Midi Channels

I am failry new to the world of midi and I have just found out that midi has 16 seperate channels. Does Motion 2 support switching midi channels. I have tried and have not had any luck, I was thinking there my be a setting I am missing. My parameters are filling up my keyboard and I would like to start programing some into the other channels.

Similar Messages

How Can I separate my MIDI Channels with layered instruments in MainStage 2 With my Axiom 61?

I have been at it for 3 days straight. I want to play an internal instrument (EVB3 for example) and trigger samples with the EXS24 without triggering notes from the other instrument. I have my keyboard set to MIy help meDI channel 1 and my drum pads set to MIDI channel 10. The still play together. I've tried changing MIDI input on both channel strips to multitimbral, Channel 1 for the keyboard and channel 10 for the drum pads. Still playing together. I've tried changing attributes in the Mapping screen. Still...
I don't think its the Axiom. I've tried changing MIDI CC numbers but then it won't talk to either instrument. I'm currently using MIDI cables into a 3rd generation M-Box. I've tried using USB as well. Please, somebody help me!!

Sorry for the late responce, I've been in program mode and haven't had a chance to come back to this.
I figured it out. It was an option that I had over looked in the Assignments & Mapping tab in Edit Mode. At the bottom of the window that says All Devices. In that menu there is another tab that says Channel 1-16. If you click where it says Unassigned, down in the Screen Control Inspector there is a checked box that says "Send unassigned MIDI to all Channel Strips". If you uncheck that box then everything works perfectly. It is a little extra work having to assign the keyboard everytime you ad a channel strip but when you have to do some serious programming it's worth it.
Anyone who needs to program with multiple devices should uncheck this right out of the gate. It will save you from pulling your hair out.
Thank you Bruno for your help. It is much appreciated.

How can I manually enter MIDI channel number in Control Surface expert Value Change field?

I am creating a software interface for a multidimensional controller which can transmit many linear values at the same time. I can not use Learn mode because it always sends data from all sources, but I can split them by MIDI channels. I would like to manually enter controlling values into Control Surface expert view.
I seem to be able only to input the message, but not MIDI channel on which it is transmitted.

Stupid me, it's hex... so 80 is Note Off ch 1, 90 Note On ch 1 etc

Connecting kurzweil sp88 to GB I want to connect my Kurzweil sp88 to GB. The Kurzweil has a baffling array of buttons and possible MIDI channels. It also has the old style MIDI plug ins. I've got the MIDI out connected to my MacBook Pro via USB adapter.

I have my Kurzweil connected to my MacBook Pro via an adapter (old style MIDI from Kurzweil to USB adapter connecting to Mac). The Kurzweil has a baffling array of buttons and possible MIDI channels. Can anyone please tell me which of the channels I should use? Also, should I leave the MIDI In cable out of the Kurzweil? Thanks for as detailed an answer as possible. If you like you can respond directly to me at [email protected]

First of all I do not own this keyboard. But a quick look at the manual (found on the internet) says that when first powered up the SP88 is in Internal Sounds mode. Meaning you hear the sounds selected when playing the keyboard. It also stated that the default Midi Transmit Channel is Midi Channel #1.
Looks like you would need to go to the SP88 Keyboard's MIDI SETUP and simply select LOCAL OFF. Now the keyboard should be ready to transmit Midi Out only and no internal sounds should be heard.
Next you may or may not need to do this but you might need to go into the Utilities Folder found in your Applications Folder on your Mac and double click AUDIO MIDI SETUP the keyboard Icon. Figure #1 below.
Next you need to make a physical connection from the Midi Out of the SP88 to the Midi In on your Midi Interface. Figure #3 below. You may need to Click on Add Device first. Figure #2 below.
In the examples shown below I have a Yamaha Electronic Drum Kit that is Midi Out only... not USB out. I had to plug a Midi cable from the Midi Out Port on the back of my Drum Module to the Midi In Port on the back of my Motu 828 Audio Inferface which is connected to my Mac. Next I created the Audio Interface and Drum Module "Devices" as mentioned above.
I then double clicked on the Drum Module and made my Midi Out Selections. Figure #4 Below. And once it was setup and the icons closed I used my mouse to draw a virtual cable connection from the Drum Module Out to the Audio Interface In. Figure #3 below. This is how I got my Midi Devices to talk to one another.
Once you have made your setup as I have outlined create a MIDI Instrument Track in Garageband, select an instrument for example a Piano then Record Enable that track in Garageband and see if you now hear what you are playing. In this example the SP88 is a Midi Controller only and you will only hear sounds selected in Garageband which is what you want.
Keep in midi your setup may be different than mine. You can keep your SP88 Keyboard on the default Midi Channel #1. That would be a good place to start. Garageband receives Midi on all channels.

Multitimbral Instrument Plugins (ie 1 instument many midi channels)

I am using SampleTank and Kontakt and they way I use them just does not seem right ! The problem starts here..
- when I add Kontakt to a Instrument Strip the Midi channel is assigned in the strip in the environment window.
- If I create multiple tracks with the same Instrument and change the midi channel of a track they all change - Doh... not very logical.
The only work around to this that I have found is to create multiple instrument stips on env window and assign them all to the same instrument (ie instrument 1).... then give each a serperate midi channel - this creates lots of channels with the same audi meters bobbing up and down.
Sure I can use multiple instances of the same plugin (as with EXS24) but that is not very memory or processor effecient...
Now I know I can create Aux Channels and route channels to each - but you get in a "too many channels" mess !
So am I missing something is there an easy & logical way to put an instrument on a channel and route multiple midi tracks to it ?
Did I explain the problem clearly ? Any help/advice/guidance very welcome !
Cheers
Ian

Hello !
You have to go in the environment page, instruments, and create a new multi instrument, which you will name Kontakt for instance. Activate all channels by ticking each check box in the instrument icon in the environment page. Then open another environment page where you will choose to see the Audio objects, I.E. the mixer in that case. Drag a cable from you newly created multi instrument to the channel strip containing your Kontakt sampler. You get then a message saying that the ports are in use, do you want to change the assignment, and you answer YES. Now in the arrangement page, set midi channel of Kontakt to All. Now you can create Midi tracks for each midi channel. Multiple outputs are either managed inside the sampler itself or using the Multiple Output version of the plugin, depending of which plugin model.
Hope this helps

Help! I can't get Mainstage (2 or 3) to map patches to different midi channels

I recently upgraded to Mainstage 3, partly in the hope that I could solve this problem I've had.
So, I use an M-Audio Axiom Pro 61 and I want to have 2 channel strips on 1 patch: an organ sound controlled by the keyboard and some drum samples controlled by the drum pads.
In layout mode, I've set the keyboard to Channel 1 & the Drum pads to Channel 10 and in edit mode I've set each channel strips' midi input to the appropriate multitimbral settings.
When I play the drum pads I only get drums - so that's working fine - but when I play the keyboard it triggers both channels, and no amount of tweaking has got me round this issue.
I've tried to go into the Axiom Pro settings and change stuff there but haven't had much luck (though i'm not as well learned with the inner settings of the keyboard so I wonder whether there's something I can do there)
Can anyone help? I really want to multitask!
Thanks

For this scenario, you add 2 MIDI actvity or keyboards to your workspace. Name one "Organ" abd the other one "Drums" and assign both to your Axiom, but set the MIDI channel for the "Organ" to 1 and for the "Drums" to 10. Here's where the splitting by MIDI channel happens.
Now, switch from Layout to Edit mode and set the MIDI input of the organ channel strip to Keyboard "Organ" and the MIDI input of the drum channel strip to Keybaods "Drums". The Multitimbral setting in that section converts the MIDI events from the Keyboard objects and if the instrument reacts to all channels, it won't make a difference. This is meant for some AUs, that support Multitimbrality, like NIs Kontakt or the Apple's Vintage B3, that can make different sounds for upper, lower and pedal manuals.
Small re-cap: If you need to split by MIDI channels, you need to do this in Layout mode by adding objects, that react to a specific MIDI channel only.
Hope this helps!
DaCaptain

Can't get sound from my midi channels

Hello. I've been using Logic 8 for a while. 2 days ago I updated to the newest version 8.0.1 and after I did it, I can't get sound from my midi channels. Before the update I could use my Ivory pianos perfectly, but after the update I can't. I've tried every setup I can imagine. I've been here sitting for hours trying to fix it but I can't .
Logic recognizes my keyboard, since I play...all the notes appear on the transport bar, but i can't get sound from any sampler (Ivory, EXS, EVP88, etc).
I've checked my outputs, etc...but nothing.
Please help me!!! I'm desperate!
Thanks

Do you hear the Audio tracks and only Software Instruments are not working od don't you get any output at all? I was just assuming that through the update your Apogee has been removed as your Audio device in Preferences->Audio->devices.

Playing Multiple Midi Channels on GarageBand

I'm planning live performances, but being unable afford Ableton, am using GarageBand. I'm getting two Akai LPD8s for thse perofrmances, but I want to use them to play two midi channels at once (e.g: one playing Synth and the other playing Drums.) Is this feature actually available in GarageBand?

Ashyashcroft wrote:
I'm getting two Akai LPD8s for thse perofrmances, but I want to use them to play two midi channels at once
unfortiunately GB only offers a single MIDI track at a time

How to record multiple midi channel data to multiple midi tracks in Logic?

Dear All,
I have an electric organ from Yamaha, and it has 3 keyboards, upper keyboard, lower keyboard, and pedal keyboard. They are all running in different midi channels:
i.e. upper keyboard: midi channel 1
lower keyboard: midi channel 2
pedal keyboard: midi channel 3
When I try to create 3 midi tracks in Logic to listen to the 3 keyboards, I found that their midi signal just mixed together. Meaning, all 3 midi tracks can listen to all 3 keyboards...
Please noted that I am using a single USB Midi interface (1-in, 1-out) to connect the electric organ with macbook.
Can someone give me a help here? I suppose I can setup 3 midi tracks in logic to listen to 3 keyboards signal separately.
Thanks,
Eric

Ahrenshof wrote:
I had a similar situation when I first got LS and received this useful reply from Apple-
in Settings>Recording, check the box for "Auto demix by channel if multitrack recording".
Be aware that the Settings are song specific, compared to Preferences, which apply
to all songs. Set your controllers to send on specific MIDI channels and set the same channels in the inspector of your tracks.
I have a 2x2 midisport however, so I don't know if you will have an issue because you have only 1 I/O.
If so, you might have to learn about 'Multi instruments", I haven't had the need.
Yes, this is correct. We have two recording stations with ESI M4U 4x4 midi interfaces. We are recording 4 instruments at the same time and they all send their data on a different channel. I created midi instruments for all of them in Environment just to have them more easily available in the Arrange window. Also make sure you have the correct midi channel set per track in Logic.
When the option to "auto demix by channel" is set and you are recording, it may seem that Logic is recording only on one channel (only one region being created). But as soon as you hit stop, it will expand to multiple channels.

Multiple midi channels in one region

Hello,
I've been using Logic since version 4.7, but haven't tried the following in a version newer than 5.5.1. Not sure what functionality might have changed, so here goes...
I'm having issues with having notes with different midi channel assignments in a single region. I have 3 audio instrumets on midi channel one, two, and three, respectively. I have a midi instrument whose midi channel is set to all, that is patched to all three audio instruments in the environment. The track containing my region is playing back on the midi instrument, not the individual audio instruments. I have assigned channels 1, 2, and 3 to individual notes in the region, yet when it plays, all 3 audio instruments are triggered for every note rather than only the instrument whose midi channel matches the note's channel.
Thanks in advance,
JG

Thanks for the responses! The issue is that the three audio instrument objects in the environment are not respecting it's assigned midi channel. Yes, the channel splitter will split the incoming midi channel, but I shouldn't have to use the splitter if I set the midi channel on instrument 1's parameters pane to channel 1, and if the the midi channel is set to channel 2 on audio instrument 2 ect. So in the above example, no matter how how many different events I send on different midi channels to audio instrument 1, audio instrument 1 should only respond to midi channel 1. However it responds to all midi channels. Again, the channel IS NOT SET TO ALL.
So here's a simple test:
-Instantiate Logic's EFM1 on audio instrument 1
-Set audio instrument 1's midi channel in the parameters pane to midi channel 4
-Create a blank midi region with the pencil tool on audio instruments 1's track in the arrange window
-Open up the blank region in the matrix editor
-With the pencil tool, create a few notes.
-Then open up the same region in the event list editor and make sure that all the notes are on a midi channel other that channel 4.
-Play back the region and EFM1 will play back not respecting it's channel assignment!
Hope this clears some stuff up.

How to play multiple instruments simultaneously on different MIDI channels?

I'm very new (today!) to Mainstage and I have a Yamaha HX-3 organ with three keyboards (Upper - Channel 1, Lower - Channel 2, Pedalboard - Channel 3). I'd like to play all three channels live simultaneously with a different instrument on each one (ie. Piano, Organ and Bass) but I can't figure out how to do this.
I've managed to setup a concert with all three keyboards on different MIDI channels with three different instruments but I can only play one of the keyboards at a time. The other two show MIDI keyboard activity but no sound...HELP!
I also have Native Instruments Komplete 7 if that would help in this regard (I know the Hammond organ sound in Komplete lets me play all three keyboards at the same time).
Thanks,
Don Thompson.

First create 3 keyboards in Layout mode and assign each to its own MIDI channel (I think you may have done this already). Then, create three channel strips, either at the Concert, Set, or Patch level with the three sounds you want to use. Each Channel Strip can be assigned to a different keyboard from your layout. To do this, go to Edit mode, select a Channel Strip, and look at its attributes in the pane below your layout. I don't have MS in front of me but there should be a dropdown list with the keyboards that you have in your layout. Just pick the right one for each strip and you should be good to go.

[ReWire] How to use Logic's MIDI channels only

Sorry for the rather vague subject title, but I can't come up with a better one.
Let me explain the situation:
I'm working on a project with several audio and MIDI tracks and also two ReWired Reason4 instruments, all routed to their corresponding Reason device. (the MIDI information is coming out of Logic and being routed to Reason and the audio is then routed back into Logic)
My problem is with Logic's own MIDI channels. When I record enable one of these (Logic) channels and I play my MIDI keyboard, Reason also responds to that and plays one of the instruments.
So I hear the Logic instrument as well as the Reason instrument. To put it in the easiest way possible, I don't want that.
Is there a way to make Logic stop sending out MIDI information to it's ReWire slave, when a non-rewire channel is record enabled?
Thanks in advance for your help

Hmm that makes perfectly sense... that I haven't thought of that myself
I will try tonight. Thanks!

Sending stompbox state to midi channel

Hello all,
I would like to send the status of a Logic Stompbox to an external midi processor to control an external midi stompbox. Basically, is there a way to send a midi value from a Logic effect? I know the other way around is possible. I use it constantly. But I would like to know if an effect was changed within Logic by receiving a midi signal.
Thanks.

Hi
Rawbear wrote:
Bi-directional is no problem, since I have developped the pedal board and the integrated micro-controller can be programmed to treat any incoming signal, midi or other.
Great!
2 ways you could do this that I can think of right now:
A) Setup some switch buttons in Layout mode, or use the ones pre-mapped such as in the guitar template. Learn them to the incoming MIDI CC messages from your pedal controller, and *crucially*, in Layout Mode choose the correct MIDI port and channel in the "Send Value to" drop down in the Hardware Input Inspector.
This should 're-send' the current state of the on-screen buttons if you change Mainstage patches.
B) In Edit Mode, add an External MIDI channel strip at the appropriate level, assigned to the MIDI footpedals channel and port. (You could select 'No Output" for the audio 'return').
For each on-screen switch, select the switch and add an second parameter mapping in the Screen Control Inspector, select the Ext (Pedal) channel strip in the Left Hand column, and then select the appropriate MIDI CC message. You may need to un-check the "Momentary Behaviour" checkbox at the bottom right.
HTH
CCT

How do you change the midi channels of a region?

Lets say i have a region recorded on midi channel 1, how do I change the notes to be midi channel 2? Thanks

Depends.
First of all, are you talking about a MIDI region or an Audio region (Audio regions can "be on a MIDI channel", so to speak, if they contain controllers, i.e., volume, pan, etc.).
So let's say you're talking about MIDI regions for now.
The first order of business is to recognize that the actual channel of the MIDI events contained in the region is determined primarily by the MIDI channel that your controller is sending on. For simplicity sake, let's say your controller sends on channel 1, and the track you're recording on is set to play MySynth on channel 1.
If you're wanting to change the channel from 1 to 2, chances are you want to do this to assign this part to play a different sound on a multi-timbral synth. Let's say that the MySynth object -- as seen in the Environment -- is indeed a multi-timbral synth. If the synth selected for that track is currently assigned to play MySynth 1 (i.e., channel 1), just change it to MySynth 2 (from the track's menu).
Now, if you opened the Event Editor, you'd see that the channel of the MIDI data is still on channel 1! This is normal. Logic is able to "channelize" the data when you select a destination instrument that is on a different MIDI channel from the one that the data was recorded on. So if your track is now set to play MySynth 2, you can go into the Event Editor all day and change the MIDI channel of the data, but it will still be channelized to channel 2 because that track is assigned to play MySynth on channel 2.
There are many many reasons why you might still want to change the MIDI channel of the data in the Event Editor despite the channelizing that goes on. But without going into a whole shpiel about these kinds of applications, just know that the primary way to change the MIDI channel is to select an instrument on the desired MIDI channel.

One track-16 midi channels - how to unify?

Hi Forum
A specifik problem have occured for me.
I use in one track a multiinstrument with EWQLSO/KONTAKT as an host.
If i want in The Event list to specify a range of notes to a specifik/Same MIDI channel
and the MIDInotes that I want to change have diffent channels I presumme a
transform parameter could do that.
But how to ?
yours
Bo Lundby-Jaeger
yours in advance
Bo Lundby Jaeger
QUAD 4 X 2,5 GHz G5
4.5 GB DDR2 SDram
MacOSX 10.4.10
MOTU 896HD
Samsung ML-1720
Brother DCP-4020c
programs and hardware
Logic pro 7.2.0
Motu 896 HD

Can you describe your requirements a bit more fully?
I think using the Functions/Transform/Demix command to separate the track into individual MIDI channels would be the easiest option, then he could used the merge command to put them back together.
pancenter-
p.s.
I originally was going to post the solution below, until
I reread the question.
I think he wants to change specific notes (ie: D#) across multiple MIDI channels.
He must have the AU MIDI channel set to "All" and changed MIDI transmission channels on his controller so he ends up with a multi channel track.
If that's it, the easiest way is to use the Matrix editor piano keyboard to select the note (it selects all channels) and then double click on a selected note to open the event editor which will have the all of the correct notes selected.
--------------------------------------------------------

Change MIDI Channel - I'm doing something wrong

Hey everybody,
I'm trying to sequence a string quartet with Kontakt Player running Garritan Personal Orchestra. I've done this many times by creating multiple tracks in the arrange window, assigning them to the instrument, and changing the MIDI channel for each of the tracks. For some reason tonight, when I change the MIDI channel on one of them, The MIDI channel changes for all the tracks of that instrument in the arrange window, thereby making all the tracks play the same instrument in my multi Garritan.
I even looked at another session that has the exact setup I want to use, and it looks identical. I have to admit the environment window has always seemed like advanced algebra to me, so I'm unable to glean a lot of information from it. But I've never had this problem before. It's always been so easy.
Any ideas?
Scott

Sorry about this post -- wrong Discussion -- will repost in Logic Express 8 -- can't figure out how to delete it.

Midi Channels

Similar Messages

Maybe you are looking for