Middleware ECC / CRM

Hi,
I have one doubt, i´ve downloaded some best practices teaching how to configure middleware to synchronize business partners between ECC and CRM, and one of the steps is permit  customizing on the client, but this client is not suppose to be customized.
After i setup the things it´s necessary it still allowing customization?
During the setup i´ve activated the following settings:
    - Automatic recording of changes
    - Changes to Repository and cross-client Customizing allowed
    - eCATT and CATT allowed
Thanks,
Edu

Hi Edu,
The best practice guide talks about the dev. system where actually you need to do the customization and then transport it to QA & Prod.
So in transaction SCC4 you should have the following entries in QA & Prod:
1> No changes Allowed
2> No Changes to Repository and cross-client Customizing Objects
3> eCATT and CATT allowed
With this entries your system will be locked for the customizing.
<b>Reward points if my post helps!!</b>
Best regards,
Vikash.

Similar Messages

  • SAP Cloud for Customer & SAP ECC/CRM OnPremise integration using WebServices!

    Hello All,
    I would like to ask if anyone has really created a working integration scenario between a Cloud Solution & an ECC/CRM OnPremise solution?
    We are trying to build some prototypes for this, however, due to connectivity errors/issues, unable to proceed.
    I'm looking for information on:
    > What certificates precisely are needed on both Cloud & OnPrem systems?
    > What configuration if any is required on Cloud & OnPrem solution, except for communication system/arrangements on Cloud solution?
    > Any use case if available from anyone which can demo integration between Cloud solution & ECC/CRM OnPremise solution.
    I'd really appreciate responses on this.
    Many Thanks
    Ankur

    Thanks Sathya for the response.
    https://scn.sap.com/community/cloud/blog/2013/10/10/new-e-learning-for-i
    ntegration-of-sap-cloud-for-customer-with-sap-erp-and-sa
    p-crm-now-available  : Not working! => Please check & confirm.
    Just to give you our background...we are SAP Cloud Partners & VARs, hence we are building few prototypes for Customer Demos & POC.
    Per my understanding, its just one of the OnPrem system, either an ECC OnPrem or CRM OnPrem that you can integrate with one C4C tenant at a time, i.e. to one single tenant. In our case, we are trying to integrate ECC OnPrem with C4C system.
    We are in the process of deploying SAP PI as the middleware platform for integration between C4C & ECC/CRM OnPrem., which is going to take few more weeks.
    SAP HCI will be the other approach, but we are currently not familiar with that, hence we have a trial to start in coming week for SAP HCI, so this is going to take some time as well.
    Hence, WebService is the only currently available option for us to build these prototypes, POC for Customer Demos, to show working integration scenarios between ECC OnPrem & C4C system.
    We have been facing some technical issues after setting up necessary communication systems/arrangements on C4C system & trying to do a WS call from SDK also we get error when we do a ping test from within C4C system to check connection.
    Has SAP developed any WS integration between C4C & either of the ECC or CRM OnPrem system? Or is it just PI & HCI which SAP has for integration?
    I'd truly appreciate if you can guide us on creating few integration scenarios (Working ones of course ) using Webservice between C4C & ECC OnPrem system.
    Many Thanks
    Ankur

  • Is it possible to maintain customers in both ECC & CRM?

    Hi,
    We have ECC 6.0 as the leading system for creating customers and they replicate to CRM 5.0
    But one certain group of customers alone will be created in CRM and replicated to ECC. These customers then have to be maintained in ECC and those changes have to flowback to CRM. I am guessing this is available in the standard functionality of SAP ECC & CRM (creating in one system and maintaining in another). Will there be any issues in doing this?
    Can you guys foresee any problems in this method?
    Thanks,
    Max

    Hi,
    As long as the Number range used in both system is the same, there should be no problem in doing so....
    Sharif

  • SAP RAR - Best Practice ECC,CRM and BW systems

    Hi All
    i have the requirement to configure RAR for the systems ECC,CRM and BW systems . Each system has only one client . whats the best practice regarding using the rules against each system . i am assuming the rules will be the same irrespective of the system but when i see the names of the initial files , they are system specific . can anybody elloborate around this . thanks
    Regards
    Prasad

    Prasad,
    To build on Chinmaya's explanation, make sure you use a logical system for CRM, BI, and ECC for the basis portion of the rule set (and only the basis portion).  This will keep you from duplicating your rules to meet your basis requirements.  The other rules should be attributed to the individual systems (or additional logical systems if including mult landscapes, ex. Dev, QA, and Prod ECC merged into one ECC logical system).

  • Contact Person - Mapping ECC-CRM

    Hello,
    Please suggest best practices of creating contact persons in CRM
    Our scenario is existing customers and contact persons would be uploaded in ECC which need to be replicated in CRM
    All new customers and contact persons would be entered in CRM only post golive.
    User have multiple contact persons with different addresses for every corporate account in CRM
    Thanks,
    Satish

    Hello ,
    PIDE settings in ECC:
    CRM--> ECC : B(Classification) - Z001 Ext Account Group of ECC
    ECC-->CRM : 0001 Account Group - B(Classification) - 0001 - Ext No Range (ECC)
                          Z001 Account Group - B(Classification) -0002 - Int No Range (CRM)
    Please suggest how to maintain Account group and number ranges for contact persons in ECC and CRM and PIDE settings for the contact person.
    which classification need to be used in PIDE
    Thanks,
    Satish

  • Bex transaction to ECC/CRM screen

    Hi
    We have a unique requirement of trigerring a ECC/CRM transaction screen from Bex report when the user clicks on context menu or a key field. Ex BP Number.
    We are using ECC 6.0 and CRM 5.0
    Any sugesstion ideas on how to go about doing it.
    Thanks

    Hi,
    you already posted this question. you shouldn't post multiple times..
    regards,
    Diego

  • Bex to ECC/CRM via key field

    Hi
    We have a unique requirement of trigerring a ECC/CRM transaction screen from Bex report when the user clicks on context menu or a key field. Ex BP Number.
    We are using ECC 6.0 and CRM 5.0
    Any sugesstion ideas on how to go about doing it.
    Thanks

    Hi,
    You can use Report-Report Interface to do something like that. It's not exactly like that, the user would need to right click and select an option from the context menu. But the result is the same.
    Check transaction RSBBS.
    Hope this helps.
    Regards,
    Diego

  • Changing existing Oracle licences on all existing systems (ECC;CRM;PI,BI) with HANNA(and use HANNA DB)

    Hello
    Maybe not the best section ..
    But we have in mind changing existing Oracle licences on all existing systems (ECC;CRM;PI,BI) with HANNA(and use HANNA DB)..
    I wander what would be pro and what cons?
    Thank you a lot
    Jan

    Hi Jan,
    If I understand correctly you are going to perform database migration activity in your present landscape. Firstly you have to contact SAP as well as one of the third party hardware vendor (who is going to provide certified HANA hardware). SAP will provide you all the license details.
    For whole your migration activity below link will be helpful:-
    SAP BW on HANA Cookbook
    Migration to HANA made easy with DMO
    Regards,
    Rafikul

  • ECC CRM Integration Guidelines

    Hi,
    Could you please help me with ECC CRM Integration/ Replication steps.
    We are on ECC6.0 and CRM5.0 systems.
    Points will be awarded.
    Prachi Shah

    Hi Prachi,
    The replication guide for CRM and ECC can be found at the following link
    http://help.sap.com/bp_crmv250/CRM_DE/index.htm
    The docs are
    1. B09: CRM Customizing Replication
    2. C03: CRM Master and Transaction Data Replication
    The docs for connectivity are
    1. B01: CRM Generation
    2. C71: CRM Connectivity
    Hope this would help.
    Regards,
    Rekha Dadwal
    <b>You gain a point for every point that you reward. So reward helpful answers generously</b>

  • Middleware on CRM 7.0 for ERP and CRM sales integration

    Hi all,
    i am involved in a CRM upgrade project in order to repleace the client current release with CRM 7.0.
    currently, my client handles sales integration between ERP and CRM using middleware fucntion and in particular SCENARIO A that allows to create sales orders both in the CRM system and in the R/3 system and to change them mutually in both systems.
    my question is: new release 7.0 covers all those included functionalities by default without implementing this scenario? If yes, how and what exactly.
    thank you in advance and i am looking forward your feed-back
    cheers, lucia

    Hi Christophe
    this can be done. You can call MDM web services for either doing a Free form search or even run a MDM matching strategy to find potential duplicates defined based on rules in MDM.
    In one of our projects we have used Web services call from CRM ecommerce portal to MDM for doing a Customer search.
    Thanks-Ravi

  • Errors while transaction download from ECC- CRM

    we are trying to download transactions from ECC 5.0 to CRM 5.0.
    the initial download has stopped in between and we get an error "SysFail" in the Inbound queue (SMQ2). Information on this error is "The current application triggered a termination with a short dump"
    when we try to analyze the short dump, it says the termination occured in the ABAP program :SAPLCRM_DOWNLOAD_MAP - in "FILL_BTM_PARTNER". In the source code you have the termination point in line 254  of the include program "LCRM_DOWNLOAD_MAPF37".
    please provide pointers to resolve this issue .
    thanks
    RH

    following is the place where the error is being triggered in the program, any suggestions?
    Information on where terminated                                                                   |
    Termination occurred in the ABAP program "SAPLCRM_DOWNLOAD_MAP" - in                         
    "FILL_BTM_PARTNER".                                                                          |
    The main program was "SAPMSSY1 ".                                                             |
    In the source code you have the termination point in line 254  of the (Include) program "LCRM_DOWNLOAD_MAPF37
    Source Code Extract                                                                               
    Line
    SourceCde
    number_int = <ls_bapisdpart>-itm_number.                                |
      if sy-subrc eq 0.                                                                     |
    ls_btm_partner-ref_guid = ls_item_keys-guid.                                        |
    ls_btm_partner-ref_kind = gc_object_ref_kind-orderadm_i.                            |
    endif.                                                                                |
    endif.                                                                                |
    *orderadm_h_guid
    ls_btm_partner-orderadm_h_guid = ls_orderadm_h-orderadm_h_guid.                         |
    *bp_partner_guid                                                                          |
    if lv_nrart = gc_partner_r3_types-customer.                                             |
    *-----AG, WE, RE, RG, etc.                                                                  |
      call function 'CRM_BUPA_MAP_CUSTOMER_TO_BP'                                           |
    exporting                                                                           |
    iv_customer       = <ls_bapisdpart>-customer                                      |
          importing                                                                           |
    ev_partner        = ls_btm_partner-bp_partner_guid                                |
    exceptions                                                                          |
    partner_not_found = 1                                                             |
    others            = 2.                                                            |
    if sy-subrc eq 0.                                                                     |
    display_type                                                                             |
    s_btm_partner-display_type =                                                       |
                           gc_partner_no_type-business_partner_no.                             |
    no_type                                                                                |
    ls_btm_partner-no_type =                                                            |
    gc_partner_no_type-business_partner_no.                              |
         else.                                                                                |
    if ls_btm_partner-partner_fct = '00000001'.                                         |
    >>>>>
    message x020(crm_order_misc) with gv_logsys_r3.
    endif.                                                                              |
       endif.                                                                                |
      if ls_btm_partner-task     eq gc_bdoc_task-delete and                                 |
      ls_btm_partner-ref_kind eq gc_object_ref_kind-orderadm_i.                          |
    special handling for deleting item partner. In this case the item                         |
    partner must not be deleted but updated with the header partner                           |
      insert ls_orderadm_h-orderadm_h_guid into table lt_header_guid.                     |
    insert gc_object_name-partner into table lt_requested_objects.                      |
    call function 'CRM_ORDER_READ'                                                      |
    exporting                                                                         |
      it_header_guid       = lt_header_guid                                           |
    iv_only_spec_items   = true                                                     |
    it_requested_objects = lt_requested_objects                                     |
    importing                                                                         |
    et_partner           = lt_partner_header                                        |
    exceptions                                                                        |
    others               = 1.                                                       |

  • Performance problem ECC /  CRM WebUi

    I have a performance problem when using CRM functionality FCC (a http i.e. bsp) aplication which makes a query in ECC system.(two systems are in different networks)
    In real life user is waiting for response in CRM BSP like 60 seconds(really too much)
    At CRM side:
    When I look at CRM for overall dialog avg. response time is 806 ms with avg roll wait time is 436ms.
    When I look at CRM for overall HTTP avg. response time is 244 ms with avg roll wait time is 194ms.
    At ECC side:avg RFC(only there I can identify specified user with high times) response  time for user is 7.577ms with a quite high DB avg response time 6310ms.
    Generaly this is a big ECC system with avg dialog response time 612ms(and no other user complains)
    How to improove this situation. Is the problem in ECC system ,CRM system or network? Would moving CRM system in ECC  network improove performance dramatically or something else.
    Should you need any other info do not hesitate

    Thank you  Juan
    I wander do we neeed some more data to find main cause for performance problems.
    I can organise moving CRM to ECC network(this engages many people of three company and downtime).
    However if this does not bring significant improovment I will be "killled".
    What to check to see main cause for performance problems

  • Partner function AP is not def in partner procedure in ECC - CRM complaint

    Hi,
    There is an error occured while creating credit memo request from the service complaint in the CRM. It is not stopping the process but it happens several times. The error message is always in the document but not able to fix it. There is no partner function called AP in both CRM and ECC but how come the system is looking for this new partner function in the partner determiination procedure in ECC. The detail error message as below
    An error has occurred in the system RP9CLNT020 while copying the document
    Message no. CRM_ORDER_MISC 020
    Diagnosis
    Errors have occurred while transferring the document into another system. Refer to the enclosed log to view the error messages.
    Transmission log
    Partner function AP is not defined in partner procedure ZUK () (Notification E VPD 003)
    ORDER_HEADER_IN has been processed successfully (Notification S V4 233)
    ITEM_IN has been processed successfully (Notification S V4 233)
    Sales document 0350002869 was not changed (Notification E V4 219)
    Any clue in fixing this issue will be great.
    Regards,
    Ram.

    Hi,
    There is no problem in creating credit memo in ECC even with these error message.  the credit memo document is created in ECC. Actually thiis is not happening for all the complaint documents in CRM. It happens only for few customers/complaints.
    My doubt is with contact person mismatch in crm and ecc, but that is also perfect. pls let me know solution for this issue.
    Regards,
    Ram.

  • Delta Replication for Customizing object from ECC- CRM

    I need help on delta replication activate for customizing objects from ECC to CRM.  I finished with initial load with product replication and everything worked weel. The problem is that product hierarchy continuely changing in ECC everyday, so the delta for the products error out due to incorrect product heirarchy in CRM becuase the delta is not working for DNL_CUST_PROD0, and DNL_CUST_PROD1. Please show me how to activate the delta for those DNL.  What business transaction do I need for those so the delta will work for them too?  Rewards points if helpful

    I think you need to do Request downlaod for the Product Hirearchy when ever there is new one created in ECC.You can do request downlaod by creating the object using R3AR2. Exeute the object though R3AR4 and monitor the status using R3AR3.

  • Issue of Hierarchy when Replicating Materials ECC- CRM

    Hello,
    We are replicating materials from SAP ECC to SAP CRM, the material got replicated successfully however when I check the material in SAP CRM, the wrong hierarchy is getting assigned to the same(screen shot attached the hierarchy R3PRODSTYP gets assigned however the hierarchy R3PRODHIER needs to get assigned
    Please advice, Product Hierarchies have been downloaded in SAP CRM using the relevant middle ware objects

    I am attaching the screen shot below
    An Earlier material got downloaded in the system correctly containing all 3 categories(screen shot attached below)
    Kind Regards
    Atul

Maybe you are looking for