Message type to be defined plantwise

Hi,
We have defined a message type to post PO from MM to SRM(SUS).The message type currently is vendorwise , we need to make it plantwise.
Please advise.
Thanks in Advance,
Manu

Can you use addition DISPLAY LIKE dtype. Dtype is "A", "E", "I", "S" or "W" in upper-case letters.
If you use another letter the message don't show the icon.
Example:
Message I305 DISPLAY LIKE 'N'.
The message is without icon but when display show the letter N like this:
N:Message
Regards
Angelo.

Similar Messages

Variable initialized with wrong message type

Hi,
I have a BPEL process variableA of Message type A as defined in the partnerlink WSDL file. This variable get initialized during operation A from the partnerlink. The WSDL has another message type B defined for another operation B.
During runtime when operation A is called variable A gets initialized with message type A, however when operation B is invoked with mesage type B variableA gets initialized again with the content of message type B even though it's defined to be of message type A. Below are the snippets from the WSDL and BPEL process file
WSDL file ..
<message name="MessageTypeA">
<part name="payload" element="mpx:MessageARequest"/>
</message>
<message name="MessageTypeB">
<part name="payload" element="mpx:MessageBRequest"/>
</message>
<portType name="MutilPort">
<operation name="A">
<input message="tns:MessageTypeA"/>
</operation>
<operation name="BA">
<input message="tns:MessageTypeB"/>
</operation>
</portType>
Process BPEL file
<variable name="VariableA"
messageType="tns1:MessageTypeA"/>
<variable name="VariableB"
messageType="tns1:MessageTypeB"/>
<pick name="Pick_2" createInstance="yes">
<onMessage portType="tns1:MutilPort" operation="square"
variable="VariableA" partnerLink="Multiplex">
<sequence name="Sequence_1">
<assign name="Assign_2">
<copy>
<from variable="VariableA" part="payload"
query="/ns1:MessageARequest/ns1:Operand1"/>
<to variable="ResponseVariable" part="payload"
query="/ns1:AllOpProcessResponse/ns1:Result1"/>
</copy>
</assign>
</sequence>
</onMessage>
<onMessage portType="tns1:MutilPort" operation="addition"
variable="VariableB" partnerLink="Multiplex">
<sequence name="Sequence_2">
<assign name="Assign_1">
<copy>
<from variable="VariableB" part="payload"
query="/ns1:MessageBRequest/ns1:Operand5"/>
<to variable="ResponseVariable" part="payload"
query="/ns1:AllOpProcessResponse/ns1:Result1"/>
</copy>
</assign>
</sequence>
</onMessage>
</pick>
Please can anyone shed some light on why and how this can happen and where is it going wrong.
Thanks,
Shishir

Looks like the destination which is used by your EG has default settings,
particulary the RedeliveryLimit param. If it is set to -1 (default setting)
WL will try to redeliver the message forever in case of any error. Just set
it to something else. You can also specify an ErrorDestination and hadle
error messages specifically in it.
Denis.
<Gunjan Shukla> wrote in message news:[email protected]..
Hi,
We are using WLI 8.1, in one of our applications I have a message broker
channel configured to listen to rawdata type messages. A jms event
generator is configured to publish messages, which are sent to a jms
topic, on this channel.
We have no control over type of messages sent by client applications, when
some client application sends an ObjectMessage instead of BytesMessage,
following error is thrown
####<Jun 1, 2006 10:47:14 AM GMT-07:00> <Error> <WLW> <P931467> <cgServer>
<ExecuteThread: '11' for queue: 'weblogic.kernel.Default'> <<anonymous>>
<BEA1-004324CB0C4F26C12C0A> <000000> <Cannot publish non-BytesMessage to
channel of type RAWDATA>
####<Jun 1, 2006 10:47:14 AM GMT-07:00> <Error> <WLI-Core> <P931467>
<cgServer> <ExecuteThread: '11' for queue: 'weblogic.kernel.Default'>
<<anonymous>> <BEA1-004324CB0C4F26C12C0A> <BEA-489048> <Not a
BytesMessage>
server keeps throwing this exception and fills the logs and ultimately
server needs to be re-started.
Can somebody point me to whether its possible to catch these exceptions in
a process?
Or alternatively is it possible to somehow ignore the messages with
mismatched message type?
Any ideas are greatly appreciated.
Thanks and regards,
Gunjan

Could not determine recipients for message type HRMD_B

Hi,
I am getting below Error in SRM when transferring Org Structure data from HCM system to SRM system in a Idoc. I am using Message type HRMD_ABA and not HRMD_B. I didn't maintain Distribution model for HRMD_B. But in my IDOC status I am seeing below error message for Message type HRMD_ABA Inbound to SRM.
Only I am seeing HRMD_B message type in transactions WE81 and WE82.
Any idea? I appreciate your help.
Could not determine recipients for message type HRMD_B
Message no. B1003
Diagnosis
An IDoc of message type HRMD_B was passed to the ALE layer, but the three receiver fields in the header record were not filled. In this case the ALE layer tries to determine the receivers from the entries in the distribution model. There are no entries available in the distribution model for the above message type.
Procedure
Define the receivers in your distribution model for this message type or deactivate distribution for these message types.
Thanks,
Shears

Hi Shears
Did you find soulution to your issue ??
thanks
Anup

Message no. B1003""Could not determine recipients for message type ACPJMM""

Hi All,
While posting GR in MIGO, an error is showing. I am attaching the error description.
""Could not determine recipients for message type ACPJMM""
Message no. B1003
Diagnosis
An IDoc of message type ACPJMM was passed to the ALE layer, but the three receiver fields in the header record were not filled. In this case the ALE layer tries to determine the receivers from the entries in the distribution model. There are no entries available in the distribution model for the above message type.
Procedure
Define the receivers in your distribution model for this message type or deactivate distribution for these message types.
Yesterday it was not coming and GR was getting posted.. I was doing configurations for CIN and day before yesterday everything was done,all the registers were getting updated. For that I did many customisation in SPRO. I did settings in tax ion goods monement. and in Material master to assign screen sequence for foreign trade data screen. Is any customozation triggerring IDoc? Earlier also this came, that time we got client copy, but the problem is recurring. Its very urgent as we are going to transport SPRO settings to production.
Solutions will be rewarded.
regards
B Shar
Edited by: Ian Wong on Jul 4, 2008 4:48 PM

Hi
If you are not working with ALE & this message comes, then somone has mistakenly activated ALE linkages for IDoc Output in Accounting.
if you want to keep this active & go forward, you need to complete the Distribution model customizng in BD64.
Thanks & Regards
Kishore

Why need message type when u create data type...

why need message type when u create data type...

Hi,
A message type comprises a data type that describes the structure of a message. At the following points in SAP Exchange Infrastructure you can refer to the message to be exchanged at runtime by using the message type:
·        More than one message interface can use the same message type. For example, an asynchronous outbound message interface and an asynchronous inbound message interface can reference the same message type because the request message does not need to be mapped.
·        When defining a message mapping you can directly reference message types to map messages from an outbound interface to messages from a receiver interface.
For technical reasons, a data type is not sufficient to describe the instance of a message. In XML schema, data types are defined as abstract types that are not yet fixed to an element. You can only describe an instance of a message when you have specified a data type as an element type. Therefore, a message type defines the root element of a message.
A message type does not define the direction of the message exchange, in other words, whether it is a request or a response. In exceptional cases you can use the same message type for both the request and the response message.
A message type has the following characteristics:
·        It comprises exactly one data type, which determines the content of the message to be transferred.
·        It is identified by a name and an XML namespace. The name (together with the namespace) of a message type is located in the uppermost tag of the message to be exchanged. This is an element tag.
You have defined a message type GreetingRes that references a simple data type of type xsd:string. The XML namespace of the message type is http://sap.com/xi/myExample. The corresponding payload might look like this:
<?xml version="1.0" encoding="utf-8" ?>
<ns1:GreetingRes xmlns:ns1="http://sap.com/xi/myExample"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
   Hello Mrs. Miller
</ns1:GreetingRes>
You can specify how a message type is used in more detail in the description
hope this will help you.
regards
Aashish Sinha
PS : reward points if helpful

Idoc message type which contains all data types

Hi,
I need idoc type or name which consist of all data type sap has defined. There are nearly 24 data types.
Pls help..
Regards,
Taj

hi,
you will not have any message types which contain all data types.
message types will be defined based on specific data.
for example :
MATMAS - Material master
DEBMAS - Customer master data distribution

Inutilização de NFe: Log de erro Message type 8 is not defined

Olá Pessoal,
Estamos com um erro aqui muito semelhante ao descrito na Thread: [Skip número da NF não autorizada|;.
Solicitamos a inutilização de uma nota writer de saída que foi barrada no Monitor GRC por erro de validação e por isso estava com status 8 na J1BNFE (ECC). A inutilização foi feita com sucesso, o status no GRC está correto, mas no ECC a autorização ainda não constava. Executamos o report XNFE/UPDATE_ERP_STATUS_DIAL e ao fazermos a msg de "erro ao atuzalizar ECC". No monitor da J1BNFE a nota agora aparece com o seguinte log de erro:
Message type 8 is not defined
Message no. J1B_NFE018
Diagnosis
The messaging system passed a value for the message type to the back-end system (field I_MSGTYP) that is not defined in the back-end system.
System Response
The back-end system cannot interpret and process the inbound message.
Procedure
Configure the messaging system in a way that it transfers only allowed message types to the back-end system via the inbound interfaces J_1B_NFE_XML_IN or J_1B_NFE_XML_IN_TAB.
Achei a thread mencionada acima com o mesmo erro e verifiquei a aplicação das notas, já que o problema foi solucionado com a aplicação das mesmas. Eis os status:
Nota 1298283 (ECC) - Não relevante pois estamos no ECC 6.0 SP17;
Nota 1376324 (ECC) - Não relevante pois estamos no ECC 6.0 SP17;
Nota 1413636 (ECC) - Completely Implemented na SNOTE;
Nota 1376901 (GRC) - Não relevante pois estamos no GRC SP13.
Aparenmente alguma coisa ainda está faltando.. mas nao sei o que é.
Desde já agradeço,
Daniela Machado

Verifique esses passos da nota 1298283 (no ECC)::
Change Domain J_1BNFE_MESSAGE_TYPE
Use transaction SE11
Select Domain and insert name J_1BNFE_MESSAGE_TYPE
Push Change.
Select Tab "Value Range".
Insert
Fix value Short text
8 Authorization to Skip a NF-e with Validation Error
9 Rejection to Skip a NF-e with Validation Error
Maintain table J_1BNFE_MAP_TYPE
Use transaction SE16 and display the table entries.
Push CREATE (F5)
Insert records
MSGTYP DOCSTA SCSSAT
8 Space A
9 Space B
At.,
Bernardo Braga
Edited by: Bernardo Braga on Jul 1, 2010 10:06 PM

Defining input message Type for webservice interface with out input

Hi all,
I am configuring a scenario RFC -> XI -> Webservice. My sync webservice doesnot need any input. it genrates a random number which needs to be sent back to the RFC. How can i define an input message data type with out any data? As the interface requires both input and output data types in XI?
I tried a dummy data type with a single string input and didn't map it. but its not working because of name space issues. i specified a seperate XML name space in Message Type but i get a Target URL as the name space in the request which i provided in the SOAP reciever adapter.
Any help will be appriciated
Thanks and best regards,
Kulwant Singh

Hi
Can u chk the webservice request using test tools like stylus studio or xml spy and ensure that the same request is going out of XI .
make sure that you have changed the default xml namesapce in the target MT.
rgds
Arun

Define fault message type for RFC

Hi,
How can I define the fault message type for RFC so that when I import RFC from another server to XI, I can view this Fault type.
So far I could only see Request and Response type .
Thanks

Hi Rokie,
Acc. to me by default we are having only request and response mesages for RFC and in case some exception/fault is there the RFC will through this in the response under the Return parameter having msg,id number as sub fields which you can map to fault message type.
Sachin

Can not create mapping fro message type defined in a folder in PI

Hello
in PI 7.1, there is feature to created folder which is very good to organize you objects in the way you like. In ESR, I can create a new folder, and then create data type and message type within the folder, however when I try to create a message mapping, I can NOT use message types created in any folders, only the message types created in the SAP pre-defined node Message Types can be used for message mapping. Is it a bug? if yes, in which SP will it be fixed? is there any go-around for this issue by now? I am using PI 7.1 SP5.
Thanks
Eric

Hi Eric,
It is not the flaw.
You have two options :
1) You can directly drag the Message Type into Message Mapping Source and Target Message area
2) Select the Signature Tab -->Create the New Entry of Message Type and Select from the Search Result
regards
Gangaprasad

Regarding Custom defined message types

hi guys,
i never got to work with custom defined message types but got to work with already defined message types and i just want to know why exactly do u need this and can any one please share their experience, why they have to design a custom defined message types especially in SD and MM with an example.
thanks very much,
pavan.

What do you mean by custom message TYPE? We create custom messages all the time at my company, by never a custom message TYPE. Not sure what you mean here.
Regards,
Rich Heilman

Inbound Processing with reference to user defined Message type

Respected Readers,
I have created a segment with fields
Matnr
mbrsh
mtart
vpsta
maktx
meins
matkl(Total 7 fields)
I have created a idoc also and a message type and assign the idoc with message type.
Now i have set the communication partners also and created the distribution model with my message type and distributed also to the reciver side.
Now as it is not the standard message type like MATMAS so we cannot use the tcode BD10 to send the material.Instead of it i have to write the program to create the idoc for sending it.
So i have created the program for the generation of IDOC.
Upto here picture is clear.
In the case of Inbound in standard we use the tcode BD11 to get material but same thing as we are not using the Standard Message type we have to create our program.
Now in this case i have written a function module and that function module is attached to the process code and process code is attached to the message type and message type is attached to the partner profile.
i have done the assignments in we57 and bd51 also.
Now idoc is created in the inbound side with status 70.
but i am not getting how to upload this data in standard tables Mara and Makt.
So that if i go to tcode MM02 and give the respective Matnr ,it should display that material.
First tell me what i have done is the right procedure or i have to make somechanges somewhere .
Secondly if you please give me the function module code for inbound processing to upload the data in this standard table( mara ,makt) so that material is created in the reciver side also.i will be very thankful to you.
I am only using seven fields in creating the material.
Please kindly send your answers and not links .
Thanks

i have done the same thing and used same parameter in import ,export ,tables and exception tab.
i have written some code also .
But i am not getting the code to upload the data in the standard tables so that material should be get created automatically as soon as the data get uploaded
in tables.
Somewhere i have read that you have to use the BDC concept Call transaction method to upload the data.
But how to use the BDC code in Function module , i am not getting.
Please can you send any example of code for this task.

Define Message Types for Purchase Order.

Hi,
is it true that message type "NEU" doesn't require to fill
the smartform field in Processing Routines ?
Yours truly

If you are using the std form then you dont need smart form
std form is SAP script adn smartform is diff form then SAP script

ERROR in MIRO : An exchange rate type is not defined for country IN

Experts:
When I try to enter the invoice received from the vendor, I am getting the following message.
An exchange rate type is not defined for country IN
Message no. FF802
Can anyone provide me a solution for this?
Thanks,
Vijai

This is the explanation given in note 974619 for the above error message
Summary
Symptom
When you post an FI document, the system issues error message FF 801 or FF 802.
Other terms
Plants abroad, FF 801, FF802
Reason and Prerequisites
You use the 'Plants abroad' function.
See Note 882132 for more information about this.
Solution
If the 'Plants abroad' function is active, additional fields appear when you maintain the country global parameters (transaction OY01, table T005):
- Country currency       (Field WAERS)
- Exchange rate type     (Field KURST)
- Net discount base      (Field XSKFN)
- Net tax base           (Field XMWSN)
You must maintain the fields 'Country currency' and 'Exchange rate type'.
Otherwise, the system issues error message FF 801 or FF 802.
thanks
G. Lakshmipathi

Message interface with two types of message types

Hi experts,
I am having problem that a proxy cannot be generated because of the (mixed) types of the message types that the interface is using.
The first message type is defined in the repository and another is defined as an external definition, imported in from an outside source.
Here is the SAP message I received when I tried to generate the proxy for this interface.
+++++++++++++++++++++++++++++++++++++++++++++
Interface uses external and internal message definitions
Message no. SPRX122
Diagnosis
In a message interface you can use messages from different sources:
1. Message types and fault message types edited in the Integration Repository
2. Messages imported into the Integration Repository (external definitions, RFC, IDoc)
In the current message interface, message types from different sources have been used.
Since messages from these different sources must be handled differently during proxy generation, such a mixture of messages within a message interface is not possible.
System Response
The interface cannot be generated.
Procedure
Change the interface definition accordingly in the Integration Repository.
++++++++++++++++++++++++++++++++++++++++++
The imported xsd is quite large and also contain many large includes. I don't have the option of creating the message type manually.
Any suggestions?
Thank you,
-michelle

Hi all,
I tried several things and the problem is still not resolved. This is what I learned.
First of all, I believed the SAP message about mixing of internal and external message is misleading or even wrong. I tried with both message types being external but I still get the same message that the interface has one internal and the other external message type.
Secondly, since Arvind suggested that I might have used an xml element that is not currently supported by ABAP proxy, I then change to another definition with the most simplest elements. I then attached this other definition to the interface and tried generating the proxy again. I still get the same system message that I am using mixing of message types in one interface.
My conclusion is XI still is not capable of generating ABAP proxy from external definition.
Does anyone have any comments/suggestion/experience on this issue?
Best regards,
-michelle

Message type to be defined plantwise

Similar Messages

Maybe you are looking for