order becoming ZERO. But as the item category determined was that of the returns, it gave net value zero in the incompletion error for the order and could not move forward.
3) I did in one more way, In the item category determination for the returns order type - I gave the 'free goods item category' as Mnlcategory apart from the returns item category being the default. After this I went and changed the determined return item category in the sales order to that of free goods item category manually. After this automatically
the pricing got changed to that of free goods pricing procedure. But after this the return order does not go to delivery at all saying order is not relevant for delivery. So this solution does not work.
So can you please suggest me how this requirement can be achieved ?
Hope I am clear if not you can get clarified again.
Regards,
Murali

Hi,
This may be fine for this case, but as explained earlier the same item category is being used when you are doing the normal returns without any reference (stand alone returns).
So how this will tackle if you remove the pricing indicator totally? I need to complete the return order as usual but with zero pricing- only when it is referred to free goods invoice and when stand alone returns (or) when referred to F2 value invoice, in these cases the returns will be with value.
Please get back to me with your answers.
regards,
Murali

While doing migo-goods receipt for production

I am getting above message while doing migo
please help
Batch 0000000027 has the status <restricted-use>
Message no. M7670
Diagnosis
You are attempting to post a batch with status <restricted use> for a goods receipt.
System Response
Depending on the system setting, the system issues either a warning or an error message.
If the message is a warning (W), the system will accept your entry, but simultaneously issues a warning to prevent you from making the wrong entry.
If the message is an error message (E), the system will not accept your entry.
Procedure
Make sure your entries are correct.
thanks in advance
kailash N. thakkar

Dear,
You cannot change the status of a batch (unrestricted/restricted) in a goods movement, only with the following functions: by maintaining the batch master record manually in MSC2n
Got MSC2N On the initial screen, enter the batch data (material,plant batc).
Select the indicator restricted-use.
Check out the "Initial status of new batches" in transaction code OMAB whether your new batch status flaged for "Restricted" against your material type.
Then go ahead for MIGO.
Regards,
R.Brahmankar

Accounting document while doing Post Goods Receipt

Hi,
The scenario is like this.
1.     Sales order1 is created.
2.     Delivery document created; PGI (post goods issue) is done. Here the movement type is 601.
I want to get back the material (equipment) for some reason; I want to check the material for its condition. If there is any damage, I have to charge the customer. So, the material will be received to Return stock by return sales order with reference to the first sales order1 (Movement type 651); then will be sent to Quality (Movement type 457); if it is not damaged will be sent to unrestricted stock (Movement type 321) by transaction code MB1B.
When I am doing the PGI, the accounting document is created; the Inventory account is credited and COGS (Cost of goods sold) is debited.
When I am doing PGR (Post Goods Receipt), the accounting document is not created (Movement type 651).
I have created a new u2018Schedule line categoryu2019 (YL) for the return process with the movement type 651.
I want to get an accounting document while doing PGR. The inventory account is to be debited; the COGS is to be credited.
Can I get the accounting document by changing the movement type in Schedule line category u2018YLu2019?
Please guide me in this regard.
Regards,
K Bharathi

Hi
Can I get the accounting document by changing the movement type in
Schedule line category u2018YLu2019?
Yes in your schedule line category if the movement type is not 651 then an accounting doc will be created
For movement type 651 there wont be any accounting document
In returns (651M.Type) If a returns delivery exists, the return should be posted in the Sales (SD-SLS) component, not in the Inventory Management component.
Depending on how Customizing for Sales is configured (the movement type is configured in the step Define Schedule Line Category), the delivery is posted to the following stock:
- Blocked stock returns (non-valuated, not unrestricted-use) (movement type 651)
- Unrestricted-use stock (movement type 653)
- Quality inspection stock (movement type 655)
- Blocked stock (movement type 657)
If the given quantity is posted to blocked stock returns first, you can make a manual goods movement posting in the Inventory Management component to transfer the quantity to valuated stock.
So, when the goods arrives in so called "Block stock returns" it is not your property, it belongs to the customer (the ownership has not changed) - it is not valuated. Whiles you post the goods to your own (plant) stock by 653/655/657 it becomes your property that's why it is valuated and material document will be created
Regards
Raja

Convert V1-681 message from information to error (free goods)

Dear SD Gurus
We want to give free goods 1 for every 10 sets. The free goods fuctionality is configured and is working fine.
But the free goods quantity in sales order is open for change. Some user may misuse this functionality. How to control the users from modifying the quantity of free goods.
Secondly, if we change the quantity of free goods in sales order to the original sales quantity system generates an information message "V1-681", can we change this to error message ??
kindly help.

"V1-681", can we change this to error message ??
Yes you can with the help of ABAPer but strictly it is not recommended to change the standard. Rather I would prefer to control your requirement through any of the following sale order exit
a) User exits in the program MV45AFZZ - USEREXIT_READ_DOCUMENT or
b) User exits in the program MV45AFZZ - USEREXIT_SAVE_DOCUMENT
thanks
G. Lakshmipathi

Inclusive Free Goods Return with Reference

Hi Gurus!
Could you help me with my question below
We are tring to create a sales order return with reference to a billing document. This billing document has two items where one is a standard item and the other is a inclusive free goods item.
Example:
1 AAA

Hi
When you have creating the sales order with reference to billing document the items will be copied into the return order without any changes
You can check the controls in the copy control VTAF
Regards
Damu

Free Good Return after Return Sales

Dear Gurus,
I am doin the process of free good..scenario is that i have done the sales to my customer...now he return the good becoz of damage and he want the replacement as a free good....so wht will be the process? what i am doin is that makin the return sales order ---> PGR and after makin the order with order type SD subsiquent free delivery and makin the delivery.....now wht will be the credit memo is it will be issued to the customer or no? logically there will be no credit memo after the returns as we r replacing the good as a free good with diffrent order type SD.. but if u see the document flow u will see the return order is still being processed....so whts the best process for that?
Thanks & Regards,
Mohsin

Hi
Use Fm FORMAT_MESSAGE. After ypu get the entires in the IT_RETURN then pass the same IT to this FM FORMAT_MESSAGE with the necassary parameters so that we can read the contents of that.
Based on this, we can delete the sales orders upon the type of error it is listed in the IT_RETURN table.
Regards
Lekha

Message No. VN108 while doing MB90

Dear All,
While doing MB90 i got this error
*No messages for initial processing exist*
i have done SPRO setting for the same.
Please give me the solution on this.
Regards,
Anant

Hi
Can you please check whether the condition records for the output type/ processing mode etc are maintained in MN21?
Also please check whether the material document is created.
Please check the following parameters in the user profile
NDR-User group for printer determination in Inventory Manag.
ND9 - Print via Output control in IM
Hope this helps you
Regards,
Sasi

Combining quantities of Two line items while calculating Free goods qty

Hi,
Scenario is: On every sales of 50 pieces( 50 pieces can be of different material like Mat A and Mat B) in single sales order,
5 pieces ( of Material A) should be given as Free goods.
Means: I want to total the quantities of all the line item before calculation of the Free goods.
Is it possible in SAP if yes, how to do it?
Regards
Gaurav

Hi,
I have one solution but I have not tried it. You can try.
What you can do is to group all the materials for which you want to give free goods
Add new field Material group from field catalogue to Condition table - create new condition table
create access seq and put this table in it, put acc. seq in cond. type, assign it to free goods determination
Create condition record, enter this material group and qty., I guess here system will total the qty of all the materials that you will enter in sales order assuming you have assigned mat. group in respective material master
Try this and post your feedback
If it works, it will be good for all friends having similar req.
regards,
Sagar

Message no. V1475 while doing free goods return process

Similar Messages

Maybe you are looking for