MIBC - ABC Analysis for Cycle Counting -Report : RMCBIN00
Hi All,
We are trying to have our CC inventory indicators updated by using report RMCBIN00. We noticed that if a have a part with a very high value it is most likely to get indicator A even though the demand for that part is not as high as for a part with a very low price but that we sell thousands. Can some explain how can we use this report in such a way that considers demand? Thanks for your help.
A cycle count indicator A or B or C or D is allocated to material in the material master based on either consumption value (consumption X rate) or forecast value (forecast quantity X rate). You can also specify whether this analysis is to consider only the materials with cycle counting indicator or all materials. The cycle counting indicator in the material master records can be updated automatically by this program.
Similar Messages
-
What does the field Inconsistent mean for ABC Analysis for Cycle Counting report
What does column "Inconsistent" mean for report ABC Analysis for Cycle Counting (T-code MIBC)? The reason I'm asking is because I see TotalStock values greater than 0, but the Accounting 1 view for Material Master and MMBE both show zero stock. I do not understand why TotalStock in the report does not show zero. Can anyone explain how this can happen?
Note: the report is run for consumption/usage date range.
Thank you,
DougHi,
MBEW table and MMBE transaction will show the current stock. When you run MIBC report for consumption, the system considers the consumption for the date range given (from MVER table), which may not be equal to the current stock. Refer the KBA: 1817237 - Stock quantities and stock values in MIBC which explains the system design.
Regards,
AKPT -
Transaction MIBC-- ABC Analysis for Cycle Counting - Physical Inventory
Dear Friends,
Could you please explain me the cycle count indicator relationship to the percentage of inventory to be counted.
When i am using MIBC transaction and changing the Percentages....based on percentages the system is proposing the new cycle count indicators for the materials.
Thanks in advance
SanjayDear Sanjay,
I would recommend you to write your question into the ERP - Logistics Materials Management (MM) topic. I suppose you will get more information about MIBC there.
Regards,
Ely -
ABC analysis for Cycle Counting.
Hi SAP gurus,
I am facing a problem from the user. While doing the ABC analysis for cycle counting using the Transaction MIBC, he is getting an error " table T159c is not maintained for plant XXXX". when i checked it SPRO cycle counting is not done for that particular plant.
My question is : Where do we maintainc CC Physical inv indicator ? I have checked at material level in Gen.Plant/Sloc view, it is not maintained . so may be they have maintained at Plant level. where do we maintain at plant level.?Hi
1) Maintain the Percentages against A,B,C,D cycle counting indicators in OMCO
2) Perform MICN to schedlue the batch input session for Creation of physical Inventory documents
3) MIBC-For ABC analysis for Cycle counting .
Note : the percentages maintained in OMCO will decide on the classification of the material as to when the Physical inventory needs to be done based on either the consumtion values/Requirement values
Regards
Sandeep -
A question about ABC analysis for Cycle counting
Hello expert,
What is RMCBIN00 used for? Currently, user asked me if we can copy RMCBIN00 and perform ABC analysis by quantity? I have no knowledge about it. Can any expert give some clue?
Thanks in advance,
Best Regards, JohnnyHi
RMCBIN00 is a standard ABAP report available within your SAP system (depending on your version and release level). Below is the standard documentation available for this report and a few details of other objects it interacts with such as tables, function modules, includes etc. If you would like to see the full code listing simply enter the object name( RMCBIN00 ) into the relevant SAP transaction such as SE38 or SE80
RMCBIN00 - ABC Analysis of Cycle Counting (Physical Inventory)
PURPOSE
This report runs an analysis for the chosen material types in the cycle counting method of physical inventory.
FEATURES
The analysis takes into account the consumption (usage) or the requirements values of the selected materials for the desired time period. You can decide whether you want to analyze:
Only materials that have a cycle counting indicator
All materials; that is, including materials that have no cycle counting indicator.
Regards
Anand -
ABC-analysis in Open Items report
Good day, dear experts!
I got a task from my chief to find out how to use menu path "Go to - ABC analysis" in Open Items report FBL1N/FBL5N.
Everything I've found is a message "ABC analysis not possible here", Message no. 0K076, and old-old note for this message 414907.
Do someone use ABC-analysis for open items?
I think it's useless, but maybe I don't understand something...
IrinaHi,
Nope, it is useful.
Execute FBL1N and select line items (Edit > Select All).
Then click on any amount column.
Then click on Goto > ABC Analysis
You will get the options to classify the line items in the A, B, C categories based on the % creteria etc. on that screen.
Regards,
Gaurav -
Hi All,
Please let me know the concept of ABC analysis for customer clasification in SAP.
What are all the configuation setting needed for the same?
What is the master data to be maintained?
How to run the ABC analysis for customers? with relevant report(s)?
Relevance of the field "ABC Class" (KNVV-KLABC) in Customer Master(how can it be used for ABC analysis for customers).
Thanks & Regards,
RoushniDear Roushni,
As per my concern there is ABC analysis for material but I don't about Customer ABC analysis.
Plaese got through this SAP help link to know about Material related ABC analysis.
http://help.sap.com/saphelp_47x200/helpdata/en/c1/37613d449a11d188fe0000e8322f96/frameset.htm
I hope it will help you,
Regards,
Murali. -
Hi
We need to implement inventory cycle count report . Is there a standard business content data source for this ?
Thanks and Regards
ArunSorry I never responded. It's really just a matter of what you need to report on. ISEG has all the basic information you need like plant, material, sloc, etc... so the other tables invovled is really a case by case type of thing. I can't think of much else you would really need for generic cycle count reporting.
Also, the previous post is a good method depending on your needs. If showing difference postings and whatnot is suitable, then go with the movement type. But if you need to dig deeper into it by showing system/counted quantities as well as the difference, then the custom extractor would be the way to go. For me, I did inventory accuracy/cycle counting type of reporting that needed to consider the actual quantities, as a difference of 2 units on an inventory of 100,000 units is a lot different that 2 units difference on a balance of 100 units. But that was just my case is all.
Hope this helps.
Thanks -
Add new batch during count entry (for cycle count by quant LICC)
Hi! We are using LICC for cycle counting by quant as we have mixed storage and do not want to count all the materials in a single bin. Most of the materials involved are batch-managed. One issue we have is we may discover other batches during stock take. In this case, how can we add this to the stock adjustment since we cannot add new item when we use cycle counting by quant?
Appreciate your suggestion in this case.
Cheers!
SFHi,
Whenever you find discrappancies, in this case founds, you will note these down and first do an analysis whether this particular batch has been written off in the past as lost. When not, you will make a MB1À or MIGO booking to add this found batch to stock. When yes, you could do a reversal of the issue or do a new receipt.
MdZ -
I need validation code for cycle count open interface
Hi friends i require the validation code for the
cycle count open interface .
can anybody help me .......
Message was edited by:
user506929Hi David
I want to know the procedure for cycle count open interface i.e.
1> How the data from flat file is uploaded in oracle INV
How many Tables are needed?
2>What validations are required ?
3>How these validations are performed ?
If you have any document pls send it to me at :
[email protected]
thanks for ur responce ...... -
How to realize abc analyse for opportunity
hi experts,
i want to build a bex query for abc analyse for opportunities, it should look like this:
opportunity probability category
test1 75% A
test2 30% B
test3 15% C
i dont know how i could realize that, i have checked the document "how to realize abc analyse" but it doesnt help me.
could somebody help me?
thanks in advance
QuanChi,
APD stands for Analysis Process Designer , you can use query results or results from an analysis process for further processing , you could use the data model here too.
check out :
http://help.sap.com/saphelp_nw04/helpdata/en/49/7e960481916448b20134d471d36a6b/frameset.htm
for APD information .. I have assumed though that you are in BW3.5 atleast...
Arun -
Automatic generation of physical Inv. docs. for Cycle Counts
I would like to know if physical inventory documents for cycle counts can be created automatically by SAP. i.e. all A class materials will have physical inventory documents generated automatically after every 3 months. Is this possible?
Many thanks.Technically it is possible to run the creation program scheduled in background.
But not everything what is technically possible makes sense for the business process.
Before you generate inventory documents (it does not matter whether this is anual inventory or Cycle count) you have to make sure that any receipt or goods issue that happened before the count is posted in SAP.
This often can only be achieved by calling the Usual Suspects.
With a good organisation in place this can even be achieved with scheduled jobs, but such good organisations I have not seen often (did I ever?)
Further you might have a kind of misunderstanding. Each cycle count has all due to be counted materials, no matter if the CC indicator is A, B C or D. There is no field in the selection screen to tell SAP to just create inventory documents on A items.
The CC indicator defines how often a material is to be counted, but not when. The when is defined by last inventory, or accounting view creation date. So you should plan to count minimum once in a month, I recommend to do it weekly, but it depends on the number of items you have to count. -
What is T-code to cancel physical inventory document for cycle count MICN?
HI
Please advice me what is T-code and step to cancel physical inventory document for cycle count MICN?
ThanksThere is no way to Cancel the Cycle count document. however you can click on 0 count so that it wont post any new entry on the cycle count.
-
Physical Inventory & Cycle counting report
Hi,
Would like to reports on Physical Inventory & cycle counting.
Also would like to know a comparitive report which should show before & after Physical Inventory alsong with Qty & values per plant & material.
Will be pleased if I could have at IM level & WM level also.
Regards,
VengatHi,
1. You can use T CODE- MI23 -Display Physically inventory data for material.
2. You can use T CODE- MB59 -Give material code/plant code/Mov Type 701-702/Posting period -Execute (F8) >> Click on current display variant button (Ctrl+F) for selection "Amt.in loc.cur".
Thanks & Rgds,
Rajesh -
Dear friends,
Is there any standard SAP Report that gives gives the list of materials for which cycle counting process has been done and the number of times done.
Thanks,
SanjayList of inventory documents - MI20, MI22, MI23, MI24 etc..
Hope this helps-
Maybe you are looking for
-
Playback crashes PP after hardware upgrade
I recently upgraded my editing system to the following: I7 980 hexcore on an ASUS p6x58-e pro motherboard (from 920 quad core on ASUS P6T) 24G memory (Corsair Vengence) EVGA GTX560 video card Existing power supply is Corsair 750W I'm running Win 7 Ul
-
AirPort hardware no longer being recognized! Help!
I know this is something I should just take in to the Genius Bar, but I figured I would see if I can get any answers here first. I use a PowerBook G4 running 10.4.8 (yes, I need to upgrade) and my laptop came with an AirPort card installed. I have ha
-
Is it possible to open several copies of Adobe Digital Editions simultaneously?
Is it possible to open several copies of Adobe Digital Editions simultaneously?
-
Can't keep old data plan?
My daughters droid "smart" phone died so we put her number on an older "dumb" phone we had from previous upgrades until she can afford to buy a new smartphone. While talking to customer service I was told that she can't keep her old unlimited data pl
-
Default zoom setting gone?
Just updated our iWork '09 to the latest version. In Pages 5.0 I haven't been able to find a way to change the default zoom value. In Pages 09' it used to be in Preferences but I can't find it anymore in the new version. I'd like to set it to 150% as