Module not loading at startup + logs

I am having a problem getting my rtl8187 module to load at startup. This is my wireless driver. At startup my wireless refuses to work. I check my modules "lsmod" and the rtl8187 module appears to be loaded. However my wireless only starts working after I remove the module and then reload it.
Can somebody tell me where I can find the log that will tell me whats going on with this module at startup.
BFC

Can somebody tell me where I can find the log that will tell me whats going on with this module at startup.
You say the module gets loaded, as does lsmod. So there will be no error message, as the system thinks the module is working(which it probably is). The reason your wireless is not working may be another issue. In order for some things to work correctly certain things need be loaded before other things can access them.
anyway, all error logs are in /var/log, shouldn't take you long to look through them. They are dated.

Similar Messages

  • Floppy module not loading at startup

    On OL6, I noticed that the floppy module is not getting loaded when I am running the base (red hat) kernel, but it does when I am running the uek kernel. Can someone explain why this is happening?

    I'm just trying to figure out why the floppy module is automatically loaded with one kernel (oracle kernel in this situation), but it is not with another (red hat kernel in this situation). When I run modprobe floppy, it sees the drive right away and I'm able to mount it without any problems. If it is because one kernel detects the floppy drive and the other one doesn't, why is that happening? What is different about the 2 kernels that causes them to handle the floppy drive differently?

  • Error When Publishing "no access to internet (internet module not loaded)"

    When publishing a site in GoLive 9 I get the message""no access to internet (internet module not loaded)".
    i've never had this problem before, this just started happening and cant figure out how to get it to work again. it's weird because i can connect to my ftp server from the file menu and the internet module is checked on in my preferences. i've tried creating a new site file for my webpages and reinstalling GoLive and nothing has worked.
    has anybody had the same problem? thx!

    ha, ok i just figured it out. i didn't have the proper ftp setting in the publish preferences. i hadn't changed the info in the "server name" from the place holder text that was automatically inserted. that's a strange error message to display for that!!!

  • Cuda driver not loaded as startup item in mountain lion any solution ?

    cuda driver not loaded as startup item in mountain lion any solution ?
    i use a softare that need nvidia cuda driver installed on system

    Hi,
    the NFSv4 domain name is not necessarily related to the host name or the host's fully-qualified domain name (FQDN). It can be the same like the domain name, but it does not have to.
    To find the corrent NFSv4 domain name, you have to look it up in the NFSv4 server's configuration files.
    Kind regards,
    Steffen

  • Control surface modules not loading correctly at startup

    Getting a series of errors on application startup -
    "Could not load Module "CS-32" (-43)
    and microKONTROL
    and TranzPort
    and US-2400
    These are all Control Surface - none of which I use and I'm stumnped once again. How do I make this go away?

    Check this thread:
    http://discussions.info.apple.com/webx?128@@.68b982bb

  • Modules not loading in Flex 4

    Hi All,
    I have migrated my application from Flex 3 to Flex 4. My application has 3 different modules. The modules are not loading when I run my application with Flex 4. Please help me in this respect.
    Thanks in advance,
    Nirmal Kumar Bhogadi

    Hi Nirmal,
    Right click on the project and go in Properties. On the left bar, go in the Flex Modules tab and check if your modules are present there.
    If not, browse your modules from the project and add them one by one.
    Regards
    Monika

  • [SOLVED] Modules not loaded after upgrade linux (3.9.5-1 - 3.11.6)

    Hi. After upgrading the package linux from 3.9.5-1 to 3.11.6,
    many modules such as wifi or psmouse are not loaded.
    My PC is Asus Zenbook UX31E.
    If I do by hand like
    # modprobe ath9k
    # modprobe psmouse
    wifi and psmouse are OK,
    but I want to set all necessary modules auto loaded.
    * Output of lsmod of linux 3.9.5-1 was 87 rows
    but lsmod of 3.11.6 (I attache below) is only 39 rows.
    * Both
    /etc/modprobe.d/
    /etc/modules-load.d/
    are empty on 3.9.5-1 and 3.11.6.
    Please give me advice, thx.
    Last edited by taro (2014-01-08 11:20:46)

    Thx. The version numbers seem to be identical.
    % uname -a                                                              [~]
    Linux tenryu 3.11.6-1-ARCH #1 SMP PREEMPT Fri Oct 18 23:22:36 CEST 2013 x86_64 GNU/Linux
    % pacman -Qi linux                                                      [~]
    Name           : linux
    Version        : 3.11.6-1
    Description    : The Linux kernel and modules
    Architecture   : x86_64
    URL            : http://www.kernel.org/
    Licenses       : GPL2
    Groups         : base
    Provides       : kernel26=3.11.6
    Depends On     : coreutils  linux-firmware  kmod  mkinitcpio>=0.7
    Optional Deps  : crda: to set the correct wireless channels of your country
    Required By    : None
    Optional For   : None
    Conflicts With : kernel26
    Replaces       : kernel26
    Installed Size : 64493.00 KiB
    Packager       : Thomas Bächler <[email protected]>
    Build Date     : Sat 19 Oct 2013 06:25:12 AM JST
    Install Date   : Fri 08 Nov 2013 12:06:17 PM JST
    Install Reason : Explicitly installed
    Install Script : Yes
    Validated By   : None
    best regards.

  • [Solved]Virtualbox kernel module not loaded

    I update my system today and when I try to run Virtualbox...
    WARNING: The vboxdrv kernel module is not loaded. Either there is no module
    available for the current kernel (3.6.11-1-ARCH) or it failed to
    load. Please reinstall the kernel module virtualbox-host-modules or
    if you don't use our stock kernel compile the modules with
    sudo dkms autoinstall
    You will not be able to start VMs until this problem is fixed.
    I already had this trouble before and this was the fix
    # modprobe vboxdrv
    But it doesn't work anymore
    Any ideas?
    Edit: This just get fixed by itself when restaring my PC. Sorry
    Last edited by ilq (2013-02-13 02:32:43)

    fsckd wrote:
    rc.conf is part of the deprecated init system. icebox is not using systemd and neglected to mention that.
    Amarildo, see the wiki.
    Thanks, it really helped. It's solved.

  • Usbser_edge module not loaded, lots of undefined symbols

    Greetings folks,
    I've just recently more or less completed my Solaris 10 (sparc) jumpstart image and have noticed that upon booting the system will warn about undefined symbols for the usbser_edge module. I've been hunting around and I can't seem to find out where this module is specified to be loaded. The machine in question is a 220R, and I'd like to figure out how to not load this module so the warnings will go away:
    Sep 9 09:33:25 jump-test krtld: [ID 819705 kern.notice] /kernel/misc/sparcv9/usbser: undefined symbol
    Sep 9 09:33:25 jump-test krtld: [ID 826211 kern.notice] 'usb_dprintf0'
    Sep 9 09:33:25 jump-test krtld: [ID 819705 kern.notice] /kernel/misc/sparcv9/usbser: undefined symbol
    Sep 9 09:33:25 jump-test krtld: [ID 826211 kern.notice] 'usb_dprintf1'
    Sep 9 09:33:25 jump-test krtld: [ID 819705 kern.notice] /kernel/misc/sparcv9/usbser: undefined symbol
    Sep 9 09:33:25 jump-test krtld: [ID 826211 kern.notice] 'usb_dprintf2'
    Sep 9 09:33:25 jump-test krtld: [ID 819705 kern.notice] /kernel/misc/sparcv9/usbser: undefined symbol
    Sep 9 09:33:25 jump-test krtld: [ID 826211 kern.notice] 'usb_free_log_hdl'
    Sep 9 09:33:25 jump-test krtld: [ID 819705 kern.notice] /kernel/misc/sparcv9/usbser: undefined symbol
    Sep 9 09:33:25 jump-test krtld: [ID 826211 kern.notice] 'usb_alloc_log_hdl'
    Sep 9 09:33:25 jump-test krtld: [ID 472681 kern.notice] WARNING: mod_load: cannot load module 'usbser'
    Sep 9 09:33:25 jump-test krtld: [ID 749970 kern.notice] WARNING: usbser:
    Sep 9 09:33:25 jump-test krtld: [ID 225575 kern.notice] unable to resolve dependency, module 'misc/usba' not found
    Sep 9 09:33:25 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:25 jump-test krtld: [ID 826211 kern.notice] 'usb_lookup_ep_data'
    Sep 9 09:33:25 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:25 jump-test krtld: [ID 826211 kern.notice] 'usb_parse_data'
    Sep 9 09:33:25 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:25 jump-test krtld: [ID 826211 kern.notice] 'usb_dprintf0'
    Sep 9 09:33:25 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:25 jump-test krtld: [ID 826211 kern.notice] 'usb_dprintf2'
    Sep 9 09:33:25 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:26 jump-test krtld: [ID 826211 kern.notice] 'usb_pipe_ctrl_xfer_wait'
    Sep 9 09:33:26 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:26 jump-test krtld: [ID 826211 kern.notice] 'usbser_close'
    Sep 9 09:33:26 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:26 jump-test krtld: [ID 826211 kern.notice] 'usbser_power'
    Sep 9 09:33:26 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:26 jump-test krtld: [ID 826211 kern.notice] 'usb_pipe_sync_ctrl_xfer'
    Sep 9 09:33:26 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:26 jump-test krtld: [ID 826211 kern.notice] 'usb_alloc_intr_req'
    Sep 9 09:33:26 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:26 jump-test krtld: [ID 826211 kern.notice] 'usbser_getinfo'
    Sep 9 09:33:26 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:26 jump-test krtld: [ID 826211 kern.notice] 'usb_pipe_close'
    Sep 9 09:33:26 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:26 jump-test krtld: [ID 826211 kern.notice] 'usb_unregister_event_cbs'
    Sep 9 09:33:26 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:26 jump-test krtld: [ID 826211 kern.notice] 'usb_pipe_reset'
    Sep 9 09:33:26 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:26 jump-test krtld: [ID 826211 kern.notice] 'usb_pipe_bulk_xfer'
    Sep 9 09:33:26 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:26 jump-test krtld: [ID 826211 kern.notice] 'usb_free_bulk_req'
    Sep 9 09:33:26 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:26 jump-test krtld: [ID 826211 kern.notice] 'usb_register_event_cbs'
    Sep 9 09:33:26 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:26 jump-test krtld: [ID 826211 kern.notice] 'usb_free_intr_req'
    Sep 9 09:33:26 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:26 jump-test krtld: [ID 826211 kern.notice] 'usb_free_log_hdl'
    Sep 9 09:33:27 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:27 jump-test krtld: [ID 826211 kern.notice] 'usb_pipe_stop_intr_polling'
    Sep 9 09:33:27 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:27 jump-test krtld: [ID 826211 kern.notice] 'usbser_attach'
    Sep 9 09:33:27 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:27 jump-test krtld: [ID 826211 kern.notice] 'usbser_detach'
    Sep 9 09:33:27 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:27 jump-test krtld: [ID 826211 kern.notice] 'usb_get_dev_data'
    Sep 9 09:33:27 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:27 jump-test krtld: [ID 826211 kern.notice] 'usb_pipe_open'
    Sep 9 09:33:27 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:27 jump-test krtld: [ID 826211 kern.notice] 'usb_alloc_log_hdl'
    Sep 9 09:33:27 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:27 jump-test krtld: [ID 826211 kern.notice] 'usbser_rsrv'
    Sep 9 09:33:27 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:27 jump-test krtld: [ID 826211 kern.notice] 'usbser_wsrv'
    Sep 9 09:33:27 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:27 jump-test krtld: [ID 826211 kern.notice] 'usbser_wput'
    Sep 9 09:33:27 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:27 jump-test krtld: [ID 826211 kern.notice] 'usbser_open'
    Sep 9 09:33:27 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:27 jump-test krtld: [ID 826211 kern.notice] 'usb_check_same_device'
    Sep 9 09:33:27 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:27 jump-test krtld: [ID 826211 kern.notice] 'usb_pipe_intr_xfer'
    Sep 9 09:33:27 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:27 jump-test krtld: [ID 826211 kern.notice] 'usb_create_pm_components'
    Sep 9 09:33:27 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:27 jump-test krtld: [ID 826211 kern.notice] 'usb_free_descr_tree'
    Sep 9 09:33:28 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:28 jump-test krtld: [ID 826211 kern.notice] 'usb_set_device_pwrlvl0'
    Sep 9 09:33:28 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:28 jump-test krtld: [ID 826211 kern.notice] 'usb_set_device_pwrlvl1'
    Sep 9 09:33:28 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:28 jump-test krtld: [ID 826211 kern.notice] 'usb_set_device_pwrlvl2'
    Sep 9 09:33:28 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:28 jump-test krtld: [ID 826211 kern.notice] 'usb_set_device_pwrlvl3'
    Sep 9 09:33:28 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:28 jump-test krtld: [ID 826211 kern.notice] 'usb_pipe_get_max_bulk_transfer_size'
    Sep 9 09:33:28 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:28 jump-test krtld: [ID 826211 kern.notice] 'usbser_soft_state_size'
    Sep 9 09:33:28 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:28 jump-test krtld: [ID 826211 kern.notice] 'usb_alloc_bulk_req'
    Sep 9 09:33:28 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:28 jump-test krtld: [ID 826211 kern.notice] 'usb_handle_remote_wakeup'
    Sep 9 09:33:28 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:28 jump-test krtld: [ID 826211 kern.notice] 'usb_client_attach'
    Sep 9 09:33:28 jump-test krtld: [ID 819705 kern.notice] /kernel/drv/sparcv9/usbser_edge: undefined symbol
    Sep 9 09:33:28 jump-test krtld: [ID 826211 kern.notice] 'usb_client_detach'
    Sep 9 09:33:28 jump-test krtld: [ID 472681 kern.notice] WARNING: mod_load: cannot load module 'usbser_edge'
    Sep 9 09:33:28 jump-test krtld: [ID 749970 kern.notice] WARNING: usbser_edge:
    Sep 9 09:33:28 jump-test krtld: [ID 225575 kern.notice] unable to resolve dependency, module 'misc/usba' not found
    Thanks in advance for any advice anyone can provide.
    pb

    I just attempted a generic search at Sunsolve, for "usbser_edge".
    It produced references to a lot of documents available after contract login to the site.
    If you have a Spectrum login account, get to BugID 4703982.
    It's from 2003 or so...
    but it discusses the SUNWuedg package being incorrectly installed,
    on beta versions of Sol-10, to an E250 and to a SB1000.
    Other search result references to various BugID's also happened to discuss
    removing references to the driver in the /etc/name_to_major file
    as well as in the /etc/driver_aliases file.
    See BugID 4790469 or BugID 5045102
    I don't trust my skill level with mucking around with such files, however.
    If you have contract coverage for the OS or for that system, open a support case.
    If not, then see if the SUNWuedg package is installed and remove it.
    Then a reconfiguration reboot may be in order.
    What the heck, try a reconfiguration reboot just for grins and giggles.
    ... just my two cents, at least.

  • Kbdmgr.exe not loading at startup

    Running 10.5.1 with boot camp and using Xp Pro on my mac book i am having an issue where the file kbdmgr.exe (boot camp manager) is not loading and running at startup. In my spy-bot under the start up section it is listed but when i actually do start up it won't load by itself, a check of running processes shows it is not loaded at all. If i go into C:/program files/boot camp and run it by clicking the exe from there it will.
    The main reason this is a concern is that when it is not loaded all my brightness and volume controls dont work.
    Can anybody help with this issue

    I'm running Bootcamp 2.0.1 on the Air under Vista; the kbdmgr program is not consistant; if the light level increases the keyboard goes out, if the light level falls it does not return unless you kill and re-launch kbdmgr.exe; at that point the lights on the keyboard restore.

  • Dock & App Switcher not loading at startup

    I recently purchased a new 2 x Quad core 2.93GHz Nehalem-based Mac Pro.
    About two of three times when I start the computer, the dock and application switcher will not load for 20 to 90 seconds after the rest of the computer has finished loading. I thought I had tracked it down to two applications that were consistently mentioned in the console log, but I uninstalled them and the problem has continued in the past several weeks since they were removed. I also just updated to 10.5.8, hoping that this would solve the issue, but it did not.
    At the end of this post I have pasted the error messages from the log that coincide with this issue. When the dock fails to load for a longer period of time, the log shows many more repetitions of this error.
    I have contacted Apple tech support directly about this and they have not been able to help.
    Has anyone else experienced this issue? Has anyone found a solution?
    Thanks!
    8/14/09 Aug 14, 9:01:56 PM com.apple.launchd[135] ([0x0-0x1e01e].com.apple.dock[192]) Exited abnormally: Bus error
    8/14/09 Aug 14, 9:01:57 PM com.apple.launchd[135] ([0x0-0x1f01f].com.apple.dock[193]) Exited abnormally: Bus error
    8/14/09 Aug 14, 9:01:59 PM com.apple.launchd[135] ([0x0-0x20020].com.apple.dock[194]) Exited abnormally: Bus error
    8/14/09 Aug 14, 9:02:00 PM com.apple.launchd[135] ([0x0-0x21021].com.apple.dock[195]) Exited abnormally: Bus error
    8/14/09 Aug 14, 9:02:00 PM com.apple.launchd[135] ([0x0-0x22022].com.apple.dock[196]) Exited abnormally: Bus error
    8/14/09 Aug 14, 9:02:00 PM com.apple.launchd[135] ([0x0-0x23023].com.apple.dock[197]) Exited abnormally: Bus error
    8/14/09 Aug 14, 9:02:01 PM com.apple.launchd[135] ([0x0-0x24024].com.apple.dock[198]) Exited abnormally: Bus error
    8/14/09 Aug 14, 9:02:02 PM com.apple.launchd[135] ([0x0-0x25025].com.apple.dock[199]) Exited abnormally: Bus error
    8/14/09 Aug 14, 9:02:03 PM com.apple.launchd[135] ([0x0-0x26026].com.apple.dock[201]) Exited abnormally: Bus error
    8/14/09 Aug 14, 9:02:05 PM com.apple.launchd[135] ([0x0-0x27027].com.apple.dock[202]) Exited abnormally: Bus error
    8/14/09 Aug 14, 9:02:06 PM com.apple.launchd[135] ([0x0-0x28028].com.apple.dock[203]) Exited abnormally: Bus error
    8/14/09 Aug 14, 9:02:07 PM com.apple.launchd[135] ([0x0-0x29029].com.apple.dock[204]) Exited abnormally: Bus error
    8/14/09 Aug 14, 9:02:08 PM com.apple.launchd[135] ([0x0-0x2a02a].com.apple.dock[205]) Exited abnormally: Bus error

    If nothing else succeeds, then it may prove quicker to just reinstall OS X which you can do as follows:
    How to Perform an Archive and Install
    An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
    1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
    2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
    3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
    4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
    5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
    6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

  • Wacom Intuos Pro aka Intuos 5 kernel module not loading

    Just got one of these and kernel module is not loading under kernel 3.11.2-1-ARCH.
    % lsusb | grep -i wacom
    Bus 004 Device 003: ID 056a:0315 Wacom Co., Ltd
    % grep -i wacom /proc/bus/input/devices
    % xsetwacom --list devices
    % pacman -Qqs wacom
    libwacom
    wacom-drivers
    wacom-udev
    wacom-utility
    xf86-input-wacom
    Any thoughts?

    hexadecagram wrote:Just got one of these and kernel module is not loading under kernel 3.11.2-1-ARCH.
    Are you sure it should work? If you check linuxwacom-announce mailing list, you will see that for your device (Intuos Pro):
    - X11 support is added by xf86-input-wacom 0.23.0
    - configuration support is added in libwacom 0.8
    - kernel support is added in input-wacom 0.19 but isn't in mainline kernel yet - on 28'th Spet Jason said: "We don't yet have support for the  new "Intuos" line, but we expect our next release in six weeks' time to include it."
    I'd say you have to wait for newer kernel, or try installing input-wacom on your own risk (different thing from xf86-input-wacom). Patch for mainline kernel reached Dmitry Torokhov's input tree - but isn't merged with official kernel yet, even 3.12rc5 still does not have those patches.

  • Flex 3 Module not loading - 1 of 32???

    I have 1 Module out of 32 that will not load?  Months ago, some PCs who did not have the Flex Framework already downloaded would fail, so I put the framework in the root folder and they worked.  Today, I did a simple update to the code and it is back to not running again.  The module in question was developed exactly as the other 31.  In my development environment, where much code has changed, including the main app - it loads just fine.  It is like the main application does not even try to load the module, as the 1st real action is to turn on the wait cursor which I never see.  Any and all advice and/or guidance is appreciated.
    Thanks

    Use a network monitor and see if the module is requested.

  • Parallel port printer modules not loading autmatically

    According to the wiki entry for CUPS, either the kernel or or a small configuration file in /etc/modules-load (not /etc/modules-load.d) is supposed to automatically load these modules on boot. When I run lsmod I'm finding none of the printer modules (lp, parport, parport_pc) are getting loaded even though the printer is attached and powered up. Any idea why these modules are not loading? They load perfectly well manually with the modprobe command.
    As the wiki specifies, I do have a configuration file in place at /etc/modules-load/printing.conf with the following contents:
    lp
    parport
    parport_pc

    Commenting out the INSTALL lines in modprobe.conf worked perfectly.
    Before that i tried the stock kernel form current and am now using the one from testing. Neither worked with sound while the INSTALL lines were ther.
    What changed?

  • IPMI kernel modules not loading - no ipmi device

    My HP ML110 G5 has a IPMI device that worked but somewhen (I can't say when) it stopped working.
    Proof that they exist in th machine with dmidecode:
    Handle 0x0025, DMI type 38, 18 bytes
    IPMI Device Information
        Interface Type: KCS (Keyboard Control Style)
        Specification Version: 2.0
        I2C Slave Address: 0x10
        NV Storage Device: Not Present
        Base Address: 0x0000000000000CA2 (I/O)
        Register Spacing: Successive Byte Boundaries
    I quite soon found out that the ipmi kernel modules are not loaded so I tried to load them with modprobe:
    modprobe ipmi_msghandler
    modprobe ipmi_devintf
    modprobe ipmi_si
    no error, no response, no modules loaded (check with lsmod).
    There are descriptions (http://en.onoclea.com/bits/hp-microserver-remote-access-card-ipmi-on-linux.html, http://wiki.adamsweet.org/doku.php?id=ipmi_on_linux) how to load the ipmi_si module with manual parameters. Tried, no error, no response, no modules loaded (check with lsmod).

    Zancarius wrote:
    Sounds to me like the firmware for whatever reason isn't being installed in the appropriate location.
    I checked out the PKGBUILD for b43-firmware (which I'm assuming is what you installed), and it appears to be using b43-fwcutter presumably to snag the appropriate files and place them in /usr/lib/firmware:
    # Application
    b43-fwcutter -w ""${pkgdir}"/usr/lib/firmware/" linux/wl_apsta.o
    Does the PKGBUILD generate any errors? Did you check /usr/lib/firmware for the firmware for your wireless? Worst case, you could probably try running b43-fwcutter manually and see what it does. Maybe it has some verbose/debug option you could use, too.
    The firmware is installed to the correct directory and the PKGBUILD doesn't generate any errors. I've tried b43-fwcutter manually as well to no avail. Even if that were the case though it doesn't explain why the new kernel also rejects the usbnet, ath9k, and b44 modules. Basically I'm stuck on this old(ish) kernel until this is fixed if I want any sort of network connectivity.
    Xyne wrote:This is a long shot, but if you have a separate boot partition, check that it is actually mounted. If not, backup/remove the contents /boot, mount the partition and rebuild the kernel image
    I do not have a separate boot partition on this machine. And the mtime of the initramfs images is certainly current.
    Last edited by airencracken (2012-07-22 17:41:56)

Maybe you are looking for

  • Need to change email on Apple ID and don't want to lose all my purchases!

    I am trying to get iCloud set up but have an issue with my apple ID.  Somehow I managed to get two separate IDs.  My original ID, which has all my itunes etc on it is associated with my old email which used to forward to my current email, but no long

  • IPhone 3GS Not Recognized by PC, iTunes or Device Manager

    I'm hoping someone can help me out here, my laptop isn't recognizing my iPhone when I plug it in, it doesn't show in iTunes and it doesn't show in Device Manager either.  I've already restored my computer back almost a week, I've reinstalled iTunes,

  • News report on phone line

    I have a Verizon landline and on one of my phones (a corded phone) I always hear news reports in the background.  How do I stop this? Thank you.

  • Application server not starting - I have given the dispatcher log below

    trc file: "dev_disp", trc level: 1, release: "700" sysno 00 sid P1D systemid 560 (PC with Windows NT) relno 7000 patchlevel 0 patchno 75 intno 20050900 make: multithreaded, Unicode, optimized pid 2800 Wed Apr 07 16:09:05 2010 kernel runs with dp vers

  • Alpha not rendering

    My alpha is not rendering out with the new CC2014 update. anyone else has this problem?