MIRO and  Payment document link

Dear Experts,
Please guide me, How to get the link between payment document  and Miro  document ,  any table or report?
Regards
Chandu

The information is not stored in a single table.
You could use the following logic
a. Take the list of payment documents from BSAS using the outgoing payment GL account(s).
b. Get the corresponding invoice accounting documents (check using document type to ensure they belong to Invoice verification) from BSAK where AUGBL (clearing document) and AUGDT (clearing date) equals the document numbers obtained in a above.
c. Get the invoice line item details from table RSEG.Alternatively you could also get the invoice numbers from BKPF-AWKEY.
This can be achieved using an ABAP query or writing an ABAP code.
Note that this does not consider partial payments. For partial payments you have to use table BSIS too in step a and compare BSIK too in step B using XREF (reference) or ZUONR (assignment) as the comparison criteria.

Similar Messages

  • I have a new Mac Pro.  I want to use my old Mac Pro as a storage drive for photos and old documents, linked to my new Mac Pro.  How do I set up the old computer?

    I have a new Mac Pro.  I want to use my old Mac Pro as a storage drive for photos and old documents, linked to my new Mac Pro.  How do I set up the old computer?  Both computers have OS X10.9.3.  Currently they are connected by a Firewire 800 cable.

    You certainly could keep the old Mac Pro in Firewire mode (hold down the T key on its keyboard as you boot) to show its drives on the new MP. This is basically as fast as putting the drives into a Firewire enclosure.
    Or you could boot it normally and share its files over the network using the Sharing panel of System Preferences. If you turn on both File and Screen Sharing, you don't even need to have a monitor attached - you can do all administration using screen sharing. However, this method requires that you open all files over the network, which will be slower than the direct-connect method above, and may also not work with all applications.
    Matt

  • Cash discount amount field in MIRO and FI document

    Hi ,
    In MIRO we are overwriting the cash discount amount but for some reason in  the FI document instead of the overwritten cash discount amount SAP is taking the payment term and calculating the discount.
    Any solutions to correct this?
    Thanks

    Hi,
    I need to manually populate the discount amount in field:  INVFO-WSKTO (Cash Discount Amount in Document Currency) while capturing FB60/MIRO and not the automatically calculated discount amount(that one is working fine.).
    Thanks,
    Themba

  • Report for Accrual and Payment documents

    Is there any standard report in SAP 4.7 for showing clearing document, accrual document, cost center, WBS, Order Number, Purchase Order, Service Entry Sheet number in one report ?  Basically we need a report that shows the match between the payment document and the accrual document.
    Thanks in advance.

    Hi,
    If you are using ECC 6.0, then try using the t-code VF05N. In this transaction, you can take the billing documents of all the payers and materials.
    Regards
    Vijay

  • J1IS and Accounting document Link

    Dear Experts,
    I have created some documents in J1IS with the ETT OTHER and posted the same into accounting. But when I try to see the link between the J1IS document and accounting document, I didnt find any. I checked below tables
    J_1IEXCHDR
    J_1IEXCDTL
    BKPF
    BSEG
    I didnt find the accounting document number in the Excise tables nor the excise document number in the FI tables. Do I need to do any configuration? How do i find out the link?
    Thanks
    Suresh.

    Check BKPF-AWTYP, if document created with Idoc we can see 'IBKPF' in BKPF-AWTYP. I am not sure its standard / project dependent, but i see the same in most of the projects.
    I hope - As some one mentioned in above, you cann check user id 'Created By' also, but it may be changed any time so you can hardcode in the program.
    Thanks
    Satyasuresh Donepudi

  • Invoice document text and Payment document text should same

    Hi
    We have a AP document like:
    Dr. Personal Cost         xxxxx
    Cr. Employee XYZ               xxxxx
    (Text: Employee travel expenses for the month of October-08)
    Our new requirement is in when we make the payment to Employee in  Payment Document - Text should be like AP document - (Text: Employee travel expenses for the month October-08).
    Can you please suggest me how to configure the above.
    Thanks

    Hi,
    it is possible to do that u sing user Exect take the help of the ABAPer and do it.
    Regards
    radha

  • Difference between hyperlink and open document link

    Hi experts,
    Currently i am using sap bo 4.0
    when i see the both hyperlink and open doc link the options are same like link to web page and link to document.
    if there is no difference what is the exact use

    Hi Venkat,
    For linking 2 reports you need to go with hyperlink/document link which uses opendocument concept. please refer the URL for opendoc tutorial.
    IT Developer's World: OpenDoc URL's with SAP BI4.0

  • Same nr range in Invoice Verification (MIRO) and FI document

    Dear all can you please help to solve this issue?
    We would like to have the same number range for invoice verification and for financial document, what we have to do?
    Regards
    Marco

    Please follow the steps as below
    Step 1. Maintain FI document number range. Use transaction OMR4 and go to Number range for document types in FI. Select the company code for which you want to create the new number range interval and click on the change interval button. Insert a new document number range by clicking on the insert interval button on top of the screen.for example, I created number range interval 52 with the document numbers 5200000000 – 5299999999. Don't forget to set the external number range check box (Ext).
    Step 2. Assign FI number range to FI document types. The second step is to assign the number range created in step 1 to the FI document type for invoices. Again use transaction OMR4 and go to Document type. Double-click on the document type, which you are using for LIV invoices. In my example, I used the SAP standard document type RE. In the number range field, assign the new number range interval 52
    Step 3. Maintain MM document number ranges. Use transaction OMRJ and click on change interval button. Insert a new document number range by clicking on the insert button at the top of the screen. For MM documents, I created number range interval 52 with the document numbers 5200000000 – 5299999999. For the internal number range assignment, do not set the external number range check box (Ext).
    Step 4. Update MM number range assignment. The last step is to assign the MM number range to your MM transaction via IMG menu path Materials Management>Logistics Invoice Verification>Incoming Invoice>Number Assignment>Maintain Number Assignments for Logistic Documents>Transaction – Assign Number ranges. Two transactions are available. LIV contains the following two internal transactions that are used for the MM document number determination:
    RD: manual invoice entry (MIRO)
    RS: cancel, reverse invoice (MR8M), evaluated receipt settlement (MRRL), EDI invoice receipt, invoicing plan (MRIS), and revaluation (MRNB).
    You need to update the number range interval for transaction RD.
    hope now that things r clear
    reward accordingly

  • HU AND MATERIAL DOCUMENT LINK

    Hi Experts
    I have made a stock movement of a Handling Unit.
    I have the material document, that has the movement between the storage locations and the material.
    But where can i get which HU is involved in that movement?
    Is there any function? I couldn't find a function or a table to link that information.
    Points will be awarded.
    Thank you very much
    Francisco O.

    The handling units informatiion is in table VEKP header and VEPO details. You can link one of these wih table LQUA (quant table) to get your needed values.
    Amit G

  • Table for PO order and material document link

    Hello,
    I want to extract PO order and respecitive material documents ( IR , GR docs.)
    Can you give table(s) names ?
    Thanks,
    Ishak

    Hi ,
    You can use 2LIS_02_ITM ,2LIS_02_SCL DataSource you also check the following DataSources
    2LIS_02_SCL Tables EKKO, EKBE, T001, T001W, EKET, EKPA.
    2LIS_02_HDR  Tables  EKKO, EKBE, T001, EKPA.
    2LIS_02_ITM Tables  EKKO, EKBE, T001, T001W, EKPO, TMCLVBW, T027C, ESSR, T147K, T147
    2LIS_02_SCN  Tables  EKET, EKES, EKPO.
    2LIS_02_CGR  Tables  EKBE, EKES, EKPO.
    2LIS_02_SGR  Tables EKET, EKBE, KKPO
    Thanks
    REddy

  • Sales order and billling document link

    Is there any standard T-code which shows the Billing document number and the corresponding Sales order no?

    Dear Arun
    Either you can see in document flow itself or go to SE16, input Table VBFA and maintain datas for either of  the two fields
    -  Follow-on doc. (input billing reference)
    -  Prec.doc.categ.(input "C")
    thanks
    G. Lakshmipathi

  • Cash desk and payment lots documents not updating in DFKKOP table

    Dear Experts,
    I have noticed that my cash desk payments and payment lot documents are not getting updating in the DFKKOP table. I have identified that for this documents, the document class is updated with "1" which means "Document does not have FI-CA items".
    But, the postings where shown in the FPL9 transactions and clearing is happening as per the settings and requirements.
    So please update me, on what basis the system would determine the document class for the document types in contract accounting..
    Your inputs on this issue will be really helpful for me.
    Thanks
    Aditya Viswanath

    Hi Aditya,
    In a simple word, whichever documents are posted with MAIN/SUB creates a new row in DFKKOP with document number in DFKKOP-OPBEL.
    If a payment is posted as an open credit item, it should be there DFKKOP-OPBEL field and BETRW and BETRH will be populated with payment amount.
    However if a payment is posted as a clearing document against a debt, system updates that row of DFKKOP where DFKKOP-OPBEL is the cleared document number (debt, mostly an invoice). Clearing document (DFKKOP-AUGBL) of that row is updated with the payment document number.
    In either of the cases DFKKKO and DFKKOPK are updated and below are the reason.
    DFKKKO - document header level information (as who created, at what time, origin key, reco key etc.)
    DFKKOPK - (GL level information of the document)
    For payment lot and payment document related information you can refer DFKKZK, DFKKZP and DFKKZPT tables.
    Hope it clarifies your query.
    Thanks, Bodhisattwa

  • Linking AR invoices and Payments

    Does anybody know how are invoices(OINV) and payments
    (ORCT) linked? I mean, which table stores the information to relate them.
    Thanks all

    I found it RCT2

  • MIRO - Down Payment clearing

    Dear All,
    My Probelm is with Down Payment clearing while MIRO Entry.
    Actually after Posting of MIRO , Down Payment is not getting clearing. Checked in FBL1N. Allentrie are in OPen Status.
    I am Describing my scenario in detail and attached file with all documents created.
    We have SAP ECC 6.0 EHP5.
    We have activated LOG_MMFI_P2P business function.
    Prepared Purchase Order by giving information of Down Payment.
    Created Down Payment document thru Tcode ME2DP.
    Prepared MIGO.
    Prepared MIRO by selecting "Down Payment clearing" option and gave Payment amount also.
    Posted MIRO Document.
    Now my probelm is, after Posting MIRO Document, system should clear Down Payment Document and Vendor Invoice Document.
    But when i checked in FBL1N, all documents are in "OPEN" status. i.e with Red Mark. Actuall it should get cleared and there should be cleared status with Green Mark.
    Why system is not clearing Document. Is there any Configuration need to check or any SAP notes need to apply.
    Pl check my attached file where i have given all documents generated at each stage.
    Regards
    Swati

    Thanks for reply.
    I have followed same procedure what you have given link.
    Everything is OK except clearing document.
    You must have seen my attached file. I have completed whole procedure successfully.
    But after posting MIRO, Down payment document and MIRO Document not getting cleared.
    Checked in FBL1N, Payment document and MIRO documents are in Open Mode.
    After MIRO Posting , Both documents should gets cleared i.e it should be in green status.
    But it is in RED Status i.e Open Status.
    Request to check my attached file and if you can give some solution.
    Regards

  • FBRA - Invoice & Clearing/Payment Document in different currencies

    Hi Gurus,
    We would like to just reset and not reverse a clearing document (this is also the payment document) linked to a customer invoice. The clearing document is in USD currency, while the invoice is in USD4 (4 digits) currency.
    While resetting this clearing document in FBRA , SAP gives a pop-up message "Crcy USD4 in invoice document is not the same as the crcy USD in clearing document. Clearing document will be reversed." So, SAP resets and reverses the clearing document. But we would like to just reset the clearing document and not reverse. Is this possible? Do I need to do any config for this?
    Thanks for your help,
    Ram

    Usually you can reset or reset & reverse at a time.
    But for some documents there will be forex gain/loss line items which will happen automatically when  a open line document cleared with another document.
    e.g. Line item 1 :- 500 Cr balance in a vendor account.
    When you done the payment to this vendor through F-53, system also analyze the valuation differences if any and post.
    so these are generated automatically
    While reset this document you can't avoid reversing.
    May this is the issue you are also facing.
    you cant do anything for this.

Maybe you are looking for