Setting time outs for a secure connection

I am researching on setting up a secure application incorporating two authentication
mechanisms:
a) Mutual Authentication to verify certificates
b) RDBMS Security Realm to validate username/password combinations
I desire a time out to take place after an hour of dormant time passes on the
connection forcing the user to re-authenticate. Any suggestions on how to configure
such behavior? I have been digging around the documentation for a while now and
I have not found anything specific controlling this time out duration.
Thanks for the help.
-cb

http://www.bulletsandbones.com/GB/GBFAQ.html#exportexactlength

Similar Messages

  • Set time out for single webservice in NWDS 2004s

    hai,
      i created webservices for session bean.created webservices are consumed by webdynpro client.
    when the webdynpro client consuming it.if the response takes more than 60 sec the webservices are timed out so i want to set the time out for my webservice.
    how can i set the time out (more 60 sec)for my webserive(for one service)?
    thanks in advance.
    Edited by: lakshman balanagu on Jun 24, 2008 11:20 AM

    Hi
    Try out this thing: I am not sure as I have not done this.
    Go to this link: http://<server>:<j2ee port>/nwa --> System Management --> Overview --> Configuration
    Application Resouce ( Select your resource from the list)
    Check for "Connection Pooling".
    Here you can check different options.

  • Can the time out for loading a page be extended for busy sites?

    (Error:)
    Problem loading page
    The connection has timed out
    The server at xxx.xxx is taking too long to respond.
    * The site could be temporarily unavailable or too busy. Try again in a few moments.
    Question: Is there a way to extend the time out for sites which are known to be busy?

    This issue appears under two different Mozzila "Questions". Both appear to have the same OUTDATED, INEFFECTIVE ANSWERS. A lot of us are on WIN7 now and still have erratic network speeds due to cable multiplexing -- but have been trained to leave the registry alone. Has not anyone solved this problem -- other than going notoriously unreliable FIOS ??

  • ITunes tells me there is an update (5.1) but it never gets any further than trying to connect to the iPad server. I've tried updating directly from my iPad and it too times out saying it cannot connect to any server. My regular Apple updates work fine.

    iTunes tells me there is an iOS update (5.1) but it never gets any further than trying to connect to the iPad server. I've tried updating directly from my iPad and it too times out saying it cannot connect to any server. My regular Apple updates work fine.

    I haven't updated yet. Apple's download servers have been too busy. Did you know you can update via wifi instead of connection to your computer?
    Here's a description of the update. Not a lot of changes for iPad 1/2.
    iOS 5.1 Software Update
    http://support.apple.com/kb/DL1504
    You can wait a while & update at your convenience.
     Cheers, Tom

  • Is it possible to increase user exit time out for a partcular user

    Dear Sir/madam,
    Is it possible to increase the User Time Out for a Particular user ?
    We do it through RZ10 and as per I know when it is changed, it is effected to all the users.
    Pls advice.
    Thanks,
    Pranab

    Hi Pranab,
    Not possible for a single user.
    Regards
    Ashok Dalai

  • Q: Set time restriction for UPK assessments

    in knowledge Center there is way of setting a start and end date for an assessment, but we would like to restrict it by time as well.
    Is it possible to set time restriction for an assessment, say from starting the assessment the user have only 1 hour to complete. I know that Knowledge center keeps track of the time spent on a specific assessment when I run reports to tracking of time is already available.
    Experts - your help is kindly required

    Hi Babu,
    Based on my knowledge, Exchange has no built-in function to restrict some users sending their messages in a period of time. Your understanding will be appreciated.
    Best regards,
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Amy Wang
    TechNet Community Support

  • How do i set time limits for my children on an ipad and ipod

    how I set parental restrictions

    That's not a feature of the iPod or iPad. Or the iPhone for that matter. The most effective way is to take it away from them when they're not supposed to be using it.
    If you don't want to do that, investigate the capabilities of your router to set time limits for specific devices.

  • How do I set time limits for my iphone?

    You know how there are parental controls on the macs in the settings. In there you can set up time limits of how long you can use the computer for but I can't find it on the iphone where you can set time limits for use. I looked at the restrictions sections but I don't see anything on setting time limit. How could I set time limits for use on my phone? I go on my phone too much and I really have to set restrictions to limit my time on it.

    There are apps you can download i believe to do this.
    https://itunes.apple.com/us/app/parental-timelock-time-limit/id689577280?mt=8
    for example

  • 'Vintage' MacBook has lost all wifi connection suddenly and stored settings. I've tried to manually input my IP address and DNS number but it just times out when trying to connect to the network can anyone help?

    'Vintage' MacBook has lost all wifi connection suddenly and stored settings. I've tried to manually input my IP address and DNS number but it just times out when trying to connect to the network can anyone help?

    You said:
    We still couldn't get it to stop timing out. I tried to download the firmware from iClarified but iTunes said it didn't recognise the software.
    Just what did yo do to gt iTunes to see the download:

  • Cant download adobe reader..... either time out or not trusted connection.... what do I do ?

    Cant download adobe reader !!
    always times out or not trusted connection.
    no problem with flash download...
    what can I do ?

    You can try downloading the offline Reader installer from
    http://get.adobe.com/reader/enterprise/

  • Setting Connection and Read time outs for SOAPConnection

    Below is the code I am using to connect to a web service. I need to set connection timeout and read timeout for the SOAP Connection. I have the solution with using system properties. But my project demands the solution without using system properties. I have gone through google and found the below page
    http://forums.sun.com/thread.jspa?threadID=5117465&messageID=9404850
    which is useful but I am confused to implement. So help me out in solving this issue.
    protected SOAPMessage sendSOAPRequest(SOAPMessage message, String recipient) throws Exception {
    URL urlEndpoint = new URL(recipient);
    SOAPConnectionFactory scf = SOAPConnectionFactory.newInstance();
    SOAPConnection con = scf.createConnection();
    SOAPMessage replyMessage = con.call(message, urlEndpoint);
    return replyMessage;
    }

    I have the same problem for a few days now. Most sites open quickly but any new pages take ages to load. I usually give up if refresh wont help ?

  • MII 12.1 time out for JCo Connection

    I'm running this MII transaction that, is using a JCO connection to run a Function Module in SAP.
    The problem we have is, that function module takes more than 60 seconds to run an return the values, that is correct because we are gathering a big amount of data, so if we run the function Module inside SAP it works ok, BUT, if we run the transaction from MII we receive a time out after exactly 60
    seconds.
    We have already modified several time out parameters inside MII
    but those changes are not making any difference.
    Do you know where that JCo time out parameter is inside MII 12.1?

    Hi Salvador,
    Try to increase the session timeout to 300 in SAP Menu --> System Properties. Initial it will be 60 sec only.
    And increase MII workbench Read Timeout as well. Help --> Setting --> Read Timeout
    If it doesn't solved your problem, go through below post
    How to set timeout for each level in MII?
    Regards,
    Praveen Reddy

  • How can I set the query time out for SQVI?

    Hi,
      I want to setup query timeout for a particular user so that if his query (created in SQVI) takes more then say 10 minutes, it automatically times out and system resources are freed up.
    How can I do this for a specific user? Also in case I cant do it for a specific user how can I do it for all users?
    Thanks for reading

    Hello Srikrishna,
    The SQVI is a dialog transaction and henc its governed by your system's rdisp/max_wprun_time parameter.
    A dialog work process has a run-time limit that prevents users from interactively running especially long reports. By default, the system terminates any dialog work process in a transaction that exceeds 300 seconds. Although the value of the limit can be changed (in the system profile parameter rdisp/max_wprun_time), that limit is always in effect for dialog work processes. No such limit applies to background work processes.
    Regards,
    Siddhesh

  • Session time-out and password security

    Hi,
    I have a webservice utility, deployed on several platforms (as an EAR on weblogic and webspere, as a WAR on tomcat), they all exhibit the same feature: on first connection, a username/password box pops up, but after the session times out (after 20 minutes or so of inactivity) and the it receives a new page request, instead of re-asking for the username/password, the app just jumps back to its own start page, and then continues without asking.
    How can I make it to pop-up the username/password box again?
    The security is implemented through the web.xml file:
    <security-constraint>
        <web-resource-collection>
          <web-resource-name>Success</web-resource-name>
          <url-pattern>/Logparser</url-pattern>
          <http-method>GET</http-method>
          <http-method>POST</http-method>
        </web-resource-collection>
        <auth-constraint>
          <role-name>webuser</role-name>
        </auth-constraint>
      </security-constraint>
      <login-config>
        <auth-method>BASIC</auth-method>
        <realm-name>default</realm-name>
      </login-config>
      <security-role>
        <role-name>webuser</role-name>
      </security-role>I found that this in itself was not good enough security as you would be able to go directly to one of the sub-pages (if you know the url), and to prevent that I pass (and check) the session-id with each page request.
    (all java servlets).
    Obviously something is missing, but I don't know what
    thanks
    Michael

    Hi Michael,
    Your web application is currently configured to use BASIC authentication.
    Instead if you use FORM-based authentication, then any new request (after your web application session times out) will be redirected to the login page. The Servlet specification has more information about FORM-based login.
    If you have a Sun ONE Web Server 6.1 or a Sun Java System Web Server 7.0 installation you can find a sample that uses form-login in the following directory
    6.1: <install-directory>/plugins/java/samples/webapps/security/form-auth
    7.0: <install-directory>/samples/java/webapps/security/form-auth

  • Time out for Client Proxy

    Hi All,
    I have a scenario, where ECC sends a request to a BPM synchronously. The BPM can sends a response back immediately, if it is a success, else  sends the response back to ECC after 2 minutes, if there is a communication failure.
    But for the second case, ECC is throwing HTTP 500 error within 1 minute.
    We tried to set up the parameter icm/keep_alive_timeout to 180 in ECC side, but it is going into error in exact 60 seconds.
    Could you please suggest a solution?
    Regards,
    SS

    yes , It is 0. For the success, I am finding the desired result. I checked the work flow monitor. The exception is triggered for communication failure, and the deadline branch is executed. As the connection is terminated by that time, the message is not being able to sent back to ECC.
    Do I need to tune the same parameter for PI? Because I am getting HTTP error, it gives me a feeling that  time out at ICM level.
    Regards,
    SS
    Edited by: Subhendu Sahu on May 9, 2011 3:09 PM

Maybe you are looking for