Message Read Confirmation

Your message with subject, Re: Forte productivity metrics, and dated 13 Dec 96 9:07 was read by Len Leber at Fri, 13 Dec 1996 18:35:01 PST.
==============================================
Len Leber
ATG Solutions, Incorporated
[email protected]

Hi Souvlaki
If you are using Panther Mail you can use a plugin called MailPriority, which sadly doesn't work in Mail 2.0.
There are some work-arounds that get close to offering what Outlook has, including an all-or-nothing terminal hack.
You can read about them here.

Similar Messages

Never ending story: Exchange and Outlook 2010/2013 - Read receipts (reading confirmation) implementation is buggy

OK, I try it again (for the fifth time or so), maybe anywhere in the big microsoft world there is ONE support engineer that is able to recognize a bug and hand it over to the development????
In several cases the read receipt does not contain the sending time of the original message, instead it contains (quite senseless) the time when the receipt itself has been sent.
The only information in the read receipt is the subject of the original mail which may be identical in longer mailthreads to several (dozends of) mails. So in this implementation you are not able to find out to which message a read receipt really relates.
So we cannot prove at all if a single mail in a thread has been read or not. The printout of such a receipt does not have any information that can be used in a meeting or discussion.
Since this situation obviously lasts for several years I'd like to ask
how I can get a working read-receipt-functionality for professional eMail-handling???
It seems that the problem does not lie in the content of the MDN sent by the Exchange server.
If I look into a copy of such a sent MDN with Thunderbird, it tells me for example, that my mail, sent on 15th Juli 2013 14:43:47 (UTC+1) has been read on 15th Juli 2013 14:50:08, which is correct.
But in combination with Outlook I get the same MDN displayed like follows:
Your message at... subject... sent Monday, 15. Juli 2013 14:51:30 (UTC+01:00)... has been read on Monday, 15. Juli 2013 14:51:16 (UTC+01:00) (Text translated from German to English)
So Outlook exchanges the timestamps and falsifies the content of the MDN.
This does only appear in combination with an Exchange server. If I work with a POP3 account and Outlook and send a message to an Exchange 2010 mailbox the correct timestamps are displayed within the returned MDN-message.
All involved systems are set to German (DE-de), the timezone on all systems is UTC+1
Here a small table with my tests
I've used Outlook on all Clients, 2010 and 2013.
Sender: sends initial mail and gets the Reading Confirmation
Receiver: gets the initial mail and sends the MDN
Sender     |     Receiver     |     MDN Display
POP3        |     Exchange   |     correct
Exchange |     Exchange   |     fail (displays wrong "sent"-time)
POP3        |     POP3         |     correct
Exchange |     POP3         |     fail (displays wrong "sent"-time)
It is obvious this cannot be a "feature". This is different behaviour depending on the senders Account type and one of this two scenarios must be a bug.
Could you help me further on this, please?

Almost no - the MS-Support here in this website was completely overchallenged to even understand this issue. I've tried several times to address this in this forum with no success. The "supporters" here had only one target - to quickly get this
"complicated" case off their desks.
The Office 365 support was much more competent and able to understand the problem. They escalated this to the development team (which lasted about 3 months, dozends of telephone calls and about 20 hours working time, which I had to donate to Microsoft freely)
and located the Problem in Exchange Server.
The result was that they promised to fix it in Exchange Server 2013, but there will be no Bugfix in Exchange 2010. I am waiting for the fulfilment of this promise since over 6 months.
Microsoft seems not to have any problem to leave their (professional and very expensive) Exchange software in a buggy state.
My conclusion: If Exchange 2010 runs out of maintenance I'll switch to Linux and Zarafa Server. The Zarafa guys are able to understand and fix their bugs and I do not have to donate thousands of Euros in working time only to get them understanding their
own bugs.
PS: You need only to press F1 in Office, especially in Access in the German language variant and you get an impressing lesson how desolate Microsoft is working today. Pressing F1 in Access 97 or XP lets you know, how much better they were some years ago.
An impressive deep fall down to the ground.
Regards, Conny

My videos on iPhoto no longer play ... the message reads OSStatus error -54. anyone any idea what this might mean?

My videos on iPhoto no longer play ... the message reads OSStatus error -54. anyone any idea what this might mean?

Hi Terence,
FWIW...
I just restored my entire iPhoto library from Time Machine. I'm running Yosemite. After opening iPhoto for the first time after restoring the DB, it asked me to confirm my library location. Then it proceeded to update all the thumbnails. After this was completed, I observed what the OP reported: all photos work normally, but all videos were a.) missing thumbnails; and b.) yielding this error code when attempting to open.
HOWEVER. Doing a Reveal in Finder showed the videos on disk, and they were playable. After quitting iPhoto and restarting it, it *again* said it was updating thumbnails, and now all the videos both have the thumbnails and play correctly from within iPhoto.

Text Message Read Receipt

Can someone tell me how to set up a text message read receipt on a Nokia 6030? So if I send someone a text I will get a text message back once they have received it. Thanks

There are other codes that you can type at the beginning of the message if you want confirmation, I'm not sure of them all..
02 = *0# (Star Zero Hash) No need to put a space after before your text
Orange = RCT (not sure if you have to put a space after it)
Nokia History: 3110, 5110, 7110, 7110, 3510i, 6210, 6310i, 5210, 6100, 6610, 7250, 7250i, 6650, 6230, 6230i, 6260, N70, N70, 5300, N95, N95, E71, E72
Android History: HTC Desire, SE Xperia Arc, HTC Sensation, Sensation XE, One X+, Google Nexus 5

E66 Message reader & In-car kit

I have recently bought the E66 and when using it in my car it is auto sync'd to the stereo by bluetooth, so I can take phonecalls through the stereo.
However when doing this if I attempt to use the Message Reader to read the mss or emails it is silent, once unsync'd with the stereo it plays aloud again. Similarly the tones for incoming emails and mss don't sound.
Is there a software fix for this because I'm assuming that the message reader was designed to be used whilst driving?
Any help greatfully received!

I notice the original post is marked as "Assumed Answered". I read that the original poster can confirm or deny this. If this is not answered (as I assume it's not) can you please mark it as such so that it gets the appropriate priority with Sony Support?
ANNOUNCEMENT: 'Assumed Answered' explained - how us SE Answers members work
Hide Details
Some of you have noticed your threads get marked as 'assumed answered' even though there might not be a solution/answer provided. Keep reading if you want to know why.
Me and my colleagues in the Sony Xperia support team get a list several times a day. This list is called "Email Alert for Unanswered Discussion Questions".
As the name might hint, it contains a list with threads that are unanswered.
All threads that are marked as a question when created ends up in this list if not already answered within 10 hours.
In order for us to get a good overview of the Support Forum we click on 'Assumed Answered' as soon as we have posted a comment, even if it's not really answered. The creator of the thread can then either keep it that way, confirm or deny it.
Either way, we automatically subscribe to all threads we post in, meaning we will get a notification for each new post in every single thread we attend so no post should be missed.
We can also choose to subscribe manually to a thread after marking it as assumed answered (we do this if good answers have been provided by other users already).
by Markus (07-Jun-2012)

Nokia "message sent" confirmation

hi i quite like the feature where after sending a text a pop up message appears saying "message sent" on previous phones however on my new phone nokia 6300
i dont have the "message sent" confirmation
anyone know how to select this feature
thanks in advance imran
phone is nokia 6300

Not sure that delivery reports is what they're talking about. I know what you mean - on my 6230 you just get a confirmation display and message beep to say "message sent" which means it has left the phone whereas the delivery report is sent to your phone when it is delivered to the recipient and could be some time in the future.
I think it may just be a firmware thing that some phones now do not do this. I asked a question to Nokia a while ago about the 6111 as incoming text messages do not automatically display the sender & date/time details when you scroll down past message content but instead have to select options/message details when the message is open. They said it was meant to be that way...!
BRs Phil DeForce (Nokia RAN guru)
"Accept that some days you are the pigeon, and some days you are the statue...."

I cannot update my ipad2 to ios5. Updating through iTunes on pc Windows Vista, Error message reads "cannot connect to iPad Software Update Server. Tried resetting network settings, still not connecting. Tried updating iTunes, still not connecting.

I cannot update my ipad2 to ios5. Updating through iTunes on pc Windows Vista, Error message reads "cannot connect to iPad Software Update Server. Tried resetting network settings, still not connecting. Tried updating iTunes, still not connecting.

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
 Cheers, Tom

Message reader problems after Microsoft Apps insta...

My previous thread was delete due to forum rules infringment.
I describe here again my problem, hoping to have a solution and considering that the problem I faced was not my fault, but it happened after a Nokia official update downloaded via Ovi Suite.
On 15th of April I've installed the Microsoft Apps and after my C6-01 reboot I found that the application "message reader" does not work anymore (tapping on the blue icon in the homescreen had no effect).
The only way to use the message reader was going in the incoming SMS folder, select a message anoose "LISTEN" from the menu. In this way the reader works.
Some days ago someone in this forum suggested me to remove the configured mailbox and try; in this way the reader came back to life and worked again, but if I add a mailbox the problem come back and the reader is malfunctioning again. So the only way to have this application working is removing any mailbox from my C6-01.
Therefore, considering that this problem occurred after an official update from Nokia and not for an user's error, I would like that Nokia tell me how to solve this malfunction.
Thanks for your attention and forgive my poor english.

After the first time I installed Micro$oft App$ I did a deep reset pressing the four keys as described in a web site I've found. After this procedure my C6-01 rebooted without many applications, so I have connected it to Ovi Suite and restored the firmware. The result was a "brand new" and perfect phone, until the new installation of M$ Apps on 11th of April :-(
So we are three Nokia users with the same problem... and we will faithfully wait for a fix ;-)

My Adobe has stopped allowing me to move library books from my PC to my KOBO (both show authorized on the ADE. the message reads : CE_COPY_NOT_ALLOWED - No permission to copy book. It used to work. Any easy fixed for me?(I already tried uninstall and re-

My Adobe has stopped allowing me to move library books from my PC to my KOBO (both show authorized on the ADE. the message reads : CE_COPY_NOT_ALLOWED - No permission to copy book. It used to work. Any easy fixed for me?(I already tried uninstall and re-install)

Welcome to the Club! Got the same Problem and had a really hard time reaching the Customer Support because they were down due to maitenance! Just wrote to their experts chat and hope to get an answer in this life!
I tried to authorize my Computer and eBookreader with a new Adobe-ID, but it says I've done used this ID too often, even though it was brandnew! Can't copy my just-purchased eBook because "Copying is not allowed".
I hold my thumbs for you that Adobe solves this Problem fast enough. Other ways I'll sell my eBookreader and buy the Kindle-Reader from Amazon and say GOOD BYE to Adobe!

HT2443 loops are in the browser when you the loop message reads this file type is not supported

loops are in the browser when you the loop message reads this file type is not supported

gloucester
In case you did not find it, the following is a copy/paste of the Announcement on Premiere Elements 19/NVIDIA GeForce
that appears at the top of this forum.
Premiere Elements 10 NVIDIA Video Card Driver Roll Back
If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing
Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling
back the video card driver version instead of assuring that it is up to date.
Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow
glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this applies
to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary to get rid of
the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working Premiere
Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.
Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
http://forums.adobe.com/thread/1317675
Older NVIDIA GeForce drivers can be found
http://www.nvidia.com/Download/Find.aspx?lang=en-us
A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver roll back can be found
http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
ATR

I am having a major problem connecting to FaceTime. Message reads "unable to connect, check network connections". Yet I am online with Manila, Safari etc. any suggestions.

I am having a major problem connecting to FaceTime today. Message reads "unable to connect, check network connections". I am online, mail works, ex
Tc. This was not a a problem two days ago. Any suggestions?

Could be that the servers are overloaded today.

Error Message reads: this application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem. I have re-installed, SO many times and I still cant open iTunes.

Hi Support,
I am becoming anxious because no matter what I try it doesnt seem to allow me to open itunes.
Error Message reads: this application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem.
I have re-installed, SO many times and I still cant open iTunes.
Please help!!

Click here and follow the instructions.
(98888)

I can't print an item,and each time I attempt to do so a message reads that the item is either spam

I can't print an item,and each time I attempt to do so a message reads that the item is either spam or contains a virus.
What gives?

What is the format of the item you are attempting to print (via ePrint?)? Is it a supported format? See an updated list here.
Although I am an HP employee, I am speaking for myself and not for HP

Unable to load ITUNES onto PC HP, windows 7 Home Version. Error message reads "Application Application Support not found". "Unistall and reload". I have done that 4 times on Explorer and Firefox without success. Help??

Unable to load ITUNES onto PC HP, windows 7 Home Version. Error message reads "Application Application Support not found". "Uninstall and reload". I have done that 4 times on Explorer and Firefox without success. Help??

I had gotten a similar problem, except with "provider services", i believe, but i solved it by copying sqlite3.dll from E:\Program Files\Common Files\Apple\Apple Application Support to E:\Program Files\Common Files\Apple\Mobile Device Support. doing that solved my first problem, but now i have been getting the error described in this topic (unable to load dataclass info... etc.). i tried reinstalling itunes (i already had 9.1.1, and thats what i reinstalled) by using the method described on apples site (using the "remove programs" tool in the control panel) and then downloading and installing itunes. when i opened it again, i still got the same error, and just now i got an error saying "the instruction at "0x00aadb6b" referenced memory at "0x00000008". the memory could not be read" it gave me the option to cancel and debug, or to press ok and terminate the program. I tried pressing cancel, and the popup went away but nothing else happened. a minute later the popup was back, so i pressed ok and itunes quit. Upon opening Itunes again, i got the very same error. sorry for the long post, but its really been bugging me. thanks for any help you might give, and if you need anymore info, feel free to contact me.

Error Message reads: unable to load

Error Message Reads
Resource Not Found
Unable to Load
Sync UI Core
Localized.dll
This is on a Windows operating system
I was trying to burn some Itune content to CD's
Now I have this error message
Is anyone familiar with this message?
Thank you

Even though the following user tip is about iTunes install issues and launch issues, I think it's also worth a try with your error message too:
Troubleshooting issues with iTunes for Windows updates

Message Read Confirmation

Similar Messages

Maybe you are looking for