Missing bate numbers when printing

I am using Acrobat 10 Pro.  When printing a large pdf (1000+ pages)  I start getting random missing portions of bate numbers after printing correctly for the first few hundred pages.  Windows 7 pc with 4 gig of memory.  If I start reprinting at the point where the bate numbers started going missing it prints them correctly for awhile before they again start going missing.  All the bate numbers are correct prior to printing?  Is there a setting I need to change or something?  Thanks.

Hmm, that's interesting. However, since in my case it only seems to be related to this one PDF, could it be that the PDF has an bad embedded copy of the font that my Mac is using to print with, but Windows isn't? I tried looking for any hints as to what fonts may have been used in the PDF and found references to "Arial" and "Times New Roman", both of which appear to be working fine if used in any of document. If you agree that this is probably just a bad embedded font, I will mark this as solved and move on. Thanks!

Similar Messages

  • Page Numbering when printing a multiple sheet document

    I moved this post from Pages after accidentally posting it there earlier...
    In considering an approach to solving a problem posted earlier today I thought about using the Continue (Page Numbers) from Previous Sheet setting in the Sheet Inspector to display a sequence of numbers on a series of sheets. All looked good on the live document, but when Printing to PDF or Exporting to PDF, I get the same first page number on each sheet. Further, the number on that first page depends on which Sheet was selected when I did the export. All pages and sheets print/export, it's just the page numbering that seems anomalous.
    Let's say I have a document with three two-page sheets. On the live document, page numbers are 1 and 2 on the first sheet, 3 and 4 on the second sheet, etc. Just what I would expect. When printed to PDF or exported to PDF, I get 1,2,1,2,1,2 or 3,4,3,4,3,4 or 5,6,5,6,5,6 depending on which sheet is selected as I begin the export or print dialog.
    Any one else seeing this? Is there a logical explanation for it? This is on a MBP with Snow Leopard. I haven't tried printing to paper to see what happens there.
    Jerry

    Hi Jerry,
    Not the same results, but I did get weird ones.
    Using iBook & OS X 10.4.11.
    Three two page sheets, each with a single table. Sheet 2 and sheet three produced by Duplicating Sheet 1.
    Live display shows pn/pc as
    1/6, 2/6, 3/6, 4/6, 5/6, 6/6
    Preview (sheet 3 selected), created by clicking preview button in Print dialogue, shows
    1/6, 2/6, 3/4, 4/4, 5/6, 6/6
    Preview (sheet 1 selected) shows same as above.
    Preview (sheet 2 selected) shows same as live.
    1/6, 2/6, 3/6, 4/6, 5/6, 6/6
    Repeating print to preview with s2, s1, s3 selected gives correct results each time.
    Regards,
    Barry

  • Font errors in some fonts (missing "o") only when printing. Snow Leopard.

    In a couple of fonts I use most commonly, the letter "o" (lower case o), does not print. A space appears when the letter should be. It displays fine on the screen. In a QuickView of the font file, the letter is also missing. This just started after I upgraded to Snow Leopard.
    1. What is causing this?
    2. How can I fix it?
    3. Is there a good application that will let me see in innards of the font in detail?
    4. How could the display differ from the printed version?
    More info:
    These fonts were originally purchase a long time ago (about 15 years ago) from Adobe. They are Berkeley and InterState.
    The problem occurs in all variations of the fonts.
    I have 100s of fonts; so far only these two are affected, but I haven't been able to look at every other font.

    What I don't understand is 1) why these fonts worked in Leopard but not Snow Leopard and 2) why these particular fonts.
    If you search you will find a large number of posts in these forums about changes in Snow Leopard related to fonts, e.g.
    http://discussions.apple.com/thread.jspa?threadID=2154431&start=0&tstart=0

  • Missing company logo when printing form

    Hi,
    We have sap script for billing document, in which company logo has been added to it.
    But at the time of printing the form the logo is getting missed by business user. However when I tried to print the form by using my user ID the logo is getting displayed.
    Is it the problem with business local printer setting or with form itself?
    Thanks in advance.

    Hi Nishad,
    The problem here is neither with the user nor with the form
    but the logo doesnot exists for the user in the location u have to place.
    so if u place the logo in their server the problem will be solved.
    Regards,
    Prakash.

  • Missing EXIF data when PRINTING jpeg using Print or Slideshow Module (LR2)

    Folks,
    Is there a way to have LR2 include EXIF information when you create a JPG via the Print or Slideshow Module? The EXIF data is present if I export via the Library Module.
    However, if I "print" a jpeg either under the Slideshow or Print Module, most of the EXIF data particularly the camera info is missing.
    Thanks for your help.
    Jg

    Thanks Bob. I believe I have tried that...when you print to jpeg you have option where to save and I save to same folder and then re-synchronize folder in lightroom. Then I try to synchronized metadata between the original file and the new jpeg but the camera and other exif does not transfer over. The title, caption and copyright does work but your basic info such as camera, ISO, lens, f stop and shutter speed are missing
    Regards,
    Paul

  • Missing track list when printing artwork

    For a while now when I print the cover art from a burned cd the track list side is left blank most of the time. If I try to print just the track list it's all run together and unreadable since I downloaded the latest version of itunes. Would this be a printer issue or something to do with itunes ? Anyone else with this problem?

    Good news! I received an iTunes update (11.0.1.12) from Apple today and the problem is fixed.

  • How to realize page numbers when printing from an ALV-Grid

    Dear ABAPers,
    with resprect to SAP note 402627 ALV-Grids in 4.6-Systems
    do not produce a header with Actual date, report title
    and page number as it does from release 610 on.
    I've spent almost the entire day on searching the SDN
    for an answer on how I could produce a page numbering.
    I've also tried quite a lot, for example by using the
    END_OF_PAGE event, but nothing worked.
    I'm using the FM REUSE_ALV_GRID_DISPLAY, but even an SAP
    sample report BCALV_GRID_01, which is supposed to
    demonstrate the object-oriented use of the several
    PRINT-events does not process PRINT_END_OF_PAGE in our
    4.6C-System.
    Is my search in vain or does anybody have experience
    with those kinds of problems under 4.6x ?
    Thanks in advance
    Andreas Flügel

    I think you should be able to use PRINT_END_OF_PAGE event for the same. That should work. Use SY-PAGNO variable to print the page no in this event.
    You will have to register this event and set the handler for the same.
    Did you try this?
    Regards,
    Ravi

  • How can I include telephone numbers when printing address labels using Dymo Labelwriter Turbo 330?

    I am able to pull info from Apple Address Book using the Dymo Labelwriter application, but I cannot seem to include telephone numbers. Does anyone know how to do this?

    short answer
    1 - NO
    2 - It is up to apple to correct the issue and I have heard they will look at it. It doesn't hurt to call customer support both apple and dymo to let them know you are unhappy about this [it used to work fine in later versions of 10.3]. Also don't let them convince you that you must have installed the driver wrong or something. I have had the same problem on 3 different macs [one of which was brand new] with 2 different dymo label printers.

  • WRITE_FORM_LINES. Need to change the style when printing in the SAP Script

    Hi Experts,
    I am using the WRITE_FORM_LINES function module to write a list of numbers.
    But I need to change the font of the numbers when printing it.
    I have changed it_header-tdstyle = 'S_DOCUS1'...SAP standard one but I need to create my own style.
    I have created using SE72 and has given my own defined Character and Paragraph formats.
    when I pass through the function module there is no change in it.
    I think I need to create a text object is .. Can any one explain me hw to create a text object
    http://help.sap.com/saphelp_nw04/helpdata/en/d6/0db827494511d182b70000e829fbfe/frameset.htm
       CALL FUNCTION 'WRITE_FORM_LINES'
              EXPORTING
                function                 = 'APPEND'
                header                   = it_header
                window                   = 'MAIN'
              TABLES
                lines                    = it_serial
              EXCEPTIONS
                function                 = 1
                type                     = 2
                unopened                 = 3
                unstarted                = 4
                window                   = 5
                bad_pageformat_for_print = 6
                spool_error              = 7
                codepage                 = 8
                OTHERS                   = 9.
            IF sy-subrc <> 0.
              MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                      WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
            ENDIF.
    Waiting for u r replies...
    Thanks,
    Chaithanya K

    In se75. go in change mode and click create button in application tool bar.
    Now text object is something to which a text is attached, like, a material or a Purchase order etc.
    Text format is like rich text format or plain text depending upon which an editor is invoked
    Specify Editor application. SAP provides standard Editor application choose from one of them(TA or TN)
    Line width
    This attribute determines the line width to be used for this text in the text editor. A SAPscript text line may consist of up to 132 characters.
    Save mode specifies how a text is saved in
    dialogue task
    When calling the corresponding save function, the system immediately writes the text module to the text database.
    in update task
    All changes to the text modules of a transaction are stored intermediately in a buffer. Only when the application object is updated does the system write the texts to the log file and, in the update task, stores them in the text file.
    For not in text file
    You can use SAPscript to edit texts that are not stored in the text database. In this case, SAPscript only returns the changed text table to the application program, which is itself responsible for storing the text

  • Pages 5.2 Table missing text when printed

    I created a document with several tables.  These tables contain algebra formulas with superscript.  I read in another forum that the issue may be the use of the superscript.  However their problem only occurred when printing the document as a PDF.  I am having the problem printing from both Pages and as a PDF.  Some superscript appears as it should.  Not all missing text is superscript.
    Any ideas?  I hate to have to recreate this document in Word.  I took me forever to create.
    Mavericks 10.9.3
    Pages 5.2

    Known limitation with Pages v5.2. If you had Pages ’09 installed before the upgrade downgrade to Pages v5.2, it was moved to /Applications/iWork ’09.
    You will need to export from Pages v5.2 as Pages ’09 in order to process your work in the older Pages version. You will also need to open the Pages ’09 document either through that Applications file chooser, or via the right-click, contextual menu Open with > Pages (4.3). Double-clicking with both Pages installed will default to using Pages v5.2.
    LibreOffice is a free alternative to MS Word, and works better with Mavericks than does OpenOffice.

  • With newest version of numbers how do you remove the page number when printing?

    I have the newest versin of numbers, just downladed it and now i can't get rid of the page numbering when i go to print??  Please help

    Thank You.  That was so simple.  Just in the other version you could just click it off.  I appreciate the help

  • Gray Dots when printing in Pages/Numbers

    When printing from Pages (v 5.0.1) and Numbers (v 3.0.1), there are tiny gray dots all over the page. How do I get rid of these?

    I have the same problem. It doesn't show dots on screen or when I choose "Open PDF in Preview" from the Print dialog box, but when I print they still appear.
    It also happens with Mail, Numbers and Keynote but not with TextEdit or Preview (unless I exported the document as a PDF from Pages or Numbers).
    It is infuriating.

  • When printing a PDF file I would like to ensure that all 'chapters' print on the odd numbered pages.

    I need a way to set up a PDF file so that when I print it all new chapters (and single sided forms) print on the odd pages. These PDFs are available for viewing on the network but occasionally there is a demand to print one of them. Is there a 'chapter start' (or similar command) which will allow the PDF to  more properly format when printing.

    There's no automated process because I don't think Acrobat could determine what was the beginning of a chapter. However, you can insert blank pages that start the first page of chapters to an odd-numbered page.
    In Acrobat XI, that is Tools > Pages > More Insert Options > Insert Blank Page

  • When bates numbering a .pdf in XI, how can I change the file name to include the bates number AND its name?  I know under file output, there is an option for either/or.  I want both.  Thank you.

    when bates numbering a .pdf in XI, how can I change the file name to include the bates number and the file name?  I know under "file output: it's either/or.  I need both.  Thanks!

    Long ago I wrote a little demo using the touch command. Check out the following thread:
    http://forums.ni.com/ni/board/message?board.id=170&message.id=25128#M25128
    LabVIEW Champion . Do more with less code and in less time .

  • Missing field when printing labels with Address Book

    I am would like to print the labels for my clients Christmas Cards, using AddressBook. When doing print > label, I get all their names and addresses on the labal formt that I want but the company name is missing. How do I get AddressBook to include the field "company" into the label ?
    Thanks for help.

    If you need to include the company's and individual's name, here's a work-around:
    1) for each such card, you put the individual's name and leave the Company field empty.
    2) Put the company name in the field for "Street"
    3) Put the street address, including Apt. # in the field for "City"
    4) Now, put the City, State, and Postal Code all in one field: the field for "Country".
    5) save the card.
    When printing labels, proceed as follows:
    1) Print>File>choose your Avery label under "Layout" and then click "Label."
    2) Here, you make sure to check the box so it will "Print country." Don't forget this step, or the whole plan is a failure.
    This works, but it only works if the card is in-putted as described above. It won't work if your cards are already set-up with the "company" field and the "name" field.

Maybe you are looking for