Mic audio problem?

New to the blackberry, but my daughter owned it previously to me. I did a security wipe, and have started up the phone, as well as run most of the tests in blackberry virtual expert. As of now, if I try to make a voice call on the phone, the only way the caller can hear me is if I put the phone on speakerphone. Blackberry Virtual Expert also did not record anything on the mic test, so that test failed, but my voice does go through on speakerphone. Obviously the mic works, but there must me a setting somewhere I'm missing? I really don't want to have to use this phone on speakerphone only.

I called blackberry, & it was still under warranty, fortunately. They sent me most of the phone in the mail minus the faceplate, & requested that I return the malfunctioning part in the box. Then talked me through transferring my info from the old phone to the new one through the computer. All in all, blackberry was very helpful & I am glad to report my unit is working flawlessly. I hope you are able to have the same experience I have had when getting yours fixed.

Similar Messages

HP Pavilion Entertainment PC, model dv2690en; mic audio problem

I am facing problem of mic audio not working due to some internal drive problem. I tried to install the latest drive. Tried to restore the drive programme and could not resolve the problem. Please advise me what I need to do to resolve the mic audio problem.

You can order recovery media here
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00810334&cc=us&lc=en&dlc=en
If HP no longer has Recovery Media for your model, order them here
http://www.computersurgeons.com/Default.aspx

Can't get mic audio into PP CS5.5

I'm trying to get PP to record audio from a mic. Everything is registering input including studio audio monitors and the mac's internal audio meters are bouncing, but nothing is registering in PP. Here is the setup:
Shure SM58 xlr to dbx mic preamp xlr in. dbx xlr out to M-AUDIO Fast Track Pro xlr in.
Fast Track Pro connected to mac pro via USB (directly, no hub)
Studio Monitors are run off Fast Track Pro via 1/4 bal. lines.
Prem. Pro Prefs audio hardware is set to Fast track pro
Prem Pro audio mixer mic enabled on track two.
Everything is registering audio except Prem Pro. the meters are dead.
I was thinking about running unbalanced RCA Red/White audio out from the MA Fast Track Pro to the analog breakout cable inputs on the Mac Pro's internal Black Magic Intensity Pro card and seeing if that would work. Was thinking it had something to do with the Fast Track Pro being connected by USB.
Final Cut Pro 7 registers the mic audio, but it's been End-of-Lifed, so don't want to use it anymore for any new post.
Thanks in advance for any help.
J.

Hey J,
I was wondering what your solution was? I actually just posted a new discusion on the forum about my issue, here it is.
"Hello,
I have been searching for answer for a while and have found none. My Microsoft LifeChat lx-3000 will not work with premiere pro. It does work on the mac, and in Final cut..but final cut is terrible and I would like to record in premier.
Things I have done:
1. gone to premier pro>preferences>audio hardwear
     - In this menu I selected the "Microsoft LifeChat LX-3000" as my default device
     - in the Audio mixer I changed "Audio 3" to "Touch" hit the Microphone button and nothing happened, when I switch the input to "built in" premier recognizes the built in mic and allows me to record using this...but that one sound really bad.
2. I also went to Utilities>Audio Midi Setup
     - here I selected Premeir Pro cs5 and checked the box next to the "Microsoft LifeChat LX-3000" to indicate that Premier would use this device.
     - still does not work, and every time I open the Audio Midi Setup the box next to "microsoft LifeChat LX-3000" is unchecked....not sure why it wont save.
I am at a lose, if anyone has any suggestions or has dealt with this problem i am all ears...if this has already been covered in another thread, point me in the direction!
Thanks for your time everyone!!"
Thanks,
Willis

Mic audio is backwards?

I am at a complete loss. Never had this issue before, but people are telling me all they hear is garbled and backwards speech when I talk. I tried the test call and indeed it does sound backwards. Makes no sense, no one can understand me. I tried other applications and my mic is fine. It's skype. What do I do!??

Roland565 wrote:
got same porblem did you fixed it and how?
It's very possible your audio drivers are lacking or a setting is enabled that is more pronounced in Skype. Try updating your drivers to ensure you are not using outdated or generic Microsoft drivers and that a setting isn't toggled creating the issue. You may find this link helpful:
http://community.skype.com/t5/Windows-desktop-client/Skype-Audio-Problems-Trouble-Shooting/td-p/7376...

Macbook Pro XP Boot Camp Audio Problem

I've got a uni body Macbook Pro running XP with boot camp. Everything has been fine for the last 4 or 5 months I've had it. In the last few weeks though, I've been having really annoying audio problems. The only reason I have it XP even installed is for games (Battlefield 2 and Steam). I'd run skype to talk to a buddy and then play the game. Audio was fine, including the mic.
Lately, skype will just shut down out of no where and give me that error message where it asks you to send a report. Also, the audio in Battlefield 2 will just cut out. I'd still be in the game and connected but there would be no audio, except for the game VOIP. Remember things were working fine for months.
First I tried repairing with the Mac disk, then I tried different Real Tek drivers, then I tried uninstalled and reinstalling the game. None of that worked. Finally, I nuked the partition and did a clean install. The first thing I installed was BF2. Guess what. SAME EXACT PROBLEM. Audio cut out about 10 minutes in. In game VOIP was fine but all other audio was gone.
Does anyone have any suggestions or ideas at ALL? There aren't exactly a bunch of different drivers I can try, and like I said I've already tried reinstalled the drivers from the mac disk. I have no idea what else to do.
tl:dr - new mbp audio worked fine for months, lately audio in games totally cuts out. Tried reinstalled game, drivers, etc, didn't work. Nuked from orbit and did clean bootcamp install of XP. Battlefield 2 has same problem, same with skype. What next?

What anti-virus solution are you running in Windows?
Users have experienced crashes and blue screens of death from Norton products. Norton has resolved these issues in their 2009 product line. I would only recommend Norton 2009 products, Kaspersky, and AVG for anti-virus solutions.
Have you formatted your Windows partition as NTFS, or has it been formatted as Fat 32?
Fat 32 will not handle file sizes of 3.5 GB or larger, and, overall, it seems to always cause issues.
Have you tried a SMC reset?
http://support.apple.com/kb/HT1411
Good luck, and let us know!

Getting Around MPEG Streamclip "No Audio" Problem

(Long post; apologies in advance.)
I needed to get around the MPEG Streamclip "no audio" problem that other people here have had. I just found a workaround that more-or-less works for my specific situation ... and it's free to boot.
Since other people are having this problem, I thought I'd let you know what happened to me, so you can decide if this is something you want to try. If you do, I suggest posting replies here so we all can learn (if that's okay with the board moderators here).
QTAmateur for MacOS X is available at http://www.mikeash.com/software/qtamateur/ . The developer has a somewhat full explanation of what it does at the site, so I won't repeat it here (and I don't get anything for talking about it here; I just want to share the good news).
Right now I'm field recording with a Flip Mino camera (non-HD), which saves video/audio to an AVI file (3ivx MPEG-4, 640x480) at 30 fps, with 44.1 kHz audio (Microsoft ADPCM). Funny thing is the files from my Flip actually imported into FCE without any conversion, but I had to render everything. And the video looked like crap. Hated the rendering and the look, so I searched for other solutions.
After paying for a couple of things that didn't work (lessons learned there), I finally found MPEG Streamclip. Since I'm using Snow Leopard, I sunk the additional $20 into the dang MPEG-2 playback component after my initial export try didn't produce any audio. After the component install, I still didn't have audio. Grrrrr.
So I Googled a bunch of keywords, and I somehow stumbled across this QTA package. Snow Leopard users should note a minor drawback here: QTA needs QuickTime 7, which gets blown away in a Snow Leopard upgrade and is not included in new Macs with Snow Leopard. Users can get off of their Install DVD, though, so it's not a huge deal.
When exporting from QTA, I matched its settings (audio and video) with the ones I found in this document: http://discussions.apple.com/thread.jspa?messageID=12274888&#12274888 . QTA's export interface is actually QT7s, so at least that's familiar.
The only problem I'm having is that even though I set QTA to export at 29.97 fps, the exported files are still at 30 fps. A quick change in FCE upon import is the only thing I needed to use the file without rendering. I also had to change the fps setting on my LiveType files.
The only thing I need to figure out is to how to match up some studio-recorded audio with all of the above, so I don't have to render the studio audio and so it comes out at the equivalent of 30 fps. I think all I need to do is record at 44.1 KHz and I'm okay.
Of course, this is all my experience, and I realize others may not be able to work with this kind of setup. But I think this is an interesting workaround .. I wouldn't really call it a full solution, though, mainly because of the 29.97 fps versus 30 fps aspect.
One other quick thing: I'm not sure if this works without that $20 MPEG-2 playback component from Apple (thanks for that charge, Apple!), since I already had the component installed when I discovered QTA. Someone without the component, though, can download this and see if it works. If it does, then we all know that we don't need to spend the extra $20 for it to work.
If you decide to take the plunge, please let us know here. Thanks for reading.

@Tom and @Meg:
Thanks so much for your replies (speedy, too!). I especially want to thank Meg, who took the time to replicate the problem (which confirms to myself that I'm not nuts ). At least I know I have an ultimate "savior" in QT7 Pro.
Before I spend that final $30, though, I want to see if Tom can help, based on what the QT Inspector says about my .avi files from the Flip. Here's what it says:
VID00001.AVI
Format: Generic MPEG-4, 640 x 480, Millions
Microsoft ADPCM, Mono, 44.100 kHz
FPS: 30
Data Rate: 3408.53 kbits/s
Normal Size: 640 x 480 pixels
Current Size: 640 x 480 pixels (Actual)
(that's word for word, except for the source [file location]; wish I could figure out how to paste in the window from my Grab of it.)
I've already done the exports in the same way Meg indicated in her reply, trying all kinds of combinations. When exporting, though, I've always used DV/DVCPRO w/audio @ uncompressed 48k, and frame size @ 720x480 @ 29.97fps settings (saw those in another post here at the forum). I'm thinking those aren't contributing to my situation.
Whaddya think, Tom?
BTW, the biggest reason why I want to have the audio is to easily sync the audio off the digital recorder (I hook myself up with a lav mic) to the audio coming off of the Flip. I do the ol' "triple clap" trick to sync audio, so that helps -- thank goodness for audio waveforms in FCE.
Once synced, I then delete the Flip audio and move the digital recorder audio up to A1/A2 (although I delete the A2 audio channel). Sounds 1000% better than the Flip audio, as I record outside and the Flip mic picks up wind big-time.
BTW, Tom: I bought your book earlier this week. It's really, really good. You could teach an entire college semester class off of this book, and do it well. I'm getting to more of the lessons this week.

USB audio problems with 2013 iMac

I'm having a strange audio problem with USB microphones and headsets. The issue with my Logitech H650e is shown in this screencast I recorded. In the first part of the screencast, I am not speaking into the mic—yet you can see the levels fluctuating as if there is static playing (not in a natural pattern that you'd see when someone is speaking). In the next part of the video I demonstrate that selecting the built-in iMac mic for input, and then re-selecting the Logitech headset temporarily solves the problem. You can see the input start to fluctuate normally as it should when I am speaking. But at 0:31 in the screencast, you can see the input levels freeze and stop registering anything. I continued to speak until the end of the screencast, but no input was detected. For this screencast, I was on a Go To Webinar call, but the problem occurs regardless of whether I'm using Skype, Go To Webinar, GarageBand or any other software.
The problem with my Blue Yeti USB microphone is also different. In that case, the input does not freeze as it does with the Logitech headset. The levels appear as you would expect, and it seems to work. However, the person on the other end can hear static in the background, even though I don't hear it in my own headphones. I learned this because I just tried to do a Skype interview with the Blue Yeti, and the interviewer told me they could hear static. We closed Skype and called each other back twice, but the problem persisted. Then, suspecting the problem was related to what I described above with the Logitech, I unplugged the Yeti and then plugged it into my Macbook Air 2013 (also running Mavericks). Lo and behold the static completely disappeared.
My Griffin iMic and Audio Technica lavalier mic (attached to the iMic) behaves similarly to the Yeti, except in this case I can hear the static when I speak with my monitoring headphones. The input works but I get a lot of cracking and static in the background. This was confirmed by calling the Skype Test Call number and recording a message, which is then played back.
Here are the facts:
All 3 of my USB audio microphones/headsets do not work with my 2013 iMac running Mavericks
All 3 of these microphones/headsets worked fine with my 2008 Mac Pro running Mountain Lion
All 3 of these microphones/headsets work fine with my 2013 Macbook Air running Mavericks
In this other thread, several people are reporting similar issues with the iMac 2013 and Mavericks. At least two people did not have the issue when the iMac 2013 was running Mountain Lion. This of course suggests the issue is the combination of the iMac 2013 and Mavericks.

Apple>About This Mac>More Info>Service
Please read the warranty paperwork that came w/your computer.
You have 14 days to return the computer w/no questions asked.
You have 90 days of FREE phone tech support on top of your standard 1 year warranty unless you also purchased AppleCare which gives you an additional 2 years of coverage plus FREE phone support.
Strongly suggest that you take FULL advantage of the above before it runs out. Let Apple deal w/the problems.

Outgoing Audio Problems

I have an intell iMac 2.4 GHz, with 4 GB ram. About six months ago I started to have outgoing audio problems. It's an old computer but works pretty well. Well, except for this. It doesn't matter if I use FaceTime, Google Hangout, Skype (video or just audio), the is static and screetchy noises on the receiving end. I can't hear it on my end. There is no problem with incomming audio, either through voice or video chat, or other steaming services. Can anyone help me out. What do you think this is? A simple mic problem?

Had the same problem, no audio on incoming or outgoing calls and only could hear the conversation of the call if I put on speaker. It seemed to start after I did a recent IOS update this past month. I tried restart, reset and restore of my iPhone but nothing changed. It appears not to be a software issue but a hardware problem. I got my phone this past summer so it was still under warranty and got it replaced.

Workaround for some W510 Audio Problems. Lenovo, please take a look at this!

Hi all
I believe most or all of the people are affected with poor sound quality of W510. I do believe there are some people who bring their laptops along and not convenient to get a external sound card and external speakers on the road. I am not too sure, but what I think that causes audio problem in W510, T410 or T510 is due to the implementations of Combo Audio/Mic Jack. So far, I have not heard any audio problems from X201 or W701/W701ds with a separate mic and audio jack (1 green and red, instead of 1 combo) Listed machines are using Conexant 20585 SmartAudio HD Sound Card.
The workaround is to force install Conexant 20561 SmartAudio HD Driver through Device Manager
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-73721
Problem Partially Resolved
1. Using Audio Director - Classic mode enables you to use both internal speakers and external speakers/headphone simultaneously. (By right, this should be in Multi-Stream mode, due to this driver not programmed for W510). However, the volume of the internal speaker will be reduced by half if an external speakers/headphone is plugged.
2. The sound quality is improved (tested with internal speakers).
3. Solved Irregular Volume Problems.
Drawback of using this driver
1. Using Multi-Stream mode in this case would not enables you to use both internal speakers and external speakers/headphone simultaneously. However it would just make your internal speaker to be louder. External speaker/headphone would not work if Multi-Stream mode is selected.
2. Custom EQ is not usable, if used, only the right channel of internal speaker, external speaker/headphone would work, and the sound quality will be like a spoilt radio.
3. Only Voice (VoIP) EQ is optimized for external speaker/headphone. Using Off, Jazz, Dance or Concert EQ would make you feel that the vocal (singer's voice) is diffused, blurred like excessive 3D effects.
4. Even if any preloaded EQ is selected, after system has been restarted, the selected EQ would still be saved, but the band (31Hz - 16KHz would be changed back to Off EQ) It is ok as it just affects the graphics, not the sound.
I know that Forum Administrators, Lenovo Staff, Community Moderators, Gurus and Volunteered Moderators/Users would be surfing around and looking for new post. Please take a look and leave a post or PM to me, thank you very much.
It is alright if Lenovo don't think that there is any problems regarding the sound in W510. However, I do believe most users/owners of W510 would appreciate if the sound system could be further improved through a better driver or new revision of hardware to something like a T400 standards or something. Some users would spent so much $ just to get all-in-a-box solution and would not want to invest further just for a external card to sacrifice portability and use more $. Finally, I still do believe that W510 audio problems can be resolved.
Best Regards
Peter

Hi ckhordiasma
Thanks for reviving ths old thread. How about trying Dolby drivers? It sounds great and could possibly resolve those issues without going through too much troubleshooting.
The link is under my signature.
Hope it helps!
Happy 2012!
Peter
W520 (4284-A99)
Does someone’s post help you? Give them kudos as a reward, as they will do better to improve | Mark it as solved if the solution works for you, so it could be reference for others in the future
=====================================
Sound Enthusiast and Enhancement (Post comments, share mixes, etc.)
http://forums.lenovo.com/t5/General-Discussion/Dolby-Home-Theater-v4-for-most-Lenovo-Laptops/td-p/62...

Audio Problem since upgrading to Mountain Lion

Has anyone encountered audio problems with their iMac? I just upgraded to Mountain Lion on my i7 27" with 16GB of Ram and found that the Audio starts to get distorted and eventually cuts out after about an hour! It starts cutting in and out when I move the mouse and eventually there will be no sound at all!
Sometimes it can take over an hour of steady use, my last time was watching a movie on Netflix. I initially noticed this using a USB DAC Headphone Amp.
I never had any Audio problems before, my machine is over 1 year old.
I enjoy watching movies in iTunes and DVDs, but this is making it difficult! A full restart usually fixes the problem for a time but it will eventually come back
I'm seriously thinking of going back to Lion for the time being and seeing if it is a Hardware problem.

i don't know if mine is the same issue, but i had no sound through any of my applications after upgrading to mountain lion. here is what i had to do to fix it:
-- applications > utilities > audio midi setup > UNmute all options under "built-in output" (they were mysteriously muted)
Also, I noticed that the options for "use this device for sound output" and "play alerts & sound effects through this device" were no longer assigned to my Built-in Output device. They were assigned to some other random sound driver. To fix, i right-clicked on Built-in Output and reassigned those items to my built in speakers. All fixed now!
very weird problem, though.

Can Apple fix the 12 bit audio problem once and for all?

I have had persistent audio problems from I Life V3 all the way up to I Life 06. Sometimes it is synch issues. Sometimes it is audio dropping out. I have been through the various forums and applied the various remedies with some successs, some failure. The basic problem is that I have an extensive quantity of Mini DV tapes dating back to 1997, most recorded with 12 bit sound (prior to 2002). Apple's basic stance has been, you must use 16 bit sound or I Movie and/or I DVD won't work and . And proposes awkward workarounds. Basically placing the onus on it's own consumers. Why can't 12 bit sound support be included in I DVD 06 and these persistent audio issues put to rest once and for all? Is there some overwhelming technical reason why it cannot be done?

I don't know about overwhelming, but the DVD specification (which was not developed by Apple) calls for the audio to be sampled at 16-bit/48KHz (I think you might also be able to use 96KHz as well). This is what the software expects. If you choose to use another sample rate then the software may or may not be able to "fix" it in post. The real problem is that many camcorder manufactures set the audio to 12-bit by default.
Mike

HOW TO FIX NO AUDIO PROBLEM IN FLASH (4 SOLUTIONS)

This solution is for WINDOWS ONLY!!! Unfortunately I believe
it is a bug in flash itself as I have read more than one instance
of this same no audio problem occuring on MAC'S and LINUX based
systems as well. IF YOU KNOW OF SOLUTIONS TO THE MAC OR LINUX BASED
PROBLEMS, PLEASE POST THEM IN THIS THREAD.
Description of the problem: Video sites such as YouTube,
VideoSift, Break, Google Videos, Yahoo, and a plethora of others do
not stream embedded audio. Viewing a YouTube video, for example, on
VideoSift.com results in the video playing back with no audio.
However, by going directly to YouTube and playing back the same
video, it appears to work.
THERE ARE SEVERAL POSSIBLE SOLUTIONS.
Problem: You may be missing your WAVEMAPPER driver.
Cause: Wavemapper driver was removed during installation or
updating of the Flash Player. It might not necessarily be Flash
that removes it but apparently something does.
Solution #1: Google "Flash No Audio WAVEMAPPER" for
directions, its been covered a bunch, but basically requires
running REGEDIT and readding the WAVEMAPPER key to the appropriate
location and value in the registry. Its not as difficult as it
sounds.
http://weyland.be/wrdprss/index.php/2006/08/22/no-sound-in-macromedia-flash-player-9/
if your wavemapper key is installed correctly...
Possible Cause: Corrupted or damaged flash content preventing
audio streaming from working correctly.
Soltuion #2: Run CC Cleaner and delete only cached Flash
content. It is a free program, again just google "download CC
Cleaner". This particular solution worked for me.
If CC Cleaner also does not work, the description of your
problem may differ slightly. In my case on several computers, one
day it worked, the next day it didnt. If it never worked, this
would be a logical solution for you. One variation of this that I
have found is to create a new Windows User Account and log into it.
The reason the CC Cleaner method may work better is that the User
Accounts have their own separate cache folders so a corrupted cache
preventing audio playback on one profile will not be available on
the other User Account to cause the same problem. I wont explain
how to do this as the CC Cleaner will work better but if you are
curious, yet again google "create new windows user accounts". I
have also seen this method work on one of my affected computers but
it did not fix the issue on the account I was having problems with.
http://www.ccleaner.com Install
and run it, use it only to remove Flash under the Applications Tab,
Multimedia, Adobe Flash Player. Check it and uncheck everything
else, then hit Analyze then Run Cleaner.
Possible Cause: Missing Codec
Solution #2: Download and install the K-Lite Codec pack.
Again, google it. A CODEC stands for COmpressor DECompressor and is
a way to make audio and video files small enough to be transferred
on the internet. There are a lot of different codecs and if you
want to play back a video that was compressed using a particular
codec, you will need that same corresponding codec to decompress
your media source and view its content. Basically if you dont have
a codec, you cant observe the content of the media. If you have a
VCR and want to play back a DVD, you are out of luck unless you get
a DVD Player. DivX and XVid Codecs are some of the very popular
codecs used on the net, but to get those, I still suggest getting
the K-Lite Codec Pack.
http://www.free-codecs.com/download/K_Lite_Codec_Pack.htm
Solution #4: Go back to Flash 7. If it aint broke dont fix
it. This Final alternative is only to be used as a last resort.
You'll have to get rid of Flash 9 and go back to Flash 7. The
really tricky part here is that you have to prevent Flash from auto
updating itself. If you install Flash 7, and hit up YouTube, you'll
immediately get Flash 9+ installed again with the same problems. So
AFTER you uninstall Flash 9 (use Macromedias / Adobes uninstaller,
yet again go google it) make a new text file and name it MMS.CFG,
in the file put this one line "AutoUpdateDisable=1" (without the
quotes) and put it in BOTH your c:\windows\system32 AND
c:\windows\system32\Macromed\Flash folders. This will prevent flash
from Auto Updating to 9+, then have to find some place to download
the old flash 7 installer. I found one here.
http://www.intercomm.com/downloads/Flash7.
Only problem is that most sites will try to make you install Flash
9 and Flash 7 does not work on all sites, but it does on some like
YouTube. DO NOT UPDATE TO FLASH 9+ IF YOU USE THIS METHOD.
You will probably want to IMMEDIATELY go to
http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager05.htm l
after installing Flash 7 and UNCHECK the update feature
I've tried to write this quick little guide at 3AM so Im not
going to take more time to research other ways to fix this problem.
If you have other solutions, such as for MAC and LINUX, or feel
like adding on to something else that I've written here (links
would be useful to the downloads I suggested) or correcting any
mistakes I probably have made, please say so.
One of these solutions is bound to help you. Theres multiple
causes for this no audio problem so there is obviously multiple
fixes.

http://www.omahapokernews.org
http://www.holdempokernews.org
http://www.7cardstudplay.net
http://www.5cardstudplay.net
http://www.holdemspot.org
http://www.texasholdemstate.net
http://www.texasholdemstate.com
http://www.pokerbonuslist.net
http://www.pokerdownloadz.org
http://www.signuppoker.net
http://www.tournamentpokerz.com
http://www.pokercalculatorz.com
http://www.omahaodds.org
http://www.omahaouts.org
http://www.texasholdemrulesonline.net
http://www.onlineholdemtips.com
http://www.pokerhilo.net
http://www.poker-hilo.com
http://www.hilopokers.com
http://www.nolimit-holdempoker.net
http://www.texasholdemlimits.org
http://www.texasholdemlimits.net
http://www.onlinepokerlimits.org
http://www.onlinepokerlimits.net
http://www.onlinepokerlimits.com
http://www.texasholdemlimits.com
http://www.7cardplayer.net
http://www.5cardplayer.net
http://www.omahaacademy.org
http://www.omahapokerrooms.net
http://www.onlinepokerroomstop.net
http://www.playpoker-toppokerrooms.com
http://www.texasholdemz.com
http://www.playpokeronline-casinos.com
http://www.texasholdem-vip.com
http://www.gamble-poker-holdem.com
http://www.playpoker-holdem.com
http://www.onlinetexasholdem-poker.com
http://www.texasholdempokeracademy.com
http://www.vip-texasholdem.com
http://www.playfree-poker-online.com
http://www.texasholdem-pokerrooms.org
http://www.toppokerrooms.ws
http://www.toppokercasino.ws
http://www.onlinepokercasino.ws
http://www.playpoker-online.ws
http://www.online-texasholdem.ws
http://www.play-texas-holdem.ws
http://www.internet-texas-holdem-poker.ws
http://www.poker-player.ws
http://www.luckyschool.com

VGA problem with FiFA 2003 and Audio Problem with NHL2003

i use onboard VGA
800 x600for both games
with no problem
but for Fifa 2003
the screen looks so dark...
all players look like a black people(all black color hair
and black face))
some audio problem with NHL 2003...

Have you tried the following?
Adjust monitor settings? i.e. contrast/brightness
Video settings within the game? Some have gamma or brightness settings.
Gamma correction in "Display Properties"?
for starters anyway......

Audio Problems in Adobe Presenter: Help Needed Urgently!!

I am using trial versions of Adobe Presenter 7 and Adobe Connect 8.
I created a presentation in in Powerpoint 2002 and published through Adobe Presenter to Adobe Connect Pro. This presentation has voice over recorded through the Adobe Presenter "record audio" option.
In Adobe Connect Pro, I created a meeting and shared the above mentioned presentation through the "Share Document" option in Connect Pro.
Now, when I play the presentation in this Adobe Connect Meeting, I am not getting any audio that was recorded in Adobe Presenter. Whereas if I play the published presentation directly it plays the recorded audio.
Can anyone help me on this?
1. Are there any settings to be done in Powerpoint or Adobe Presenter or Connect pro?
2. Is it the problem of Trial Account or something like that?
Please let me know the solution. Need to work on this ASAP!!!
Thanks in Advance,
Yogini

This is a weird one. If you created a prezo with audio and published it to AC (Adobe Connect) and everything worked fine on your desktop then it should work fine in AC i.e. there are no other settings required on AC's side, it should just play.
As I am typing this I thought of similar audio problems that we have experienced in the past. A big one would be where another user created a PPT on their laptops and handed it to us. When testing the audio did not work. Reason being is that not all the files were coppied over BUT I must accept that this is not your problem as it definately worked on your PC before you published it to AC.
Wait there is one setting in the publish settings. In the output options tick "Upload source presentation with assests", then tick audio.
I cannot think of anything else. There is a man called Heyward Drummond on the Adobe Connect General forum, who is a real master at answering queries like this. Why not post your query there and see if he comes up with an answer?

Audio Problems when burning

I have tried making disc image, burning disc and the audio will pause for second several times in the play back. It does not do it when playing back in iDVD.
The slide show was started in iPhoto and sent to iDVD. I have started over several times and still same issue. Makes a bad impression and is really not useable for presentation.
I have 30 gigs free space, changed settings to Professional encoding and still same issue. I have no open apps, changed all energy settings and screen saver to never.
Any ideas, I am fresh out, never had this problem with previous version.
Frustrated

Andy,
This question is really in the wrong place - this is the iDVD '08 forum and not the iDVD 5 forum.
From the description of your problem using Toast, it sounds like you didn't actually export a DV video movie out of iMovie.
Export a DV video movie out of iMovie (it will run 13 GB per hour) and play it back with the QuickTime Player to see if the audio settings you made are really there. If this movie plays OK, you can bring IT into iDVD or Toast for turning it into a DVD.
If the DV video movie you created STILL has audio problems in the QuickTime Player, ask you question about THAT issue in the correct iMovie forum.
F Shippey

Mic audio problem?

Similar Messages

Maybe you are looking for