Microphone Fix! For those who can't seem to get it working with CL Drivers or YouP-

Hi Guys,?I'm currently using the U-Pax mod and it's brilliant, thanks so much for sharing this neat bunch of software. By the way, many of you might have encountered their mics not working with the Creative X-Fi drivers (and consequently also not on?U-Pax drivers)?on Vista and I found a neat way to get it working - very quickly too. All you have to do it simply disable the mic in the sound settings, then enable it again. Voila! The microphone picks up sound. I have the detailed instructions below:?Control Panel --> Sound --> Click the Recording Tab --> Right Button Click the Microphone --> Click Disable --> Right button click again ---> Ensure "Showed Disabled Devices is ticked ---> Right button click "Microphone" ---> Click "Enable"?This should do the trick! Let me know if any of you have problems with this. -MoT|oN FX

Well, the microphone is working now truly, but only theoretically. Practically it'ss unbearably quiet (even if you enable +20 db boost and level is 00). The same mic with simple Realtek HDA embedded in my motherboard works fine. (I?m using X-Fi Fidelty Pro on Vista Ultimate)

Similar Messages

  • For Those Who Can't Boot After Upgrading To 10.5.6

    For Those Who Can't Boot After Upgrading To 10.5.6
    (and i am one of those)
    how is Apple supposed to make them able to install future fixes and updates
    once they finally acknowledge and address this horrible bug?
    will they send free bootable CDs with the updates to 10.5.6?

    What "Boot ROM version" do you have (check in the system profiler under "Hardware")? If it's not MBP31.0070.B07 or MBP21.00A5.B08, then you will need to update your MacBook Pro's firmware. To do this, you might need to connect an external display and mouse/keyboard, and then run the computer with the lid closed to bypass the laptop's monitor. Then apply the firmware patch and reboot the system. This might also be doable via "Screen Sharing" if you have that enabled and have another mac handy.
    The firmware update is here: http://www.apple.com/downloads/macosx/apple/firmware_hardware/macbookproefifirmw areupdate151.html
    Message was edited by: Topher Kessler

  • I have recently purchased a new Logitech Webcam and can't seem to get it working on the site that I

    I recently purchased a new Logitech Webcam and can't get it working on the site that I use. I can see myself on the small screen but can't get it to transmit to the person I am camming with. Can someone help me with this, it is very frustrating to say the least, I have tried everything I know how to do.
                                                                             Thank You

    I used to use Internet Explorer, but can't get on it now so I use Google Chrome.
                                Thank You: Donald Smith
    Mike M <[email protected]> wrote:
    Mike M http://forums.adobe.com/people/C+F+McBlob created the discussion
    "Re: I have recently purchased a new Logitech Webcam and can't seem to get it working on the site that I"
    To view the discussion, visit: http://forums.adobe.com/message/6318810#6318810

  • HT1752 Hi, I want to play my music through my Comp as well as my wireless speaker.. i can only seem to get one working at a time, is it possible to get both working at the same time??  Thanks Kylie

    Hi, I want to play my music through my Comp as well as my wireless speaker.. i can only seem to get one working at a time, is it possible to get both working at the same time??  Thanks Kylie

    Hi Kylie,
    Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there.

  • Q. for those who hit their iPod to make it work again

    I gave it a good pimp slap to the back and got it working again and I am glad about that. However, I am concerned that the problem will come back.
    My question is...
    How long has your iPod been functioning since you hit it and if it stopped working how much longer did it last for?
    How many times have you hit it again to get it working again?
    What causes the HDD to get stuck time and time again?
    Is there a more permanent fix that us customers can perform?

    Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
    Last Resort Level
    1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
    In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
    http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
    2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
    http://discussions.apple.com/thread.jspa?messageID=2438774#2438774

  • Is there anyone who can recommend a network Camera that works with OS X10.9

    I just upgraded to Mavericks and love the OS.  I just updated my printer to an HP that is compatible with Macericks and it works wonderfully!  Now I am looking to add a network camera that allows multi camera viewing and can be viewed on my Iphone or Ipad or Macbook, etc.  Anyone have any thoughts or suggestions on what to try.  All the major brands that have high ratings are compatible with 10.6 or 10.7, but I see no mention of 10.9 - any suggestions would be great!

    For what it's worth, I purchased the Axis 207W. Indeed it worked with Safari via Bonjour.
    The setup took a while to figure out, but wasn't any more difficult than setting up a wireless router.
    With things set properly I can view the camera from anywhere on the Internet and get e-mails sent when motion is detected by the camera.
    All this and it works well with my Apple set up (laptops and Airports).

  • A Suggestion For Those Who Can't Install Flash

    Check out Microsoft Silverlight. I just came across it on the web. It downloads in minutes and it runs without problems. It play videos just like Flash and it is free. I am not familiar enough to say that it is a better player. It seems to be at least equivalent. The was only one notable difference: Installing flash, two weeks and counting. Installing Microsoft Silverlight, about five minutes.
    If only I had found out sooner my garden would not be so overgrown in weeds.

    Are you saying that youb can play Flash objects with Silverlight?

  • For those who can't hear their fans...

    This is pretty much my experience and you could follow my original posts if you care. I'm just going to break it down.
    1st MBP - Week 12 build 2.16 1g 7200 which had to be returned because of the 4SN error message during hardware check. With this MBP I never heard my fans rev up no matter how hard I pushed the machine or how uncomfortably hot it got. Also, I noticed that the error would occur whenever the fans didn't turn on during the system test. This was during the week of April 1st. Went to the store and they kindly swapped the machine.
    2nd MBP - Week 12 build 2.16 1g 7200 which also had to be returned. This one also had the 4SN error message during the hardware check and I never heard the fans rev up no matter how hard I pushed the machine. I went to the store to return the machine and I was told by a genius that the error is just a software glitch and as long as the machine is working properly then I shouldn't worry. I wasn't happy, but I needed the MBP and decided that I would hold on to it. After a few weeks I noticed the machine slowing down (marginally) and I occasionally had this issue where my screen would go all glitchy and the computer would freeze. This worried me and I returned to the apple store for it to be sent out for repairs. After explaining my problems (strange HD noise, screen flicker) and showing them a pic of the screen issue he the genius said my graphics card is fried and surprisingly, he wanted to swap the machine again (it was 20 days past the return policy date)! That was very nice of them, but I had to settle for a lower model.
    3rd MBP - Week 17 build 2.16 1g 5400 which is running great. I had to settle for the 5400 model because apparently, the 7200 model is no longer an option at the store (you can get it on line). This was fine with me because they returned $400 to me due to the lower model and the genius made good points of battery life and heat. Also made me feel better about the whole 17" vs. 15" top model price point. Anyways, on to the fans. I actually hear them rev up at appropriate times and I never recive the 4SN error message.
    What does this mean? Well, it's all speculation but, from my experiance you should hear your fans rev up when the computer is being taxed. With each of the 3 machines I did all the same processes and with the first 2 I never heard the fans. I did not keep the first one long enough to notice any process degradation and I'm not saying that there would have been one. As for the second MBP, I did notice degradation and throughout the weeks of owning that machine never once heard the fans rev up. I have had my third MBP for 2 weeks now and the heat is much better and I do hear the fans rev up occasionally.
    Anyways, I love the new machine and I hope this helps people understand, a little more, about the fans/4SN error issues.

    Yes I still have the whine, but I need to put my head to the keyboard to hear it.

  • HT1349 MY IPHONE 4 THAT IS ONE MONTH OLD IS SENDING MULTIPLE REPEAT TEXT MESSAGES AND EVERYONE I KNOW IS ANNOYED WITH ME, IVE READ THIS IS AN ONGOING PROBLEM, DOES ANYONE KNOW IF THAT IS TRUE OR IF THERE IS A WAY TO FIX IT? I CAN NOT SEEM TO GET AN ANSWER

    My iphone 4 is about a month old ad it continues to send multiple repeat texts message to the point where I have stop sending texts because everyone is annoyed with me, is there a solution that anyone knows of? I am hearing from sprint that it is apple's issue and from apple it is a sprint issue. They said I can take it to the store but its one month old and I find it hard to beleive that they do not have an easier solutions, i dont have time to or the patience to give up my phone for three days. This can't be right correct? If anyone has founf a solution I would really appreciate some help as Im sure you can hear I am frustrated.
    thank you

    It is a sprint issue and other carriers have that same problem. I get multiple copies of texts from other carriers all the time to my iphone. It isn't the iphone, it is the carrier sending the text message several times because they haven't received and ack message from the recepient.

  • My iPod sync's for hours but can't seem to get past the second song of 1221.

    I have reset it to factory settngs but still no better.

    Sounds like the song in question has something wrong with it? Can you uncheck it so it will not sync and see if the sync goes through?
    If all is well you need to replace that track either from the CD you ripped it from or redownload from the itunes store at no extra cost. If sync then stops at another place then repeat the above until you have identified all your faulty tracks.
    Itunes Store Select Purchased from the Quick Links Section. Navigate to the track in question, click on the cloud icon to redownload it.

  • Who can I contact about getting some help with this ongoing (several months) issue???

    I will try to make a long story at least somewhat shorter.Comcast customer for 20 years (yes - literally 20 uninterrupted years). 8 years of service at current address.Several months ago I restructure my bill - all my promotions etc had run out and I wanted to reduce my bill.  Ended up being told my customer support that I could save money by getting the "Triple Play" (I've NEVER had comcast phone service, I have my own VOIP phone solution).  They told me I didn't have to "use" the phone, just getting it hooked up would save me money.  Fine.Internet service was not supposed to have been touched / changed at all. A few days after making these changes, a large box from Comcast shows up at the house.  It has TWO cable modems in the box.  Not sure why they sent them - I already had the latest cable modem (that was capable of supporting the phone service they needed to activate). Notified comcast about the shipment.  They said don't worry about it.  Okay, I left them in the box. Tech shows up at house while I'm working.  Wife called and I talked to tech. He said he just needed to get some "numbers" off the modem to activate the phone service (I'm in the IT industry - I will assume he wanted MAC / SN#'s).  I made sure he was making no changes to the modem itself - I've got my own home network setup.  The Comcast cable modem serves as a gateway and it's in bridged mode.  Always has been. I have my own router etc. So a week or so after that visit, the modem started losing connectivity.  It happens almost EVERY DAY and it's almost always in the later afternoon (5:30-7pm EST) and sometimes late at night.  When this happens, the ONLY way to get the connection back is to unplug modem power AND the coax cable input.  It will then restart the modem and it comes back.  Simply unplugging power and restarting will not do it. After multiple hours spent with support on the phone (we activated the newest modem they sent - same issue.  Activated the other modem they sent - same issue.  In fact they weren't able to put one of them in bridged mode at all). They said a tech needed to come out. Tech comes out - checks the feed to the house.  Said there is a lot of noise in the lines.  (Please note that there is one main comcast feed to my house - it splits outside (in the comcast locked box) into two feeds which enter the house. One feed splits and runs the upstairs TV's (Digital Adapters) and the downstairs STB / DVR.  The other feed goes DIRECTLY to my cable modem. I ran those feeds myself when I moved in this house.  Never had an issue before. Cable TV never has issue - only internet.   So the tech replaced some ends on the upstairs line (Cable TV - he said that signal noise could cause issues with the internet).  I then helped the tech run a BRAND NEW line from the split at the comcast box, directly to the modem.  He said the signal / noise looked much better. Next day - same ISSUE - modem dropped connection.  Pull power and coax cable, reseat, modem restarts, signal comes back. I called support again.  They gave me an incident #.  Said they would have a "Crew supervisor" contact me, since it's obvious the problem lies outside of my home. A tech called and left a voice mail on my phone (was working when it came in, couldn't answer).  They did not leave a call back number. Called support again.  They told me a tech would call me back and was advised to leave a call back number.  That was MONDAY of last week.  Haven't heard anything.  The contact # is my cell...no missed calls. Is there another number I can call or email address so I can escalate this issue?  Having to disconnect / reconnect the modem EVERY DAY at least once is getting tiresome.   I'm in the Richmond Virginia area if it matters at all. Thanks.

    ctandc-
    I am so sorry for the delay! I am sending you a private message so that we can discuss your billing concerns more freely.
    At the top of each Forum page, you will see a small gray envelope icon. This icon will have a number next to it if you have any new messages waiting. To open a PM to read it, double click on the envelope. If you click on the white envelope a window will open with tabs for your Private Message Inbox, Sent Messages, Friends, Ignored Users, and Compose new Message. You can also access this area by clicking on the Username in a Thread or post. By default, Private Messages are enabled. You can disable this feature in My Settings>Preferences> Private Messenger.

  • HT201365 I have brought a second hand phone and cant activate it because i can not seem to get in contact with the previous owner.

    I sold my iphone 4s and added some money to buy a second hand Iphone 5, i can't get into the phone because i need the previous owners apple Id and password and theres absolutely no way I can cintact the previous owner because i had thier number on my iphone 4s which was sold before i brought the 5.

    Only the previous owner can unlock your phone, either by providing you with the code or by removing it from his liste of devices. I'm afraid that if you cannot contact him your phone is useless.

  • Can't seem to get airport working in the 10.4 environment

    HI all,
    I recently purchased a 867 512 MB titanium and restored it with the original OS that came with it: 10.2.1. I, also installed an original airport card and am able to connect to the network, but after updating to OS 10.4, I have "no bar" strength. It seems to recognize that the card is there but it acts though it's turned off as indicated in the "get info"-Network-Airport Card information:
    Current Wireless Network: airport card is turned off
    But it is not turned off as when I click on the "bar strength" icon at the top of the desktop menu, the option to turn it off is highlighted.
    Is there an issue with Airport with OS 10.4 and the Titanium? I'd like to have my titanium on the latest software updates, etc. BTW, I also installed Ilife 05. Could this have anything to do with the problem? I doubt it. It's probably OS related.
    Thanks in advance.

    Resolved. I did a erase option as opposed to the update to tiger. This seemed to do the trick. My airport is aok.

  • I keep getting emails for another user; can't seem to contact Apple support about this

    Hi there,
    I keep receiving emails for someone called Amanda to my email address.  These are not spam emails; it seems like someone called Amanda is signing up to reputable websites using my email address.  So far, Pinterest, Educreations and a women's magazine have sent me emails to confirm my membership.  There doesn't seem to be anything suspect going on: they're all respectable websites, and they're always addressed to Amanda.  I was also receiving confidential emails from a legitimate business with invoices etc. a while back.
    I'm confused as to what would be the cause and/or point of this.  It seems like a very benign way to spam/scam somebody.  Is it possible (I feel ridiculous even asking this) that emails can become crossed like telephones?  I know, I know, it's a stupid question.
    I'd like to contact Apple Support about this, but I seem to be going round in circles on the website.  Unless I have AppleCare (mine is expired) I can't seem to get in contact with anyone.  Can anyone help me or point me in the right direction?
    Thanks!

    You can contact iTunes support here : http://www.apple.com/support/itunes/contact/ - click on Express Lane, then iTunes > iTunes Store

  • I am using an iPad and iPhone and have exchange as my email. Both will only collect mails when I am in the wifi of the office, and not when I am out and about. I can't seem to get a fix for it.

    I am using an iPad and iPhone and have exchange as my email. Both will only collect mails when I am in the wifi of the office, and not when I am out and about. I can't seem to get a fix for it.

    This - https://support.mozilla.org/en-US/kb/how-make-web-links-open-firefox-default - didn't work?

Maybe you are looking for

  • Unable to log and capture HD from HVR-25J

    Hi Does anyone know why I am not able to capture 1080i50 material from HVR-25J to the FCP 5 running in MAC PRO 3.0GHZ. The setup i have in the HVR is: i link set to HDV (i link off). video out is 1080i50 i link is connected to fire wire in mac and i

  • How to go to a particular object in drill down detail pdf report?

    In drill down html reports I could directly go to a particular object in the detail report from the summary report by using hyperlink destination property in the detail report and hyperlink property in the summary report. How can I do the same thing

  • Installing CAD 7.5(8) on Windows 7

    I'm trying to install CAD 7.5(8) on Windows 7.  This version is supposed to be compatible with Windows 7.  However, when I try to install I get the following error: File 'sllapi.dll' can not be found.  Make sure the file is on target system or instal

  • Can't see RAW images in Preview of Nikon D80

    When I connect camera, Import window shows icons of images on camera. Jpgs are visible as photographs; Raw images are just icon placeholders. How can I see which Raw images to import?

  • Problems in Win-10 Apps, Services Wi-Fi etc.

    1) Glitches in Wi-Fi connectivity. Wi-Fi loses connectivity any time. We have to switch off & on Wi-Fi again to connect to internet 2) Start Menu view of 8.1 seems better. 3) Older application compatibility is better, few of the old application are r