MII 12.1 time out for JCo Connection

I'm running this MII transaction that, is using a JCO connection to run a Function Module in SAP.
The problem we have is, that function module takes more than 60 seconds to run an return the values, that is correct because we are gathering a big amount of data, so if we run the function Module inside SAP it works ok, BUT, if we run the transaction from MII we receive a time out after exactly 60
seconds.
We have already modified several time out parameters inside MII
but those changes are not making any difference.
Do you know where that JCo time out parameter is inside MII 12.1?

Hi Salvador,
Try to increase the session timeout to 300 in SAP Menu --> System Properties. Initial it will be 60 sec only.
And increase MII workbench Read Timeout as well. Help --> Setting --> Read Timeout
If it doesn't solved your problem, go through below post
How to set timeout for each level in MII?
Regards,
Praveen Reddy

Similar Messages

Set time out for single webservice in NWDS 2004s

hai,
i created webservices for session bean.created webservices are consumed by webdynpro client.
when the webdynpro client consuming it.if the response takes more than 60 sec the webservices are timed out so i want to set the time out for my webservice.
how can i set the time out (more 60 sec)for my webserive(for one service)?
thanks in advance.
Edited by: lakshman balanagu on Jun 24, 2008 11:20 AM

Hi
Try out this thing: I am not sure as I have not done this.
Go to this link: http://<server>:<j2ee port>/nwa --> System Management --> Overview --> Configuration
Application Resouce ( Select your resource from the list)
Check for "Connection Pooling".
Here you can check different options.

Can the time out for loading a page be extended for busy sites?

(Error:)
Problem loading page
The connection has timed out
The server at xxx.xxx is taking too long to respond.
* The site could be temporarily unavailable or too busy. Try again in a few moments.
Question: Is there a way to extend the time out for sites which are known to be busy?

This issue appears under two different Mozzila "Questions". Both appear to have the same OUTDATED, INEFFECTIVE ANSWERS. A lot of us are on WIN7 now and still have erratic network speeds due to cable multiplexing -- but have been trained to leave the registry alone. Has not anyone solved this problem -- other than going notoriously unreliable FIOS ??

Is it possible to increase user exit time out for a partcular user

Dear Sir/madam,
Is it possible to increase the User Time Out for a Particular user ?
We do it through RZ10 and as per I know when it is changed, it is effected to all the users.
Pls advice.
Thanks,
Pranab

Hi Pranab,
Not possible for a single user.
Regards
Ashok Dalai

Where can i find .properties file for jco connection?

For jco connection to SAP, we need .properties file. Is this file already contained in Exchange Profile or somewhere??
If yes, where can i find .properties file for jco connection or what is the path to this file?
OR, do we have to create manually??
Any help is appreciated.
Thanks.
Karma

Hi Karma,
Please take a look at these..
Where to set up the JCO connection?
http://help.sap.com/saphelp_nw04/helpdata/en/bc/42e13d82fcfb34e10000000a114084/frameset.htm
http://help.sap.com/saphelp_webas620/helpdata/en/bc/42e13d82fcfb34e10000000a114084/content.htm
cheers,
Prashanth

Change password for JCO connections

Hi,
In our landscape we have around 80-100 applications running and there are 300-400 JCO connections on an average. We have 4 servers like this. Earlier we used to have developers user id and password for JCO connections. Now we have decided to have a universal userid and password for all the JCo connections. My question is there any way by which we can change the passwords for all the JCO connections without going to each one of them individually as it is a hectic task.
Thanks & Regards,
Vijith

Hi Vijith Kumar,
Look at the following blog:
/people/anilkumar.vippagunta2/blog/2007/02/06/dynamic-jco-creation
I guess that if you can create JCO by code you can also edit it...
Regards,
Omri

504 PROXY TIME OUT. The connection time out

Hi
one of our users is facing 504 proxy time out. The connection time out
using our ITS link. what would be the possible solutions to reduce this kind of error.
Regards
MA.Sreenivasan

Hello,
If only a particular user is facing this problem, check with the user on what she/he is doing.
if everyone is facing, have a look at ITS timeout parameters.
~rfcTimeOut
~userTimeout
Regards,
Siddhesh

Setting time outs for a secure connection

I am researching on setting up a secure application incorporating two authentication
mechanisms:
a) Mutual Authentication to verify certificates
b) RDBMS Security Realm to validate username/password combinations
I desire a time out to take place after an hour of dormant time passes on the
connection forcing the user to re-authenticate. Any suggestions on how to configure
such behavior? I have been digging around the documentation for a while now and
I have not found anything specific controlling this time out duration.
Thanks for the help.
-cb

http://www.bulletsandbones.com/GB/GBFAQ.html#exportexactlength

How to Increase Time-out for Agent Manager in OLT?

Hello All,
When using the Oracle Load Testing Agent Manager for a load test of multiple scripts, I often get time-outs at the start of a test from OLT:
"Error communicating with.... : timed out after 60 seconds".
When I check the agentmanager.log file on the remote PC (Win XP SP2) I can see that the communcation started with the last line saying
"connected to server=......yaddayadda.... queue=queue/AgentPoolNotificationQueue"
which I assume means there was communication. And there were 2 attempts to start. After the first attempt, the entry:
05:31:09,513 WARN [AgentProcess] Forcibly terminating process 8041484 for agent agId1530_rndd49ae6b9-a8ec-4a0d-920d-16ee6c7021f4
The agentmanager_auth.log file show 2 lines near the start time of the test:
2010-05-12 05:30:18,606 INFO [URL:t3://..........au:8088;Requestor Username: oats;Requestor Key:f6272e33-9428-425b-b52d-c0363f863e43;Requestor Queue:queue/AgentPoolNotificationQueue;Request ID:36;Request:startagent;] - authentication successful
2010-05-12 05:31:09,513 INFO [URL:t3://..........au:8088;Requestor Username: oats;Requestor Key:f6272e33-9428-425b-b52d-c0363f863e43;Requestor Queue:queue/AgentPoolNotificationQueue;Request ID:42;Request:stopagent;] - authentication successful
Why was there a 'stopagent'?
The log from a successful agent show lines after the "Connected to server...." line ( "startAgent( pathTo.....a.. Launching agent.... Launched process 8792944 for agaent agId.....") so something appears to have not happened on the failed agents.
When starting a test immediately (rather than scheduling it as I want to for off-peak times) and the agents time out, I can stop it & restart test. Usually then they all start successfully.
Does anyone have any suggestions on failure reasons & possible solutions?
If there's nothing else that I might have missed, I'd like to trying increasing the time-out to say 120 or 500 seconds.
How can I do this?
Is there a way to get the agents to try starting again, or add a new vUser/script instance one the test is running?
Many thanks,
Neil
Edited by: Neil S on May 12, 2010 9:16 AM

Hi Ramesh,
I guess you need to increase the parameter "icm/keep_alive_timeout" value, it's default value is 60. please gothrough the link
http://help.sap.com/saphelp_webas630/helpdata/en/0b/1c7e7abbc311d5993a00508b6b8b11/content.htm
To increase this go to RZ10 and add this parameter in Instance profile and modify the value then restart the server to make the changes effective.
Regards,
Hari
PS: Point's are welcome

Report server times out for 3 mb of excel

I'm using a report viewer control in our application and it is working fine while displaying data and exporting it in different format by clicking export button provided by the report viewer.
I have another page but there will be a normal asp button to generate same report. so i am using report viewer control and calling the public method .Render exposed by the report viewer.
    byte[] bytes = rptViewver.ServerReport.Render("Excel", deviceInfo, out mimeType, out encoding, out extension, out streamids, out warnings);
this time i am getting below exception.
    Exception :System.Net.WebException: The request failed with HTTP status 504: Connection Timed Out.
    at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
    at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
    at Microsoft.SqlServer.ReportingServices2005.Execution.ReportExecutionService.Render(String Format, String DeviceInfo, String& Extension, String& MimeType, String& Encoding, Warning[]& Warnings, String[]& StreamIds)
    at Microsoft.SqlServer.ReportingServices2005.Execution.RSExecutionConnection.Render(String Format, String DeviceInfo, String& Extension, String& MimeType, String& Encoding, Warning[]& Warnings, String[]& StreamIds)
    at Microsoft.Reporting.WebForms.ServerReport.Render(String format, String deviceInfo, String& mimeType, String& encoding, String& fileNameExtension, String[]& streams, Warning[]& warnings)
    at Reports_GenerateReport.DisplayReport(Boolean IsExport) in f:\Sunil\View Reports\Login\Reports\GenerateReport.aspx.cs:line 1702
My doubt is like, why it is getting time outs while leveraging same report viewer control internally.
any suggestions to get rid of this?

Hi sGudivada,
Please check the ExecutionLog view in ReportServer database to learn more information about the report. The report server execution log contains information about the reports that execute on the server or on multiple servers in a scale-out deployment. For
example:
TimeDataRetrieval fields. Record number of milliseconds spent retrieving the data.
TimeProcessing fields. Record number of milliseconds spent processing the report.
TimeRendering fields. Record number of milliseconds spent rendering the report.
Reference:
http://msdn.microsoft.com/en-us/library/ms159110(v=sql.110).aspx
There is an article about troubleshooting report performance, you can refer to it.
http://msdn.microsoft.com/en-us/library/bb522806(v=sql.105).aspx
Thanks,
Alisa Tang
Alisa Tang
TechNet Community Support

Changing time-out for scheduled data refresh

Using a Power Query connection, is it possible to extend the time-out time for scheduled data refreshes? The amount of data to be retrieved is rather limited, but there's thousands of rows (NAV server).
If not, any suggestions to how to reduce latency?
Thanks.

Thorm,
Is this still an issue?
Thanks!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

Time out for Client Proxy

Hi All,
I have a scenario, where ECC sends a request to a BPM synchronously. The BPM can sends a response back immediately, if it is a success, else sends the response back to ECC after 2 minutes, if there is a communication failure.
But for the second case, ECC is throwing HTTP 500 error within 1 minute.
We tried to set up the parameter icm/keep_alive_timeout to 180 in ECC side, but it is going into error in exact 60 seconds.
Could you please suggest a solution?
Regards,
SS

yes , It is 0. For the success, I am finding the desired result. I checked the work flow monitor. The exception is triggered for communication failure, and the deadline branch is executed. As the connection is terminated by that time, the message is not being able to sent back to ECC.
Do I need to tune the same parameter for PI? Because I am getting HTTP error, it gives me a feeling that time out at ICM level.
Regards,
SS
Edited by: Subhendu Sahu on May 9, 2011 3:09 PM

Itunes times out-cannot establish connection

attempting to download 2.0.1 from itunes, constantly states having trouble downloading iphone software, connection timed out.
Need help

Im downloading 2.0.1 for my ipod touch but it never lasts more than 2 minutes then the network connection times out. Ive paid for it but i cant use it?

Both ethernet and wireless time-out trying to connect

I'm having a problem with getting my laptops' IP assigned by dhcp. Both over ethernet and wireless.
I have no problem connecting to my WPA connection at home, but now I'm at my parents for a week or two, it refuses to connect to their WEP network.
To connect to my WPA network I run this script from rc.local, which works fine on startup.
ifconfig ra0 up
iwconfig ra0 essid *********
iwconfig ra0 ap **:**:**:**:**:**
iwconfig ra0 rate auto
iwconfig ra0 channel auto
iwconfig ra0 mode Managed
iwconfig ra0 txpower auto
iwpriv ra0 set AuthMode=WPAPSK
iwpriv ra0 set EncrypType=AES
iwpriv ra0 set WPAPSK=***************************************
iwpriv ra0 set TxRate=0
dhcpcd ra0
So for the WEP network, I have commented all that out and changed rc.conf like so:
lo="lo 127.0.0.1"
eth0="dhcp"
ra0="dhcp"
wlan_ra0="ra0 essid ***** key *******************"
WLAN_INTERFACES=(ra0)
INTERFACES=(lo eth0 ra0)
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
But when I try to connect it just returns "Error, ra0: timed out".
I have also tried modifying rc.local (appropriately i think), but that seems to time-out too.
This wouldn't be so bad if I had the option to connect by ethernet, but that doesnt work either! It also times out, just like the wireless. I don't think it is the router, as all the other computers in the house work fine, both wired and wireless. But I don't think it's a driver issue either, as I can see all the AP's in kismet, and also I used the ethernet port when I first installed Arch a couple of months ago. I assume it's dodgy config files or clashing commands or something, but I've looked in the wiki and other forums etc, and I can't see what I'm doing wrong.
Any help would be very appreciated.
Thank you.
Paul

Make sure about the addresses for the LAN the router at your parents is using - they are not necessarily the same.

Blank screen and time out message when connecting to EC2 via Putty

successfully installed SP 09 trial version on EC2. when trying to connect to the instance via Putty following all the proper steps in the Guide, after upload of PPK file, all I get is a black screen with "the session time out" message in 10-15 sec.
HELP !!!!!- researched everything, trying using elastic fox to ovoid conversion of pem file into ppk . same story there.

Hello Vynga,
Thank you for your quick reply.
Yesterday, I went to the store and bought the exact same cable I used at my friend's place. And voilá, it works perfectly with my monitor. Nontheless, i am still concerned. Although the image and sound are both perfect at the moment, it doesn't seem right that my computer should only work with 1 out of 4 cables. I'm pretty sure something is wrong there.
And yes, I did check the HDMI port for damage. If something is wrong with it, I cant see it. Also, if the port is damaged, I don't understand why it would work perfectly with one of the cables.
Sincerely,
Sebastian

MII 12.1 time out for JCo Connection

Similar Messages

Maybe you are looking for