MIRO. Different TaX codes

Hi all.
My users need to enter an invoice with MIRO.
The issue is that they want to enter two Tax codes in the same PO line item.
Is possible ?? How I can do this??
Thanks a lot
Ismael

Hi
ok
if this is the case
say invoice is for 15 qty and 100  so total amount 1500
put the po number in MIRO it will show 15 qty change it to 12 qty and 1200
angain put same po second line wil come againg 15 qty change it to 2 and amt 300
now in header dont put any tax code
in line item put taxcode for 16 % for first line and taxcode 4 % for 2 line
Check by both wayes GR based invoice and with out gr based invoice
hope this will help
reward if helpful

Similar Messages

  • Different tax codes in the MIRO for single service item

    Dear all,
    Customer wants to enter 2 different tax codes in the MIRO for single service item. How it can be achieved?

    >
    Milosavljevic Sreten wrote:
    > Just loudly thinking... what can be reason that one service for same invoice is taxable with two different tax codes? 
    >
    It is cross-counties transportation. Part of route outside company country is non-taxable, inside part is taxable. Amounts are proportional to distance and hence become known only at time of invoice receipt.
    Users do not want to create 2 separate invoices. They would like to have ability to enter 2 lines in MIRO. But I need your help to understand, how it can be done? Service receipt is done by single line (because actual taxable / non-taxable amount is unknown at that time). So, is it possible to enter non-taxable amount in MIRO in some additional line?

  • How to enter invoice with two different tax codes in one line?

    Dear friends,
    I have this PO for which I enter the invoice.
    I recieve later a subsequent debit for this PO from the transporter. This subsequent invoice has got extra debits, one with 21% VAT and one with 19% VAT, which means two items with two different tax codes.
    I want to enter this subsequent debit for each item of the PO, and I want to enter both debits in every item of the PO.
    How can I enter in one row in MIRO a debit with two different tax codes.
    Thank you.

    I want in the same line item to enter two tax codes.
    Do you Know if there is any way to do this?
    It is a subsequent debit and it has two items with two different tax codes. I want to enter the subsequent debit for a PO with many items and enter the value of the whole subsequent invoice. So there is the need to enter one line item with two tax codes.
    How can this be done?
    Thank you?

  • Error during MIRO for tax code .

    Dear All ,
                            User is doing MIRO but an error comes as " Tax code V0 does not exist in TAXINN " , here i need to tell u that what had happened that in P.O the material is not charged  with any tax , so user have given tax code as V0 , but he had forgotten to maintain cond for BED non cenvatable %  so he had made the cond. record in FV11 , Here my querry is that during MIRO the tax code V0 without cond record gives error from where the system is not capable to fetch the data ?
    OR is there any check so that in such cond. the error should be like this " No cond record is maintained for V0." instaed of
    " Tax code V0 does not existsin TAXINN "
    Rgds
    sap12

    U need the user should assign tax code V0 for non-taxable materials.
    Error what it giving is correct. U should assign this V0 to ur tax Procedure TAXINN.
    Path to Assign
    Spro - IMG - Financial Accounting(New) - FA Global settings - Tax on Sales/ Purchase - Calculation - Taxcodes for Tax-Excempt Sales.
    Procedure - TaxCode - Reason
    If ur not able to solve the problem, Send me ur requrement clearly.
    Subramanian.R

  • Acquisition tax in Belgium/Germany-Posting with different tax codes

    Dear Friends,
    Does anyone have experience working with Acquisition tax in Belgium and German where the goods and services purchased within EU have 21% -input and output tax such that it is ZERO. But still Tax authorities need to see both input and output tax amount with different tax code such as under:
    Expense a/c Dr 100
    Payable a/c Cr 100
    Input VAT a/c Dr 21 - Tax code A1
    Output VAT a/c Cr 21 - Tax code B1
    Any help as to how to post the above entry and how to customize tax code to get the above result and any changes if required in country code tax calculation procedure will be greatly appreciated.
    Thanks,
    Pinky

    Hi Pinky,
    When you define your tax codes, the system defaults certain tax types that have been defined in the system for specific countries. Input tax, output tax, and non-deductible input tax are examples of tax types used in Germany.
    The system determines which tax types are to be displayed by means of the country key. A calculation procedure is specified for each country key, and this procedure contains the country-specific specifications for calculating and posting the different tax types.
    When you define the calculation procedure, you must answer the following questions concerning each tax type:
    What is the base amount for calculating the tax? This can be the expense or revenue amount or, as with sales equalization tax in Belgium, a tax amount.
    Which calculation type is used to determine the base amount: percentage included or percentage separate? With very few exceptions (such as for travel expense accounting in Germany), the base amount is normally determined percentage included.
    The tax amount is 15%.
    Percentage included
    Tax amount = invoice gross amount * (tax rate/100 + tax rate)
    150 = 1150 * ( 15 / 100 + 15)
    Percentage separate
    Tax amount = invoice net gross * tax rate/100
    150 = 1000 * 15 / 100
    To which side of the account must the tax amount be posted? The input and output tax is always posted in accordance with the G/L account and asset line items. For the tax to be posted additionally, the side of the account is determined depending on the input or output tax. For the acquisition and investment tax, for example, you post to the opposite side of the account.
    Should a possible tax expense be divided between the G/L account and asset line items or posted separately? If, for example, you have a non-deductible input tax amount, you can choose whether to post to a separate expense account or apportion the tax expense between the G/L account and asset line items.
    The type of tax calculation and posting depends on the answers to these questions and the combination of those answers.
    The following topics introduce individual tax types and explain the necessary specifications for calculating and posting tax. For more information on the calculation procedure, see The Calculation Procedure.
    See also:
    Tax on Sales/Purchases: Input and Output Tax
    Non-Deductible Input Tax
    Deferred Tax: Italy
    Sales Tax
    Use Tax
    Tax Calculation With or Without Jurisdiction Code?
    Entering Taxes with Jurisdiction Code
    Acquisition Tax
    Investment Tax
    Sales Equalization Tax
    I hope this link will help you
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/e5/077e394acd11d182b90000e829fbfe/frameset.htm
    Regards
    Odaiah

  • Validations for FB70, FB75 and FB60, MIRO without Tax Codes

    Hi,
    can u help on the below issue.
    I want to restrict the users while posting(FB70, FB75 and FB60, MIRO) without tax codes, please provide Validations for the same.
    Block AR/AP for postings without tax code - AR is FB70 and FB75 - AP is FB 60 and MIRO
    Thanks&regards,
    Rajesh

    Hi,
    Please check below validations for FB60 AND MIRO ,FB70 AND FB75
    Prerequisite
    BKPF-BUKRS = 'xxxx' AND SYST-TCODE = 'FB60'
    OR SYST-TCODE = 'FB75' OR SYST-TCODE = 'FB70'
    OR SYST-TCODE = 'MIRO'
    Check
    BSEG-MWSKZ
    Please check ,
    NARESH

  • Different tax codes for a Sales order and Credit memo

    Dear All,
    We have created a sales order and in the invoice some X Tax code is determined in the Account document.
    But when we created a Credit memo request with reference to the same Sales order, we are getting different tax code in the Accounting document of Credit Memo.
    Kindly clarify how is it possible.
    Regards,
    Mullairaja

    HI
    Credit memo request with reference to the same Sales order
    Because Suppose 
    Case 1 : you created Sale order 100 PC & Delivery  50 PC, Invoice raised 50 PC
    In that above case if you take Sale order reference system will take 100 PC , but logically you need to raise Credit memo for 50 PC
    Like that we can create Some cases , so try to create credit memo request based on Invoice not for based on Sale order number
    Coming to you Query , try to check the Ship to party for that line item and also check the master data's once
    I hope you understand
    Regards,
    Prasanna

  • P.O. with different Tax codes for each line item.

    Hi
    I would like to know how the IV has been done for the P.O. with differnt tax codes for each line item. Since in MIRO at header level we can select only one tax code.

    Hi
    Raju,
    It means we can post only one invoice at time i.e.for line item same taxcode is there.
    e.g. If line item 10 has tax code A1, 20 has A2 then on header i can only select either A1 or A2 tax code & post invoice of that line item.

  • Fi document: different tax code for each line item

    Dear All,
    Our FI department needs to post FI documents by uploading the list of line items. For each line item (even when they have the same g/l account) tax code may be different from 0 to 10%. Also the tax code needs to be entered in EUR not in %. So for example they may need to post the folowing document:
              PstKey   Account    Amount     Tax amt
    001     21          Vendor       95 EUR     Tax amount 5 EUR
    002     50          GRIR          100 EUR
    003     21          Vendor       90 EUR     Tax amount 10 EUR
    004     50          GRIR          100 EUR
    At the moment users have to post it manually. Tax rate cannot be restricted to allow tax from 0 to 10%.
    Can you please advice what would be the best approach for them to make it? Providing they do want to upload the document not enter the items manually..
    Thanks a lot in advance for your help!

    Hi,
    are there some messages during this process? Upload this list in foreground batch input execution. Verify if in stop point displays any messagem. If it is the case, go to OBA5 to change its status.
    Let me know results.
    regards

  • Different tax code for condition type

    Hello Gurus,
    I have defined a calculation schema for import POs.
    I would like to automatically determine the default tax code on the invoice verification depending on the condition type, for examle:
    Cond type                     Tax code
    ZF01 Freight            --> C0 0%
    ZS01 Custom agent --> C1 13%
    Any ideas?
    Regards,
    Nelson.

    If you wish to default the tax code for the planned delivery costs this must be obtained from an independent source which is OMR2 If you do not wish to default the tax code, then the only alternative is to select the tax code when in transaction MIRO.
    At least withing the standard I don't know any solution for that =/
    Sorry & good luck!
    Plauto

  • MIRO without tax code

    Hi all,
    I am not assigning MM with any Tax procedure as i dont have to take credit of it. So while po creation no tax code is required. But in MIRO it is asking for tax code. Please suggest can i have no FI procedure linking in MM. If yes, then how to tackle this in MIRO.

    Hi,
    Crete a input tax code in  FTXP and maintain  value 0(zero) & do MIRO with zero value  tax code.
    Regards,
    Biju K

  • MIRO-NO TAX CODE DISPALY

    Hi all,
    When making invoice verification for PO No  tax code display and we enterd maually in the MIRO screen but tax code automatically disappeared. and getting error message "enter tax code"  what could be the reason please let me know. we have enterd tax code in the PO also.
    Business is going to impact please let me know.
    Regards,
    JC

    Hi,
    You need to tax code in each line item and just ticked check box of calculate tax, system would calcualte tax amount which will show in upper right corner balance field. Put this amount in amount and simualte and post it.
    Regards,

  • Same country different tax codes

    In Japan there are 2 company codes.One company code is using tax code V1=7%.
    The other company code is using tax code  V2=7%.
    Although the percentages are same the tax codes are different for the same country.Is there any option of maintaining this.
    Has anyone ome across this.

    Hi,
    There are several FM's for tax calcualtion:
    NOR3_TAX_CALCULATION                          
    ERS_TAX_CALCULATION           
    EXT_TAX_CALCULATION           
    TTE_TAX_CALCULATION           
    Try to implement one of this FM.
    or
    in transaction SPRO -> SRM Server -> Business Add-Ins for SRM Server -> tax calculation
    you have BADIs for Tax calculation.  Try to implement change tax data BADI.
    Regards,
    Marcin Gajewski

  • Different Tax codes in SRM PO and replicate ECC PO

    Hello Experts,
    Problem related to the TaX code in replicated PO .
    We are in Extended classic scenario.
    In SRM, when creating Shopping cart we enter manual tax code like e1(20%) or e2(25%) etc and when PO gets generated and replicated in the backend the tax code changes from E1 to V4.
    Now in SRM PO the tax code is E1 and in backend replicated PO the tax code is v4.
    I have checked the condition records in MEK3 t-code in ECC and found that condition record for same region is v4, i think because of this condition record the system is overwriting the tax code which is coming from SRM system.
    Irrespective of any tax code which is coming from SRM PO , the ecc PO overwrites the V4 tac code for same region.
    How i can overwrite that the SRM and ECC should have the same tax code as chosed in SRM at the time of creating a SC or a PO
    Please help to accomplish
    Thanks
    Smriti
    Edited by: Smriti arora on Jan 19, 2011 10:40 AM

    Hello Experts,
    I have posted a thread 3 days back, any help will be greatly appriciated.
    Smriti
    Edited by: Smriti arora on Jan 24, 2011 1:03 PM

  • How to enter multiple TAX codes in MIRO

    Dear Experts,
    I have a scenerio, I created a purchase order with single line item. But I recieve the Invoice with 3 different tax codes for different amounts.
    How can I enter multiple Tax codes in MIRO for a single purchase order.
    Regards
    SK

    Hi
    If you have ordered 3 items in your PO for the same vendor with 3 different Tax codes then obviously you have  to process the MIRO thrice for each line item and Tax code, since at any given time MIRO can process only One Tax Code at Header Level ( select tax code)
    Regards

Maybe you are looking for