Messaging server vs Directory Server
Hi everybody,
My system have 2 server, 1 is Iplanet messaging server 5.2 P2 and the other is Directory Server 5.2. Recent days, i could not check email and when checked for error i got this :
On directory server, run command netstat -an
10.12.0.6.10389 210.245.31.25.45571 49640 0 49640 0 ESTABLISHED
10.12.0.6.10389 210.245.31.25.52754 49640 0 49640 0 ESTABLISHED
10.12.0.6.10389 210.245.31.25.39489 48475 0 49640 0 ESTABLISHED
10.12.0.6.10389 210.245.31.25.40364 49640 0 49640 0 ESTABLISHED
10.12.0.6.10389 210.245.31.25.35518 49640 0 49640 0 ESTABLISHED
10.12.0.6.10389 210.245.31.25.62958 49640 0 49640 0 ESTABLISHED
10.12.0.6.10389 210.245.31.25.39052 48475 0 49640 0 ESTABLISHED
10.12.0.6.10389 210.245.31.25.39936 49640 0 49640 0 ESTABLISHED
10.12.0.6.10389 210.245.31.25.39947 48475 0 49640 0 ESTABLISHED
10.12.0.6.10389 210.245.31.25.48198 49640 0 49640 0 ESTABLISHED
10.12.0.6.10389 210.245.31.25.40819 48475 0 49640 0 ESTABLISHED
10.12.0.6.10389 210.245.31.25.42586 48475 0 49640 0 ESTABLISHED
10.12.0.6.10389 210.245.31.25.42592 49640 0 49640 0 ESTABLISHED
10.12.0.6.10389 210.245.31.25.44336 48475 0 49640 0 ESTABLISHED
Over 4000 sessions still in state ESTABLISHED (about 100 people use this mail server but not usually). So, i check the logs file (LDAP log file), i saw :
[01/Sep/2008:07:46:08 +0700] - DEBUG - conn=-1 op=-1 msgId=-1 - Listening for new connections again
[01/Sep/2008:07:46:08 +0700] - ERROR<12293> - Connection - conn=-1 op=-1 msgId=-1 - fd limit exceeded Too many open file descriptor
s - not listening on new connection
[01/Sep/2008:07:46:08 +0700] - DEBUG - conn=-1 op=-1 msgId=-1 - Listening for new connections again
[01/Sep/2008:07:46:08 +0700] - ERROR<12293> - Connection - conn=-1 op=-1 msgId=-1 - fd limit exceeded Too many open file descriptor
s - not listening on new connection
Did i reach to limitation of max-connection which this server allows ? Any ideas ?
Thanks
all4ims wrote:
My system have 2 server, 1 is Iplanet messaging server 5.2 P2 and the other is Directory Server 5.2. Recent days, i could not check email and when checked for error i got this :
On directory server, run command netstat -an
10.12.0.6.10389 210.245.31.25.45571 49640 0 49640 0 ESTABLISHEDWhat application is running on 210.245.31.25 that would require so many established connections to the directory server?
Over 4000 sessions still in state ESTABLISHED (about 100 people use this mail server but not usually). So, i check the logs file (LDAP log file), i saw :
[01/Sep/2008:07:46:08 +0700] - DEBUG - conn=-1 op=-1 msgId=-1 - Listening for new connections again
[01/Sep/2008:07:46:08 +0700] - ERROR<12293> - Connection - conn=-1 op=-1 msgId=-1 - fd limit exceeded Too many open file descriptor
s - not listening on new connection
[01/Sep/2008:07:46:08 +0700] - DEBUG - conn=-1 op=-1 msgId=-1 - Listening for new connections again
[01/Sep/2008:07:46:08 +0700] - ERROR<12293> - Connection - conn=-1 op=-1 msgId=-1 - fd limit exceeded Too many open file descriptor
s - not listening on new connection
Did i reach to limitation of max-connection which this server allows ? Any ideas ?You hit the maximum file-descriptor limit as the error points out. Remember that each TCP network connection consumes a file-descriptor.
At this point you have a few options:
1) Try to determine why there are so many active connections from the system 210.245.31.25 to the LDAP server and reduce them (e.g. restart the application holding open the connections, fix the application).
2) Increase the maximum number of file-descriptors for the system to allow for additional connections -- although this may just delay the problem from re-occurring if you don't address (1).
3) Restart the Directory Server to close the established connections. This is a short-term fix only.
Regards,
Shane.
Similar Messages
-
Changin installation directory of messaging server
Hello,
I have installed and configured messaging server at /opt/sun/comms/messaging64/.....
I wanted to change that to /messaging/mail1/bin directory
I stopped the messaging server
I copied all the content of messaging64/ to messaging/mail1/bin
moved messaging64 folder. I am able to do start stop for messaging. however imsrestart is giving error ....
starting dispatched serverf ld.so.1: dispatched : fatal: libimta.so: open failed: no such file or directory.
Exit code =2 (2) - IMTA_NO, basic No,......
i checked file libimta.so is there under messaging/mail1/bin/lib
I also added above path in to LD_LIBRARY_PATH and also to the path.
still getting the same error.
also checked with sh -x imsimta version
it is showing correct directories.
what other action need to be taken here?
regards,
sumantmr.chhunchha wrote:
I have installed and configured messaging server at /opt/sun/comms/messaging64/.....
I wanted to change that to /messaging/mail1/bin directoryJust for future reference you can specify the install-root by using the --installroot <path> commpkg option as per:
http://wikis.sun.com/display/CommSuite/commpkg+install+Usage
starting dispatched serverf ld.so.1: dispatched : fatal: libimta.so: open failed: no such file or directory.
what other action need to be taken here?You need to make sure that the crle values are correctly set to match the new path (run the crle command and you will see the paths I am referring to).
Regards,
Shane. -
Does Sun Messaging Server support Microsoft Active Directory
Hello,
I just got this qustion. Does Sun Messaging Server work with Microsoft Active Directory?
Thanks.Please post in the messaging server forum: [http://forums.sun.com/forum.jspa?forumID=708|http://forums.sun.com/forum.jspa?forumID=708]
-
Messaging Server authenticate against directory server
Just wonder how to make messaging server authenticate against directory server? Basically I created users on the directroy server, and would like to let these users to access messaging server?
Thanks for advice!I'm sorry, your question doesn't really make any sense.
Messaging Server always authenticates to users in a Directory.
How did you "create users"? That may be the problem. If you don't create the users with the provisioning tools provided with Messaging, then the users don't have the correct object classes and attributes to function as Messaging users. -
Directory Server Replica and Messaging Server 6
I install Directory Server 5.2 as Master Replica in one machine (V120) and on the other machine (V240) I install the following:
1. SunONE Directory Server 5.2 (Consumer
Replica) or slave replica.
2. SunONE Identity Server
3. SunONE Messaging Server 6
I have successfully install and configured the 3 Servers, when they are running on just one machine (one box). But when I try to run them in two separate machines as described above, the messaging server acts strangely and it's configuration fails, when i try to configure it on the directory server replica.
In simpler words, I want to know if someone has installed Messaging Server in a Directory Server Replication scenario, where there are two machines involve. Because all works well when we install everything on one machine (one box) but I am having hard time configuring the messaging server in this split setup scenario.
So, if someone has idea about how to run the Messaging Server 6 ( ./configure ) file successfully on a Directory Server 5.2 Replica, please suggest me in detail.
Thanking you,
Farhan Ahmed.
Vision Valley, Dubai.Messaging Server uses LDAP in two ways. The obvious one is that user/group/domain information is stored there.
The non-obvious way is that some configuration information is stored in LDAP, in the "o=NetscapeRoot" tree. This tree is NOT ususally replicated, so if you perform the installation against one LDAP server, and then attempt to move the configuration to point to another one, and don't make a separate replication agreement for the configuration, your server won't work correctly.
To configure Messaging against a replica, you also need to understand how the replication and "referral" works. Without studying your scenario, I cannot tell what has failed, but indeed, there are users that have configured Messaging 6.0 against a replica LDAP system.
You may want to open a tech support ticket, and get personal help for your issue. -
Messaging server "testing" config directory instance
So I'm noticing a lot of binds and searches from Messaging to it's config DS instance and was just curious as to if there's a pattern? My production box seems to test anywhere from every minute to as long as 4 minutes apart, however a test box (at the same patch level as prod) it only tests every 10 minutes (or right along with msprobe). The prod box has the same configutil for msprobe so I can't figure out why the prod messaging is continuously doing this:
[06/Feb/2007:09:44:59 -0500] conn=1504753 op=0 msgId=1 - BIND dn="cn=msg-config, cn=Sun ONE Messaging Suite, cn=Server Group, cn=mail.domain.edu, ou=domain.edu, o=NetscapeRoot" method=128 version=2
[06/Feb/2007:09:44:59 -0500] conn=1504753 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn="cn=msg-config,cn=sun one messaging suite,cn=server group,cn=mail.domain.edu,ou=domain.edu,o=netscaperoot"
[06/Feb/2007:09:44:59 -0500] conn=1504753 op=1 msgId=2 - SRCH base="cn=configuration,cn=msg-config,cn=sun one messaging suite,cn=server group,cn=mail.domain.edu,ou=domain.edu,o=netscaperoot" scope=2 filter="(objectClass=*)" attrs=ALL
[06/Feb/2007:09:44:59 -0500] conn=1504753 op=1 msgId=2 - RESULT err=0 tag=101 nentries=39 etime=0
[06/Feb/2007:09:44:59 -0500] conn=1504753 op=2 msgId=3 - UNBIND
[06/Feb/2007:09:44:59 -0500] conn=1504753 op=2 msgId=-1 - closing - U1
[06/Feb/2007:09:44:59 -0500] conn=1504753 op=-1 msgId=-1 - closed.
Sure there's a LOT more traffic to production than test, but I wasn't aware that it was traffic dependent. This is also a backend store - the two front ends we have which are config'd for MMP/MEM do not look for the config ds other than at startu/shutdown.
Version:
Sun Java(tm) System Messaging Server 6.2-7.05 (built Sep 5 2006)
libimta.so 6.2-7.05 (built 12:18:44, Sep 5 2006)
Is this typical? Is this configurable to stop it from checking so frequently/sporadically? Is this something I need to worry about?Hi,
will get stopped and restarted. When they get
restarted, they will query the config ldap. Has
nothing to do with msprobe, but does have to do with
the load on the system. the tcp server/clients live
for a number of hours, or number of connections. . .
This all changes with 6.3.In case you were wondering, version 6.3 of messaging server does away with the configuration directory, and stores the same settings locally. That is why Jay says it changes with 6.3.
Regards,
Shane. -
Netsconsole 4.2- no admin server, directory server, messaging server
I have installed Iplanet messaging server 5.1 in sun solaris 8. After starting netscape console 4.2 I can't see admin server, directory server, messaging server tabs under the tree at the lefthand side. only domainname there. But all servers are working fine as far as i inspected. Have anybody come across this and help me to solve the problem and use this console effectively.
-suranji4.2 is never meant to work with msg 5.2? Well what about Netscape Console 4.5? Is it meant to work? What console is actually meant to work with Msg 5.2?
The answers that SUN gives are always unclear. Instead of blabbering that this wont work, that wont work, why dont you guys say what actually WORKS?
You know what? Nothing works that is from SUN. We have to break our heads and be sorry that we chose the SUN side.
Give a clear documentation. Put up a compatibility list with each product. Why dont you guys concentrate on documentation?
If I invent something, i have to tell people how to use it. Otherwise, slowly people will start to get away from it. Take this message. Work on guys. Do you know how frustrating it is that somwething logcal turns out NOT WORKING. and all we get for answer is THIS IS NOT SUPPORTEd and nothing else?
Please....for all those guys running Msg server, switch to exchange..live happily... i am planning to recommend this to my customer....live peacefully..live with MS -
How do I set the mailhost attribute in Messaging Server 3.5?
<B>Intent of the hostname aliases feature: </B><BR>
In Messaging Server 3.5, the hostname aliases feature is designed to facilitate migrating and co-hosting. For
instance, if you set up all of your sales and marketing users on one Messaging Server, but suspect that you'll
want to split those groups in the future, you can give the sales users the mailhost value sales.company.com and
the marketing users the mailhost value mktg.company.com. This feature can also be used for fast failover if
you want to be able to move a group of users quickly from one Messaging Server to another.
<P>
<B>How to use hostname aliases and how to set mailhost and MessageHostName settings: </B><BR>
Each user's mailhost attribute can have only one value. All users on a single Messaging Server do not need to
have the same mailhost value in the LDAP directory. The user's mailhost value should match one of the
MessageHostName attribute values in netscape.mail.conf. (On Unix, the path to this file is
/etc/netscape.mail.conf. Windows NT users must use Notepad to create this file in
server-root\bin\mail\Server\etc, where server-root is the base directory where your SuiteSpot servers are
installed.)
<P>
With Messaging Server 3.5 and later, MessageHostName can have multiple values. Think of hostnames as
colors. Each mail account in the LDAP server has a single color. Each Messaging Server has one or more
colors. A Messaging Server will check an LDAP account's color (mailhost) against its own color(s)
(MessageHostName), and if they match, the server considers the account to be local. <P>
For example: <BR>
MessageHostName=red.company.com,green.company.com,blue.company.com
<BR>where original-host-name is the machine's real name. This entry must come first as the server uses the first
entry to generate machine specific postmaster forms. The subsequent host names can be any values that you
wish separated by commas that are inside the brackets. Do not place spaces anywhere on the line.
<P>
In this example, if the mailhost setting for the user is set for either red.company.com or green.company.com, or
blue.company.com, the server will consider the user to be local. (Hostname aliases must also be configured in
DNS. Please see the DNS section at the end of this technote.) No other Messaging Server should list either
red.company.com or green.company.com or blue.company.com in the MessageHostName field. Mail could
not be delivered properly if either red.company.com or green.company.com or blue.company.com were listed
in any other server's MessageHostName field. A user with a mailhost setting of violet.company.com would not
be considered local to this machine.
<P>
Although it is possible with Messaging Server 3.52 to list more than 16 different host names in the
MessageHostName field, it is not recommended because increasing the number of hostnames in this field beyond
16 will have a negative impact on performance. This feature is intended to provide fast failover and/or
migration of users. If users need to be divided up into many smaller groups, the use of some other LDAP
attribute is recommended.
<P>
In Messaging Server 3.0, you can associate a server with only one host name. Consequently, all mail accounts
on a given server must have the same mailhost value in the LDAP directory. This should be the name of the
server, i.e. host.company.com
<P>
</A>A note about DNS
Hostname aliases must be configured in DNS. This is done with a CNAME record. For example:
A 128.101.101.101
CNAME
<P>
Additional MX records are not required to use hostname aliases.
<P>
If you aren't sure about how to configure your DNS records, consult the book <I>DNS and Bind </I> by Paul Albitz and
Cricket Liu.You can find the connection settings in Tools > Options > Advanced : Network : Connection
See "Firefox connection settings":
*[[Firefox cannot load websites but other programs can]] -
Unable to open Messaging Server 6.2 through admin console 5.2
my system is
Sun Java(tm) System Messaging Server 6.2-3.05 (built Nov 23 2005)
libimta.dll 6.2-3.05 (built 02:22:19, Nov 23 2005)
Microsoft Windows 2000 version 5.2 (Build 3790)
i installed Sun Java Enterprise System (directory, admin, messaging) servers on my windows 2003 server, all is working fine except:
1- unable to open my messaging server through my admin console 5.2.
when checking the error log file i see
"[05/Jun/2006:10:51:49] failure ( 2624): for host t.est.hotmail.com trying to GET /msg-config/tasks/operation/cgi_root, cgi_scan_headers reports: the CGI program E:\Sun\Server-Root\bin\msg\admin\bin\cgi_root.exe did not produce a valid header (program terminated without a valid CGI header. Check for core dump or other abnormal termination)"
Any clue?
2- When creating a new user through the admin console 5.2, and check the mail account checkbox, i don't get the "mail tab" to complete the needed information, and therefore the newly created user is not an active email account as mainly the mailhost attribute has not been created for the account
Is this related to the problem in point 1?
NOTE 1: i ran cmm_dssetup.pl before configuring the messaging server and selected schema 1
NOTE 2: i downloaded the software from sun.com, didn't register it yet as i'm in the testing phase
Appreciate your help, direction and tipsOh, my.....
1. The Directory Console is not very useful, for anything in Messaging 6. The MTA is configured via editing files, and the mail store is better configured using the configutil utility.
2. You SHOULD NOT attempt to create users with the Directory Console. They won't work. Use either the command-line tools provided (comm-admin), or use the Delegated Admin tool provided. -
After Installing SAP netweaver abap 7.01 (Message server unreachable)
Hi every one ,
it was a very long night and still continues
It's my first time to install SAP netweaver abap 7.01 .. I'm using Operating System : Vista service Pack 1 .. i installed the NetWeaver Abap 7.01 and when the install shield finished he asked me to run the server ..when i clicked " ok " the install shield couldn't run the server and told me to see the log file .. and here is the log file :
<
(Dec 23, 2008 7:54:39 PM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
(Dec 23, 2008 7:54:39 PM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
(Dec 23, 2008 7:54:49 PM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
(Dec 23, 2008 7:54:49 PM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
(Dec 23, 2008 7:54:59 PM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
(Dec 23, 2008 7:54:59 PM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
(Dec 23, 2008 7:55:09 PM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
(Dec 23, 2008 7:55:09 PM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
(Dec 23, 2008 7:55:19 PM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
(Dec 23, 2008 7:55:19 PM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
(Dec 23, 2008 7:55:29 PM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
(Dec 23, 2008 7:55:29 PM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
(Dec 23, 2008 7:55:40 PM), Install, com.sap.installshield.CheckServicesAction, err, An error occurred and product installation failed. Look at the log file F:\SAP\NSP\log.txt for details.
(Dec 23, 2008 7:55:40 PM), Install, com.sap.installshield.CheckServicesAction, err, ProductException: (error code = 601; message="Services failed to start (see the log for details)")
STACK_TRACE: 12
ProductException: (error code = 601; message="Services failed to start (see the log for details)")
at com.sap.installshield.CheckServicesAction.install(CheckServicesAction.java:95)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
(Dec 23, 2008 7:55:41 PM), Install, com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct, err, An error occurred and product uninstallation failed. Look at the log file F:\SAP\NSP\log.txt for details.
(Dec 23, 2008 7:55:41 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllUninstallationSteps(StepWrapperInstallFiles.java:192)
at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.uninstall(StepWrapperInstallFiles.java:313)
at com.installshield.product.service.product.PureJavaProductServiceImpl.uninstallProductAction(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.processActionsFailed(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
>
And here is my Services file :
<
Copyright (c) 1993-2004 Microsoft Corp.
This file contains port numbers for well-known services defined by IANA
Format:
<service name> <port number>/<protocol> [aliases...] [#<comment>]
echo 7/tcp
echo 7/udp
discard 9/tcp sink null
discard 9/udp sink null
systat 11/tcp users #Active users
systat 11/udp users #Active users
daytime 13/tcp
daytime 13/udp
qotd 17/tcp quote #Quote of the day
qotd 17/udp quote #Quote of the day
chargen 19/tcp ttytst source #Character generator
chargen 19/udp ttytst source #Character generator
ftp-data 20/tcp #FTP, data
ftp 21/tcp #FTP. control
ssh 22/tcp #SSH Remote Login Protocol
telnet 23/tcp
smtp 25/tcp mail #Simple Mail Transfer Protocol
time 37/tcp timserver
time 37/udp timserver
rlp 39/udp resource #Resource Location Protocol
nameserver 42/tcp name #Host Name Server
nameserver 42/udp name #Host Name Server
nicname 43/tcp whois
domain 53/tcp #Domain Name Server
domain 53/udp #Domain Name Server
bootps 67/udp dhcps #Bootstrap Protocol Server
bootpc 68/udp dhcpc #Bootstrap Protocol Client
tftp 69/udp #Trivial File Transfer
gopher 70/tcp
finger 79/tcp
http 80/tcp www www-http #World Wide Web
hosts2-ns 81/tcp #HOSTS2 Name Server
hosts2-ns 81/udp #HOSTS2 Name Server
kerberos 88/tcp krb5 kerberos-sec #Kerberos
kerberos 88/udp krb5 kerberos-sec #Kerberos
hostname 101/tcp hostnames #NIC Host Name Server
iso-tsap 102/tcp #ISO-TSAP Class 0
rtelnet 107/tcp #Remote Telnet Service
pop2 109/tcp postoffice #Post Office Protocol - Version 2
pop3 110/tcp #Post Office Protocol - Version 3
sunrpc 111/tcp rpcbind portmap #SUN Remote Procedure Call
sunrpc 111/udp rpcbind portmap #SUN Remote Procedure Call
auth 113/tcp ident tap #Identification Protocol
uucp-path 117/tcp
sqlserv 118/tcp #SQL Services
nntp 119/tcp usenet #Network News Transfer Protocol
ntp 123/udp #Network Time Protocol
epmap 135/tcp loc-srv #DCE endpoint resolution
epmap 135/udp loc-srv #DCE endpoint resolution
netbios-ns 137/tcp nbname #NETBIOS Name Service
netbios-ns 137/udp nbname #NETBIOS Name Service
netbios-dgm 138/udp nbdatagram #NETBIOS Datagram Service
netbios-ssn 139/tcp nbsession #NETBIOS Session Service
imap 143/tcp imap4 #Internet Message Access Protocol
sql-net 150/tcp
sqlsrv 156/tcp
pcmail-srv 158/tcp #PCMail Server
snmp 161/udp #SNMP
snmptrap 162/udp snmp-trap #SNMP trap
print-srv 170/tcp #Network PostScript
bgp 179/tcp #Border Gateway Protocol
irc 194/tcp #Internet Relay Chat Protocol
ipx 213/udp #IPX over IP
rtsps 322/tcp
rtsps 322/udp
mftp 349/tcp
mftp 349/udp
ldap 389/tcp #Lightweight Directory Access Protocol
https 443/tcp MCom #HTTP over TLS/SSL
https 443/udp MCom #HTTP over TLS/SSL
microsoft-ds 445/tcp
microsoft-ds 445/udp
kpasswd 464/tcp # Kerberos (v5)
kpasswd 464/udp # Kerberos (v5)
isakmp 500/udp ike #Internet Key Exchange
crs 507/tcp #Content Replication System
crs 507/udp #Content Replication System
exec 512/tcp #Remote Process Execution
biff 512/udp comsat
login 513/tcp #Remote Login
who 513/udp whod
cmd 514/tcp shell
syslog 514/udp
printer 515/tcp spooler
talk 517/udp
ntalk 518/udp
efs 520/tcp #Extended File Name Server
router 520/udp route routed
ulp 522/tcp
ulp 522/udp
timed 525/udp timeserver
tempo 526/tcp newdate
irc-serv 529/tcp
irc-serv 529/udp
courier 530/tcp rpc
conference 531/tcp chat
netnews 532/tcp readnews
netwall 533/udp #For emergency broadcasts
uucp 540/tcp uucpd
klogin 543/tcp #Kerberos login
kshell 544/tcp krcmd #Kerberos remote shell
dhcpv6-client 546/tcp #DHCPv6 Client
dhcpv6-client 546/udp #DHCPv6 Client
dhcpv6-server 547/tcp #DHCPv6 Server
dhcpv6-server 547/udp #DHCPv6 Server
afpovertcp 548/tcp #AFP over TCP
afpovertcp 548/udp #AFP over TCP
new-rwho 550/udp new-who
rtsp 554/tcp #Real Time Stream Control Protocol
rtsp 554/udp #Real Time Stream Control Protocol
remotefs 556/tcp rfs rfs_server
rmonitor 560/udp rmonitord
monitor 561/udp
nntps 563/tcp snntp #NNTP over TLS/SSL
nntps 563/udp snntp #NNTP over TLS/SSL
whoami 565/tcp
whoami 565/udp
ms-shuttle 568/tcp #Microsoft shuttle
ms-shuttle 568/udp #Microsoft shuttle
ms-rome 569/tcp #Microsoft rome
ms-rome 569/udp #Microsoft rome
http-rpc-epmap 593/tcp #HTTP RPC Ep Map
http-rpc-epmap 593/udp #HTTP RPC Ep Map
hmmp-ind 612/tcp #HMMP Indication
hmmp-ind 612/udp #HMMP Indication
hmmp-op 613/tcp #HMMP Operation
hmmp-op 613/udp #HMMP Operation
ldaps 636/tcp sldap #LDAP over TLS/SSL
doom 666/tcp #Doom Id Software
doom 666/udp #Doom Id Software
msexch-routing 691/tcp #MS Exchange Routing
msexch-routing 691/udp #MS Exchange Routing
kerberos-adm 749/tcp #Kerberos administration
kerberos-adm 749/udp #Kerberos administration
kerberos-iv 750/udp #Kerberos version IV
mdbs_daemon 800/tcp
mdbs_daemon 800/udp
ftps-data 989/tcp #FTP data, over TLS/SSL
ftps 990/tcp #FTP control, over TLS/SSL
telnets 992/tcp #Telnet protocol over TLS/SSL
imaps 993/tcp #IMAP4 protocol over TLS/SSL
ircs 994/tcp #IRC protocol over TLS/SSL
pop3s 995/tcp spop3 #pop3 protocol over TLS/SSL (was spop3)
pop3s 995/udp spop3 #pop3 protocol over TLS/SSL (was spop3)
kpop 1109/tcp #Kerberos POP
nfsd-status 1110/tcp #Cluster status info
nfsd-keepalive 1110/udp #Client status info
nfa 1155/tcp #Network File Access
nfa 1155/udp #Network File Access
activesync 1034/tcp #ActiveSync Notifications
phone 1167/udp #Conference calling
opsmgr 1270/tcp #Microsoft Operations Manager
opsmgr 1270/udp #Microsoft Operations Manager
ms-sql-s 1433/tcp #Microsoft-SQL-Server
ms-sql-s 1433/udp #Microsoft-SQL-Server
ms-sql-m 1434/tcp #Microsoft-SQL-Monitor
ms-sql-m 1434/udp #Microsoft-SQL-Monitor
ms-sna-server 1477/tcp
ms-sna-server 1477/udp
ms-sna-base 1478/tcp
ms-sna-base 1478/udp
wins 1512/tcp #Microsoft Windows Internet Name Service
wins 1512/udp #Microsoft Windows Internet Name Service
ingreslock 1524/tcp ingres
stt 1607/tcp
stt 1607/udp
l2tp 1701/udp #Layer Two Tunneling Protocol
pptconference 1711/tcp
pptconference 1711/udp
pptp 1723/tcp #Point-to-point tunnelling protocol
msiccp 1731/tcp
msiccp 1731/udp
remote-winsock 1745/tcp
remote-winsock 1745/udp
ms-streaming 1755/tcp
ms-streaming 1755/udp
msmq 1801/tcp #Microsoft Message Queue
msmq 1801/udp #Microsoft Message Queue
radius 1812/udp #RADIUS authentication protocol
radacct 1813/udp #RADIUS accounting protocol
msnp 1863/tcp
msnp 1863/udp
ssdp 1900/tcp
ssdp 1900/udp
close-combat 1944/tcp
close-combat 1944/udp
nfsd 2049/udp nfs #NFS server
knetd 2053/tcp #Kerberos de-multiplexor
mzap 2106/tcp #Multicast-Scope Zone Announcement Protocol
mzap 2106/udp #Multicast-Scope Zone Announcement Protocol
qwave 2177/tcp #QWAVE
qwave 2177/udp #QWAVE Experiment Port
directplay 2234/tcp #DirectPlay
directplay 2234/udp #DirectPlay
ms-olap3 2382/tcp #Microsoft OLAP 3
ms-olap3 2382/udp #Microsoft OLAP 3
ms-olap4 2383/tcp #Microsoft OLAP 4
ms-olap4 2383/udp #Microsoft OLAP 4
ms-olap1 2393/tcp #Microsoft OLAP 1
ms-olap1 2393/udp #Microsoft OLAP 1
ms-olap2 2394/tcp #Microsoft OLAP 2
ms-olap2 2394/udp #Microsoft OLAP 2
ms-theater 2460/tcp
ms-theater 2460/udp
wlbs 2504/tcp #Microsoft Windows Load Balancing Server
wlbs 2504/udp #Microsoft Windows Load Balancing Server
ms-v-worlds 2525/tcp #Microsoft V-Worlds
ms-v-worlds 2525/udp #Microsoft V-Worlds
sms-rcinfo 2701/tcp #SMS RCINFO
sms-rcinfo 2701/udp #SMS RCINFO
sms-xfer 2702/tcp #SMS XFER
sms-xfer 2702/udp #SMS XFER
sms-chat 2703/tcp #SMS CHAT
sms-chat 2703/udp #SMS CHAT
sms-remctrl 2704/tcp #SMS REMCTRL
sms-remctrl 2704/udp #SMS REMCTRL
msolap-ptp2 2725/tcp #MSOLAP PTP2
msolap-ptp2 2725/udp #MSOLAP PTP2
icslap 2869/tcp
icslap 2869/udp
cifs 3020/tcp
cifs 3020/udp
xbox 3074/tcp #Microsoft Xbox game port
xbox 3074/udp #Microsoft Xbox game port
ms-dotnetster 3126/tcp #Microsoft .NET ster port
ms-dotnetster 3126/udp #Microsoft .NET ster port
ms-rule-engine 3132/tcp #Microsoft Business Rule Engine Update Service
ms-rule-engine 3132/udp #Microsoft Business Rule Engine Update Service
msft-gc 3268/tcp #Microsoft Global Catalog
msft-gc 3268/udp #Microsoft Global Catalog
msft-gc-ssl 3269/tcp #Microsoft Global Catalog with LDAP/SSL
msft-gc-ssl 3269/udp #Microsoft Global Catalog with LDAP/SSL
ms-cluster-net 3343/tcp #Microsoft Cluster Net
ms-cluster-net 3343/udp #Microsoft Cluster Net
ms-wbt-server 3389/tcp #MS WBT Server
ms-wbt-server 3389/udp #MS WBT Server
ms-la 3535/tcp #Microsoft Class Server
ms-la 3535/udp #Microsoft Class Server
pnrp-port 3540/tcp #PNRP User Port
pnrp-port 3540/udp #PNRP User Port
teredo 3544/tcp #Teredo Port
teredo 3544/udp #Teredo Port
p2pgroup 3587/tcp #Peer to Peer Grouping
p2pgroup 3587/udp #Peer to Peer Grouping
upnp-discovery 3702/tcp #UPNP v2 Discovery
dvcprov-port 3776/tcp #Device Provisioning Port
dvcprov-port 3776/udp #Device Provisioning Port
msfw-control 3847/tcp #Microsoft Firewall Control
msdts1 3882/tcp #DTS Service Port
sdp-portmapper 3935/tcp #SDP Port Mapper Protocol
sdp-portmapper 3935/udp #SDP Port Mapper Protocol
net-device 4350/tcp #Net Device
net-device 4350/udp #Net Device
ipsec-msft 4500/tcp #Microsoft IPsec NAT-T
ipsec-msft 4500/udp #Microsoft IPsec NAT-T
llmnr 5355/tcp #LLMNR
llmnr 5355/udp #LLMNR
rrac 5678/tcp #Remote Replication Agent Connection
rrac 5678/udp #Remote Replication Agent Connection
dccm 5679/tcp #Direct Cable Connect Manager
dccm 5679/udp #Direct Cable Connect Manager
ms-licensing 5720/tcp #Microsoft Licensing
ms-licensing 5720/udp #Microsoft Licensing
directplay8 6073/tcp #DirectPlay8
directplay8 6073/udp #DirectPlay8
man 9535/tcp #Remote Man Server
rasadv 9753/tcp
rasadv 9753/udp
imip-channels 11320/tcp #IMIP Channels Port
imip-channels 11320/udp #IMIP Channels Port
directplaysrvr 47624/tcp #Direct Play Server
directplaysrvr 47624/udp #Direct Play Server
sql6 7210/tcp
sapdbni72 7269/tcp
Copyright (c) 1993-2004 Microsoft Corp.
This file contains port numbers for well-known services defined by IANA
Format:
<service name> <port number>/<protocol> [aliases...] [#<comment>]
echo 7/tcp
echo 7/udp
discard 9/tcp sink null
discard 9/udp sink null
systat 11/tcp users #Active users
systat 11/udp users #Active users
daytime 13/tcp
daytime 13/udp
qotd 17/tcp quote #Quote of the day
qotd 17/udp quote #Quote of the day
chargen 19/tcp ttytst source #Character generator
chargen 19/udp ttytst source #Character generator
ftp-data 20/tcp #FTP, data
ftp 21/tcp #FTP. control
ssh 22/tcp #SSH Remote Login Protocol
telnet 23/tcp
smtp 25/tcp mail #Simple Mail Transfer Protocol
time 37/tcp timserver
time 37/udp timserver
rlp 39/udp resource #Resource Location Protocol
nameserver 42/tcp name #Host Name Server
nameserver 42/udp name #Host Name Server
nicname 43/tcp whois
domain 53/tcp #Domain Name Server
domain 53/udp #Domain Name Server
bootps 67/udp dhcps #Bootstrap Protocol Server
bootpc 68/udp dhcpc #Bootstrap Protocol Client
tftp 69/udp #Trivial File Transfer
gopher 70/tcp
finger 79/tcp
http 80/tcp www www-http #World Wide Web
hosts2-ns 81/tcp #HOSTS2 Name Server
hosts2-ns 81/udp #HOSTS2 Name Server
kerberos 88/tcp krb5 kerberos-sec #Kerberos
kerberos 88/udp krb5 kerberos-sec #Kerberos
hostname 101/tcp hostnames #NIC Host Name Server
iso-tsap 102/tcp #ISO-TSAP Class 0
rtelnet 107/tcp #Remote Telnet Service
pop2 109/tcp postoffice #Post Office Protocol - Version 2
pop3 110/tcp #Post Office Protocol - Version 3
sunrpc 111/tcp rpcbind portmap #SUN Remote Procedure Call
sunrpc 111/udp rpcbind portmap #SUN Remote Procedure Call
auth 113/tcp ident tap #Identification Protocol
uucp-path 117/tcp
sqlserv 118/tcp #SQL Services
nntp 119/tcp usenet #Network News Transfer Protocol
ntp 123/udp #Network Time Protocol
epmap 135/tcp loc-srv #DCE endpoint resolution
epmap 135/udp loc-srv #DCE endpoint resolution
netbios-ns 137/tcp nbname #NETBIOS Name Service
netbios-ns 137/udp nbname #NETBIOS Name Service
netbios-dgm 138/udp nbdatagram #NETBIOS Datagram Service
netbios-ssn 139/tcp nbsession #NETBIOS Session Service
imap 143/tcp imap4 #Internet Message Access Protocol
sql-net 150/tcp
sqlsrv 156/tcp
pcmail-srv 158/tcp #PCMail Server
snmp 161/udp #SNMP
snmptrap 162/udp snmp-trap #SNMP trap
print-srv 170/tcp #Network PostScript
bgp 179/tcp #Border Gateway Protocol
irc 194/tcp #Internet Relay Chat Protocol
ipx 213/udp #IPX over IP
rtsps 322/tcp
rtsps 322/udp
mftp 349/tcp
mftp 349/udp
ldap 389/tcp #Lightweight Directory Access Protocol
https 443/tcp MCom #HTTP over TLS/SSL
https 443/udp MCom #HTTP over TLS/SSL
microsoft-ds 445/tcp
microsoft-ds 445/udp
kpasswd 464/tcp # Kerberos (v5)
kpasswd 464/udp # Kerberos (v5)
isakmp 500/udp ike #Internet Key Exchange
crs 507/tcp #Content Replication System
crs 507/udp #Content Replication System
exec 512/tcp #Remote Process Execution
biff 512/udp comsat
login 513/tcp #Remote Login
who 513/udp whod
cmd 514/tcp shell
syslog 514/udp
printer 515/tcp spooler
talk 517/udp
ntalk 518/udp
efs 520/tcp #Extended File Name Server
router 520/udp route routed
ulp 522/tcp
ulp 522/udp
timed 525/udp timeserver
tempo 526/tcp newdate
irc-serv 529/tcp
irc-serv 529/udp
courier 530/tcp rpc
conference 531/tcp chat
netnews 532/tcp readnews
netwall 533/udp #For emergency broadcasts
uucp 540/tcp uucpd
klogin 543/tcp #Kerberos login
kshell 544/tcp krcmd #Kerberos remote shell
dhcpv6-client 546/tcp #DHCPv6 Client
dhcpv6-client 546/udp #DHCPv6 Client
dhcpv6-server 547/tcp #DHCPv6 Server
dhcpv6-server 547/udp #DHCPv6 Server
afpovertcp 548/tcp #AFP over TCP
afpovertcp 548/udp #AFP over TCP
new-rwho 550/udp new-who
rtsp 554/tcp #Real Time Stream Control Protocol
rtsp 554/udp #Real Time Stream Control Protocol
remotefs 556/tcp rfs rfs_server
rmonitor 560/udp rmonitord
monitor 561/udp
nntps 563/tcp snntp #NNTP over TLS/SSL
nntps 563/udp snntp #NNTP over TLS/SSL
whoami 565/tcp
whoami 565/udp
ms-shuttle 568/tcp #Microsoft shuttle
ms-shuttle 568/udp #Microsoft shuttle
ms-rome 569/tcp #Microsoft rome
ms-rome 569/udp #Microsoft rome
http-rpc-epmap 593/tcp #HTTP RPC Ep Map
http-rpc-epmap 593/udp #HTTP RPC Ep Map
hmmp-ind 612/tcp #HMMP Indication
hmmp-ind 612/udp #HMMP Indication
hmmp-op 613/tcp #HMMP Operation
hmmp-op 613/udp #HMMP Operation
ldaps 636/tcp sldap #LDAP over TLS/SSL
doom 666/tcp #Doom Id Software
doom 666/udp #Doom Id Software
msexch-routing 691/tcp #MS Exchange Routing
msexch-routing 691/udp #MS Exchange Routing
kerberos-adm 749/tcp #Kerberos administration
kerberos-adm 749/udp #Kerberos administration
kerberos-iv 750/udp #Kerberos version IV
mdbs_daemon 800/tcp
mdbs_daemon 800/udp
ftps-data 989/tcp #FTP data, over TLS/SSL
ftps 990/tcp #FTP control, over TLS/SSL
telnets 992/tcp #Telnet protocol over TLS/SSL
imaps 993/tcp #IMAP4 protocol over TLS/SSL
ircs 994/tcp #IRC protocol over TLS/SSL
pop3s 995/tcp spop3 #pop3 protocol over TLS/SSL (was spop3)
pop3s 995/udp spop3 #pop3 protocol over TLS/SSL (was spop3)
kpop 1109/tcp #Kerberos POP
nfsd-status 1110/tcp #Cluster status info
nfsd-keepalive 1110/udp #Client status info
nfa 1155/tcp #Network File Access
nfa 1155/udp #Network File Access
activesync 1034/tcp #ActiveSync Notifications
phone 1167/udp #Conference calling
opsmgr 1270/tcp #Microsoft Operations Manager
opsmgr 1270/udp #Microsoft Operations Manager
ms-sql-s 1433/tcp #Microsoft-SQL-Server
ms-sql-s 1433/udp #Microsoft-SQL-Server
ms-sql-m 1434/tcp #Microsoft-SQL-Monitor
ms-sql-m 1434/udp #Microsoft-SQL-Monitor
ms-sna-server 1477/tcp
ms-sna-server 1477/udp
ms-sna-base 1478/tcp
ms-sna-base 1478/udp
wins 1512/tcp #Microsoft Windows Internet Name Service
wins 1512/udp #Microsoft Windows Internet Name Service
ingreslock 1524/tcp ingres
stt 1607/tcp
stt 1607/udp
l2tp 1701/udp #Layer Two Tunneling Protocol
pptconference 1711/tcp
pptconference 1711/udp
pptp 1723/tcp #Point-to-point tunnelling protocol
msiccp 1731/tcp
msiccp 1731/udp
remote-winsock 1745/tcp
remote-winsock 1745/udp
ms-streaming 1755/tcp
ms-streaming 1755/udp
msmq 1801/tcp #Microsoft Message Queue
msmq 1801/udp #Microsoft Message Queue
radius 1812/udp #RADIUS authentication protocol
radacct 1813/udp #RADIUS accounting protocol
msnp 1863/tcp
msnp 1863/udp
ssdp 1900/tcp
ssdp 1900/udp
close-combat 1944/tcp
close-combat 1944/udp
nfsd 2049/udp nfs #NFS server
knetd 2053/tcp #Kerberos de-multiplexor
mzap 2106/tcp #Multicast-Scope Zone Announcement Protocol
mzap 2106/udp #Multicast-Scope Zone Announcement Protocol
qwave 2177/tcp #QWAVE
qwave 2177/udp #QWAVE Experiment Port
directplay 2234/tcp #DirectPlay
directplay 2234/udp #DirectPlay
ms-olap3 2382/tcp #Microsoft OLAP 3
ms-olap3 2382/udp #Microsoft OLAP 3
ms-olap4 2383/tcp #Microsoft OLAP 4
ms-olap4 2383/udp #Microsoft OLAP 4
ms-olap1 2393/tcp #Microsoft OLAP 1
ms-olap1 2393/udp #Microsoft OLAP 1
ms-olap2 2394/tcp #Microsoft OLAP 2
ms-olap2 2394/udp #Microsoft OLAP 2
ms-theater 2460/tcp
ms-theater 2460/udp
wlbs 2504/tcp #Microsoft Windows Load Balancing Server
wlbs 2504/udp #Microsoft Windows Load Balancing Server
ms-v-worlds 2525/tcp #Microsoft V-Worlds
ms-v-worlds 2525/udp #Microsoft V-Worlds
sms-rcinfo 2701/tcp #SMS RCINFO
sms-rcinfo 2701/udp #SMS RCINFO
sms-xfer 2702/tcp #SMS XFER
sms-xfer 2702/udp #SMS XFER
sms-chat 2703/tcp #SMS CHAT
sms-chat 2703/udp #SMS CHAT
sms-remctrl 2704/tcp #SMS REMCTRL
sms-remctrl 2704/udp #SMS REMCTRL
msolap-ptp2 2725/tcp #MSOLAP PTP2
msolap-ptp2 2725/udp #MSOLAP PTP2
icslap 2869/tcp
icslap 2869/udp
cifs 3020/tcp
cifs 3020/udp
xbox 3074/tcp #Microsoft Xbox game port
xbox 3074/udp #Microsoft Xbox game port
ms-dotnetster 3126/tcp #Microsoft .NET ster port
ms-dotnetster 3126/udp #Microsoft .NET ster port
ms-rule-engine 3132/tcp #Microsoft Business Rule Engine Update Service
ms-rule-engine 3132/udp #Microsoft Business Rule Engine Update Service
msft-gc 3268/tcp #Microsoft Global Catalog
msft-gc 3268/udp #Microsoft Global Catalog
msft-gc-ssl 3269/tcp #Microsoft Global Catalog with LDAP/SSL
msft-gc-ssl 3269/udp #Microsoft Global Catalog with LDAP/SSL
ms-cluster-net 3343/tcp #Microsoft Cluster Net
ms-cluster-net 3343/udp #Microsoft Cluster Net
ms-wbt-server 3389/tcp #MS WBT Server
ms-wbt-server 3389/udp #MS WBT Server
ms-la 3535/tcp #Microsoft Class Server
ms-la 3535/udp #Microsoft Class Server
pnrp-port 3540/tcp #PNRP User Port
pnrp-port 3540/udp #PNRP User Port
teredo 3544/tcp #Teredo Port
teredo 3544/udp #Teredo Port
p2pgroup 3587/tcp #Peer to Peer Grouping
p2pgroup 3587/udp #Peer to Peer Grouping
upnp-discovery 3702/tcp #UPNP v2 Discovery
dvcprov-port 3776/tcp #Device Provisioning Port
dvcprov-port 3776/udp #Device Provisioning Port
msfw-control 3847/tcp #Microsoft Firewall Control
msdts1 3882/tcp #DTS Service Port
sdp-portmapper 3935/tcp #SDP Port Mapper Protocol
sdp-portmapper 3935/udp #SDP Port Mapper Protocol
net-device 4350/tcp #Net Device
net-device 4350/udp #Net Device
ipsec-msft 4500/tcp #Microsoft IPsec NAT-T
ipsec-msft 4500/udp #Microsoft IPsec NAT-T
llmnr 5355/tcp #LLMNR
llmnr 5355/udp #LLMNR
rrac 5678/tcp #Remote Replication Agent Connection
rrac 5678/udp #Remote Replication Agent Connection
dccm 5679/tcp #Direct Cable Connect Manager
dccm 5679/udp #Direct Cable Connect Manager
ms-licensing 5720/tcp #Microsoft Licensing
ms-licensing 5720/udp #Microsoft Licensing
directplay8 6073/tcp #DirectPlay8
directplay8 6073/udp #DirectPlay8
man 9535/tcp #Remote Man Server
rasadv 9753/tcp
rasadv 9753/udp
imip-channels 11320/tcp #IMIP Channels Port
imip-channels 11320/udp #IMIP Channels Port
directplaysrvr 47624/tcp #Direct Play Server
directplaysrvr 47624/udp #Direct Play Server
sql6 7210/tcp
sapdbni72 7269/tcp
sapdp00 3200/tcp
sapdp01 3201/tcp
sapdp02 3202/tcp
sapdp03 3203/tcp
sapdp04 3204/tcp
sapdp05 3205/tcp
sapdp06 3206/tcp
sapdp07 3207/tcp
sapdp08 3208/tcp
sapdp09 3209/tcp
sapdp10 3210/tcp
sapdp11 3211/tcp
sapdp12 3212/tcp
sapdp13 3213/tcp
sapdp14 3214/tcp
sapdp15 3215/tcp
sapdp16 3216/tcp
sapdp17 3217/tcp
sapdp18 3218/tcp
sapdp19 3219/tcp
sapdp20 3220/tcp
sapdp21 3221/tcp
sapdp22 3222/tcp
sapdp23 3223/tcp
sapdp24 3224/tcp
sapdp25 3225/tcp
sapdp26 3226/tcp
sapdp27 3227/tcp
sapdp28 3228/tcp
sapdp29 3229/tcp
sapdp30 3230/tcp
sapdp31 3231/tcp
sapdp32 3232/tcp
sapdp33 3233/tcp
sapdp34 3234/tcp
sapdp35 3235/tcp
sapdp36 3236/tcp
sapdp37 3237/tcp
sapdp38 3238/tcp
sapdp39 3239/tcp
sapdp40 3240/tcp
sapdp41 3241/tcp
sapdp42 3242/tcp
sapdp43 3243/tcp
sapdp44 3244/tcp
sapdp45 3245/tcp
sapdp46 3246/tcp
sapdp47 3247/tcp
sapdp48 3248/tcp
sapdp49 3249/tcp
sapdp50 3250/tcp
sapdp51 3251/tcp
sapdp52 3252/tcp
sapdp53 3253/tcp
sapdp54 3254/tcp
sapdp55 3255/tcp
sapdp56 3256/tcp
sapdp57 3257/tcp
sapdp58 3258/tcp
sapdp59 3259/tcp
sapdp60 3260/tcp
sapdp61 3261/tcp
sapdp62 3262/tcp
sapdp63 3263/tcp
sapdp64 3264/tcp
sapdp65 3265/tcp
sapdp66 3266/tcp
sapdp67 3267/tcp
sapdp68 3268/tcp
sapdp69 3269/tcp
sapdp70 3270/tcp
sapdp71 3271/tcp
sapdp72 3272/tcp
sapdp73 3273/tcp
sapdp74 3274/tcp
sapdp75 3275/tcp
sapdp76 3276/tcp
sapdp77 3277/tcp
sapdp78 3278/tcp
sapdp79 3279/tcp
sapdp80 3280/tcp
sapdp81 3281/tcp
sapdp82 3282/tcp
sapdp83 3283/tcp
sapdp84 3284/tcp
sapdp85 3285/tcp
sapdp86 3286/tcp
sapdp87 3287/tcp
sapdp88 3288/tcp
sapdp89 3289/tcp
sapdp90 3290/tcp
sapdp91 3291/tcp
sapdp92 3292/tcp
sapdp93 3293/tcp
sapdp94 3294/tcp
sapdp95 3295/tcp
sapdp96 3296/tcp
sapdp97 3297/tcp
sapdp98 3298/tcp
sapdp99 3299/tcp
sapgw00 3300/tcp
sapgw01 3301/tcp
sapgw02 3302/tcp
sapgw03 3303/tcp
sapgw04 3304/tcp
sapgw05 3305/tcp
sapgw06 3306/tcp
sapgw07 3307/tcp
sapgw08 3308/tcp
sapgw09 3309/tcp
sapgw10 3310/tcp
sapgw11 3311/tcp
sapgw12 3312/tcp
sapgw13 3313/tcp
sapgw14 3314/tcp
sapgw15 3315/tcp
sapgw16 3316/tcp
sapgw17 3317/tcp
sapgw18 3318/tcp
sapgw19 3319/tcp
sapgw20 3320/tcp
sapgw21 3321/tcp
sapgw22 3322/tcp
sapgw23 3323/tcp
sapgw24 3324/tcp
sapgw25 3325/tcp
sapgw26 3326/tcp
sapgw27 3327/tcp
sapgw28 3328/tcp
sapgw29 3329/tcp
sapgw30 3330/tcp
sapgw31 3331/tcp
sapgw32 3332/tcp
sapgw33 3333/tcp
sapgw34 3334/tcp
sapgw35 3335/tcp
sapgw36 3336/tcp
sapgw37 3337/tcp
sapgw38 3338/tcp
sapgw39 3339/tcp
sapgw40 3340/tcp
sapgw41 3341/tcp
sapgw42 3342/tcp
sapgw43 3343/tcp
sapgw44 3344/tcp
sapgw45 3345/tcp
sapgw46 3346/tcp
sapgw47 3347/tcp
sapgw48 3348/tcp
sapgw49 3349/tcp
sapgw50 3350/tcp
sapgw51 3351/tcp
sapgw52 3352/tcp
sapgw53 3353/tcp
sapgw54 3354/tcp
sapgw55 3355/tcp
sapgw56 3356/tcp
sapgw57 3357/tcp
sapgw58 3358/tcp
sapgw59 3359/tcp
sapgw60 3360/tcp
sapgw61 3361/tcp
sapgw62 3362/tcp
sapgw63 3363/tcp
sapgw64 3364/tcp
sapgw65 3365/tcp
sapgw66 3366/tcp
sapgw67 3367/tcp
sapgw68 3368/tcp
sapgw69 3369/tcp
sapgw70 3370/tcp
sapgw71 3371/tcp
sapgw72 3372/tcp
sapgw73 3373/tcp
sapgw74 3374/tcp
sapgw75 3375/tcp
sapgw76 3376/tcp
sapgw77 3377/tcp
sapgw78 3378/tcp
sapgw79 3379/tcp
sapgw80 3380/tcp
sapgw81 3381/tcp
sapgw82 3382/tcpHi,
I had the same problem, but i didn't get any answer in that forum.
I deinstalled the SAP Software (regard the end of the threat
https://forums.sdn.sap.com/click.jspa?searchID=22036513&messageID=6625975) and then I installed the software again. Then the system ran and i didn't have any more problems with the message server.
I didn't installed the MS Loopback Adapter, because i am connected to a network.
Best regards,
Günther Klee -
Can not start Messaging server in Sun Java System Messaging Server 6 2005Q1
Hi all,
I installed Sun Java System Messaging Server 6 2005Q1 from Solaris 10 DVD on Solaris 10.
After the installation, I got directory server, admin server running but messaging server not running. I can not start Messaging server (start smtp, http, pop, imap). I found in directory which I installed messaging server but I could not see script "start-msg" and "stop-msg".
# pwd
/opt/SUNWmsgsr/sbin
# ls
MoveUser ha_ip_config imquotacheck imsdirmig mkbackupdir
UpgradeMsg5toMsg6.pl hashdir imsbackup imsexport readership
configure imexpire imsconnutil imsimport reconstruct
control-params.txt iminitquota imscripter imsrestore relinker
deliver immonitor-access imsdaaci mboxutil useconfig
Any idea what might have gone wrong?
Thanks.Thanks.
I have a problem when I configure the Messaging Server (by running the /opt/SUNWmsgsr/sbin/configure script):
Hostname mailtest for this machine is not a fully qualified domain name. Please
correct this before attempting to configure Messaging Server. Please make sure
that your DNS is working properly.
<Press ENTER to continue> {"<" goes back, "!" exits}
Can you help me fix this problem?
Thanks. -
Integrating calendar server with messaging server
hi all,
i have installed messaging server but am not able to bind messaging server and calendar server together.the calendar server does not start with ./start-cal command.i am attaching the ics.conf file below.
!!!! ics.conf Parameter Specification: You can have three kinds of records
!!!! #1) Uncommented Key: Starts with alphabet [a-z] and in the form a="b"
!!!! #2) Commented key: Start with !!<alphabet> OR !![a-z]
!!!! And in the form !!a="b" (min 7 chars length)
!!!! #3) Commented Lines: Starts with ! But not with !![a-z]
!!!! #4) Records other than types #1, #2, #3 will be ignored or won't be
!!!! processed e.g. blank lines, lines starting with non-alphabets etc..
!!!! All these parameters are SINGLE valued
!!!! Imaginary Domain Names siroe.com, varrius.com, florizel.com, and sesta.com
!!!! are used in the examples below.
! Description sent with insufficient disk space messages.
alarm.diskstat.msgalarmdescription = "percentage calendar partition diskspace available"
! Number of seconds between monitoring disk space.
alarm.diskstat.msgalarmstatinterval = "3600"
! Percentage of available disk space that triggers sending a warning message.
alarm.diskstat.msgalarmthreshold = "10"
! Whether alarm.diskavail.msgalarmthreshold is above or below percentage. -1 is below and 1 would be above.
alarm.diskstat.msgalarmthresholddirection = "-1"
! Number of hours between sending warning messages about insufficient disk space sent out.
alarm.diskstat.msgalarmwarninginterval = "24"
! Specifies the SMTP host for server alarms.
alarm.msgalarmnoticehost = "sonlinux.bg2iop.com"
! Specifies the SMTP port for server alarms.
alarm.msgalarmnoticeport = "25"
! Who are server alarms sent to?
alarm.msgalarmnoticercpt = "[email protected]"
! When server alarms are sent, who is the sender?
alarm.msgalarmnoticesender = "[email protected]"
! Default is "From: %s\nTo: %s\nSubject: ALARM: %s of \"%s\" is %u\n\n%s\n"
alarm.msgalarmnoticetemplate = ""
! Description sent with no service response messages.
alarm.responsestat.msgalarmdescription = "calendar service not responding"
! Number of seconds between monitoring services.
alarm.responsestat.msgalarmstatinterval = "3600"
! Only trigger sending a warning message if no service response.
alarm.responsestat.msgalarmthreshold = "100"
! Whether alarm.responsestat.msgalarmthreshold is above or below percentage. -1 is below and 1 would be above.
alarm.responsestat.msgalarmthresholddirection = "-1"
! Number of hours between sending warning messages about no service response sent out.
alarm.responsestat.msgalarmwarninginterval = "24"
! Enable (yes) or Disable (no) browser cache for performance reasons.
browser.cache.enable = "no"
! Retry time in seconds after a recoverable alarm delivery error.
caldb.berkeleydb.alarmretrytime = "300"
caldb.berkeleydb.archive.enable = "0"
! Interval between hotbackup or archivebackup in seconds
caldb.berkeleydb.archive.interval = "120"
! Maximum number of days of archivebackup
caldb.berkeleydb.archive.maxdays = "6"
! Minimum number of days of archivebackup
caldb.berkeleydb.archive.mindays = "3"
caldb.berkeleydb.archive.path = "/var/opt/sun/calendar/csdb/archive"
! Percentage threshold of allowable disk space usage
caldb.berkeleydb.archive.threshold = "70"
! Seconds between checkpointing.
caldb.berkeleydb.checkpointinterval = "60"
! Remove checkpoint files after synchronized? (yes/no)
caldb.berkeleydb.circularlogging = "yes"
! Milliseconds between checking database deadlocks.
caldb.berkeleydb.deadlockinterval = "100"
! Enable more advanced notifications - replyevent/refreshevent/replytodo/refreshtodo considered
! as advanced topics. By default, all these notifications will be published to
! modifyevent and modifytodo respectively. If it is enabled modifyevent will get only
! organizer updates to components and attendees replies and the refreshes triggered by replies
! to components will be published to the respective topics. (yes/no)
caldb.berkeleydb.ensmsg.advancedtopics = "no"
! Create an ENS message when a calendar is created? (yes/no)
caldb.berkeleydb.ensmsg.createcal = "no"
! Create an ENS message when an event is created? (yes/no)
caldb.berkeleydb.ensmsg.createevent = "no"
! Create an ENS message when a task is created? (yes/no)
caldb.berkeleydb.ensmsg.createtodo = "no"
! Create an ENS message when a calendar is deleted? (yes/no)
caldb.berkeleydb.ensmsg.deletecal = "no"
! Create an ENS message when an event is deleted? (yes/no)
caldb.berkeleydb.ensmsg.deleteevent = "no"
! Create an ENS message when a task is deleted? (yes/no)
caldb.berkeleydb.ensmsg.deletetodo = "no"
! Create an ENS message when a calendar is modified? (yes/no)
caldb.berkeleydb.ensmsg.modifycal = "no"
! Create an ENS message when an event is modified? (yes/no)
caldb.berkeleydb.ensmsg.modifyevent = "no"
! Create an ENS message when a task is modified? (yes/no)
caldb.berkeleydb.ensmsg.modifytodo = "no"
! Initial size of the in-memory Event Notification Server message queue. This queue stores all ENS messages other than alarm reminders.
caldb.berkeleydb.ensmsg.qsize = "10000"
! Create an ENS message when an event is refreshed? (yes/no)
caldb.berkeleydb.ensmsg.refreshevent = "no"
! Create an ENS message when a task is refreshed? (yes/no)
caldb.berkeleydb.ensmsg.refreshtodo = "no"
! Create an ENS message when an event is replied? (yes/no)
caldb.berkeleydb.ensmsg.replyevent = "no"
! Create an ENS message when a task is replied? (yes/no)
caldb.berkeleydb.ensmsg.replytodo = "no"
! Create an ENS message when a scheduling request written to the calendar is deleted? (yes/no)
caldb.berkeleydb.ensmsg.schedreq = "no"
! Physical path location of database event, task, and alarm files.
caldb.berkeleydb.homedir.path = "/var/opt/sun/calendar/csdb"
caldb.berkeleydb.hotbackup.enable = "0"
! Maximum number of days of hotbackup
caldb.berkeleydb.hotbackup.maxdays = "6"
! Path for archivebackup
!caldb.berkeleydb.archive.path
! Path for hobackup
!caldb.berkeleydb.hotbackup.path
! Enable/disable of archivebackup feature, yes/no
!caldb.berkeleydb.archive.enable
! Enable/disable of hotbackup feature, yes/no
!caldb.berkeleydb.hotbackup.enable
! Minimum number of days of hotbackup
caldb.berkeleydb.hotbackup.mindays = "3"
caldb.berkeleydb.hotbackup.path = "/var/opt/sun/calendar/csdb/hotbackup"
! Percentage threshold of allowable disk space usage
caldb.berkeleydb.hotbackup.threshold = "70"
! Max megabytes of checkpoint file.
caldb.berkeleydb.logfilesizemb = "10"
! Max threads of database.
caldb.berkeleydb.maxthreads = "10000"
! Megabytes of shared memory.
caldb.berkeleydb.mempoolsizemb = "4"
! Time before which to purge deletelog
caldb.berkeleydb.purge.deletelog.beforetime = "86400"
! Time interval between auto purge of deletelog
caldb.berkeleydb.purge.deletelog.interval = "86400"
! If "yes", open the database in readonly mode
caldb.berkeleydb.readonly = "no"
! Email of calendar database administrator.
caldb.calmaster = "[email protected]"
! Seconds between checkpointing.
caldb.cld.cache.checkpointinterval = "60"
! Remove checkpoint files after synchronized? (yes/no)
caldb.cld.cache.circularlogging = "yes"
!service.calendarsearch.ldap.primaryownersearchfilter = "(&(|(uid=*%s*)(cn=*%s*))(objectclass=icsCalendarUser))"
! Enables ("yes") or disables ("no") cld db cache
caldb.cld.cache.enable = "yes"
! Physical path location of cache database
caldb.cld.cache.homedir.path = "/var/opt/sun/calendar/csdb/cld_cache"
! Max megabytes of checkpoint file.
caldb.cld.cache.logfilesizemb = "10"
! Max threads of database.
caldb.cld.cache.maxthreads = "1000"
! Megabytes of shared memory.
caldb.cld.cache.mempoolsizemb = "4"
! Type of Calendar Lookup Database plugin to use ("local" "algorithmic" or "directory").
caldb.cld.type = "local"
! Count data base statistics? (yes/no)
caldb.counters = "yes"
! Maximum number of calendars with counters.
caldb.counters.maxinstances = "100"
! Maximum number of backlogged requests before the server obtains a new network connection.
caldb.dwp.connthreshold = "1"
! Initial number of connections for DWP client to make to each DWP host.
caldb.dwp.initconns = "2"
! Initial number of threads for handling DWP requests.
caldb.dwp.initthreads = "2"
! Maximum number of connections allowed to a DWP server.
caldb.dwp.maxcons = "1000"
! Maximum number of threads to service HTTP requests in csdwpd.
caldb.dwp.maxthreads = "1000"
! Specifies if the server performs MD5 hash checking of all DWP requests.
caldb.dwp.md5 = "n"
! IP address of a specified DWP server.
!!caldb.dwp.server.[hostname.xyz.com].ip = "a.b.c.d"
! Port number of a specified DWP server (Algorithmic CLD only).
!!caldb.dwp.server.[hostname.xyz.com].port = "59779"
! Default DWP server (LDAP CLD only), used if user's icsDWPhost value does not exist.
!!caldb.dwp.server.default = "hostname.xyz.com"
! Stack size for DWP threads.
caldb.dwp.stacksize = "65536"
! Process alarms on the alarm queue -- that is, store them in the alarm queue when an event/todo is saved
caldb.serveralarms = "1"
! Timeout for contacting ENS. If no response, we assume ENS is not running
caldb.serveralarms.acktimeout = "30"
! Dispatch -- that is, enable alarm dispatching. When an alarm trigger time arrives send out email or ENS message.
caldb.serveralarms.dispatch = "yes"
! Enable binary alarms. Used by csnotifyd and csadmind. (default: yes)
!caldb.serveralarms.binary.enable = "yes"
! Binary alarm url. Used by csnotifyd and csadmind. (default: enp:///ics/alarm)
!caldb.serveralarms.binary.url = "enp:///ics/alarm"
! Custom alarm url. Use this to get xml or calendar mime type contents
!caldb.serveralarms.url = "enp:///ics/customalarm"
! Custom alarm url contenttype. (text/xml or text/calendar)
!caldb.serveralarms.contenttype = "text/calendar"
! Dispatch type for Calendar Server alarms ("ens" o "smtp").
caldb.serveralarms.dispatchtype = "ens"
! Initial number of threads for the Event Notification Server.
caldb.serveralarms.initthreads = "0"
! Specifies how long, in seconds, the server will continue to try reconnecting to ENS before giving up. -1 means forever.
caldb.serveralarms.maxretrytime = "-1"
! Maximum number of threads for the Event Notification Server
caldb.serveralarms.maxthreads = "10"
! Time to sleep, in seconds, after a timeout connecting to ens before making another attempt to connect to ens
caldb.serveralarms.retryinterval = "5"
! Stack frame size for Event Notification Server threads.
caldb.serveralarms.stacksize = "65536"
! Total time, in seconds, to retry connecting to ENS on startup.
caldb.serveralarms.startupretrytime = "30"
! Send alarms to this SMTP host.
caldb.smtphost = "sonlinux.bg2iop.com"
! Specifies the directory in cal/bin/config containing the localized version of the files used to format email notifications.
caldb.smtpmsgfmtdir = "en"
! Specifies the SMTP port.
caldb.smtpport = "25"
! Event reminder format file.
calmail.eventreminder.fname = "mail_eventreminder.fmt"
! Event cancellation format file.
calmail.imipeventcancel.fname = "mail_eventcancel.fmt"
! Event CANCEL NOTIFICATION message format file
calmail.imipeventcancelnotification.fname = "mail_eventcancelnotification.fmt"
calmail.imipeventcancelnotificationrecur.fname = "mail_eventcancelnotificationrecur.fmt"
! Event NOTIFICATION message format file
calmail.imipeventnotification.fname = "mail_eventnotification.fmt"
calmail.imipeventnotificationrecur.fname = "mail_eventnotificationrecur.fmt"
! Event notification format file.
calmail.imipeventpublish.fname = "mail_eventpublish.fmt"
! Event REPLY message format file
calmail.imipeventreply.fname = "mail_eventreply.fmt"
! Event REQUEST message format file
calmail.imipeventrequest.fname = "mail_eventrequest.fmt"
! Task cancellation format file.
calmail.imiptodocancel.fname = "mail_todocancel.fmt"
! Task notification format file
calmail.imiptodopublish.fname = "mail_todopublish.fmt"
! Task REPLY message format file
calmail.imiptodoreply.fname = "mail_todoreply.fmt"
! Task REQUEST Message format file
calmail.imiptodorequest.fname = "mail_todorequest.fmt"
! Task reminder format file.
calmail.todoreminder.fname = "mail_todoreminder.fmt"
! Anonymous login CALID.
calstore.anonymous.calid = "anonymous"
! Does server support only two privacy types for components - PRIVATE (acts as confidential) /PUBLIC instead of PRIVATE/CONFIDENTIAL/PUBLIC
calstore.binaryprivacy.mode = "no"
! When creating new calendar of user, whether to lowercase calendar or not
! Also, when looking up calendar, whether to lowercase or not
calstore.calendar.create.lowercase = "n"
! For a newly created calendar, set the ACL to this
calstore.calendar.default.acl = "@@o^a^r^g;@@o^c^wdeic^g;@^a^fs^g;@^c^^g;@^p^r^g"
! Definition of the "owner" acl
calstore.calendar.owner.acl = "@@o^a^rsf^g;@@o^c^wdeic^g"
! Timezone ID used when importing files.
calstore.default.timezoneID = "America/New_York"
! Whether to filtering the private/confidential events on queries to server
calstore.filterprivateevents = "yes"
! Is user's default calendar included in user's freebusy-calendar-list or not
calstore.freebusy.include.defaultcalendar = "yes"
! Can user's default calendar be removed from user's freebusy-calendar-list or not
calstore.freebusy.remove.defaultcalendar = "no"
! Maximum number attendees to be allowed in a LDAP group when expanding event. Value of 0 means expand group entirely.
calstore.group.attendee.maxsize = "0"
! Maximum number of events created by recurrence
calstore.recurrence.bound = "60"
! Is user's default calendar included in user's subscribed-calendar-list or not
calstore.subscribed.include.defaultcalendar = "yes"
! Can user's default calendar be removed from user's subscribed-calendar-list or not
calstore.subscribed.remove.defaultcalendar = "no"
! For attendee calendar lookup, when encountering string that looks like (jdoe OR jdoe:tv), treat string as a userid (uid) when looking-up in Directory.
! Value can be {uid | cn | gid | res | mailto | cap}
calstore.unqualifiedattendee.fmt1.type = "uid"
! For attendee calendar lookup, when encountering string that looks like ([email protected]) (has @ sign), treat string as a mailto address when looking-up in Directory
! Value can be {uid | cn | gid | res | mailto | cap}
calstore.unqualifiedattendee.fmt2.type = "mailto"
! For attendee calendar lookup, when encountering string that looks like (John Doe) (has space), treat string as a common name (cn) when looking-up in Directory
! Value can be {uid | cn | gid | res | cap}
calstore.unqualifiedattendee.fmt3.type = "cn"
! Maximum number of results returned from LDAP lookup from user search. Value of 0 means no limit.
calstore.userlookup.maxsize = "200"
! Is Server in Virtual Domain mode or not (this affects 5.0p2 only)
calstore.virtualdomain.mode = "n"
! Enable (y) or disable (n) Access Control plugin.
csapi.plugin.accesscontrol = "n"
! Load only the plugin specified in csapi.plugin.authentication.name? (y/n)
csapi.plugin.authentication = "n"
! Enable (y) or disable (n) Calendar Lookup Database plugins.
csapi.plugin.calendarlookup = "n"
! Specifies the name of a specific Calendar Lookup Database plugin to load. If "*", load the plugins.
csapi.plugin.calendarlookup.name = "*"
! Load only the plugin specified in csapi.plugin.database.name or if not specified, load all database plugins in alphabetical order.
csapi.plugin.database = "y"
! Only load this specific plugin if csapi.plugin.loadall is no and csapi.plugin.database is yes.
csapi.plugin.database.name = "cs_caldb_berkeley10"
! Load only the plugin specified in csapi.plugin.datatranslator.name? (y/n)
csapi.plugin.datatranslator = "y"
! Only load this specific plugin if csapi.plugin.loadall is no and csapi.plugin.data translator is yes.
csapi.plugin.datatranslator.name = "cs_datatranslatorcsv10"
! Enable (y) or disable (n) database-to-output format plugins.
csapi.plugin.dbtranslator = "y"
! If "*", then load all the database-to-output format plugins. If a library name, only load that plugin. csapi.plugin.dbtranslator must be set to "yes" to load plugin
csapi.plugin.dbtranslator.name = "*"
! Load all plugins found in the plugins directory? (y/n)
csapi.plugin.loadall = "n"
! Load only the plugin specified in csapi.plugin.userprefs.name? (y/n)
csapi.plugin.userprefs = "n"
! Load only this plugin if csapi.plugin.loadall is no and csapi.plugin.userprefs is yes.
!!csapi.plugin.userprefs.name = "plugin_name"
! Enable the RSA Cypher Encryption Family Services for SSL
!!encryption.rsa.nssslactivation = "on"
! Define the Certificate name for the RSA Cypher Encryption Family
!!encryption.rsa.nssslpersonalityssl = "SampleSSLServerCert"
! Define the location of the RSA Cypher Encryption Family token
!!encryption.rsa.nsssltoken = "internal"
! Specifies if the auto refresh feature is enabled or disbaled. (yes/no)
gse.autorefreshreplystatus = "yes"
! Specifies (in seconds) how long to wait before the server scans the schedule queue for incoming jobs.
gse.belowthresholdtimeout = "3"
! Maximum number of concurrent threads the server uses to process the schedule queue.
gse.maxthreads = "10"
! Maximum length of time the server will retry to complete a group scheduling job.
gse.retryexpiredinterval = "86400"
! Specifies (in seconds) how often the server will retry a previous failing job.
gse.retryinterval = "300"
! Maximum stack size (in bytes) of a group scheduling thread
gse.stacksize = "65535"
! global flags to control notification for invitation and cancellation.
! Enable (yes) Disable (no), default is enabled. Notification will be sent.
ine.cancellation.enable = "yes"
ine.invitation.enable = "yes"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.basedir.path = "/opt/sun"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.betamajorversion = "0"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.betaminorversion = "0"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.caldbtype = "local"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.csinstalldir.path = "/opt/sun"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.csprodbasedir.path = "/opt/sun/calendar"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.csprodclassesdir.path = "/opt/sun/calendar/classes"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.csproddir.path = "/opt/sun"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.csprodjavadir.path = "???"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.csprodlibdir.path = "/opt/sun/calendar/lib"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.csprodtoolsdir.path = "/opt/sun/calendar/tools"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.csproduicustdir.path = "/opt/sun/calendar/uicust"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.fullversion = "6.0"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.majorversion = "6"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.minorversion = "0"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.osarch = "i386"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.osname = "linux"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.ostype = "unix"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.osversion = "2.6.9-22.el"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.patchversion = "0"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.serveruidpassword = "icsuser"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.startupafterinstall = "no"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.startupatboot = "no"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.userauthtype = "ldap"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.userprefstype = "ldap"
! WARNING: DO NOT CHANGE OR DELETE THE FOLLOWING CONFIGURATION FILE ENTRY.
! THIS ENTRY WAS AUTOMATICALLY GENERATED BY THE INSTALLATION PROGRAM.
! IT IS USED ONLY BY THE INSTALLATION AND UNINSTALLATION PROGRAMS.
! THIS ENTRY IS COMPLETELY IGNORED BY ALL OF THE INSTALLED PRODUCTS.
! IF YOU CHANGE OR DELETE THIS ENTRY, THE INSTALLATION AND UNINSTALLATION
! PROGRAMS COULD FAIL THE NEXT TIME THEY ARE RUN.
install.version = "6.0"
! Base DN for LDAP authentication. If not specified, use local.ugldapbasedn.
local.authldapbasedn = "o=bg2iop.com, dc=bg2iop,dc=com"
! Bind credentials (password) for user specified in local.authldapbinddn.
local.authldapbindcred = "admin123"
! DN used to bind to LDAP authentication host to search for user's dn.
local.authldapbinddn = "cn=Directory Manager"Hi Venigalla,
You can implement a federated portal network (FPN) using the SAP NetWeaver platform to share content between portals.
A federated portal network allows organizations with distributed portal installations, both SAP and non-SAP, to provide a single portal access point per user to portal information, services and applications distributed on portals in the network.
WSRP-based application sharing (FPN Mode used for for integrating content between SAP and Non SAP portals) :-
--> Content administrators on a SAP NetWeaver consumer portal can integrate WSRP portlets (i.e. iViews) from remote non-SAP portals into SAP NetWeaver Portal.
--> SAP NetWeaver developers can create WSRP compliant iViews that can be consumed in non-SAP consumer portals.
You may kindly go through the below link, should be helpful:
http://help.sap.com/saphelp_nw70/helpdata/EN/43/23fb36cad10d23e10000000a1553f7/frameset.htm
Regards,
Anagha -
Hello gurus,
System: Solution Manager
OS: Windows 2003 server R2 X32
DB: Microsoft SQL server 2005
I have an error when I tried to start my solution manager system, after having done a kernel upgrade (for the level 201)
I donu00B4t know why but the error (as you see in following image) itu00B4s in the java stack more particularly in disp+work.EXE Dispatcher with the status "Running, Message Server connection ok, Dialog Queue time: 0.00 sec, J2EE status info unavailable".
http://img6.imageshack.us/img6/7067/solmanj2eeerror.png
Can you help me whatu00B4s the problem here?
This next text itu00B4s a dev_disp log... maybe with this you get the error and the solution for that! :
trc file: "dev_disp", trc level: 1, release: "700"
sysno 01
sid PSM
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 201
intno 20050900
make: multithreaded, ASCII, optimized
pid 756
Sun Jul 05 21:08:44 2009
kernel runs with dp version 242(ext=110) (@(#) DPLIB-INT-VERSION-242)
length of sys_adm_ext is 364 bytes
*** SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 756) [dpxxdisp.c 1287]
shared lib "dw_xml.dll" version 201 successfully loaded
shared lib "dw_xtc.dll" version 201 successfully loaded
shared lib "dw_stl.dll" version 201 successfully loaded
shared lib "dw_gui.dll" version 201 successfully loaded
shared lib "dw_mdm.dll" version 201 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
Sun Jul 05 21:08:49 2009
*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5518]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >salzburgo_PSM_01 <
DpShMCreate: sizeof(wp_adm) 16464 (1176)
DpShMCreate: sizeof(tm_adm) 3786880 (18840)
DpShMCreate: sizeof(wp_ca_adm) 18048 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1296)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 055C0040, size: 4419544)
DpShMCreate: allocated sys_adm at 055C0040
DpShMCreate: allocated wp_adm at 055C1BF8
DpShMCreate: allocated tm_adm_list at 055C5C48
DpShMCreate: allocated tm_adm at 055C5C78
DpShMCreate: allocated wp_ca_adm at 059624F8
DpShMCreate: allocated appc_ca_adm at 05966B78
DpShMCreate: allocated comm_adm at 059682E8
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 059E9198
DpShMCreate: allocated gw_adm at 059E91D8
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 059E9208
DpShMCreate: allocated wall_adm at 059E9210
MBUF state OFF
DpCommInitTable: init table for 500 entries
rdisp/queue_size_check_value : -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
J2EE server info
start = TRUE
state = STARTED
pid = 5700
argv[0] = D:\usr\sap\PSM\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\PSM\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\PSM\SYS\profile\PSM_DVEBMGS01_salzburgo
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=65000
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=PSM
argv[7] = -DSAPMYNAME=salzburgo_PSM_01
argv[8] = -DSAPPROFILE=D:\usr\sap\PSM\SYS\profile\PSM_DVEBMGS01_salzburgo
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( salzburgo) [dpxxdisp.c 12527]
DpStartStopMsg: send start message (myname is >salzburgo_PSM_01 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: Checking Downtime Configuration of Monitoring Segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpJ2eeLogin: j2ee state = CONNECTED
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 201
Release check o.K.
Sun Jul 05 21:08:55 2009
MBUF state ACTIVE
DpModState: change server state from STARTING to ACTIVE
Sun Jul 05 21:08:57 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
*** ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1444
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2040) [nixxi.cpp 4424]
*** ERROR => DpJ2eeMsgProcess: NiRead failed (NIECONN_BROKEN) [dpxxj2ee.c 1212]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
Sun Jul 05 21:09:29 2009
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Sun Jul 05 21:09:49 2009
J2EE server info
start = TRUE
state = STARTED
pid = 2168
argv[0] = D:\usr\sap\PSM\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\PSM\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\PSM\SYS\profile\PSM_DVEBMGS01_salzburgo
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64999
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=PSM
argv[7] = -DSAPMYNAME=salzburgo_PSM_01
argv[8] = -DSAPPROFILE=D:\usr\sap\PSM\SYS\profile\PSM_DVEBMGS01_salzburgo
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Sun Jul 05 21:09:52 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
*** ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1440
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2126) [nixxi.cpp 4424]
*** ERROR => DpJ2eeMsgProcess: NiRead failed (NIECONN_BROKEN) [dpxxj2ee.c 1212]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
Sun Jul 05 21:10:09 2009
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Sun Jul 05 21:10:29 2009
J2EE server info
start = TRUE
state = STARTED
pid = 5484
argv[0] = D:\usr\sap\PSM\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\PSM\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\PSM\SYS\profile\PSM_DVEBMGS01_salzburgo
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64997
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=PSM
argv[7] = -DSAPMYNAME=salzburgo_PSM_01
argv[8] = -DSAPPROFILE=D:\usr\sap\PSM\SYS\profile\PSM_DVEBMGS01_salzburgo
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Sun Jul 05 21:10:32 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
*** ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1532
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2133) [nixxi.cpp 4424]
*** ERROR => DpJ2eeMsgProcess: NiRead failed (NIECONN_BROKEN) [dpxxj2ee.c 1212]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
Sun Jul 05 21:10:49 2009
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Sun Jul 05 21:11:09 2009
J2EE server info
start = TRUE
state = STARTED
pid = 3348
argv[0] = D:\usr\sap\PSM\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\PSM\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\PSM\SYS\profile\PSM_DVEBMGS01_salzburgo
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64996
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=PSM
argv[7] = -DSAPMYNAME=salzburgo_PSM_01
argv[8] = -DSAPPROFILE=D:\usr\sap\PSM\SYS\profile\PSM_DVEBMGS01_salzburgo
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Sun Jul 05 21:11:12 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
*** ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1436
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2144) [nixxi.cpp 4424]
*** ERROR => DpJ2eeMsgProcess: NiRead failed (NIECONN_BROKEN) [dpxxj2ee.c 1212]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
Sun Jul 05 21:11:29 2009
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Sun Jul 05 21:11:49 2009
J2EE server info
start = TRUE
state = STARTED
pid = 1868
argv[0] = D:\usr\sap\PSM\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\PSM\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\PSM\SYS\profile\PSM_DVEBMGS01_salzburgo
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64995
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=PSM
argv[7] = -DSAPMYNAME=salzburgo_PSM_01
argv[8] = -DSAPPROFILE=D:\usr\sap\PSM\SYS\profile\PSM_DVEBMGS01_salzburgo
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Sun Jul 05 21:11:52 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
*** ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1444
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2152) [nixxi.cpp 4424]
*** ERROR => DpJ2eeMsgProcess: NiRead failed (NIECONN_BROKEN) [dpxxj2ee.c 1212]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
Sun Jul 05 21:12:09 2009
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Sun Jul 05 21:12:29 2009
DpEnvCheckJ2ee: switch off j2ee start flag
Best regards,
Jou00E3o Dimas - Portugal
Edited by: Jou00E3o Dimas on Jul 5, 2009 11:39 PMHi uday kumar,
First thank you to tried to help me!
--> So... I have a problem... in that checked that you asked, I donu00B4t have acess to all clients in system... Iu00B4m only able to login to client 000 and 100 and in that clients that two users SAPJSF and J2ee_admin donu00B4t exist!! But maybe in 001... I donu00B4t know!! Itu00B4s any other way to know that? I think through configtool in j2ee directory... but I donu00B4t get that, maybe because I donu00B4t have the JAVA part active!!
--> And other thing, you recommed me to "Check the profile parameters once, try change the JVM setting and check were you able to start the server"... What you want to say with JVM setting.. sorry Iu00B4m still newest in sap world... can you explain me better what you wanted to say..?! Thanks.
--> Other think and the last... I checked the sapstartsrv.log in D:\usr\sap\PSM\SCS00\work directory path and in that it said this:
trc file: "sapstartsrv.log", trc level: 0, release: "700"
Mon Mar 09 11:13:46 2009
<<- ERROR: SapSSLInit(read_profile=1)==SSSLERR_LIB_NOT_FOUND
Can you help me?!... thanks a lot!
Best regards,
Jou00E3o Dimas - Portugal -
Installing Messaging Server on Windows XP
Folks, I'm trying very hard to install the Messaging Server on my laptop running XP. Actually, I'm interested in evaluating the Calendar Server, but it seems I need the SJSMS as well if I want to be able to programmatically subscribe to notification events when items change on the SJSCS.
Unfortunately, I can't really tell if the darned thing installs as part of the JES installation. It doesn't show up in the program group under Sun whereas Calendar Server, Portal Server, etc. all show up.
So I tried re-installing just the Messaging Server. It promptly removed everything else from the Start->All Programs->Sun program group. The other bits and pieces still have their directories all available, but interestingly, the log now shows that calendar server isn't running any more. Still no Messaging server in the Sun program group.
So I tried re-installing yet another time. This time is claimed to UNINSTALL the SJSMS!
I'm at the point where I plan to uninstall the entire JES and start again. This is an evaluation install, so I'm just hoping to have the Calendar Server and the Messaging Server (and of course, the Directory Server as it's a required component for the other two).
My question: Does the SJSMS work on XP? If so, what's a good way to test? I can't seem to find the JBiff.java program anywhere on my system, although the docs indicate that's what I should use for testing! I also can't find it online at Sun's web site.
Thanks,
MKJava Enterprise System 2005 Q4 supports Windows XP as developer evaluation platform. Messaging, Calendar are part of this release. Both can be evaluated on Windows XP starting from 2005 Q1 release.
From the original message, the main issue seem to be missing Messaging in Program groups. Messaging Server is not directly
installer under C:\Sun similar to other products, it is installed C:\Sun\server-root as it requries the Administration Server.
There should be services created for Messaging
Please see the summary.txt file in your install root that describes where Messaging has been installed and other details thaat are used for setting up the evaluation configuration.
To evaluate calendar, select custom option, choose 'configure automatically; in product selection, uncheck all products, select Calendar (which auto selects other dependencies),and proceed. -
"Not an executable or is a link" errors when starting Messaging Server
"Not an executable or is a link" errors when starting Messaging Server
<P>
If Calendar Server 3.x has been installed to the same server root
as Messaging server, it is possible that the command 'NscpMail start'
to restart the server will return a string of errors:
# /etc/NscpMail start
19971207145610:Dispatch:Notification:Local Module
(Account-Handler) is not a n executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Account-Manager) is not a n executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(AutoReply-Handler) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Configuration-Manager) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Error-Handler) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Mailbox-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Program-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(SMTP-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(SMTP-Router) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(UNIX-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(Finger-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(IMAP4-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(POP3-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(SMTP-Accept) is not an executable or is a link.
Module not loaded.
Startup Problem:
Module Error-Handler is required for proper operation.
Netscape Messaging Server Exiting!
The Calendar server 3.x installation may have changed the permissions
on [server-root]/bin directory from 755 to 750. Simply issue the
command (as root) 'chmod 755 [server-root]/bin' and then start
the server with the 'NscpMail start' command, and it should start
without a problem."Not an executable or is a link" errors when starting Messaging Server
<P>
If Calendar Server 3.x has been installed to the same server root
as Messaging server, it is possible that the command 'NscpMail start'
to restart the server will return a string of errors:
# /etc/NscpMail start
19971207145610:Dispatch:Notification:Local Module
(Account-Handler) is not a n executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Account-Manager) is not a n executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(AutoReply-Handler) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Configuration-Manager) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Error-Handler) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Mailbox-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(Program-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(SMTP-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(SMTP-Router) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Local Module
(UNIX-Deliver) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(Finger-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(IMAP4-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(POP3-Server) is not an executable or is a link.
Module not loaded.
19971207145610:Dispatch:Notification:Network Module
(SMTP-Accept) is not an executable or is a link.
Module not loaded.
Startup Problem:
Module Error-Handler is required for proper operation.
Netscape Messaging Server Exiting!
The Calendar server 3.x installation may have changed the permissions
on [server-root]/bin directory from 755 to 750. Simply issue the
command (as root) 'chmod 755 [server-root]/bin' and then start
the server with the 'NscpMail start' command, and it should start
without a problem.
Maybe you are looking for
-
A/R and A/P Rounding Customization
hii, I have tried the above Functionally:- I am trying to roundoff the total for the A/R and A/P Documents. The problem is I am not able to select rounding off for A/R and A/P at the same time. If I Select the option of rounding off in (Administratio
-
Strange artifacts in slide show crossfade
One of my course attendees had a strange problem on her iPad. During a crossfade from one state to another (as a tabbed panel) the overlayed elements (some texts) appeared with a slight ring of strange jitters around it. See for yourself, I took a sc
-
Hi, I have got following project : an axis webcam displays an image thanks to http protocol at the right of my image, I have to create a panel with some java controls. I would like some hints on howto do this? Do I need a to setup a web server or is
-
Open Frame from MainFrame Menu item
I created new Frame, and I want to open this frame from Main Frame menu item. Help me
-
Anyone know where that file would be?