Modifying a message in error segment of an idoc

Hi,
I want to modify the error message that is getting displayed in the error segment of an idoc. It is coming form a standard message class and while debugging it was found that the control is going into a standard function which is used for generating a tranfer order . Is it possible to modify the message ? I  know the mesaage class(Standard) and the mesaage number as well.

Hi ,
Try this.
You may be using a structure to populate the idoc status. Check that structure, there will be an option to give the message class and message number.
Regards,
Sharin.

Similar Messages

  • Modify the messages in error page.jsp

    Hi All,
    I am using error page for exception handling and using the statement
    LOG.error("dpm Exception", exception);
    But due to this my performance of the program is getting degraded.
    For example if the user is not authenticated to view a particular peice if info and there are many users of such category then the exception keeps on showing which covers all the logs and is too big.
    Is there any way by which i can limit the exceptions to 2-3 lines .
    Please help.
    Thanks In Advance
    MB

    newbie_java123 wrote:
    Is there any way by which i can limit the exceptions to 2-3 lines .try custom exception..
    it may help you..
    [link 1|http://www.seasite.niu.edu/cs580java/testexception.htm]

  • IDOC : navigation to the errored segment ...IMPORTANT

    Hello all...
    In transaction BD87 ...if a user selects a particular errored out IDOC (with status 51) with some error ina segment ( lets say segment 3) and  clicks on it..
    I need to take him directly to the errored SEGMENT  3 screen(<b>Display data record</b> <b>for IDOC screen</b>)  ...
    i need to skip all the screens in between,which he has to navigate to reach the segment...
    how can i do it?
    I had to copied RBDMON00 program( BD87) into my z program...now i need to find out the way to go to errored segment directly based on segment number displayed skipping the navigation screens in between....
    Hope u got my question...
    Thanks...

    Hi Aday,
    Please check this FM EDI_DOCUMENT_TREE_DISPLAY.
    I am afraid there is no standard FM available to get the error segment of an IDoc. Perhaps you may want to write your own codes to go to table EDID4 to get the corresponding segment.
    Regards,
    Ferry Lianto
    Message was edited by:
            Ferry Lianto

  • How to modify display label in error message raised from capi?

    How to modify display label in error message raised from capi?
    qms_transaction_mgt.process_rule_violation
    ( p_br_name => 'BR_PBR_DEL006'
    , p_msg_code => 'PMS-00417'
    , p_display_label => display_label
    , p_table_name => 'pan_project_members'
    , p_table_rowid => get_rowid
    regards,
    marcel

    When you mean which columns are displayed, this is actually quite easy.
    Display_label will display by default the unique key columns, or if no unique key exists, the primary key. To overrule this behaviour, you have to specify the columns you want to display by assigning them a 'descriptor sequence'.
    For example, to display the ename on EMP warnings, assign descriptor sequence 10 to the EMP.ENAME column and regenerate the CAPI package.
    Jeroen van Veldhuizen

  • EDIFACT D98A Inbound Message Processing Error

    Hi
    I have been setting up an EDI B2B G/W using 11g B2B PS3 (Host & Partner). I have created the ECS, XSD and XML files using the B2B Document Editor and have completed the partner setup for D98A Purchase Order.
    I had the issues when I posted the PO where the Host is unable to pick up the agreements and I was getting B2B-51507 Payload Validation Error and the message was failling at the B2B Host.
    Later I changed the payload in-line with the below thread and removed the Internal Properties
    https://forums.oracle.com/forums/thread.jspa?messageID=11039032#11039032
    upon which the messages was sent to RemoteTP but failed with B2B-50037: B2B inbound message processing error
    When I analyzed further I could see the InternalPropertes sent by the Host to the RemoteTP are with empty values.
    I would like to understand the point of removing the InternalProperties and why B2B Host is not sending it in the right format to the other B2B.
    I am pasting the file that is been received at the RemoteTP which failed with B2B-50037: B2B inbound message processing error
    <?xml version="1.0" encoding="UTF-8"?><Transaction-CONTRL xmlns="urn:oracle:integration:b2b:9FF110DDDB0C424F8B4C5A0F73EF6547" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" XDataVersion="1.0" Standard="EDIFACT" Version="D3" CreatedDate="2013-05-31T13:41:20" CreatedBy="XEngine_2133" GUID="{65236268-C9EF-11E2-BC04-E4115BAD2692}"><Internal-Properties><Data-Structure Name="Interchange"><Lookup Name="InterchangeControlVersion">1</Lookup><Lookup Name="InterchangeReceiverID"> </Lookup><Lookup Name="InterchangeReceiverQual"></Lookup><Lookup Name="InterchangeSenderID"> </Lookup><Lookup Name="InterchangeSenderQual"></Lookup><Lookup Name="Standard">EDIFACT</Lookup><Property Name="InterchangeSyntaxVersion">1</Property><Property Name="ReleaseCharacter">0x3f</Property><Data-Structure Name="Group"><Lookup Name="GroupID">CONTRL</Lookup><Lookup Name="GroupReceiverID"> </Lookup><Lookup Name="GroupReceiverQual"></Lookup><Lookup Name="GroupReleaseNumber">3</Lookup><Lookup Name="GroupSenderID"> </Lookup><Lookup Name="GroupSenderQual"></Lookup><Lookup Name="GroupVersion">D</Lookup><Property Name="GroupID">CONTRL</Property><Data-Structure Name="Transaction"><Lookup Name="TransactionID">CONTRL</Lookup><Lookup Name="TransactionMessageReleaseNumber">3</Lookup><Lookup Name="TransactionMessageVersionNumber">D</Lookup></Data-Structure></Data-Structure></Data-Structure></Internal-Properties><Segment-UNH><Element-0062>#ControlNumber(Transaction)#</Element-0062><Composite-S009><Element-0065>CONTRL</Element-0065><Element-0052>D</Element-0052><Element-0054>3</Element-0054><Element-0051>UN</Element-0051></Composite-S009></Segment-UNH><Segment-UCI><Element-0020>1051</Element-0020><Composite-S002><Element-0004> </Element-0004></Composite-S002><Composite-S003><Element-0010> </Element-0010></Composite-S003><Element-0083>4</Element-0083></Segment-UCI><Loop-Group_3><Segment-UCF><Element-0048>1051</Element-0048><Composite-S006><Element-0040> </Element-0040></Composite-S006><Composite-S007><Element-0044> </Element-0044></Composite-S007><Element-0083>4</Element-0083></Segment-UCF><Loop-Group_4><Segment-UCM><Element-0062>1</Element-0062><Composite-S009><Element-0065>ORDERS</Element-0065><Element-0052>D</Element-0052><Element-0054>98A</Element-0054><Element-0051>AA</Element-0051></Composite-S009><Element-0083>4</Element-0083><Element-0085>18</Element-0085></Segment-UCM></Loop-Group_4></Loop-Group_3><Segment-UNT><Element-0074>5</Element-0074><Element-0062>#ControlNumber(Transaction)#</Element-0062></Segment-UNT></Transaction-CONTRL>
    Has anyone encountered such issues? Is there any additional properties that are needed to be configured?
    Regards
    RD

    Hi Anuj
    this is the stack trace
    <02-Jun-2013 12:50:47 o'clock BST> <Error> <oracle.soa.b2b.engine> <BEA-000000> <Error -: B2B-50037: B2B inbound message processing error
    Error -: B2B-50037: B2B inbound message processing error
    at oracle.tip.b2b.engine.Engine.processIncomingMessageImpl(Engine.java:3283)
    at oracle.tip.b2b.engine.Engine.processIncomingMessage(Engine.java:1764)
    at oracle.tip.b2b.engine.Engine.incomingContinueProcess(Engine.java:4179)
    at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3855)
    at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:3328)
    at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:610)
    at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:192)
    at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
    at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:183)
    at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
    the xml i posted is the one that is logged by the remote TP in the trace logs before the error occurrence,
    Regards
    RD

  • How to find out error segments in a group of Idocs

    Hi,
    1. For every 5 minutes Idocs are coming in to R3 from some third party systems, and this scenerio some of the Idocs are in failed status as well.
    My doubt is how to see the all segments at a time, since there might be some problem with the data, so I need to check the each and every segment all time.  Is there any way to findout all segments at a time for the group of the idocs of the same message type.
    2. How to find out the error in segments of the idoc.
    Many thanks in advance.
    Thanks.
    Ahmed.

    Hi Mujeeb Ahmed 
    I dont have SAP System in front. Any way check the menu bar, there you can fine SEGMENT WITH ERROR OPTION
    Regards
    Kumar

  • Exception text in error segment of the header

    Hello All,
    It is well documented in SDN on how to add trace messages and then raise an runtime exception error that will stop message mapping process.
    References:
    /people/alessandro.guarneri/blog/2006/01/26/throwing-smart-exceptions-in-xi-graphical-mapping
    /people/sap.user72/blog/2005/02/23/raising-exceptions-in-sap-xi-mapping
    The exception text can be extracted from the Trace segment in SXMB_MONI. This is an acceptable way but not the best one. The "error information" button only indicates to the exception but one needs to dig out the text from the trace section.
    The ideal scenario would be to be able to write to the error segment of the message header (for e.g. "Additonal Text" section).  Has anybody worked on this / what are the mechanisms to achive this from UDF/Java functions.
    Regards,
    Varadharajan.

    Interesting Requirement. If you can figure a way out, believe me this is worth a Blog on SDN
    Meanwhile, Can you have a look at my blog and check if this can help you as a workaround,
    /people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
    Regards
    Bhavesh

  • Error when segment of an IDOC is edited in we31

    Hi All,
    I want to edit an segment of an idoc in we31, I want to add new fields to a segment. When I try to do this i get an error message "Segment type E1BP****** is flagged as generated". How can i edit the segment in this case now?. Is there any customizing related to it.
    When i see this segment type in table EDISEGMENT, it is marked as generated (field generated is set to X)
    Edited by: Devendra A M on Feb 5, 2009 7:03 AM

    I guess you can do one thing ... you can CANCEL RELEASE the segment and then make necesasry changes and then again RELEASING the segment.
    you can also visit this link
    http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
    in that you go to the "Change Segment" sub-topic.
    Edited by: Premal Mistry on Feb 5, 2009 11:47 AM

  • Error messages and error numbers

    Hi,
    Anybody know where can I get list of Error messages and Error numbers for Oracle Provider OLE DB.
    Thanks.

    Thanks for your help.
    We're using the same user and the environment isn't explicitly modified through ALTER SESSION or log-on triggers etc. However I was thinking it might have to do with different drivers: perhaps the JDBC driver used by OraAS 10g has creates a different environment than when connecting with SQL*Plus.
    I haven't opened a TAR with Oracle yet. We're currently in the middle of working out what we want (and paying for ;-) our support contract.

  • Converting Warning Message to Error Message in Benefits Enrollment Screen

    Hello SAP,
    How to convert Warning Message to Error Message in Benefits Enrollment Annual Enrollment Screen.
    Warning Message: No beneficiaries selected for plan XXXX.
    As per my requriement, there is one warning message which is popping up when all the plans total donot count to 100 %. At that time we need to show a Error message instead of Warning Message. Now warning message is displayed.
    Reason: Insurance plans require error message when beneficiaries donot total to 100%
    My question is in which message class or in which Table these messages are maintained and how to modify it.
    Thanks,
    Sankar Narayana

    which badi you are using?
    You cant use all methods to raise a error message
    for example
    Error_table of the method CHECK_DEPENDENTS of user exit PBEN0032 should
    olny be used to raise configuration errors. Please use
    CONSISTENCY_ERRORS to display any error message[move the content of
    error_table to consistency_errors and clear the error_table inside the
    method CHECK_DEPENDENTS].

  • Cant open itunes. get error message 7 followed by error message windows error 127.     i have redownloaded new updates with luck.   window xp

    cant open itunes. get error message 7 followed by error message windows error 127.     i have redownloaded new updates with luck.   window xp

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • SAP System Message: Syntx error or generation error in a screen

    dear sap basis gurus,
    i am currently having problems signing on to our DEV server. i get this error message:
    <SID>: SAP System Message
    Syntx error or generation error in a screen.
    it won't let me log on.
    there were no changes made on the server (i.e., profile parameters) lately. it was working really fine after our support package level upgrade about 5 months ago.
    have you encountered this problem before? please help me as there we have two imminent go-lives.
    thank you very much in advance.
    best regards,
    albert

    hello nick, ashok,
    thank you very much for your responses.
    i have already resolved this issue by just freeing up some space from our disks. not one of them was full though.
    i hope i would no longer encounter the error message.
    again, thank you.
    best regards,
    albert

  • I get error message "unknown error" When trying to log on to itunes via pc, help please!

    I get error message "unknown error" When trying to log on to itunes via pc, help please!

    Hello, trolle56.
    Thank you for the question.  You may find these articles helpful in troubleshooting the error received with the iTunes Store. 
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/ts3297
    Cheers,
    Jason H. 

  • I keep getting this error in Dreamweaver when I am trying to upload my website?  Can you tell me what I am doing wrong?  here is the error message: /html - error occurred - Unable to create remote folder /html.  Access denied.  The file may not exist, or

    I keep getting this error in Dreamweaver when I am trying to upload my website?  Can you tell me what I am doing wrong?  here is the error message: /html - error occurred - Unable to create remote folder /html.  Access denied.  The file may not exist, or there could be a permission problem.   Make sure you have proper authorization on the server and the server is properly configured.  File activity incomplete. 1 file(s) or folder(s) were not completed.  Files with errors: 1 /html

    Nobody can tell you anything without knowing exact site and server specs, but I would suspect that naming the folder "html" wasn't the brightest of ideas, since that's usually a default (invisible) folder name existing somewhere on the server and the user not having privileges to overwrite it.
    Mylenium

  • After the most recent FF update, FF 3.6.6 will not load, citing the error message: "XULRunner / Error: Platform version '1.9.2.3' is not compatible with minVersion =1.9.2.6 / maxVersion". Tried updating XULRunner with no luck. Downloaded fresh copy and

    After the most recent FF update, FF 3.6.6 will not load, citing the error message: "XULRunner / Error: Platform version '1.9.2.3' is not compatible with minVersion>=1.9.2.6 / maxVersion". Tried updating XULRunner with no luck. Downloaded fresh copy and installed. Still no luck.
    == This happened ==
    Every time Firefox opened
    == FF updated to 3.6.6 ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

    Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    You can skip the step to create a new profile, that is not necessary for this issue.
    See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Maybe you are looking for