Mobile Identification Number

Hi,
I have a requirement to identify the mobile device from its specific identification number. I have studied the differences between MIN, MDN, IMEI etc.
Is that possible to get the identification number in j2me core.
Any ideas ?
rizzz86

Rizz86,
Below is (found on the net) how to get IMEI for some handset vendors.
Looking at it, everyone uses some form of imei in the name of the property, so maybe getting all properties and enumerating through all searching for case-insensitive imei would simply work on most if not all handsets...
I am not sure, whether retrieving MIN or MDN numbers is possible and whether it makes much sense. MDN is not stored within the phone but mapped to the SIM card and MIN is definately stored by the operator.
Please also keep in mind that 10% of IMEI numbers out there might be duplicated, so you might get exceptions now and then.
Anyway, here is the list:
Nokia
      System.getProperty("phone.imei";);
      System.getProperty("com.nokia.IMEI";);
      System.getProperty("com.nokia.mid.imei";);Note ; Requires signed midlet. S60 3rd edition device does not requires signing for this to work.
Sony-Ericsson
  System.getProperty("com.sonyericsson.imei";);Note ; might not work on all model, YMMV
Motorola
System.getProperty("IMEI");
      System.getProperty("com.motorola.IMEI";);
Samsung
System.getProperty("com.samsung.imei";);
Siemens
System.getProperty("com.siemens.imei";);Good luck!
Daniel

Similar Messages

  • Identification number

    I set an identification number on my skype account. It's the number of my mobile phone.
    Now, for some reasons, I think that would be better to put my landline number as the Skype identificator number. I changed it in my profile, but it continues appearing my mobile phone when I call someone.
    What do I have to do?

    On personal account you can only add either mobile or Skype Online Number as your caller ID.
    More information on caller ID:
    http://www.skype.com/intl/en-us/features/allfeatures/caller-identification/
    Adding your landline number on Skype profile will not activate it as caller ID.
    Maybe in the future it is possible.
    Andre
    If answer was helpful please mark it with Kudos and if issue is resolved mark it with solution. This will help other users find this answer more easily. Thanks in advance!

  • Call identification number not activated

    Hi guys,
    It`s already 1 week since I bought credit and I asked for the call identification number.
    I have tried several times but without any success or error message.
    It`s very important to have this number otherwise my friends will not answer to my `private or 0000011` phone number.
    Thanks. 

    FDH wrote:
    I am wanting to use my Japanese contact number for my CALLER ID but there is no country code (+81) available in the drop down menu. Is there some other way to enter this as there is an obvious oversite by Skype in leaving out Japan in this field.
    Skype can't use a Japanese number as Caller ID. Online Numbers from a few countries (Chile, Denmark, Estonia, Hong Kong, Poland, Sweden, the UK and the US) can be used as Caller ID, and Japan is one of the two countries (the other is Mexico) where a mobile number can't be used as Caller ID when calling from Skype. 
    Patrick
    Location/Ubicacion: Arizona USA
    Time Zone/Hora Local: UTC/GMT -7
    If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
    Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
    I am not a Skype employee. No soy un empleado de Skype.

  • TS4006 my mobile was stolen 2days before. please find my iphone and give the location. my mobile IMEI Number is - 012854005421769

    Dear Sir,
    my mobile was stolen 2days before. please find my iphone and give the location.
    my mobile IMEI Number is - > 012854005421769
    this is my mobile user name - > VINOTH P
    country  - > india
    state - > tamil nadu
    City - > chennai
    Mobile Phone Bill Details :
    Apple Iphn 8gb #GS Airtel BLK
    166104 U4
    CSH N N  Purchasing Date ( 01-01-2012 )
    Please i am very critical situation now, My Business is very down. please help me sir.

    You aren't talking to Apple here. This is a user to user technical help forum.
    Apple will not find your phone.

  • What is the use of Withholding tax identification number field?

    Hello SAP Experts,
    I posted this question earlier but had to close because of no replies from anybody. Posting it again to see if I am lucky to get some answer this time.
    Can someone tell what is the use of field Withholding Tax Identification Number? Does it help with the reporting? Where does it get populated on the report if given at vendor or master record or within the withholding tax customization for company code? What is the difference between creating it in the customization for withholding tax information for company code and vendor/customer master record?
    As per SAP:  Withholding tax identification number
    This is a number issued by the tax authorities per withholding tax type.
    This number must be specified in Customizing either:
    (a) As part of the withholding tax information defined for the company code, or
    (b) As part of the withholding tax information defined in the customer or vendor master record.

    Hi Pete,
    The only thing that I could check is the content used in US:
    See content of this field for US:
    LFA1-STCD1      Social security number
    LFA1-STCD2      Employer identification number
    LFBW-WT_WTSTCD  Withholding tax identification number for WT Type
    In order to populate it, please kindly check the following:
    The reason why you cannot fill in the field WT_WTSTCD in transaction
    Fk02 however you can do it in XK02 (Change vendor centrally) can be due
    to wrong customizing of the field status group.
    Kindly check the following:
    SPRO->
    Finantial accounting -> Accounts receivable and accounts payable ->
    Define screen layout per activity (vendors) -> Change Vendor(Accounting)
    Company code data -> W/holding tax data, w/h tax 2 ->
    FIELD Withholding tax code,w/h tax 2 will be probably just available to
    display. Please, change it to optional entry.
    I hope I could be of assistance.
    Kind Regards,
    Fernando Evangelista

  • How to move iMessage account to different mobile phone number

    Hello
    I am going to change mobile phone number and I would like to know how
    1) move iMessage/faceTime to this new phone number
    2) how to transfer the "history" (old messages) from my old phone number to the new one
    thx

    Hello, matteos72. 
    Thank you for visiting Apple Support Communities.
    Make sure that your new number is updated in Settings > Phone > My Number.  Once this done, follow the steps in the quoted section below.  Next, sign back into iMessage and FaceTime.  The history will not be modified as no data is deleted. 
    Unlink a phone number
    To remove a phone number from an Apple ID, sign out of FaceTime and Messages on your iPhone:
    Settings > Messages > Send & Receive. Tap your Apple ID, then tap Sign Out.
    Settings > FaceTime. Tap your Apple ID, then tap Sign Out.
    This should remove your phone number from other devices using the same Apple ID with FaceTime and Messages. If the phone number is still available on other devices after you sign out of FaceTime and iMessage on the iPhone, you may need to sign out of iMessage and FaceTime on all your devices, then sign in to FaceTime and Messages again on devices you want to use.
    Note: If you no longer have access to the iPhone that is using the number you want to remove, reset your Apple ID password.
    iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    Cheers,
    Jason H.

  • CUCM Mobility/Single Number Reach is not working correctly

    Hi,
    I'm experiencing difficulties with the CUCM Mobility (Single Number Reach) function.
    For a customer of mine, I'm busy setting up the Mobility/Single Number Reach which is designed as follows:
    - Users have a 4 digit DN that is attached to their User Device Profile so that they can use Extension Mobility.
    - Those same users also have a Remote Destination Profile with a Remote Destination (to a mobile number) attached to their DN.
    All has been set but as I was testing a couple of DNs, I noticed that a some numbers could be called to both their DN and Remote Destinations while others could only reach their DN.
    As an example I have configured DN 6380 with the correct CSS (which permits to call to mobile phones and national numbers) to a User Device Profile.
    That same DN is also connected to a Remote Destination Profile with a configured Remote Destination, which also has the same CSS.
    The End User that is needed to login into Extention Mobility is 6380.
    The settings on the Remote Destination are to ring always and all the time.
    All Remote Destinations have the "Line Association" active.
    Each DN has a value of 3 in maximum number of lines field.
    Their Remote Destination profile has a value of 2 in maximum number of lines.
    With this particular user, I'm sure that I have the right mobile number.
    I already found out that the numbers that are having this problem, do not make a call to the PSTN and mobile network when their DN are called.
    So I think the problem is within CUCM.
    Can somebody help me?
    Many thanks in advance!
    The version of call manager is 8.6.2.20000-2.

    I did a debug isdn q931 on the voice router which is connected to the PRI circuit.
    A couple of test calls later and this is the output I got:
    Jun 28 08:34:15.737: ISDN Se0/0/0:15 Q931: RX <- SETUP pd = 8  callref = 0x0E5A
            Bearer Capability i = 0x8090A3
                    Standard = CCITT
                    Transfer Capability = Speech
                    Transfer Mode = Circuit
                    Transfer Rate = 64 kbit/s
            Channel ID i = 0xA18382
                    Preferred, Channel 2
            Calling Party Number i = 0x2183, '51365XXXX'
                    Plan:ISDN, Type:National
            Called Party Number i = 0xA1, '88777XXXX'
                    Plan:ISDN, Type:National
            Sending Complete
    Jun 28 08:34:15.749: ISDN Se0/0/0:15 Q931: TX -> CALL_PROC pd = 8  callref = 0x8E5A
            Channel ID i = 0xA98382
                    Exclusive, Channel 2
    This company has 200+ Mobility users so I did a random check.
    Strangely enough, the one I described in my first post is now reachable on both his DN and mobile phone.
    This is 4 digit number was the only one though.
    Jun 28 08:09:20.557: ISDN Se0/0/0:15 Q931: RX <- SETUP pd = 8 callref = 0x00A6
           Bearer Capability i = 0x8090A3
                   Standard = CCITT
                   Transfer Capability = Speech
                   Transfer Mode = Circuit
                   Transfer Rate = 64 kbit/s
           Channel ID i = 0xA18382
                   Preferred, Channel 2
           Calling Party Number i = 0x2181, '51365XXXX'
                   Plan:ISDN, Type:National
           Called Party Number i = 0xA1, '88777XXXX'
                   Plan:ISDN, Type:National
           High Layer Compat i = 0x9181
           Sending Complete
    Jun 28 08:09:20.569: ISDN Se0/0/0:15 Q931: TX -> CALL_PROC pd = 8 callref = 0x80A6
           Channel ID i = 0xA98382
                   Exclusive, Channel 2
    Jun 28 08:09:20.573: ISDN Se0/0/0:15 Q931: TX -> SETUP pd = 8 callref = 0x2345
           Sending Complete
           Bearer Capability i = 0x8090A3
                   Standard = CCITT
                   Transfer Capability = Speech
                   Transfer Mode = Circuit
                   Transfer Rate = 64 kbit/s
           Channel ID i = 0xA9839C
                   Exclusive, Channel 28
           Display i = 'Testnummer'
           Called Party Number i = 0x80, '51365XXXX'
                   Plan:Unknown, Type:Unknown
            Redirecting Number i = 0x00008F, '088777XXXX'
                   Plan:Unknown, Type:Unknown
    I did a Remote Destination Profile export of all records with a Remote Destination attached to it and then re-imported them in CUCM.
    The last output of the call to the mobile phone was not appearing last Thursday.
    Apparently, the export and import of the profiles and destinations did change something within CUCM.
    Could this be a bug in CUCM?

  • Classifier mapping to read Sender & Receiver  Identification Number from XML. How to handle in B2B Add on

    In current See burger tool, We have this functionality to read Sender and Receiver Identification number from the XML. Is there any way in b2b add on to do this.

    Hi,
    The classifier within the Seeburger context is being used to call your parent mapping, in case you want to dynamically determine your mapping, based on data in the UNB/UNH segment.
    Within the B2B add-on, there is no need to.
    Only use module localejbs/EdifactConverterModule in case you want to convert to or from EDI.
    You have a specific requirement or do you want to test something out?
    Kind regards,
    Dimitri

  • How to get Account identification number in a ZVIEW ( Empty View )

    Hi  ,
    I created a  ZVIEW in  component ICCMP_BT_IRHIST from an existing standard view in this component im navigating to ZVIEW. In the Zview i want to get the account identification number.In the ZVIEW
    I am writing this part of code
    <%
    data: lv_account_name type string,
            lr_entity       type ref to cl_crm_bol_entity,
            lr_cuco         type ref to  CL_CRMCMP_B_CUCOBUPA_IMPL,
            lv_account_id   type string,
            lv_account_type type string.
      TRY .
            lr_cuco  ?= controller->get_custom_controller( 'CRMCMP_BPIDENT/CuCoBuPa' ).
        CATCH cx_sy_move_cast_error.
          RETURN.
      ENDTRY.
      check lr_cuco is bound.
      lr_entity ?= lr_cuco->typed_context->SEARCHCUSTOMER->collection_wrapper->get_current( ).
      check lr_entity is bound.
      lv_account_name = lr_entity->get_property_as_string( iv_attr_name = 'BP_NUMBER' ).
    %>
    eventhough lr_cuco is bound lr_entity is not getting populated.
    as a result im not able to get the account identification number in the ZVIEW.
    Any suggestions on this ...................
    Regards,
    Sijo.......
    Edited by: sijokjohn85 on May 7, 2009 3:12 PM

    HI,
    I have a similar kind of Issue and would like to k now How you resolved the issue.
    I have two standard components, I am trying to read the custom controller of Component-1 in component-2.
    The Object is bound but the value is empty, Similar to what you experienced.
    Any tips will be really helpful.
    Cheers..

  • I have an Ipad2 and my daughter has Iphone 4s and I would like to have all SMS and IMessages duplicated on the IPAD2 I was told I could do this by typing in the mobile phone number into the IPAD2 some where in the settings.

    I have an Ipad2 and my daughter has Iphone 4s and I would like to have all SMS and IMessages duplicated on the IPAD2 I was told I could do this by typing in the mobile phone number into the IPAD2 some where in the settings.

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    iOS: FaceTime is 'Unable to verify email because it is in use'
    http://support.apple.com/kb/TS3510
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
    http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Troubleshooting iMessage Issues: Some Useful Tips You Should Try
    http://www.igeeksblog.com/troubleshooting-imessage-issues/
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    http://support.apple.com/kb/TS3970
    How to Block Someone on FaceTime
    http://www.ehow.com/how_10033185_block-someone-facetime.html
    My Facetime Doesn't Ring
    https://discussions.apple.com/message/19087457
    To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
    How to Send SMS from iPad
    http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
    You can check the status of the FaceTime/iMessage servers at this link.
    http://www.apple.com/support/systemstatus/
     Cheers, Tom

  • CRM BP Identification number entries (Identification tab) from CRM to ECC

    Hi,
    I have a requirement to map the CRM BP Identification number entries (under Identification tab) from CRM to ECC alongwith BP flow from CRM to ECC.
    1. Is it mapped by standard framework and do we have any view in ECC customer master to display the identification numbers?
    2. If not, Is it stored in some table in ECC?
    Please suggest,
    Thanks.

    Hi,
    Were you able to resolve this as I am looking to do the same thing? From my investigation, I can't see anything standard that would transfer this data, although it does look like the Identification number is held within the BDoc.
    I assume the solution would be to map the field into an XD01 field (either a bespoke field or standard - we are planning to use Corporate Group) but i'm not sure how to progress this... I have found some FM's in table CRMSUBTAB which look like the right sort of thing so that is my next area to investigate.
    Please let me know if you have managed to solve this some other way!
    Cara

  • BP Identification Number Authorisation

    Hi All,
    My requirement is to hide certain Identification Numbers based on ID TYPE in BP from certain users. I can't seem to do this with standard Auth Objects.
    As standard there seems to be two options:
    1. Use the Field Group Auth object B_BUPA_FDG, but this hides the whole field, it is not possible to specify which ID Types are visible to the user.
    2. Use Auth Object B_BUPA_ATT by maintaining a Authorisation Type for the ID Type field in customizing. This doesnt meet the requirement because if the auth fails then the user cannot display the BP at all, not just the specific field.
    I have read this thread and it seems to work in the same way as 2 above.
    BDT and event AUTH1
    Has anybody else done something similar to what I am trying to achive?
    Thanks,
    Sam

    Hi,
    Were you able to resolve this as I am looking to do the same thing? From my investigation, I can't see anything standard that would transfer this data, although it does look like the Identification number is held within the BDoc.
    I assume the solution would be to map the field into an XD01 field (either a bespoke field or standard - we are planning to use Corporate Group) but i'm not sure how to progress this... I have found some FM's in table CRMSUBTAB which look like the right sort of thing so that is my next area to investigate.
    Please let me know if you have managed to solve this some other way!
    Cara

  • How to detect mobile phone number???

    Hi,
    Is there a way to get phone number somehow? well what i m trying to do is, connect a web site from mobile and fill some fields (may be send picture to this page). While connected to this page, i want to detect and keep this mobile's number. Any suggestions??
    thanks in advance.

    gimbal2 wrote:
    I can only guess, but generally it is in the line of "because you won't use it legally" that information is kept hidden from you.No, it's not really that. IIRC some manufacturers have a proprietary Java ME API for some models that lets you access the IMEI. And all handsets have a code that can be entered via the keypad to display the IMEI.
    To expect to be able to access it using Java SE is more than absurd.
    db

  • Mapping of Identification Number Categories for Business Partners

    Hi people!!!
    I´m working with the table BPIDCONV on Solution Manager, which is the table of Mapping of Identification Number Categories for Business Partners.
    Somebody knows how create an entry on this table?
    I suppose that is on Customizing.
    Is very very urgent, please.
    Helpful answers will be rewarded.
    Thanks and regards,
    Manuel.

    Hi,
    The tax category of all the countries are stored in Table TFKTAXNUMTYPE
    and it is a standard SAP delivered table and should be identical in all
    our customer systems.Table TFKTAXNUMTYPE is governed by the legal
    requirements and hence SAP provides Tax category for only those
    countries which have defined legal requirement for maintaining that
    particular Tax number to keep system legally complaint.
    Please find the note 775919 which comprises of all the available
    Tax types to our customers which are delivered by SAP.
    I hope this information is usefull and help you to resolve your
    query.Feel free to get back to me if you have any issue further.
    Regards,
    Tauseef Ahmad

  • How to fetch Mobile phone number of shipto?

    Hello Gurus,
    In showbusinesspartner.jsp, along with all the details like name,telephone number i want to show mobile phone number also. I am not able to find any method to fetch it. If any of you have some idea of how to fetch it, please help me.
    Thank you
    Lakshman

    HI
    u can get this info from the request header
    String mobile=request.getHeader("msisdn");
    also all the info regarding the mobile is get from
    request.getHeaderWhen an incomming call arrivies, the midlet goes in the background until the call ends. How do you expect to get the msisdn? What is the connection between the request object and the incoming call? I think you are refering to the part where you open a connection from the mobile phone through an application to a server side.
    Mihai

Maybe you are looking for

  • Very urgent regarding ALV

    Hi all, I have displayed data in alv.and the error condition is that if for a material if it has more than one S as ok_status records then it should throw an error. This logic is working fine. Now suppose at first time user had entered S through keyb

  • How do you configure multiple appservers in iisproxy.ini?

    I am coming from the WebSphere world, and trying to figure out this whole WebLogic thing. The problem I am having is for the weblogic plugin for IIS. In WebSphere, the plugin was proxied by path and port #. I setup an iisproxy.ini and got it working

  • Site not showing correctly in IE

    My website isn't showing correctly in IE. It's here: www.renewretreats.co.uk The bottom photo on the homepage overlaps the text. And on the Who Are We? page - the text is creeping up under the small photos. It's fine in iWeb editor - and also fine in

  • Java.lang.NullpointerException when use source table as a mapping component

    Hi all, I am new to owb and I got NullPointerException when I try to drag a table to my mapping. The table is imported and it's from a windows oracle database. The mapping is located on my linux oracle database. By the way, I can even deploy the tabl

  • N-ary Trees non-recursive traversal algorithms

    Hi, Non-recursive traversals are needed when you are unsure how big the tree's will be. So far all the algorithms I have seen either use their own internal stack or threading to climb back up the tree. Here's my attempt that seems to work but I would