Minor problem - side bars not extending to footer

Hi-
I created a page layout that includes two side bars on either side of the "body" area. Normally these have text in them and adjust in height based on what's contained in them. Well my design is one such that there is purposely no text included and it's just a rectangle extending vertically from header to footer. So in order to get it to look the way I wanted it to I had to set a specific height in pixels of 800px. Recently, I added a collage and some faux text as I am starting to work on this particular page. I noticed that the bottom has white space between the side bars (on either side of the body area) and the footer. I need the side bars to hit flush with the footer. (see other pages for what I mean). I can't figure out how to fix this. I know it's probably something fairly simple but would appreciate any help. I wonder if maybe by my specifying a certain height to these side bars that it'll mess up whenever I add content with a greater width than what's set (800px). Is there an easier way to do what I'm acheiving with the side bar and not hinder the look of the site when I add content?
Here's the link to my page: http://www.ashleysperrydesigns.com/test/services.html
Thanks for any and all help. I truely appreciate it!
ashmic

Your layout is badly broken for me in Firefox but I didn't check it in all browsers.  See screenshot.
Keep your Spry Menus and images.  Simply replace the CSS Layout you're using now with something more suitable for your project goals (equal height columns). 
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media  Specialists 
http://alt-web.com/

Similar Messages

  • Side bars not accessible FF 4.0b2 on Toshiba AC100 (Android 2.2)

    Having now got FF installed, albeit not the latest beta, I have a couple of issues.
    1. The AC100 does not have a touch screen, so the swipe left/right gestures on my HTC Desire, which bring the side bars on to the screen, can't be used.
    2. Page navigation using arrow keys is not working.
    3. Pressing the 'Menu' button brings up the 'Site Options' dialogue, instead of 'Site Options' + 'Preferences' + 'Add-ons' + 'Downloads'.

    Does the AC100 have a mouse or trackpad? If so, you should be able to click and dragg to scroll the page and the sidebars. We haven't tested on this device, however.
    The "Menu" button changed in later betas. It sounds like you have a very old version. You can download the latest APK file from http://bit.ly/fxmobilebeta if your device allows non-Market app installation.

  • When I click a bookmark it opens in the bookmark side bar, not in the main window.

    I want a selected bookmark to open in the main browser window when I click it (as it has always done before)

    Bookmarks that open in the side bar is the default for bookmarks that are created via a link or button on a website to add a bookmark for that site.
    *Check the Properties of a bookmark via the right-click context menu in the side bar (Ctrl+B; Cmd+B on Mac).
    *In the Bookmarks Manager (Bookmarks > Show All Bookmarks) you can click the More button in the Details pane at the bottom right.
    *'''''Make sure that''''' "Load this bookmark in the side bar" is not selected (un-check it).

  • Custom wiki side bars not saving

    Mountain lion client - lion server. Create a custom side bar in the about pane of settings and it never saves. Do I need to upgrade to ML server?

    I have discovered you need to tab out of the "tag" box. Then it remembers.

  • Black side bars--NOT widescreen

    I know I've read about this a long time ago but have since forgotten it and I can't seem to dig up the answer in the archives so I ask for patience.
    I just made a long-term loan of my now-unused Canon GL 1 to a friend who is doing some extensive video streaming and needed a better camera than the little consumer contraption he had been using.
    He just called to ask why he was getting these thin black lines on the right and left of the frame in his QT movies were he hadn't gotten them with his old camera. I remembered this issue coming up in the distant past but couldn't rememeber what the issue was; mainly because I never had a problem with them as they outside the video-safe area and therefore never seen on anything I did when televised. Actually, I told him that I was surprised to hear he WASN'T getting them with his old camera.
    What are these lines, why are these lines, and what can be done about them if anything? Again, this is a first-generation GL 1 so we're not talking about letterboxing or any kind of issue like that. This is straight 4:3 minidv footage. Also while we both have updated versions of most apps involved, this is an issue that went back to when I was using QT 5 and FCP 1.2.5 so it ain't anything like that.
    thanks
    alan b

    What are these lines, why are these lines, and what can be done about them if anything?
    The following is an extract from a GL1 review <http://www.bealecorner.com/gl1/res/gl1res.html>:
    "You will note on the full 720x480 firewire frames, there are two black bars at left and right on the image: 7 pixels wide on the left and 6 pixels wide on the right, so the active image area is only 707x480 pixels. These bars are in the "overscan" region of any normal TV or monitor and thus not visible on video; however, this means stills obtained via firewire must be cropped to remove them."
    This seems to indicate that this "problem" is due to the design/manufacturing of the GL1 and is normal for the camera. If targeting the final file for play on a computer (or similar device) and this "defect" bothers you, would normally recommend a crop/scale action be included during the final compression.

  • Tab bar extends over side bar in FF4

    I run Tab Mix Plus and All-in_One Side Bar.
    In FF3.6 the tab bar extends to the edge of the side bar but not over it.
    In FF4 the tab bar extends over the side bar.
    I think there was an option in earlier versions of FF to control this behaviour, but I can't find it in the Options for TabMix, AOIS or FF.
    I would like the side bar to extend above the tab bar.
    TIA RP

    Welcome to the Forum!
    Although it seems right to just add a float: right; to the menubar ul, it is better to enclose the menubar ul in a div and float the div right.
    Applying the float: right; directly to the unordered list also styles various parts of the menubar with the float: right;, and not usually in the way you might like. I have also noticed that different browsers treat the float: right; differently (when applied directly to the menubar).
    Once you restore the original float: left; to your CSS and enclose the whole menubar in a div, you should be fine.
    Beth

  • Why would apple not automatically show the side bar in iTunes.  Wasted 20 min trying to find out why my ipod was not showing up.  Really really bad idea, Apple.

    Why does the side bar not automatically show up when you first download apple iTunes?  Really really bad design.  It took 20 min to fine the setting that enable the side bar.  ***?  I could not access my iPod for 20 freakin min!  Just show the **** side bar always!  Maybe apple is too big and is starting to lose common sense. 

    Because Apple update iTunes to do it that way. Apple has not said why.
    Tell Apple:
    Apple - iTunes - Feedback

  • Items on my side bar do not go Poof when dragged off?  Help!

    Aloha:
    If I pull an item off my side bar it just jumps right back. Mydock items  go poof with out problems, but not the side bar items.
    Dan
    Hawaii.

    Wow!  Right on! Why didn't I think of that!!
    Thank you very much
    Dan
    I thought I hit the corect answer button,  but mark that as a correct answer for sure!

  • Photo stream added to side bar but not updating

    I've added Photo Stream to the Finder Side Bar of OSX Mavericks through the Smart Folder Saved Search option.
    However, the photo stream in the Finder Side Bar is not updating with new pictures taken from my iPhone.
    Would anyone have a solution possibly to allow the photo stream to update and be shown in the Finder?

    Hmmm... not sure about PC but I did have this same problem while syncing to my MAC... the cause was that my contacts sync was conflicting with other sync data... Once I changed settings for Mobile Me with contacts and address book it was resolved...
    For PC... my only guess would be that a program that is told to sync contacts doesn't allow or is conflicting with the assigned photo you've set on iPhone...

  • TS1717 I can not open any of the side bar links (ie. "my wish list", "purchase history"...)

    all of a sudden the "my wish list" link in the side bar won't work. When I click it the progress bar at the top starts do "spin" but after 30 seconds it just stops spinning.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Side Bar with Favorites and history disappeared, Cabn not find themanymore inspite that they are marked

    Side Bar with either favorites or history is no longer visible. Even when they are marked in 5beeld) - picture they do not show up

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    * Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

  • How do you extend the frame from one side but not the whole thing?

    I am updating my blog and want to put a rectangle picture into the pre-set frame. I need to stretch it horizontally but the entire frame (i.e., both sides and top/bottom) stretched instead. How do you extend the frame from one side but not the whole thing?

    In Inspector, select the Graphic Inspector. Choose, from the Fill options, Image Fill. Select the image from the dropdown and click Open. Now go back to Inspector and click on Scale to Fit. Choose from the options in the window. There are a number of them which should address your problem:
    With the Blog template, you will probably need to insert a text box over the stock placement frame and work with that instead.
    Mark

  • In the calendar side bar, the groups titled "On my Mac" and "iCloud" will not merge?

    I recently updated my Macbook to Mavericks and my phone is already updated to IOS7.
    In iCal, there is a side bar, and there are 3 groups...
    "On my Mac"
    "iCloud"
    "US Holidays"
    Since all my main events are in the group "On my Mac" they do not sync with my phone because they are not in icloud.
    I need to find a way to merge the groups "On my Mac" and "iCloud" in order for my events to sync with my phone.
    Thanks

    Hey sarahgrace9,
    Thanks for the question. The following article may help in answering your question:
    iCloud: Manually importing data from Calendar or iCal to iCloud Calendar
    http://support.apple.com/kb/ht4967
    Thanks,
    Matt M.

  • Ipod 4th gen volume buttons not working. Volume bar not showing in music or video apps, not a speaker problem as this works fine when testing built in alarm tones???

    Ipod 4th gen volume buttons not working. Volume bar not showing in music or video apps, not a speaker problem as this works fine when testing built in alarm tones???

    Have you tried the standard fixes:
    - Reset:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Restore the iPod from backup via iTunes
    - Restore the iPod to factory defaults/new iPod.
    If still problem you likely have a hardware problem and an appointment at the Genus Bar of an Apple store is in order.

  • I have a disk inserted into my MAC that is not showing up in the Finder side bar. How do I eject it?

    I have a disk inserted into my MacBook Pro that is not showing up in the Finder side bar. How can I get it "ejected?" (I've checked in system preferences under CDs & DVDs and did not find a solution.)

    Five ways to eject a stuck CD or DVD from the optical drive
    Ejecting the stuck disc can usually be done in one of the following ways:
      1. Restart the computer and after the chime press and hold down the
          left mouse button until the disc ejects.
      2. Press the Eject button on your keyboard.
      3. Click on the Eject button in the menubar.
      4. Press COMMAND-E.
      5. If none of the above work try this: Open the Terminal application in
          your Utilities folder. At the prompt enter or paste the following:
            /usr/bin/drutil eject
    If this fails then try this:
    Boot the computer into Single-user Mode. At the prompt enter the same command as used above. To restart the computer enter "reboot" at the prompt without quotes.

Maybe you are looking for

  • Need help/suggestions for an older Macbook a1342 display

    I dropped my A1342 and the display went dead... I could still get video to an external monitor from the side port but the lcd was completely out. It also had a small crack on the top corner so I just assumed that the LCD was shot, but I just replaced

  • Spatial functionality in a Java client?

    Background: We've been a big supporter and user of Oracle Spatial with our CVC application since 2005. The enterprise model we adopted and have been using consists of a Java Web-Start desktop client editor application, Java middle tier application (b

  • Dynamically changing text boxes

    My development staff is new to ABAP and the screen painter, and one of those developers is designing a screen with text boxes on it that need to dynamically change according to what is brought back from the database. How would one accomplish that tas

  • Books in iBooks not being removed after syncing

    Although I use iCloud, I do back up and sync music, photos, movies, and books to iTunes on my Mac. I just purchased another book on iTunes, connected to iTunes for back up and loading the new book onto the iPad. I also unchecked some books that I no

  • Dynamically nameing a CFfunction in a loop

    I want to do this loop through query results <cffunction name= "#loop.ID#_test">      DO something with record of data from query </cffunction> now can I dynamically change the name of the cffunction ( and or Method)? Can someone help me please