Messages in BPM with Status Waiting

Hi,
I have created BPM for Message Collect like the standard SAP Pattern BpmPatternCollectMessage. But for terminating Message Ive used Message type (Message interface) different from the Message type in the main Fork section. I thought that it is possible correlation between two message Interfaces with different Message types?
Any way I had an Error in my BPM and after a test the Status for my Messages is Successful for inbound and Waiting (Message being sent) for Outbound. All my Messages are collected in a Queue, Wait step is created but BPM dont proceed further.
So Ive made some changes in my BPM and tried with a new Test but it works with the old Version of the BPM and collects the Messages in the same Queue. So any idea how can I use the new BPM version? Should I Delete Manually the old Messages with Status Waiting or there is also different way?
Thanks
Naycho

>>>I thought that it is possible correlation between two message Interfaces with different Message types?
yes it is
>>>>All my Messages are collected in a Queue, Wait step is created but BPM dont proceed further.
have you registered queues on XI? TCODE - SXMB_ADM - manage queues ?
>>>Test but it works with the old Version of the BPM and collects
try looking at: SXI_CACHE - integration process- check if your new process has 0 status - activated
Regards,
michal

Similar Messages

How to delete the messages from sxmb_moni with status cancelled

Hi ,
how to delete the messages from sxmb_moni with status cancelled
Is there any report for this
Regards
Suman

I think just for deleting the jobs you can do this only
Scheduling Delete Jobs
To schedule delete jobs, proceed as follows:
       1.      In the Integration Engine -
> Administration menu, choose Schedule Delete Jobs.
       2.      Select the job(s) to be scheduled.
       3.      Specify the start time and date.
       4.      Specify the period you want to use and choose Schedule.
For an overview of all jobs, choose Jobs.

Message Monotir: Adapter Engine Status:Waiting

Hi,
We made a copy of our DEV XI instance and I'm currently testing it.
HTTP to RFC and HTTP to FILE scenarios are working perfectly. My problem is with FILE to FILE scenarios. The file gets read and archived but I don't see anything in SXMB_MONI. When checking RTWB, Message Monitor I can see the message but it's status is waiting. I've checked SMQ1 and SMQ2 and they are empty (these were cleared down earlier today and we followed that with a restart). Any suggestions where else I should look.
Many thanks

Hi,
Check this blog
XI : How to Re-Process failed XI Messages Automatically
and cancel the messages after it goes to system error.
Thanks!

How to CANCEL/RESEND messages in Adapter with status system error in bulk?

Hello all,
I d like to know how can I CANCEL or RESEND messages with status error SYSTEM ERROR in adapter framework.
Messages failed because of receiver system un-availability. Now, we have more than 50.000 messages stuck, waiting for being resent or cancelled.
But from the Message Monitoring Tool at Runtime Workbench Monitoring, I can only process up to 200 messages each time.
So, its practically imposible to do it manually.
My question is how can I deal with that amount of messages? Is there a way to process them in bulk and get them cancelled in only one step/action?
Many Thanks in advance.

Hello, I hope you are doing fine!!
The most common way to cancel these messages is through the Runtime Workbench as you have mentioned youu2019ve tried.
Just one note: Once you are on the Message Monitoring screen -> Filter (where you can select the dates, message status, etcu2026), there is a Dropdown box menu at center of the screen called u201Cmaximum Numberu201D where I believe you said you can only see 200 messages.
You may try to select u201C10.000u201D there and then cancel these messages from there.
However, if you prefer doing this in one go, you can do this by changing the status of the messages from u201Cerroru201D to status u201Cdeliveredu201D by executing following SQL statement at the database level:
UPDATE <DB Schema>.XI_AF_MSG SET STATUS='DLVD' WHERE MSG_ID='<MSG ID>
AND DIRECTION='<INBOUND OUTBOUND>'
Cheers,
Jorge Eidelwein

Shared Apps (iTunes) with status "waiting" on iPhone

We do have 2 iPhones. We do share Apps which can be done via iTunes (we're in the same network, the same household). So Apps bought with one iPhone can be used on the other one as well. That was cool stuff! WAS, because it's not anymore. Since the latest update there are some Apps doubled, one of a pair is OK the other one is on status "waiting".
Shutting down the iPhone, restarting
Syncing with iTunes
Using the one and the other Apple-ID
we've tryed everything we could imagine.
But still there are (only on one of the two iPhones) doubled Apps, "hanging around", they can not be deleted (no X to delete 'em).
Any idea how to solve this?
(dont tell me to erase the iPhone completely and set it up again )

What id shows at the bottom of the Featured tab in the App Store app ? Try tapping on that and the log back in with your account - but if the apps were downloaded (either directly on the phone or on the computer's iTunes that they were synced from) by your husband's account then only his account will be able to download updates to them.

Messages stuck with status "WAITING"

Hi Everyone,
We have implemented PI interface a year ago with JDBC sender (ORACLE) and RFC receiver (SAP) to transfer the goods movements from legacy to SAP and give back the current stock after the goods movement is posted back to ORACLE system.
The interface has been working fine for over an year now but suddenly since 15days we are experiencing the issue of delays in message transmission where-in in SXMB_MONI we see a time difference of 60-90mins between start message start time and end time...
Nothing has been changed from development/design perspective and am unable to understand the reasons for this delay.
Also for the above scenario the message status in MESSAGE MONITORING shows waiting status and i have cross verified for any errors and could not find any errors in given time.
also MDT Screen shot for your reference
I am struggling to figure out the reasons and this is causing stock mismatch between Oracle system and SAP and has become show stopper.
Please guide me in identifying the root cause and fixing this...
Thanking you all in anticipation of help...
Lakshmi

hi Claudia,
I have cross verified both and as you can see there are no errors
a
and finally the XML
couldn't figure out why this delay happening... One thing after an hour or so... the things get cleared as one in executing state finishes leading to others to finish.. but by then they are getting accumulated
Appreciate any guidance to figure out the root cause...
Thanks in advance
lakshmi

Restart a process or message in SXMB_MONI with status "Cancelled Manually"

SDN Crew,
This is query regarding the BPM process.
I have cancelled a process in MONI manually, Now i want to restart the process...
If i try to restart the process, it throws an error "only messages with error could be restarted and messages already processed or cancelled could not be resatarted".
How to solve the issue?
and also i want to restart the process because though i set the Poll interval in the Send Comm Channel as 60 sec, it processed only one message and that to in error(which i cancelled manually) no furthur processing is done i mean if u check for processed messages only one message is shown but it has to show similar error messages for every 60 sec?
i am new to BPM so could someone tell lme if i am doin gsomewhere wrong?

hi,
its posible,
take a look of this blog
/people/michal.krawczyk2/blog/2005/11/09/xi-restarting-successfully-processed-messages
Thanks
Rodrigo
ps:reward points if useful

How to cancel messages in SXMB_MONI with status "No receive found"

Dear All,
I need to cancel message with error status as mentioned in captioned subject.
Can you please guide me how to do it?
Regards,
Saras Jain

One more thing to check.....confirm if there is any background job scheduled to cnacel the message once it goes into error....if it is cancelled in this manner...if so you wont be allowed to cancel the (already cancelled) message manually
Regards,
Abhishek.

Message stuck in adapter engine with status Hold, how to delete those

Hi,
In Dev system around 6 lac messages are stuck in ;holding' state. How can I delete them. Is there is any standard proge which can delete all these messages.
Can I delete messages of IE with status 'recorded'?
Regards,
Krishna

Hi,
see this wiki
RSXMB_ARCHIVE_MESSAGES Archive XML Messages
RSXMB_CANCEL_NOT_REST_MESSAGES Cancel XI Messages With Errors That Cannot Be Restarted
RSXMB_DELETE_ARCHIVED_MESSAGES Delete Archived XML Messages
RSXMB_DELETE_MESSAGES Delete XML Messages from the Persistency Layer marked for DEL
RSXMB_CANCEL_MESSAGES Mass cancellation of error messages - XI
RSXMB_SHOW_REORG_STATUS & RSXMB_SHOW_STATUS provide an overview for all XML messages in XI persistency layer.
RSXMB_MESSAGE_STATISTICS2 which provides the processing statistics. This report basically analyzed the history table.
RXWF_XI_UNSED_MSGS report helps in converting messages states other than 003 to final state i.e. 003.
SXMS_REFRESH_ADAPTER_STATUS report helps in converting message sates like 001/008 into final state.
http://wiki.sdn.sap.com/wiki/display/XI/PIArchivingConceptual+Overview

Purging EOIO messages with status "Holding" at the adapter level in XI.

Hi,
I want to purge a set of messages (some 800) with status "Holding" at Adapter level in RunTime Workbench. I have gone through the blog "/people/stefan.grube/blog/2006/04/27/how-to-deal-with-stuck-eoio-messages-in-the-xi-30-adapter-framework which explain the way to reprocess the messages which are stuck in EOIO so that the rest in queue are processed but is there a way to purge a large number of messages in a EOIO queue which are holding for long, at the adpater framework level thorugh some option in Runtime workbench or Visual Administrator of J2EE server on which XI is running ?

Hi Gourav,
What do you mean by delete files from folder.
I have this problem and I can't get rid of the messages that are stuck in the adapter engine.
If I need step 3. how is that done?
Thanks.

Unable to send Asynchronus message to BPM from ABAP Object in ECC 700

Friends,I am trying to send a aysnchronus to BPM from ECC. I have done the following:
Implemented Note 1043195
Scheduled the SAP_SOAP_RUNTIME_MANAGEMENT Jobs
Created consumer proxy/logical port
Tried to send message to BOM using proxy classes.
Issue 1 :
I can see the messages in SXMB_MONI with status "Released for Processing(WS)" But the status never changes.
Issue 2 :
I can See Failed messages in SOAMANAGER with Error as below.
"A SOAP Runtime Core Exception occurred in method WSRM_CONV_FROM_STR_FORM_TO_TS of class CL_SOAP_WSRM_CRE_SEQU_RESP_NEW at position id 1 with internal error id 1009 and error text SRT: Wrong usage of SOAP Runtime classes: ("WSRM: Input value ->P0Y0M3DT0H0M0.000Sis an incorrect value") (fault location is 1 )."
Can anyone help me how to solve the two issue's.

Hi,
Did you manage to solve this issue?
Best Regards,
Hristo

Program exited with status value:101

Hi,
Please somebody help me.
I'm developing an application, in which I implemented maps, UIImagePicker, and used Sqlite3 for database.
My application gets terminated when I run it on iphone(no problem on simulator) with the following message:
Program exited with status value:101.
This happens randomly mostly after opening map 8-9 times or after accessing database for about 40-50 times.
I observed the memory allocation and leaks, there is no leak and when application terminate the net memory allocation is between 2.5Mb - 6Mb.

Use the activity monitor instrument (or memory monitor) on the device to find out the real sizes and the amount of memory available.
101 is usually memory problem.

BPM with waiting status in MONI

hi forum ...
in a fille to file scenario...with BPM.....
there are two receivers and 1 send step....
its like receiver1-->receiver2----->send1
when the scenario runs.......it receives a particular message for "receive2".....which i cant provide right now.......so the sxmb_moni shows a waiting status .....means a clock like signal......
how can i stop the BPM instance in waiting loop
is there any time out after which the BPM instance ll stop automatically

<<you have configured a terminating event>>
but i cant provide that condition due to some reasons......
<<SWIA to complete the workflow manually>>
how to do that...can u elaborate

How to cancel processed messages with acknowledgement waiting status

Hi All,
Messages processed successfully in Integration Server but messages still waiting for acknowledgement. I want to cancel these messages.Will u please let me know how to do delete these messages.I already canceled messages with status to be delivered in Integration Engine and Adapter Engine. But in SXMB_MONI, messages are processed successfully with waiting status.Please suggest how we need to cancel them.
Please Suggest some possible solution.
Regards,
Kanisha Sharma
Edited by: kanisha on Jul 2, 2010 8:28 AM

Hi,
Thanks for your reply.Yes it is an IDOC based scenario. But Idoc is in outbound side. Idoc processed successfully in ERP as well as PI processed successfully to MDM.Messages processed successfully in SXMB_MONI but once imported in MDM IS, then acknowledgement will be send to PI.My issue is:- MDM server is down and i want to cancel these messages.
Please suggest
Regards,
Kanisha Sharma

Kanban with status sequence WAIT EMPTY FULL shows '-' neg. sign after GR

Hi PP
I am using one control cycle in kanban with replenishment strategy
stock transfer where in stock transfer using "stock transfer with
reservation".
I made one bin empty at the demand source using t code PK13N
But when i am doing transfer posting using migo against the
replenishment element created by emptying the kanban , i am getting
messge "NO KANBAN EXIST".
why system is behaving abnormal i mean trnasfer posting not happening.
system is not behaving normal.If i forcibly do the posting ignoring
warining message above mentioned it shows no change in bin status ,
then if i manually change status to green by PK13n it makes it green
but wth negative sign.This behavior is quite abnormal as i have
sufficient stock to get transfered too.
status sequence is with three statuses WAIT EMPTY FULL
Please help in this regard
Even if i use this status sequence for inhouse production also same problem is their

Hi,
Check the settings for replenishment strategy u have selected for the material.
OM11 - Production Relenishment strategy
OM12 - Procurement Replenishment strategy
as in ur case u are now procuring that element so, check order type in ur replenishment strategy
Regards
Samunder Singh

Messages in BPM with Status Waiting

Similar Messages

Maybe you are looking for