Missing music, jumbled letters and a FIX for Newsstand

I have an iPod Touch 4. That being said, the following problems and 1 fix have been found since the 5.0 and 5.1 upgrades:
1. Under artists in the Music App, no artist appears after the letter 'R'. (they appear and play when I search iPod)
2. Under artists, and after the letter 'D', the artists cease to match the proper letter.
What I've done: After cruising the forum for an answer and finding none, I restored my iPod with no success (took a long time). I've added and taken away artists and playlists. I've even thought of sacrificing some sort of small animal (joke) just to be able to get back to where I was before the last 2 updates.
In fact, I was a little annoyed when the last update didn't fix it.
That being said, after the 5.0 update and the appearance of Newsstand, I did everything to hide it (Sorry Conde Nast). A solution I found elsewhere was this:
Form a NEW folder. As it is forming, slip Newsstand in. It takes a few tries but will work. However, once it is inside the new folder, NEVER open Newsstand as it will crash the ios.
Some help would be nice, and I hope I've helped someone else with the Newsstand issue.

Just as an fyi, to shorten this procedure instead of deleting the files i found out you and open the .itl files and delete all the lines in it so its an empty file.
Then open itunes, and it will rebuild the database with the files from the .xml file.
This saves you from having to rescan the songs..

Similar Messages

  • [svn] 2312: CursorManager: New functionality and a fix for SDK-15029

    Revision: 2312
    Author: [email protected]
    Date: 2008-06-30 17:24:01 -0700 (Mon, 30 Jun 2008)
    Log Message:
    CursorManager: New functionality and a fix for SDK-15029
    * NEW: When the mouse leaves a window/stage where a cursor is set, the cursor no longer sits on the edge of the screen until the mouse comes back into the window, it disappears.
    * NEW: In AIR, when the mouse leaves an active window and glides over an inactive window (without giving it focus) where a cursor is set, the system pointer will be hidden and the custom cursor will appear while gliding over that window, and disappear when you leave that window.
    * FIX: When a cursor is set in a child Window, and the mouse moves over another Window or WindowedApplication, the cursor no longer disappears -- the correct system pointer or custom cursor will display.
    * Fixed listener leaks when switching systemManagers (neither Jason nor I can tell when/why it would happen in CursorManager, however).
    Reviewer: Jason
    Bugs: SDK-15029
    Doc: No
    QA: Yes, here's an exhaustive list of ideas:
    * We'll need tests for the new behaviors.
    * For all tests, we need to try behavior in air AND behavior in (sa)player, and test regressions.
    * Please test SDK-15583 again, all other cursor tests.
    * Take the test case for SDK-15029 and open up TWO MyWindows. Test how the cursors change across all three app windows when they are overlapped like a Venn diagram, with different combinations of custom cursors on and off -- we should have test cases for all of this behavior.
    * Test that custom cursors work properly when the mouse leaves a non-rectangular stage with transparency.
    * Test mouse drag situations -- drag off stage, release, move back to stage; drag off and back onto stage, etc.
    * In my tests, I found a lot of bad behavior in AIR, and player seemed to be fine. Do we have drag and drop use cases for AIR with custom cursors?
    A list of some bugs I encountered:
    * BUG (cosmetic): If the mouse is outside the stage when a cursor changes for the first time (say you toggle a checkbox which sets the cursor using the keyboard), the cursor will appear on the stage in the last known mouse position. When the mouse returns to the stage, everything will start working correctly again.
    * BUG (cosmetic): In AIR, if you drag out, and back into the window, then release, a MOUSE_OUT is fired again over the stage, which is wrong. The mouse coords given are (-1,-1), also wrong. This causes the system cursor to show instead of the custom cursor.
    * BUG: In AIR: if you drag off the edge of a Window with a custom cursor, the cursor will vanish. The MOUSE_OUT event correctly event fires while dragging off the window. Even though the handler tells the system mouse cursor to appear, it doesn't -- might be an AIR issue, since the mouse is still dragging when told to show. If you move back over the active window without dragging, the cursor goes back to normal.
    * BUG: In AIR: if you drag over another window with a cursor, MOUSE_MOVE events don't fire on that other window until you let go. Therefore, a custom cursor in that window does not get drawn, nor does a system cursor. If you move back over the active window without dragging, the cursor goes back to normal.
    * BUG: In AIR: When dragging, off a window, Event.MOUSE_LEAVE only fires after the mouse is let go (unlike MOUSE_OUT), EVEN IF the mouse is dragged back over the window and released over the window. So you're told the mouse left when it didn't.
    * BUG: In Player: I could never get Event.MOUSE_LEAVE to fire when added to the stage in saplayer or browser.
    Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-15029
    http://bugs.adobe.com/jira/browse/SDK-15029
    http://bugs.adobe.com/jira/browse/SDK-15583
    http://bugs.adobe.com/jira/browse/SDK-15029
    Modified Paths:
    flex/sdk/branches/3.0.x/frameworks/projects/framework/src/mx/managers/CursorManagerImpl.a s

  • Service packs and hot fixes for  BusinessObjects Enterprise XI 3.1

    Hello Experts.
    Which is the cronology or order of the service packs and hot fixes for  BusinessObjects Enterprise XI 3.1, or which are tha latest?
    thanks

    For BO XI 3.1, SP 5 is the latest, released in August 2011. You can directly install SP5 if you already have SP3 installed.
    Previous Service Pack is 4.0 and Fix Pack 4.1.

  • How do i change my security question? I tried to buy music on itunes and it asked for verification i can not answer the security questions correctly

    How do i change my security question? I tried to buy music on itunes and it asked for verification i can not answer the security questions correctly...

    Reset Security Questions
    Frequently asked questions about Apple ID
    Manage My Apple ID
    Or you can email iTunes Support at iTunes Store Support.
    If all else fails:
      1. Go to: Apple Express Lane;
      2. Under Product Categories choose iTunes;
      3. Then choose iTunes Store;
      4. Then choose Account Management;
      5. Now choose iTunes Store Security and answer the bullet questions, then click
          Continue;
      6. Sign in with your Apple ID and press Continue;
      7. Under Contact Options fill out the information and advise iTunes that you would
          like your security/challenge questions reset;
      8. Click Send/Continue.
    You should get a response within 24 hours by email.
    In the event you are unsuccessful then contact AppleCare - Contacting Apple for support and service.
    Another user had success doing the following:
    I got some help from an apple assistant on the phone. It is kind of round about way to get in.
    Here is what he said to do and it is working for me...
      a. on the device that is asking you for the security questions go to "settings", > "store" >
          tap the Apple ID and choose view"Apple ID" and sign in.
      b. Tap on payment information and add a credit/debit card of your preference then select
          "done", in the upper right corner
      c. sign out and back into iTunes on the device by going to "settings"> "store" > tap the
          Apple ID and choose "sign-out" > Tap "sign -in" > "use existing Apple ID" and you
          should be asked to verify your security code for the credit /debit card and NOT the
          security questions.
      d. At this time you can remove the card by going back in to edit the payment info and
          selecting "none" as the card type then saving the changes by selecting "done". You
          should now be able to use your iTunes store credit without answering the security
          questions.
    It's working for me ...I just have to put in my 3 digit security pin from the credit card I am using.
    Good Luck friends!

  • IPhone 5s intermittently powers off.  I have to do a hard restart (simultaneously hold down power button and home button).  Is there a cause and a fix for this?

    iPhone 5s intermittently powers off.  I have to do a hard restart (simultaneously hold down power button and home button).  Is there a cause and a fix for this?

    Hello TJLapplesupportcom,
    Thanks for using Apple Support Communities.
    Please follow the troubleshooting steps below to resolve this issue you're having with your iPhone.
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Take care,
    Alex H.

  • Itunes artwork display issue and a fix for  'unknown error occured (-50)'

    Too bad they dont have stickies. This would be a great one.
    This is a thorough fix for art work and the -50 error.
    If you see artwork in itunes, first verify that the artwork is in the mp3 tag using a program like "tag and rename" http://www.softdepia.com/tagrename_download1291.html
    If the artwork shows up in tag and rename, then you added it correctly.
    If the artwork isn't displaying on ipod, delete the song and retransfer to the ipod. Next make sure the "view artwork" check box is checked. To do this connect your iPod to iTunes and there will be a checkbox that should be checked to see if you want artwork to show up on your iPod.
    If you get this message -
    The ipod cannot be updated. An unknown error occured (-50).
    And have no artwork at all in you IPOD , dont fret. I am getting there..
    NO you DO NOT NEED to FORMAT YOUR IPOD YET as commonly posted. I have tested and retested the following fix-
    Eject IPOD. Kill ITUNES.
    Backup the following files
    iTunes Library.itl
    iTunes Music Library.xml
    & anything in the Previous Itunes library folder
    and delete them. More info on these at http://docs.info.apple.com/article.html?artnum=93732
    Dont worry, its much easier to recreate the database than to wipe your IPOD.
    Next Start up ITUNES. Plug in IPOD. You now should have a empty database.
    At this time, uncheck copy ARTWORK to IPOD, and when it's done deleting artwork, CHECK Copy ARTWORK to IPOD.
    It now should sucessfully display ARTWORK and not get the -50 error!!
    Now, goto you ITUNES Music folder and drag to the library and it will add you music back in, including your PODCASTS.
    All you need to do is click the RESUBSCRIBE button and you are back in business!
    IF this fails, which i cant DUPLICATE anymore, try this
    http://docs.info.apple.com/article.html?artnum=300248
    Its the DREADED IPOD FORMAT article.
    But you probably wont need it if you follow all these steps.
    Post back if this doesnt work and if it does, give me some credit;)

    Just as an fyi, to shorten this procedure instead of deleting the files i found out you and open the .itl files and delete all the lines in it so its an empty file.
    Then open itunes, and it will rebuild the database with the files from the .xml file.
    This saves you from having to rescan the songs..

  • Quick and easy fix for linux shell script in 1.2.1.32.13

    Hello, right after installing sqldeveloper in my home directory and linking the script in my bin dir I found a small problem with the shell script for linux.
    I downloaded the "Multiple platforms" zip file.
    here is the fix:
    change "dirname $0" to "readlink -f $0 | xargs dirname"
    with this fix, linking to the shell script won't cause the script to use the bin dir instead of the real directory where sqldeveloper is installed.

    This symptom occur because a 64-bit process that runs on a computer that is running an x64-based version of Windows cannot load the 32-bit .dll files that are required by some program features.
    You may try the following work around:
    You must use the 32-bit version of Windows Explorer. The 32-bit version of Windows Explorer is located in the %windir%\Syswow64 folder on the computer that is running an x64-based version of Windows.
    To use the 32-bit version of Windows Explorer, follow these steps:
    Click Start, click Run, type the following in the Open box, and then click OK:
    Drive_Letter:\windows\syswow64\explorer.exe /separate
    Note The placeholder Drive_Letter represents the drive where the x64-based version of Windows is installed.
    For more information:
    Some Windows Explorer extensions and some Control Panel items are not displayed on computers that are running an x64-based version of Windows
    http://support.microsoft.com/kb/895561#appliesto
    Now check if the issue is resolved.
    You may want to try the following steps:
    PDF thumbnail view via the Acrobat reader:
    1. Run Acrobat Reader. In Reader, click File > Open and navigate to the folder(s) containing your PDF file(s). If necessary, move the slider to show all your PDF files.
    2. Cancel out of Open and exit Reader.
    3. Open Windows Explorer and navigate to the folders(s) containing your PDF file(s).
    4. Click Views and move the slider until you see PDF thumbnails.
    Thanks and Regards:
    Sanjay Manju Suman
    Adobe System Inc.

  • The Mail app is not working after Mavericks download and recent 'fix' for Mail

    The Mail app won't start after upgrade to Mavericks, and needs force quit to close spinning pinwheel. The recent fix Apple offerered doesn't help. What are my options? Thanks

    I am also getting same problem...................anybody please help.

  • Cheap and effective fix for scratching DVD/CDs in iMacs

    After looking at the slot on the side of the iMac, I couldn't help but notice how sharp the edges of the sides are. That will cause huge problems for everyone of us at one point or another. After reading a number of complaints surrounding this design flaw, I have come to a solution that each one of us can do with little or no trouble at all.
    Cut a 4" piece of electrical tape, preferably the softer vinyl type (Scotch 33+), and slide about 1/4" inside the slot, on the back side of the Mac only since we're about protecting the media side. Press the rest of the tape along the outside towards the back of the iMac. Now take the tip of a butter knife and gently press the tape you inserted in the slot against the rear of the opening. It will create sort of a wrap around bumper.
    This worked for me.

    Hello Dino,
    Thanks for the reply.
    I haven't burned anything using the iMac burner. I have two Plextor external DVD burners attached to the iMac and use them instead since they are much faster. I suppose at some point I will burn a CD or DVD and see what the fuss is all about.
    As for the other "issues" relative to the iMac, I am 100% satisfied with it and do not wish to listen to others complain about their machines so I have, for the most part stayed away from the other discussions.
    After all, these are machines. I'm just tired of all the bit**ing and moaning about a mass produced piece of hardware. There are expectations, and of course some of them are not agreeable to others, but I am not a fan of publicly bashing a manufacturer. Apple is aware of each and every issue it faces and each one results in a learning curve for the next generation. If this thing is such a piece of crap, then don't buy it. There are choices one can make and one of those is to not buy an iMac. For the record, I would buy another one if I needed to.
    ....off my soapbox.
    Thanks.
    RSR

  • Burn music CD's and make copies for the car

        I bought a HP Pavilion 17-f010us notebook to burn CD/DVD's thinking it had a CD burner since it had a DVD burner only to discover it requires a Windows Media player, which although disappointed I'm willing to purchase.  Then I find
    I can't even download Windows Media Player to this system If I do buy it. Got to be a solution to this problem.  Does anyone know how to solve this , or know of another software program compatible with Win 8.1 64bit to download free (first choice)
    or to purchase?
      I can only assume others have run into this catch 22 right??  Any Ideas or suggestions?

    Hi Haretwo7391,
    Windows Media Player 12 is included as part of Windows 7 and Windows 8.1, for how to use Windows Media Player, please check:
    Getting started with Windows Media Player.
    If you can't open Windows Media Player, please first take a check of the version of your Windows:
    Which Windows operating system am I running?, then follow the article below to find the proper Windows Media Player:
    Get Windows Media Player
    For more information about Windows Media Player, please check:
    Windows Media Player
    If any further help needed, please feel free to update here.
    Best regards
    Michael Shao
    TechNet Community Support

  • CS6 and GPU fix for MPE hardware acceleration

    The problem of this hack not working has been covered in a number of discussions so why raise it again. The solutions that resolved others problems are not working for my card! Tough luck I guess.
    My card is the ASUS Radeon HD 7950 CU2 3GD5 V2 and everything I have read says by doing the hack (card name in the opencl txt file) CS6 should offer hardware acceleration for the MPE.
    I have the latest drivers from AMD and am using windows 8.1 but GPUsniffer still does not recognise my card. I have tried various forms of the cards name in the txt file, still no luck.
    I've posted this because I have run out of ideas to try - any suggstions would be welcome. I have even reinstalled CS6 but no luck. Photoshop sees my card ok!!!!! I feel sure it is something simple that is not set correctly or perhaps the order in which things should be updated/installed. Any suggestions short of signing up for CC rental would be welcome!

    Formally I believe these two responses to be correct - Adobe do not officially support my card in Premiere pro CS6. My understanding from many web discussions is that the "not so secret hack" (phrase used by an Adobe employee) can be used but they do not provide official support.
    Assuming I am correct I am still left wondering what else to try.

  • Itunes:  i want to find a single fix for missing music on itunes rather than using "iTunes: Finding lost media and downloads" on a case by case basis.

    recently when i was creating a playlist, i realized that i was missing music from my extensive itunes (12.0.1.26) library.  i found the solution "itunes:  finding lost media and downloads" and used the general approach to find the music in finder and copy it to itunes.  i don't want to do this every time i find i am missing music.  is there an automated fix?  i want apple to develop a way to automate the fix.  can it be that this isn't a problem for many people?
    i ask this now because i just looked for music i thought i had but can't find.  maybe i am wrong about having the artist, but it has happened on another artist too.  i can't trust itunes to tell me whether i have a song or not.  i don't want to keep going back to finder, especially when the instructions in "itunes:  finding lost media and downloads" doesn't actually reflect my system (os x 10.7.5).
    i don't want to try to do a restore.  i have never done a restore on my mac (previously a pc user).  and, i don't know how far back to take the restore to find the old music.  and then music i have added since i lost the old music wouldn't be there.
    i understand that there are so many system variables that apple would need to take into consideration with a general fix.  but:  i am assuming that apple's changes have caused my problem and feel that apple should do something to fix it.  perhaps my assumption is incorrect.
    thank you for your help.

    limnos, i always have backups.  the problem is that i don't know how far back in time to take a restore because i don't know how long this has been going on.  and, if i take the restore back very far, i will lose what has been added since the music started to disappear. 
    i don't even know what you mean when you say "you will check there aren't any broken links (use a script from the Dougscripts web site) before you do a backup."
    i agree with you to some extent about not automatically installing upgrades.  i'm still running lion and was pushed to it from snow leopard.  the problem is that i have a hard time envisioning the changes described in an update to judge whether something is valuable or not. 
    i have questions about your last paragraph.  i'm going to repeat it here and then insert my questions as i go.  please forgive my all caps for the moment:
    "Now for your missing music, is it that there are broken links, or are things missing completely from the library?" I DON'T KNOW ENOUGH TO ANSWER THAT QUESTION.  I BELIEVE THAT THE PROBLEM HAS TO DO WITH BROKEN LINKS.  WHEN I COULDN'T FIND THE MUSIC THAT I THOUGHT I HAD LOADED INTO ITUNES YEARS AGO, I FOUND THE CD'S AND IMPORTED THEM TO ITUNES.  I GOT A MESSAGE ABOUT SOME OF THE TRACKS BEING DUPLICATES THAT ASKED WHETHER I WANTED TO IGNORE OR IMPORT.  I CHOSE IMPORT BECAUSE ITUNES DIDN'T TELL ME WHAT WAS DUPLICATED.  IT WAS ONLY AFTER RE-IMPORTING SEVERAL CD'S THAT I REALIZED THAT THERE WERE NOW DUPLICATES OF THE CD'S:  THE FILES I HAD JUST LOADED AND THOSE THAT I HAD LOADED SOME TIME AGO.  THE ORIGINALS MAGICALLY APPEARED AFTER I RE-IMPORTED THE CD'S.   I'M GUESSING THAT THIS IS AN EXAMPLE OF A BROKEN LINK  I DON'T KNOW HOW TO RECOGNIZE A BROKEN LINK OR HOW TO PREVENT ONE.  AFTER I REALIZED THE PROBLEM, I FOUND THE "FINDING LOST MEDIA AND DOWNLOADS" QUIDE.  I LOCATED THE MISSING MUSIC IN FINDER AND DRAGGED IT TO ITUNES.  DOES THIS COUNT AS A BROKEN LINK? 
    "If the latter and you use iTunes default settings for managing media, you can drag your media folder to Automatically Add To iTunes.  It should add anything in the folder but not in the library list but ignore things that are."  CAN YOU REPHRASE THIS LAST PARAGRAPH?  I DON'T KNOW WHAT "DEFAULT SETTINGS FOR MANAGING MEDIA" MEANS. 
    FOR "DRAG MEDIA FOLDER TO AUTOMATICALLY ADD TO ITUNES,"  I THINK YOU MEAN I CAN DRAG   /MUSIC/ITUNES/ITUNES MEDIA/MUSIC   IN FINDER TO THE ITUNES ICON IN THE DOCK.  AND, THAT THAT ACTION WILL REPLACE ANYTHING MISSING IN ITUNES BUT NOT DUPLICATE THE FILES THAT ARE IN ITUNES.  IS THAT RIGHT? 
    thank you for your time and help, limnos.

  • Recently I was adding music to my Ipod Touch and charging it, afterwards, my Itunes was missing music, does anyone know what happend?

    A few days ago, I plugged my ipod touch into my computer to charge it, and also add new music I purchased. When I unplugged the USB cable ( I disconnected it from the ipod first, as I was told to do) I went to look through my music. There was a notification, I don't remember what it said verbatum, but the gist was "177 songs could not be properly synced onto your device". Now, I'm missing music from my itunes library. For example, I purchased two full albums from the same band, now over half the songs from the albums are just gone, they are no longer on my ipod or itunes. Does anyone know what happend, and/or how I can fix this? Please and thank you
    P.S. This happend after installing itunes 6, I've noticed many other people are also having problems with it as well

    Could be several things. Without more information like what was the wording of the error message I will not even guess.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store         

  • Adobe Flash Player 10 Fix for WinXP and Vista, IE7, IE8, Firefox, ect.(New Fast Fix)

    (This is a possible solution for most users) I have found that inside the folder C:\WINDOWS\system32\Macromed\Flash (WinXP Home/Pro) (Computer > C: Drive > Windows > System32 > Macromed > Flash for Vista) there should be a file named FlashUtil10b.exe (IF NOT YOU SHOULD UPDATE AS SPECIFIED!) (or FlashUtil10a.exe or for older versions something similar depending on your version), which is the update utility for flash player. Click on this and if it updates, you will have to restart your computer. This should fix any missing files, and update you to the latest version.
    On a side note to all those who read this, I downloaded and installed 5 different times, the same version, from different websites, all for the "new" flash version, and they didn't work (this also included trying to update Shockwave player itself). Apparently, going directly to the website and downloading a new version of Adobe Flash Player, and installing, doesn't uninstall the older version, (though it says it does nor does the uninstaller work directly from the website) nor fixes the problem. I assume they are aware of this problem, because they included this bug fix in revision 10b. This fix should work for those of you whom cannot view/see flash images as well. There also appears to be a bug/reference problem with the installation of IE8 giving the error "Missing Shockwave Decompression XTRA", when trying to play a Shockwave/Flash file, which seems also to affect Firefox and other browsers. It doesn't recognize that the folder or files that it needs in it, exist. I never had his problem before, until IE8 was installed. I checked which version I had in the system32 folder and found this updater built in to Adobe. Version 10a does NOT automatically update, but version 10b includes this fix. I currently had version 10a when I received this error, and began digging for a solution. Doing the update as described above fixed the problem, and updated it to version 10b.
    The new flash version 10b has some new features, such as volume control, auto-updating, and several rendering options for those who may have a faster or slower computer/video card.
    I found this works great for XP users but unsure of the Vista users. The process is the same  for Vista and the update should still work the same, as long as you run it as Administrator, I assume. I have this also posted on wwwdslreports.com at http://www.dslreports.com/forum/r22115254-IE-IE8-and-Adobe-Flash-Question and here http://www.dslreports.com/forum/r22361930-Adobe-Flash-Player-10-Fix-for-WinXP-IE 8-Firefox-ect. It appears to work for everyone so far. I have not heard of any problems from users with this problem running the RC (Release Canidate) for Windows 7 yet.
    I hope this works to your benefit.
    Please leave a reply to help Adobe and other users know if this fix worked for you or not. If not, please explain what you did, and the effects your seeing, including operating system, site of the flash file trying to view, browser type (ex. IE6, IE7, IE8, Firefox, Opera, ect.), and I will try to help you as best I can.
    (I would strongly recommend those not using IE8, or Firefox 3.5, get the updated versions)
    If your looking for uninstallers go to this site: http://kb2.adobe.com/cps/141/tn_14157.html
    If your looking for a true full install, you can download this developer version for Windows and Mac: http://download.macromedia.com/pub/flashplayer/updaters/10/flash_player_update2_flash10.zi p (44MB) (If you download this, I would recommend you still follow my instructions for the Flash Utility before restarting your computer.)

    I would recommend all users having problems try the above solution first.
    I have posted this on a couple of websites, and so far it has fixed everyones problems.
    Firefox 3.5 Beta 4 has Adobe Flash Player coding built into the browser so that it not only loads faster but works better.
    You still need to have the Adobe ActiveX plug-in and Adobe Flash Player for both browsers.
    I would also recommend you download Shockwave Player 11.
    IE8 has tried this as well, but it still has a couple bugs in it.
    If you have IE8 or FireFox 3.5 Beta 4, and you are still having problems, then I recommend that you go to www.windowsupdate.com and get all of the latest updates (including SP3), then try this fix again.
    Your auto-updater built into windows (If you even have it on) doesn't always pull down every update available for your computer. It only pulls down the manditory ones.
    Sometimes you HAVE to go to the website and manually get them yourself. I recommend when you go to the website, you click on custom install and pick every last one of them to install, which includes, hardware and software fixes for your computer.
    What a lot of people don't know is that when you have installed and tried all of the recommended fixes that Adobe gives you, and it still doesn't work, is that you are having registry conflicts within your Operating System (OS ex. WinXP, Vista, Linux, ect.), and that it is not the Adobe software at all.
    Those are usually repaired by making sure your computer stays up to date.
    The fact is the computer world is changing so rapidly that everyone can't keep up. You have to check for updates weekly.
    If you fall behind on those updates, then you start having problems with your computer and/or software.
    One problem then can turn into many and people get frustrated when something all the sudden just quits working.
    Take a day or two at least once a month, and make sure you update and maintain your computer.
    This includes disk defragmenting, disk cleanup, and making sure you have all the lastest updates.
    You can get to Disk Defrag, and Disk Cleanup by going to Start, All Programs, Accessories, then to System Tools.
    I would do Disk Cleanup first, then Defrag.
    I hope you take this advise into consideration, and that it is very helpful for you.
    If you find this useful, please come back and reply to this forum, and let everyone know so that others will be encouraged to do this.
    Thanks and goodluck, from another user like you.

  • List of issues and fixes for procure to pay process and order to cash process for a trading company

    Dear All Gurus
    Kindly tell me where I can find the list of all issues arising in procure to pay process
    and order to cash process and there fixes for a trading company in support project
    Thanking You
    Abdul Baseer

    Hi Abdul,
    There are no standard list to provide, you should identify the issue through regression testing and raise an SR or create a thread accordingly we can help you.
    Note:- Issues are vary to instance to instance, version to version, installation to upgrade etc..

Maybe you are looking for