Missing Workbook Variants on NW04's Upgrade

SAP has changed the way Workbook Variants are stored in BI70. Has anyone run into this problem during the upgrade? How did you conver these?

Hi Ken,
All pleasure was for me to help you.
I don't know much about BPS, but if you need to write a program even custom one, you surely need a Key,
You need develpper Key, to write a code custom or not,
Every time I need a key, I Usualy ask the Admin, thy generate the key on SAP service marketPlace
You have to transport your new objects created on Dev to Quality then Prod if you need them on these system othewise, just play with it in Dév, once you're done delete them
Hope it helps
don't hesitate for other questions

Similar Messages

Missing table variants in SE16N after upgrade from 4.7 to ECC 6.0

After Upgrade to ECC 6.0 ,certain variants for standard tables like MARA,MARC,EINE,EINA etc....in SE16N are missing.Can anyone help me to restore the variants.
Thanks in advance
Preethi .

If you didn't save them they are gone - you can't restore them if you didn't run the report before (from where do you want to restore?)
On top of that, if you have tables, that changed during the upgrade, the variants won't work any more.
I suggest you write a report or use queries to get your data instead of using SE16N.
Markus

Workbook Variants lost on change of query

All,
We have found that we lose our workbook variants when we modify the underlying query.
Does anyone know whether these can be recovered.
Regards
Nev

Hi Ravi,
Thanks for your reply - the answer is that I have created a workbook qith an underlying query that has been changed and saved as a new version - so the new query has no variants saved against it. The old query has all the missing variants of course.
I now have the problem of re-creating the old variants against the new query.
I wish I new how the underlying tables hang together then I could query them and get the variant dteails. I believe there are some abap classes which have methods to list variants as well - but as usual I'm up against time constraints and can't investigate these possibilities.
Regards
Nev

So im about to buy a mac pro, I just need help cause im not sure if it's worth paying more for instance, a hi-res screen compared to the stock screen, and will i really miss the .2 ghz and the upgraded video card if I get the 2.0 ghz mbp?

So im about to buy a mac pro, I just need help cause im not sure if it's worth paying more for instance, a hi-res screen compared to the stock screen, and will i really miss the .2 ghz and the upgraded video card if I get the 2.0 ghz mbp?

The_Tiger92 wrote:
So im about to buy a mac pro, I just need help cause im not sure if it's worth paying more for instance, a hi-res screen compared to the stock screen, and will i really miss the .2 ghz and the upgraded video card if I get the 2.0 ghz mbp?
It appears the 15" 2.2 ghz isn't worth spending $400 more for, but you get the 1GB Radeon 6750M that has four times the VRAM than the 15" 2.0Ghz model and about 167% more performance. High settings on all current games with over 50 fps.
If your not into 3D gaming or just light weight, then the 2.0 Ghz (last years performance) will suffice on low-medium settings at about 30 fps.
The 13" is rather poor as it has integrated graphics. 30 fps on only some games.
The high res screen is a excellent choice and the anti-glare is great for viewing just about anywhere.
No messy films to replace at $30-$40 a pop.
A lot of people bring the glossy screens back once they hear about the anti-glare.
http://www.pcpro.co.uk/blogs/2011/05/23/glossy-vs-matte-screens-why-the-pc-indus trys-out-of-touch/
Here's my 17"
In my opinion the extra $400 for another 2-3 years of use out of the computer is worth it.
Quad cores are more than enough for most uses for most people for many years, it's just a slow card is going to make the machine feel slow in rendering graphics in the future.

Long time WORKBOOK opening after technical system upgrade

Hi Gurus!
After BW technical upgrade (from 3.0B to 7.0) we have a problem with long time workbook opening (more than one minutes without refreshing workbook queries). After system upgrade we are still using BEx Analyzer 3.X version because our workbooks are not convert yet.
Thank you very much for your responses!

Good evening,
Have you looked into any of the SAP Notes for 3.x performance?
Check out Notes 1364801 & 1291789
These Notes may be helpful for you.
Regards,
Karen

I missed the xoom 3G to 4G upgrade cutoff date. can i pay for the upgrade?

Can i pay for a 3g to 4g upgrade for my xoom?

Oh no! I hate you missed out on the free 4G upgrade for the XOOM.
You may be able to call Motorola Tablet Support: 800-734-5870 to inquire if they will be able to upgrade it for you.
Tamara H.
Follow us on Twitter @VZWSUpport

Missing workbook text elements

Hello,
After upgrading to BI7 we are experiencing an issue with the missing text elements. We use workbooks with a sheet to receive the query and then a macro to reformat the query to user display form. The query sheet generally has a text element area and then a data area. When building the workbook we select the text element object and turn on all the text elements, this makes debugging easier and sometimes the text elements are used in the end report. Randomly after saving the workbook the text elements are turned off and on subsequent executions they are not displayed. The workbook then requires modifications to turn on the text elements, save the workbook and then transport.
Any thoughts would be appreciated.
Thanks,
Rick

Hello,
After some testing of the fixes that were applied we are still experiencing the issue with disappearing text elements.
Any additional information or recommendations would be appreciated.
Thanks,
Rick

Still missing content after 9.1.6 "upgrade" and content re-installs

I updated to 9.1.6 and immediately I noticed that various .aif files were missing, from my ESX24 instruments and Garageband loops.
After reading other peoples' similar stories and solutions here, I spent some hours (and probably $$ for all the bandwidth) downloading and re-installing "Garageband content" (which showed needed updating) as well as the "Essential" and "Additional" Logic content packages (which were supposedly already installed).
After downloading about 7GB of stuff, I am still missing content, .aif files which are part of ESX24 instruments and Garageband loops.
I guess I'll continue downloading and re-installing the rest of the Jam Pack content -- about another 10GB -- and hope that I get that stuff back. No guarantees though, I suppose.
Apple, this happened to me once before, when I upgraded from Logic Studio 8 to 9. It's really, really maddening.

You'll need to either manually copy over the old content, or download the media packs after you install the 9.0 version. In the Application menu, select "Download additional content...". However, do NOT click the "Select All Uninstalled" and instead download each part separately. A bit of added work, but selecting "Select all uninstalled"is giving people fits in that you end up with a lot of "Download Failed" messages and nothing installs.
HTH,
Tim

Missing workbooks

Howdy Gurus,
We have some workbooks that appear to have gone missing. These comprise about 4 workbooks from two totally unrelated infocubes that were working fine on Friday, and on Monday we cannot find them if we search for them in BEx. People that had run them in the past and had them in their BEx History get the following error when they try to run them from their History:
document store operation failed due to missing authorizations
Heres the troubleshooting Ive done so far:
I dont believe its an authorization issue because the user that got this error has the SAP_All profile, and when I look in SU53 for this user there are no authorization errors. People could run these workbooks fine a few days ago, and no changes were done to the roles since then.
I dont believe the workbooks have been deleted because we can find them if we look in the Metadata Repository, and one has a last changed date of a month ago.
These workbooks have been under development for the past couple of months directly in our production system, so there should be no transport issues.
Were running BW 3.5 on Oracle 10g.
Ive never run across this before, and Im not sure where I should look next. Can anybody point me in the right direction?
Thank you very much!

Hi,
when you did not transport any workbooks or queries how can you find them in prod.
If that is not the case check....
RSRWORKBOOK(table)- if you have workbook ID
RRMX_WORKBOOK_LIST_GET -function module
hope this helps you.....
Message was edited by: AVR - IGA

Camera Profiles Missing from Lightroom and ACR since upgrade to Lightroom CC

I upgraded to the latest version of Lightroom yesterday. I have discovered since then that the only profile available in the Camera Calibration profiles pop-up menu is Adobe Standard. This applies to Lightroom CC, Lightroom 5 and ACR. Furthermore the folder where the profles were stored is missing. This is a problem as I have lost a custom profile for editing the white balance in infrared photographs. What is the likelycause of this situation and how can it be remedied?

Hi Beat,
thank you very much for your reply! :-)
That is what I find so puzzling - there are hundreds of profiles in that folder under a "1.0" subfolder...
And yes, I'm sure it's RAW I'm looking at (and the error message appears before I see Lightroom, so it's not about RAW/JPG).
While fiddling some more I found out, that if I start Lightroom as an Administrator, everything is back to normal, but I never had to do this before and I don't see why this should be the case. What would cause such a behaviour to appear suddenly?
Rant:
The whole UAC idea - as Microsoft implemented it - is a major pain, but so far I was willing to bear the burden for the supposed raised security, but more and more I tend to think about switching it off as I did under Windows Vista. If it interferes with my ability to get anything useful done it's not worth it (and I have other software that doesn't like it, not just - suddenly - Lightroom).
Thanks for any hints what this problem could be about!
Cheers,
Thomas Helzle

Missing Pages documents after Snow Leopard upgrade

I upgraded my Mini to Snow Leopard and now several newer, previoulsy saved Pages documents are missing. They were on the machine before the upgrade and I thought they resided in the documents folder, which I backed up. However, they are not there now (looked at Time Machine when I did the original backup).
Any ideas as to where they could be? Older Pages files are there in the documents folder
Prior to the upgrade I blew away everything in "downloads" but these Pages documents were newly created on the desktop and should not have been saved there.

Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

Podcast image missing after iTunes 5.0.1 upgrade

After upgrading to iTUnes 5.0.1 the image associated with my podcast is missing. I have verified that the image still exists and that I can view it via a browser. Anyone else experience this?

I have the same problem in the iTunes Music Store Podcast Directory. I just noticed today that one of the two podcasts I manage suddenly has a missing image -- the other is fine. The image is still sitting happily on my server. Upgraded to iTunes 6 just now and the problem still exists.
I looked at the top 100 podcasts and see several with missing images -- This Week in Tech, Engadget, Nature Podcast...
Crazy and annoying! Here's the xml file for my podcast with (so far) a working image:
http://kayray.org/audiobooks/podcast.xml
and here's the one with the suddenly broken image:
http://kayray.org/audiobooks/librivox/librivox_podcast.xml
Am I missing something?
Kara

Missing stuff in iCloud since I upgraded my device

Very agrivated. I upgraded my iphone from a 4s to a 5 and some of my notes are missing from "Notes"... I signed in on my iCloud like I normally would, I had my phone backed up on iTunes on my Mac. I don't understand what went wrong. I need HELP!!!

Is there any indication of the specific folder you are having problems with. Are you logged in as the administrator (or the same as when you installed) and have anti-virus disabled during the update? You might also try the updates from http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows.

Change in Default Workbook Behavior with NW04s

We are upgrading from BW 3.x to BI. We use BEx workbooks exclusively. With 3.x, our query designers would create/edit a query through BEx Analyzer and the results would be shown in a workbook taken from the default workbook template. If the query needed further editing, it could be edited and the new results shown in the same workbook. This is what we are comfortable doing.
With 04s, if I run Query designer from within BEx analyzer, the created/edited query is not automatically "inserted" in the default workbook. I understand that I can add an analysis grid and define the query as a data provider, but this has to be done EVERY time the query is edited. I've added an analysis grid to the default workbook, but still the query has to be defined as a data provider every time it is edited.
Is this a problem for any one else? Do I just have to live with defining the data provider over and over again? How is it that if I use the SAP Standard as the default workbook, when I open a query, I don't need to define the query as a data provider?

Thank you for the reply. However, if I have an analysis grid in the default workbook, and I select Open Query, it doesn't automatically set up the selected query as the data provider. I have to go in and create a data provider. At that point, I can pick any query.
I can't set up a data provider in the default workbook, because each time I open a different query, the data provider will have to change.
If I use the SAP default workbook and select Open Query, it associates the selected query with the data provider automatically. I'd like the same kind of behavior, but with my default workbook.

Missing photos in Time Machine after upgrading to Lion 10.7.2.

After upgrading to Mac OS X LION 10.7.2. (11c74) all my photos are missing when I open TimeMachine.
There is only a iPhoto icon - NO PHOTOS.
Where are they? Heeeelp

olegz,
First, thanks for the clear graphics.
Authorization seems to be the hangup here. But instead of dealing with the complications of conflicts in authorization, which might take several weeks to months to iron out - site by site - I urge you to follow a different path.
It looks like you're using Chrome. For this site alone, use either Safari or Firefox, both of which are more likely to have plugins to deal with authorizing your site. Safari is already on your computer, but v.3 of Firefox is stable, too. Frankly, I can't tell you what specifically might be the problem here; but switching browsers will solve the immediate problem.
Sound good? Not so good? Post in this thread so that I or others can solve your problem once and for all!

Missing Workbook Variants on NW04's Upgrade

Similar Messages

Maybe you are looking for