Message Size tracked from a send shape in TPE is set to -1
Hi
I am tracking the message size from a send shape in my orchestration using Tracking Profile Editor but the value that is stored in the BAM PI <Activity> table for message size is -1.
What might be the issue?
As you can see in the documentation below, when asking for the size of a message, the answer might or might no be there:
https://msdn.microsoft.com/en-us/library/microsoft.biztalk.message.interop.ibasemessage.getsize.aspx?f=255&MSPPError=-2147217396
When fImplemented returns false, it means that the size of the message cannot be determined at this time (I believe it is under these circumstances that BAM will return -1).
The underlying reason for this is because we are dealing with Streams, which at times might be "none-seekable", which means that "right now I cannot tell you the size, unless you load everything".
Morten la Cour
Similar Messages
-
Exchange 2007 send connector does nor respect Maximum message size (sometimes...)
Hi to all
We have 9 email server, 5 Mailboxes, 2 CAS and 2 HT, We began to have problems to send and receive from internet; so I checked the queues and I discovered that some users are sending messages with a size greater than 16 MB, althought internally can send
until 40MB, if they send externally, only until 16MB.
I revised all the configuration:
Organization Configuration/Hub Transport/Global Settings/ Maximum send size (KB):40960
Server Configuration/Hub Transport/HT01/Receive Connectors/Default HT01/Maximum message size(KB): 40960 (only this server can send outside, the other server is in spare)
Organization Configuration/Hub Transport/Send Connector/SendMailOuside/Maximum message size(KB) 16386
We send by an Smart host that is used only by the HT01 to a Symantec server.
With this, we have this situations:
In the queue, I see some users are sending emails with a size more than 16MB outside the organization, I revised their configuration and the "maximun send size" is clear the checkbox (just like my account), the weir is if I try to send an email
with a size more than 16MB, I got the message: "#550 5.3.4 ROUTING.SizeLimit; message size exceeds fixed maximum size for route ##", this is not sense because their account configuration is the same like mine, so the Exchange must not let
them to put the email in the queue...
If between internal users try to send an email with size more than 16MB, this is allowed and it's send without any problem
So I don't know where is the misconfiguration, is permited to send mails with size less than 40MB internally, but externally only until to 16MB, but I din't know why the Exchange system let some users to send (or at least put in the queue) this kind of messages,
my account is in the same DB like the other users...
I hope to be clear in the description of the situation, maybe a patch or some thing, the HT server has the January patch and in april will be applied the last patchs.
Doc MXHi DocMX,
Thank you for your question.
We could run the following command:
Get-TransportConfig | FL max*size
Then, we could check the send connector by the following command:
Get-SendConnector | FL Identity,MaxMessageSize
We could run the following command to check an individual user maximum size.
Get-Mailbox <username> | FL Name,Max*size
In my solution, we could rebuild the user profile that those users could send emails more than 16MB to check if the issue persist.
We could also restart the service of “Microsoft Exchange Transport”.
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Jim Xu
TechNet Community Support -
Maximum message size in AS/JMS?
Is there a maximum message size that the Oracle 10G AS JMS provider can handle? It works fine with 63-64KB message sizes, but if I send anything larger it rejects the message.
I'm pretty sure there's a way to adjust this limit, but I cannot find it.It doesn't seem to throw an error message - at least not in the logs that I have searched through -but rather simply rejects the message. Everything works properly if the message is trimmed to fit the 64K limit.
The message recieved by the java application:
javax.jms.JMSException: JMSRemoteServer[server1:3701]: remote server is closed
at com.evermind.server.jms.JMSUtils.toJMSException(JMSUtils.java:1853)
at com.evermind.server.jms.JMSRemoteServer.assertOpen(JMSRemoteServer.java:691)
at com.evermind.server.jms.JMSRemoteServer.assertOk(JMSRemoteServer.java:700)
at com.evermind.server.jms.JMSRemoteServer.enqMessage(JMSRemoteServer.java:614)
at com.evermind.server.jms.EvermindSession.send(EvermindSession.java:1098)
at com.evermind.server.jms.EvermindMessageProducer.send(EvermindMessageProducer.java:409)
at com.evermind.server.jms.EvermindMessageProducer.send(EvermindMessageProducer.java:201) -
My font sizes change when I send e-mails from Apple Mail.
My font sizes change when I send e-mails in Apple Mail. Sometimes the font style changes, too.
This is unacceptable, as I use my e-mail for business applications.
Any suggestions for a fix?
Thank you.Before you do that I must warn you that also with PC is the same.
It's not the hardware nor the software that makes the difference, because e-mail must obey to certain rules that is RFC.
Maybe what you are looking for is a message that looks like a web page.
You can find something of that kind here.
http://www.jumsoft.com/stationery/
But again, the recipient e-mail could have little differences from the original that depend on many variables
If you are curious enough to know a little more about electronic mail you can read this page
http://en.wikipedia.org/wiki/Email
P.S.
IMHO you already have the best in Hardware and software. It would be a pity to give away that gem -
Questions on sending audio tracks from a short film into Audition for mastering
Ok so basically I have a 4 minute film in which i need to master the audio. I have a few quesions as to how to best go about this.
1: Some of the clips came with 2 tracks off the camera yet they are both labeled channel 1 on the beginning of the clip on the timeline. Their properties are listed as follows:
Type: Windows WAVE audio file
File Size: 16.0 MB
Source Audio Format: 48000 Hz - 24 bit - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Total Duration: 00:00:58:09344
Why are there 2 tracks?
2: Some other audio tracks are just labeled on the timeline as L and R. Both these and the other ones labeled Ch 1 are synced with Pluraleyes from an H4N Zoom recorder so i have no clue why they are labeled different. These one have properties labeled as such:
Type: MPEG Movie
File Size: 69.5 MB
Image Size: 1920 x 1080
Frame Rate: 23.976
Source Audio Format: 48000 Hz - 16 bit - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Total Duration: 00:00:14:20
Pixel Aspect Ratio: 1.0 (1.0)
Yes those are audio files on the timeline.
3: What is the general scoops with these multi track audio files? Do I need both tracks?
4: What would be the best workflow to export all the audio clips into Audition and get them back in the timeline? I heard about importing then in Premiere clicking Undo so you don't have the audio track clips as "Audio Extracted" and you retain the originals, but then just replace them with the Audition audio.
Working with sound is not yet a strong point of mine, i am just a video editor but need to get a grasp on properly handling this.Cameras although they can record stereo audio often only use a small mono gun mic mounted on the camera. The audio menus on the camera give you the option to record either the mono mic to both tracks (ie. Ch1 input to the camrea is fed to both) or as stereo tracks from a stereo mic or as split tracks with onboard mic via Ch1 to track 1 and, say, a radio mic fed via Ch2 to track 2.
Your first files sound as if they came from the first of those options from an onboard mono mic. You don't necessarily need both trakc as they are identical mono tracks in this case.
The second set of tracks were recorded as a stereo pair on the Zoom, hence L and R. They could be stereo or more likely again are double mono tracks where you will only need one of them.
However, depending on the project, it may be more convenient to keep both tracks if any stereo music or effects are going to be mixed in on the multitrack. The final edited video will probably have two tracks on it anyway even if all the audio content is mono. -
How do I select multiple messages from one sender in mobile email to delete them all at once?
I know how to select all of the new messages and mark as read. Now how would I do that if I wished to delete all from one sender or have the same subject, after I search the sender or subject?
Hey Koyster,
Great question. Utilizing iCloud.com, we may be able to purge these emails in a much faster way:
iCloud: Delete email
http://support.apple.com/kb/PH2651
Delete messages
- On your Mac, Shift-click to select multiple adjacent messages or Command-click to select multiple nonadjacent messages.
- On your Windows computer, Shift-click to select multiple adjacent messages or Control-click to select multiple nonadjacent messages.
Thanks,
Matt M. -
how do i track the number of messages sent? i am on a limited sms plan so i want to know how many messages was i able to send in a month. is there an (free) app for it??
Doubtful unless your carrier has an app that includes the option.
My carrier has an app that I can check current usage and past usage with a previous bill and pay the bill. -
on my iMac, when I view messages there is a grey number at the top of the message. This number denotes the amount of messages from that sender and when I view the most recent message in my mailbox (from that sender) all of the older messages load with it and this takes a while for the message to become moarked as "read." I know that I can turn this off because I have mountain lion on my air and i do not have this issue. how can i turn it off?
thanksthanks so much, that fixed it! before I posted this quiestions I kept looking in the mail preferences but I dind't think to look on the View menu.
-
Since installing iOS 7 messages randomly disappear from the messages list. When I scroll through message from 'Fred' has disappeared. I go to 'Fred' in Contacts, go to send message and there are the messages. 'Fred' messages then re-appear in Message list. Why? How to stop messages disappearing from message list? Thoughts?
Since installing iOS 7 messages randomly disappear from the messages list. When I scroll through message from 'Fred' has disappeared. I go to 'Fred' in Contacts, go to send message and there are the messages. 'Fred' messages then re-appear in Message list. Why? How to stop messages disappearing from message list? Thoughts?
-
When typing the name of the contact I want to send a text message to, names from my contact list no longer pop up as suggestions. Can anyone help me with this?
There's always a way to reset the device jmn33! Thanks for keeping us in the loop. To process a full reset/restore on the device please visit http://vz.to/12TLCsR. Please keep us posted once this is completed, thanks!
MatthewS_VZW
Follow us on Twitter @VZWSUPPORT -
Can we send a message to Websphere from two different schema?
Hi,
I have two schema in my test environment and i send a AQ message to WebSphere from one of them.
Now i'm going to apply all the changes from this schema to the other one and then two messages will go to the same destination in IBM WebSphere!
Do you think i might face a problem in this way or i should disable the previous one?
Regards
/HesiHello,
it surely depends on your setup logic for the content of your target MQ messages. From the point of AQ there is no problem.
Your two AQ queues don't know anything from each other. You have to check if the messages can be arrive twice at
your destination MQ queue.
Kind regards,
WoG -
i can't send an e-mail from thunderbird, it was working well though , suddenly it says the following message:An error occurred while sending mail. The mail server responded An error occurred while sending mail. The mail server responded: (Alis-MacBook-Air.local) [46.138.187.135]:51054 is currently not permitted
OR
i have changed the port from 587 to 465 but still cannot send e-mail, it keep sending and sending for 5 minutes and respond is time out?Can you post your Troubleshooting Information?
Help (Alt-H) - Troubleshooting Information -
SOAP message size limitation for sender soap adapter
Hi All,
We are facing critical production issue in case of sender SOAP Adapter,
If the sender soap message is having 114359 Bytes than the Third party is getting exception and SOAP request is not reaching XI.
If the message size is less then 100kbytes then no exception will come.
Is this a limitation that SOAP message size should not exceed 100kbyte?
Thnaks in advance
Best Regards,
Harleen Kaur ChadhaHi ,
Thanks for your inputs,Could you please tell me which hardware configurations are you talking about?
Are you people talking about harware configurations for XI?
Best Regards,
Harleen Kaur Chadha -
how can i make it so when i send a message on my laptop that it come from my email and when i send a message on my phone is sends as my phone number. i want them seperate
Hey mims1212,
Thanks for the question. You can configure what address you start new conversations from on both devices:
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
Please note that this will only work for new conversations, and will also be affected if another iMessage user starts a conversation with you (ex. if a friend sent you a message to your phone number, you will still receive that on your Mac, and you will be replying from your phone number).
Thanks,
Matt M. -
I changed from IE to Firefox. When I click on a shortcut in an email, I get the message "an error occurred in sending the command to the application" in Outlook. It doesn't stop Firefox opening and going to the site, but is annoying.
See:
*http://kb.mozillazine.org/Windows_error_opening_Internet_shortcut_or_local_HTML_file_-_Firefox
Maybe you are looking for
-
How do I sync MacBook Pro to my Mac Pro (everything - not just mail, but every single file.
I can hook my laptop to time machine when I get home, then I can use migration assistant to put exact data on user account on my Mac Pro desktop computer, but that is silly. 10 years ago or more, I just connected the laptop with my desktop computer a
-
ICal calendars not syncing with iPhone 4 running iOS 4.0.2
I have an iPhone 4 running iOS 4.0.2 I'm using iCal on my MBP running Mac OS 10.6.4 I have a MobileMe account. Never had an issue with calendars syncing with the iPhone previously. I am using MobileMe Calendar Beta. This now displays my calendars in
-
To view who has released vendor invoice for payment.
hi team, we have a PO for GR based IV. we received invoice for more qty and was accepted. when i simulate in quality, system is working fine. but the client is saying that system is not blocking the invoice. but i feel that system blocked it but it i
-
Have a look at http://labs.adobe.com/downloads/flashplayer.html Setup for "Flash Player 12 Beta Content Debuggers (for Internet Explorer only)" is updated to version 12.0.0.54 Setup for "Flash Player 12 Beta Installers (for Internet Explorer only)" i
-
Eliminate internet connect message?
how to a eliminate/suppress a message that pops up approximately every 30 minutes: "internet connect - disconnect - stay connected." i would apprciate any replies. thanks [email protected]