(MHDDK) How to realize the synchronization of read and write for long time by cart PCI6025E
I've finished the programming of the process read and write for the PCI6025E, I can read and write the data now, I wanna synchronize both of the processes, writing the data into the card just after the reading from the card, and check the wave in the oscilloscope. when I use the SEC , it works, but when I changed to MSEC, the wave only come out for a few seconds, even if I bloc 60sec, and also the wave is not steady. why?
so now the problem is how could I write the data immediately which just read and it's for a long time I asked?
Thanks in advance!
Hi Jack,
aiex4.cpp doesn't exist, as far as I can tell. I believe that while the examples were being named, the developer mis-numbered them and just skipped 4 :-S
At any rate, if you already have AI and AO working separately, and you have the I/O performance you application requires, then you may not need to add DMA to your driver. However, if you want to add DMA, it won't be very difficult. In essence, you would need mix code from the S and M Series examples. The S Series example aiex2.cpp shows two things: the few lines of code you need to add DMA objects (lines 70-78), and how to program the STC to use DMA (line 114). And aiex3.cpp from the M Series examples gives a clearer picture of how to control and read the DMA channel.
Thanks, Rolf, for your time and help :-) I'm grateful for your contributions, and I'm glad to see active developers in the DDK forum.
Joe Friedchicken
NI VirtualBench Application Software
Get with your fellow hardware users :: [ NI's VirtualBench User Group ]
Get with your fellow OS users :: [ NI's Linux User Group ] [ NI's OS X User Group ]
Get with your fellow developers :: [ NI's DAQmx Base User Group ] [ NI's DDK User Group ]
Senior Software Engineer :: Multifunction Instruments Applications Group
Software Engineer :: Measurements RLP Group (until Mar 2014)
Applications Engineer :: High Speed Product Group (until Sep 2008)
Similar Messages
-
I've tried safe mode but I dont understand what is happening. I tried pressing the power button on and off for several times and nothing happens, I'm always stuck on an apple logo and a spinning wheel. I dont know how to get to the Partition and the DiskUtility. The Apple Logo and the Progress Indicator will continue to spin and I have literally no idea what to do. i am in desperate need of help. help me pls
Turn it off.
Start it up again and (at the sound of the chime) press and hold the command and the R keys, hold them down until Recovery loads. When it does you will select Disk Utility and you should be on the First Aid tab when it opens, if you are not please select it. Then select the partition (in the side bar, 2nd entry on the list, see picture).
Yours is probably called Macintosh HD.
Once you have selected it go to the lower righthand corner of the First Aid dialog and press Repair Disk.
This will take 10 minutes approximately. Post back when it is finished and tell me what it says. -
I've tried safe mode but I dont understand what is happening. I tried pressing the power button on and off for several times and nothing happens, I'm always stuck on an apple logo and a spinning wheel. I dont know how to get to the Partition and the DiskUtility. The Apple Logo and the Progress Indicator will continue to spin and I have literally no idea what to do. i am in desperate need of help. help me pls
Reboot hold the command R for recovery.
-
I have the latest Mac Air 13" and I have a Seagate 500MB external hard disk I cant copy or Cut any files on the hard disk and I cant even delete any files. I have the settings as Read and Write in the get info tab. Please helpand also note that my hard drive was formatted on a Windows 7 Laptop.
thats the problem, its in MSDos (Fat) or NTFS for Windows.
Options.....
1. offload all that data on the HD onto your PC, THEN format the HD in EXFAT for use on BOTH PC and Mac for read/write.....then reload all (or as you need) that data back onto the HD
2. get another HD, and format it for Mac OSX extended journaled.
FAT32 (File Allocation Table)
Read/Write FAT32 from both native Windows and native Mac OS X.
Maximum file size: 4GB.
Maximum volume size: 2TB
You can use this format if you share the drive between Mac OS X and Windows computers and have no files larger than 4GB.
NTFS (Windows NT File System)
Read/Write NTFS from native Windows.
Read only NTFS from native Mac OS X
To Read/Write/Format NTFS from Mac OS X, here are some alternatives:
For Mac OS X 10.4 or later (32 or 64-bit), install Paragon (approx $20) (Best Choice for Lion)
Native NTFS support can be enabled in Snow Leopard and Lion, but is not advisable, due to instability.
AirPort Extreme (802.11n) and Time Capsule do not support NTFS
Maximum file size: 16 TB
Maximum volume size: 256TB
You can use this format if you routinely share a drive with multiple Windows systems.
HFS+ ((((MAC FORMAT))) (Hierarchical File System, a.k.a. Mac OS Extended (Journaled) Don't use case-sensitive)
Read/Write HFS+ from native Mac OS X
Required for Time Machine or Carbon Copy Cloner or SuperDuper! backups of Mac internal hard drive.
To Read HFS+ (but not Write) from Windows, Install HFSExplorer
Maximum file size: 8EiB
Maximum volume size: 8EiB
You can use this format if you only use the drive with Mac OS X, or use it for backups of your Mac OS X internal drive, or if you only share it with one Windows PC (with MacDrive installed on the PC)
EXFAT (FAT64) ------Can read/write from both PC and Mac
Supported in Mac OS X only in 10.6.5 or later.
Not all Windows versions support exFAT.
exFAT (Extended File Allocation Table)
AirPort Extreme (802.11n) and Time Capsule do not support exFAT
Maximum file size: 16 EiB
Maximum volume size: 64 ZiB
You can use this format if it is supported by all computers with which you intend to share the drive. See "disadvantages" for details. -
I have been trying to download photos too my MAC. It keeps saying can't create file, please check permissions on destination folder. Ihave made sure I have set the permissions on read and write. What am I doing wrong?
Lanakivee
Try this it worked for me Pat Willener gave it to me off the site :
I have not read all you wrote, so I may have missed some points. As I understand it, you installed FP 10 on IE7, but it won't play any Flash content?
Try this
download the FP uninstaller from http://www.adobe.com/go/tn_14157
close all browser windows, then run the uninstaller
download the offline ActivX installer for Internet Explorer from http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe
close all browser windows, then run the installer -
I I have a 1 TG external drive that is formatted to Windows NTFS and is read only, how do i get it to read and write on my Mac OS X 10.6.3?
Install software such as Paragon NTFS, or reformat it as Mac OS Extended (Journaled) or FAT32. Mac OS X 10.6.5 and newer can also read and write exFAT partitions.
(97498) -
my itunes keeps asking me to set my permissions. they are set to read and write for all accounts, admin, everybody, etc. don't know why it won't let me download
Ever find a real solution to this? I just posted something similar - been having the issues ever since I started using the mac.
I have 5 mac accounts: 2 of those are admins.
After I installed every program I may possibly want, I redid all my user accounts (as I had been having a lot of permissions issues before that). My (admin) account downloads fine. Another admin account, set up exactly as mine, periodically gets prompted that it doesn't have the right to download.
To avoid duplication, I have a /common/music directory for all itunes accounts music. We have to periodically do a recursive permissions deal on the 2nd admin account so it can put music there, even though that directory is read/write for everyone. Apple's never been able to help me on this... -
I deleted the photos via Finder and empty trash long time ago. The thing is, that I want to recover one event or album. The event appears in the iphoto but when open, it shows "!". Is it possible to recover the photos?
No. When you removed the photos via the finder you damage the library. Photos should always be removed from the library using iPhoto, never with the Finder.
If you have a Time Machine backup of the library from before you deleted the photos you can restore the library to the Desktop and export that album from it to import into your current library.
It's been too long to be able to try one of the file recovery applications. You sure to have overwritten those files with new files since them.
OT -
When I move this version (3.6.12) to the applications folder on a new i-Mac, I get the message that I "do not have permission to access some of the items." I do have read and write rights on all applications and hard drive. Any ideas?
* Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
* Trash the current Firefox application to do a clean (re)install.
* Install the new version that you have downloaded.
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data. -
How do I get .jpg's to automatically be read and write for everyone
When I save a photo in Photoshop CS6 v13, as a .jpg file, it automatically gives me read and write permission, but not others. This is a pain as I have to change it each time I want to send someone a photo. Anywhere I can make it happen automatically?
Thanks for responding JJMack. Im using OSX 10.8.4 Mac.
Ill just save it on my laptop in any old folder. -
Why does this class not read and write at same time???
I had another thread where i was trying to combine two class files together
http://forum.java.sun.com/thread.jspa?threadID=5146796
I managed to do it myself but when i run the file it does not work right. If i write a file then try and open the file it says there are no records in the file, but if i close the gui down and open the file everything get read in as normal can anybody tell me why?
import java.io.*;
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import bank.BankUI;
import bank.*;
public class testing extends JFrame {
private ObjectOutputStream output;
private BankUI userInterface;
private JButton SaveToFile, SaveAs, Exit; //////////savetofile also saves to store need to split up and have 2 buttons
//private Store store; MIGHT BE SOMETHING TO DO WITH THIS AS I HAD TO COMMENT THIS STORE OUT TO GET IT WORKING AS STORE IS USED BELOW
private Employee record;
//////////////////////////////////////from read
private ObjectInputStream input;
private JButton nextButton, openButton, nextRecordButton ;
private Store store = new Store(100);
private Employee employeeList[] = new Employee[100];
private int count = 0, next = 0;
/////////////////////////////////////////////from read end
// set up GUI
public testing()
super( "Employee Data" ); // appears in top of gui
// create instance of reusable user interface
userInterface = new BankUI( 9 ); // nine textfields
getContentPane().add( userInterface, BorderLayout.CENTER );
// configure button doTask1 for use in this program
SaveAs = userInterface.getSaveAsButton();
SaveAs.setText( "Save as.." );
//////////////////from read
openButton = userInterface.getOpenFileButton();
openButton.setText( "Open File" );
openButton.addActionListener(
// anonymous inner class to handle openButton event
new ActionListener() {
// close file and terminate application
public void actionPerformed( ActionEvent event )
openFile();
} // end anonymous inner class
); // end call to addActionListener
// register window listener for window closing event
addWindowListener(
// anonymous inner class to handle windowClosing event
new WindowAdapter() {
// close file and terminate application
public void windowClosing( WindowEvent event )
if ( input != null )
closeFile();
System.exit( 0 );
} // end anonymous inner class
); // end call to addWindowListener
// get reference to generic task button doTask2 from BankUI
nextButton = userInterface.getDoTask2Button();
nextButton.setText( "Next Record" );
nextButton.setEnabled( false );
// register listener to call readRecord when button pressed
nextButton.addActionListener(
// anonymous inner class to handle nextRecord event
new ActionListener() {
// call readRecord when user clicks nextRecord
public void actionPerformed( ActionEvent event )
readRecord();
} // end anonymous inner class
); // end call to addActionListener
//get reference to generic task button do Task3 from BankUI
// get reference to generic task button doTask3 from BankUI
nextRecordButton = userInterface.getDoTask3Button();
nextRecordButton.setText( "Get Next Record" );
nextRecordButton.setEnabled( false );
// register listener to call readRecord when button pressed
nextRecordButton.addActionListener(
// anonymous inner class to handle nextRecord event
new ActionListener() {
// call readRecord when user clicks nextRecord
public void actionPerformed( ActionEvent event )
getNextRecord();
} // end anonymous inner class
); // end call to addActionListener
///////////from read end
// register listener to call openFile when button pressed
SaveAs.addActionListener(
// anonymous inner class to handle openButton event
new ActionListener() {
// call openFile when button pressed
public void actionPerformed( ActionEvent event )
SaveLocation();
} // end anonymous inner class
); // end call to addActionListener
// configure button doTask2 for use in this program
SaveToFile = userInterface.getSaveStoreToFileButton();
SaveToFile.setText( "Save to store and to file need to split this task up" );
SaveToFile.setEnabled( false ); // disable button
// register listener to call addRecord when button pressed
SaveToFile.addActionListener(
// anonymous inner class to handle enterButton event
new ActionListener() {
// call addRecord when button pressed
public void actionPerformed( ActionEvent event )
addRecord(); // NEED TO SPLIT UP SO DONT DO BOTH
} // end anonymous inner class
); // end call to addActionListener
Exit = userInterface.getExitAndSaveButton();
Exit.setText( "Exit " );
Exit.setEnabled( false ); // disable button
// register listener to call addRecord when button pressed
Exit.addActionListener(
// anonymous inner class to handle enterButton event
new ActionListener() {
// call addRecord when button pressed
public void actionPerformed( ActionEvent event )
addRecord(); // adds record to to file
closeFile(); // closes everything
} // end anonymous inner class
); // end call to addActionListener
// register window listener to handle window closing event
addWindowListener(
// anonymous inner class to handle windowClosing event
new WindowAdapter() {
// add current record in GUI to file, then close file
public void windowClosing( WindowEvent event )
if ( output != null )
addRecord();
closeFile();
} // end anonymous inner class
); // end call to addWindowListener
setSize( 600, 500 );
setVisible( true );
store = new Store(100);
} // end CreateSequentialFile constructor
// allow user to specify file name
////////////////from read
// enable user to select file to open
private void openFile()
// display file dialog so user can select file to open
JFileChooser fileChooser = new JFileChooser();
fileChooser.setFileSelectionMode( JFileChooser.FILES_ONLY );
int result = fileChooser.showOpenDialog( this );
// if user clicked Cancel button on dialog, return
if ( result == JFileChooser.CANCEL_OPTION )
return;
// obtain selected file
File fileName = fileChooser.getSelectedFile();
// display error if file name invalid
if ( fileName == null || fileName.getName().equals( "" ) )
JOptionPane.showMessageDialog( this, "Invalid File Name",
"Invalid File Name", JOptionPane.ERROR_MESSAGE );
else {
// open file
try {
input = new ObjectInputStream(
new FileInputStream( fileName ) );
openButton.setEnabled( false );
nextButton.setEnabled( true );
// process exceptions opening file
catch ( IOException ioException ) {
JOptionPane.showMessageDialog( this, "Error Opening File",
"Error", JOptionPane.ERROR_MESSAGE );
} // end else
} // end method openFile
public void readRecord() // need to merger with next record
Employee record;
// input the values from the file
try {
record = ( Employee ) input.readObject();
employeeList[count++]= record;
store.add(record);/////////ADDS record to Store
store.displayAll();
System.out.println("Count is " + store.getCount());
// create array of Strings to display in GUI
String values[] = {
String.valueOf(record.getName()),
String.valueOf(record.getGender()),
String.valueOf( record.getDateOfBirth()),
String.valueOf( record.getID()),
String.valueOf( record.getStartDate()),
String.valueOf( record.getSalary()),
String.valueOf( record.getAddress()),
String.valueOf( record.getNatInsNo()),
String.valueOf( record.getPhone())
// i added all those bits above split onto one line to look neater
// display record contents
userInterface.setFieldValues( values );
// display message when end-of-file reached
catch ( EOFException endOfFileException ) {
nextButton.setEnabled( false );
nextRecordButton.setEnabled( true );
JOptionPane.showMessageDialog( this, "No more records in file",
"End of File", JOptionPane.ERROR_MESSAGE );
// display error message if class is not found
catch ( ClassNotFoundException classNotFoundException ) {
JOptionPane.showMessageDialog( this, "Unable to create object",
"Class Not Found", JOptionPane.ERROR_MESSAGE );
// display error message if cannot read due to problem with file
catch ( IOException ioException ) {
JOptionPane.showMessageDialog( this,
"Error during read from file",
"Read Error", JOptionPane.ERROR_MESSAGE );
} // end method readRecord
private void getNextRecord()
Employee record = employeeList[next++%count];//cycles throught accounts
//create aray of string to display in GUI
String values[] = {String.valueOf(record.getName()),
String.valueOf(record.getGender()),
String.valueOf( record.getStartDate() ), String.valueOf( record.getAddress()),
String.valueOf( record.getNatInsNo()),
String.valueOf( record.getPhone()),
String.valueOf( record.getID() ),
String.valueOf( record.getDateOfBirth() ),
String.valueOf( record.getSalary() ) };
//display record contents
userInterface.setFieldValues(values);
//display record content
///////////////////////////////////from read end
private void SaveLocation()
// display file dialog, so user can choose file to open
JFileChooser fileChooser = new JFileChooser();
fileChooser.setFileSelectionMode( JFileChooser.FILES_ONLY );
int result = fileChooser.showSaveDialog( this );
// if user clicked Cancel button on dialog, return
if ( result == JFileChooser.CANCEL_OPTION )
return;
File fileName = fileChooser.getSelectedFile(); // get selected file
// display error if invalid
if ( fileName == null || fileName.getName().equals( "" ) )
JOptionPane.showMessageDialog( this, "Invalid File Name",
"Invalid File Name", JOptionPane.ERROR_MESSAGE );
else {
// open file
try {
output = new ObjectOutputStream(
new FileOutputStream( fileName ) );
SaveAs.setEnabled( false );
SaveToFile.setEnabled( true );
Exit.setEnabled( true );
// process exceptions from opening file
catch ( IOException ioException ) {
JOptionPane.showMessageDialog( this, "Error Opening File",
"Error", JOptionPane.ERROR_MESSAGE );
} // end else
} // end method openFile
// close file and terminate application
private void closeFile()
// close file
try {
//you want to cycle through each recordand add them to store here.
int storeSize = store.getCount();
for (int i = 0; i<storeSize;i++)
output.writeObject(store.elementAt(i));
output.close();
input.close();// from read!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
System.exit( 0 );
// process exceptions from closing file
catch( IOException ioException ) {
JOptionPane.showMessageDialog( this, "Error closing file",
"Error", JOptionPane.ERROR_MESSAGE );
System.exit( 1 );
} // end method closeFile
// add record to file
public void addRecord()
int employeeNumber = 0;
String fieldValues[] = userInterface.getFieldValues();
// if account field value is not empty
if ( ! fieldValues[ BankUI.IDNUMBER ].equals( "" ) ) {
// output values to file
try {
employeeNumber = Integer.parseInt(
fieldValues[ BankUI.IDNUMBER ] );
String dob = fieldValues[ BankUI.DOB ];
String[] dateofBirth = dob.split ("-"); // what used to put between number chnage to /
String sDate = fieldValues[ BankUI.START ];
String[] startDate = sDate.split ("-");
String sex = fieldValues[ BankUI.GENDER ];
char gender = (sex.charAt(0)); // check if m or f prob check in employee
if ( employeeNumber >= 0 ) {
/* create new record =String name, char gender, Date dob, String add, String nin, String phone, String id, Date start, float salary*/
record = new Employee(
fieldValues[ BankUI.NAME ],
gender,
new Date( Integer.parseInt(dateofBirth[0]),
Integer.parseInt(dateofBirth[1]),
Integer.parseInt(dateofBirth[2])),
fieldValues[ BankUI.ADDRESS ],
fieldValues[ BankUI.NATINTNO ],
fieldValues[ BankUI.PHONE ],
fieldValues[ BankUI.IDNUMBER ],
new Date( Integer.parseInt(startDate[0]),
Integer.parseInt(startDate[1]),
Integer.parseInt(startDate[2])),
Float.parseFloat( fieldValues[ BankUI.SALARY ] ));
if (!store.isFull())
store.add(record);
else
JOptionPane.showMessageDialog( this, "The Store is full you cannot add\n"+
"anymore employees. \nPlease Save Current File and Create a New File." );
System.out.println("Store full");
store.displayAll();
System.out.println("Count is " + store.getCount());
// output record and flush buffer
//output.writeObject( record );
output.flush();
else
JOptionPane.showMessageDialog( this,
"Account number must be greater than 0",
"Bad account number", JOptionPane.ERROR_MESSAGE );
// clear textfields
userInterface.clearFields();
} // end try
// process invalid account number or balance format
catch ( NumberFormatException formatException ) {
JOptionPane.showMessageDialog( this,
"Bad ID number, Date or Salary", "Invalid Number Format",
JOptionPane.ERROR_MESSAGE );
// process exceptions from file output
catch ( ArrayIndexOutOfBoundsException ArrayException ) {
JOptionPane.showMessageDialog( this, "Error with Start Date or Date of Birth\nPlease enter like: 01-01-2001",
"IO Exception", JOptionPane.ERROR_MESSAGE );
// process exceptions from file output
catch ( IOException ioException ) {
JOptionPane.showMessageDialog( this, "Error writing to file",
"IO Exception", JOptionPane.ERROR_MESSAGE );
closeFile();
} // end if
} // end method addRecord
public static void main( String args[] )
new testing();
} // end class CreateSequentialFileSure you can read and write at the same time. But normally you would be reading from one place and writing to another place.
I rather regret avoiding the OP's earlier post asking how to combine two classes. I looked at the two classes posted and realized the best thing to do was actually to break them into more classes. But I also realized it was going to be a big job explaining why and how, and I just don't have the patience for that sort of thing.
So now we have a Big Ball Of Tar™ and I feel partly responsible. -
External hard drive to be read and write for MAC & PC
All,
I recently bought a Mac Book Pro and have always used a PC until now, which i used an external hard drive to use to copy files to. My mac does not let me write to this hard drive.
What do i have to do to be able to read and write to this hard drive on my MAC & PC?your drive is formatted NTFS. OS X can only read but not write to NTFS drives. you can reformat it FAT which is writable from both OS X and windows. (this will wipe the drive of course). However, FAT is an inferior format with a number of limitations. another option is to install macfuse and NTFS-3g on your mac
http://macntfs-3g.blogspot.com/
It will let you write to NTFS formatted drives. -
How to maintain the synchronization between routing and bom in Production V
We are maintaining the Prod version and assigning BOM and Routing to the prod version.
But if user does not assign the mentioned BOM to the respective routing and selects the alternative BOM.
Then how to keep the check the Production Version.
Is any way to keep the Sync between, Prod version and related BOM and Routing.
Amit Shah
Edited by: SAP2511 on Feb 2, 2011 11:56 AMDear,
Go to T.Code: C223 enter your plant and press enter you will get the details of the all production version You will get Green light for correct PV's
Select all PV and do the consistency check.
Regards,
R.Brahmankar -
I am running Firefox 18 on Windows 7, all with latest updates. The Adobe Flash plugin (latest version) hits the disk with hundreds of reads and hundreds of writes each second. This seems to start as soon as cnn.com is loaded then as other sites are loaded it just gets worse. Any thoughts on what might be causing this? Is it normal? If not normal, how can I can stop it?
I do not really have any solid suggestions for this but
* 11.6.602.168 is now the latest version. You were using Flash 11.5 r502 <br />Have you now updated ?
* Hardware acceleration issues are sometimes resolved by upgrading Graphics drivers <br /> [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Flash often causes issues with Firefox. From Flash 11.3 some Windows users were needing to disable Flash's ''protected mode''. Rather a longshot but it may be worth experimenting with the protected mode and trying turning it off.
* http://kb.mozillazine.org/Flash#Flash_Player_11.3_Protected_Mode_-_Windows
Potential workarounds would be
#look at the pageinfo media. Use Ctrl + I -> |Media| to see what is on the pages
# If you do not want that content to play automaticaly consider add-ons like http://noscript.net/ &/or [https://addons.mozilla.org/en-US/firefox/addon/flashblock/ Flashblock] or one of the related addons. -
I am trying to write LabVIEW Variants to long binary fields in a .mdb file using the Database Connectivity Toolset. I get errors when trying to convert the field back to a variant after reading it back from the database.
I next tried flattening the variant before writing it and ultimately wound up doing the following experiments:
1) If I use DB Tools Insert Data to write an ordinary string and read it back using a DB Tools Select Data, the string is converted from ASCII to Unicode.
2) If I use DB Tools Create Parameterized Query to do an INSERT INTO or an UPDATE operation, specifying that the data is BINARY, then read it back using a DB Tools Select Data,
the length of the string is prepended to the string itself as a big-endian four-byte integer.
I can't think of any way to do a parameterized read, although the mechanism exists to return data via parameters.
Presuming that this same problem affects Variants when they are written to the database and read back, I could see why I get an error. At least with flattened strings I have the option of discarding the length bytes from the beginning of the string.
Am I missing something here?David,
You've missed the point. When a data item is flattened to a string, the first four bytes of the string are expected to be the total length of the string in big-endian binary format. What is happening here is that preceding this four-byte length code is another copy of the same four bytes. If an ordinary string, "abcdefg" is used in place of the flattened data item, it will come back as <00><00><00><07>abcdefg. Here I've used to represent a byte in hexadecimal notation. This problem has nothing to do with flattening and unflattening data items. It has only to do with the data channel consisting of writing to and reading from the database.
I am attaching three files that you can use to demonstrate the problem. The VI file c
ontains an explanation of the problem and instructions for installing and operating the demonstration.
Ron Martin
Attachments:
TestLongBinaryFields.vi 132 KB
Sample.UDL 1 KB
Sample.mdb 120 KB
Maybe you are looking for
-
I changed my apple id and password online. The next time I turned on my computer, iCloud popped up asking for a password, but displaying my old apple id. I tried signing in, but I think because it is my old apple id listed it doesnt let me. Anyone
-
Improper Image format after PDF download in OBI 10.1.3.3.2
Hi Guys, I want to display an Image on OBI Dashboard page with a Customer logo along with rest of the Reports embedded in it. 1) I am embedding the image(.bmp image file) using the Image/Link option available in Edit Dashboard 2) I have kept the imag
-
How to uninstall or delete 3rd party app
I installed funambol on my BB 8100. I want to uninstall it but when I go to options > advanced options > applications and then select funambol, there is no delete option... So I tried using the desktop manager, and when I go into Application Loader,
-
Unable to find configuration file: jdk.conf
When i try to use sqldeveloper in lunix show this error Unable to find configuration file: jdk.conf Working directory is /u02/sqldeveloper/jdev/bin Exception in thread "main" java.lang.NoClassDefFoundError: java/lang/StringBuilder at oracle.ide.perfo
-
I`m running Windows Vista, AMD Turion X2 64bit, 4GB RAM, 320GB HDD. Downloaded the installer from the website, placed it in C:\Temp and tried to install. When the installation begins it shows the "Checking System Profile" window, when the progress ba