MoH issue without transcoder
Friends,
I am facing issue with MoH using G.729 codec. Following is the simple installation scenario;
Two sites are there viz HQ and B1.
MoH server (CUCM), Transcoder (2811), couple of phones are in HQ Region and few phones are in B1 Region.
Region between HQ and B1 is restricted to using 8Kbps (G.729).
If I make normal call between HQ and B1 phones, G.729 codec is invoked as per region settings. This means that both of these phones support G.729 codec.
Now if HQ user puts B1 user on Hold, MoH Server doesn't play MoH to B1 user in G.729 (play only beeps using SCCP signaling) untill and unless I don't use MRG in HQ device pool.
If B1 user puts HQ user on hold, the MoH plays perfectly as region settings within HQ is set to use 64Kbps (G.711).
My question is since MoH server is capable of playing MoH in G.711, G.729 and Wideband, then why it's not playing MoH in G.729 directly.
Would appreciate your suggestion.
Regards,
Vipul
Files uploaded to the Publisher will not replicate to the sub, this is working as designed. Only static data and user facing data replicate. This is the same as uploading firmware to just a Pub and expecting the Sub to get that firmware or device pack as well, it will not and must be uploaded at each node.
Supported Music On Hold Features
Music on hold supports the following features, which are listed by category. Feature categories include music on hold server characteristics, server scalability, server manageability, server redundancy, database scalability, and manageability.
Music On Hold Server Characteristics
Servers stream music on hold from music on hold data source files that are stored on their disks.
Servers may stream music on hold from an external audio source (for example, looping tape recorder, radio, or CD).
Music on hold servers can use a single music on hold data source for all source streams and, hence, all connected streams. When multiple music on hold servers are involved, the local server of each music on hold server always stores the music on hold data source files. Cisco Unified Communications Manager does not support distribution of fixed-device (hardware) audio sources across music on hold servers within a media resource group.
Music on hold data source files have a common filename across all music on hold servers.
You must ensure that music on hold data source files are uploaded to each MoH server.
Each audio source receives a feed from either a designated file or a designated fixed source (for example, radio or CD).
A designated fixed source comprises a single device, which is either enabled or disabled.
The audio driver on the local machine makes a single fixed source available to the music on hold server.
Music on hold servers support the G.711 (a-law and mu-law), G.729a, and wideband codecs.
Music on hold servers register with one primary Cisco Unified Communications Manager node.
Similar Messages
-
Editing a movie that was already cut together without transcoding .h264 footage to proresslt. I want to transcode full clips that are used in the edit, but not any of the leftovers. Is there an efficient way to this?
I'm thinking I can convert the files with Compressor and place them in a new folder with their original file names (not sure how to get compressor to do this yet) and then do a major "Reconnect Clip" afterwards.
Not sure if there's a more efficient way to get all the clips in the timeline to compressor. I want the full files, not a sequence export. I can go through one clip and a time and add the master file. I'd rather not.
The more automated processes the better.
Thank you. I'm currently working so I don't have the time to scour the forums. Help or links to help would be greatly appreciated.
Byeah Media reconnect can be an issue.
Will Media Manager convert files? Another thing I was thinking was to Media Manage the sequence out, copying all the used files to a new folder, and then running that through compressor. But it still leads to a massive reconnect. Fine tuning all those edits would be less involved than re-editing the whole thing, I hope. -
Export without "transcoding"? (h264 Eos .mov files)
Hy!
My question is: Is it possible to export from the original footage without transcoding bits that dont need to?
I am using a Canon Eos 550d which produces h264 .mov files with 49mbit/sec. As I believe mercury-playback-engine acts as a frameserver to the editing program of CS5 and serves only I-frames to Premiere. Mercury decodes the files and plays them back, and btw it doesnt report the proper clip properties - My Canon Eos 550d .mov footage (sequence setting: preset: digital slr - dslr 1080p25) shows up as "Type: MPEG Movie" when I choose right-click-Properties. But I assume that internally the footage is not transcoded to mpeg but just decoded by mercury and played back, so Premiere only gets I-frames to handle.
So the question at this point is: What is the source of footage that the export module uses? Does the export module rely on mercury and is feeded only i-frames (aka decoded footage), so that transcoding has to be done, as not to transcode at this point would mean to save uncompressed 25p-full-size-frames one after the other? Or is the export module taking the source file and re-encoding (I understand that there is no "transcoding" with h264, or at the time beeing not yet..) it (because then, as I understand, it would be possible to save parts of sequences withour re-rendering them)?
So, if it is possible, how to tell the export module not to re-encode the bits that dont need re-rendering (all parts that are not near any cuts or effects)- which settings are to be taken, or is there an automatism?
Thanks!You are looking for "Smart Rendering." PrPro does not offer that. Not sure which NLE program you will need, but I think that at least one version of Sony's Vegas offers that. Google/Bing "smart rendering," and you should get a list of NLE's, that support it.
Now, there can be major issues, as one is going from a GOP format, to a GOP format. Might, or might not, come out right.
Good luck,
Hunt -
I have deleted all my videos songs and photos from my iphone 4 but when i connect to itunes it still shows 17gb free. how can I solve this issue without restore. Total storage of my iphone is 32 gb.
I don't see an issue, but if you mean why didn't you get most of your memory back you need to see what else is using storage. Go to Settings/General/Usage. Wait a bit for it to calculate storage allocation, then when it finishes you can see how much storage each app uses.
-
Goods issue without sales order
Hello experts,
1) Goods issue without sales order (movt type 251) in T.code "MB1A"*
Accounting entry:- Change in stock of Fin. Goods A/c Dr.
To Stock of Fin. Goods A/c
2) Customer Invoice through T.code "FB70"
Accounting entry:- Customer A/c Dr.
To Sales of Fin. Goods A/c.
We are temporarily not implementing SD module, i am entering Sales transaction data. Are the above two accounting entries correct in respect to "Goods Issue" and "Customer Invoice" ?
Regards
AshwinThanks a lot, but if you could please tell me what impact will on the balance sheet? will the stock be reduced after goods issue
For eg;
Change in stock of F.G A/c Dr. 200
To Stock of F.G A/c 200
Customer A/c Dr. 200
To Sales of F.G 200.
Is this correct? and i have assigned cost center to "Change in stock of Fin. Goods.
Ashwin -
Post Goods Issue without reference to order
Dear All
We are using both Account and Costing Based COPA. We do post goods issue without reference to order. Now our problem is that at the time of post goods issue there is no Profit Analysis document posted in the system and Profit Segment field is not modifiable. We have marked the field profit segment optional in movement type 601.
Please let me know what can be the problem.
Regards
Farhan QaiserCheck the field status variant on GL (OBC4)
-
Which option I need to choose when I export AVCHD to a movie , without transcoding?
It says that Adobe Premiere CS5 can import and natively edit AVCHD content . without transcoding. How can I do this ? It seems when I export AVCHD MTS from my camera to Premiere , and want to join multiple MTS clips into ine timeline , which options may I choose to export , without transcoding?
I have try Blu-ray it transcodes to m4v , or using adobe dinamic link to encore , it ask me to transcode.Premiere does import and edit native AVCHD.
Alll exports are encoded / transcoded.
AVCHD is a camera ( source) codec only. Not a delivery format from an edit. -
When trying to log in with my primary Apple ID and password, I am continuously asked for my pass word without being able to log in. How can I solve this issue, without creating a new Apple ID?
Chewning wrote:
I saved some of my music to a Cloud I can't access. Now, they show up as "Purchased" in iTunes, and I'm not given the option of re-downloading OR repurchasing them.
Music purchased from the iTunes store is not stored in your personal iCloud account, and an iCloud account is not required to redownload them. You should be able to redownload them as explained here: http://support.apple.com/kb/ht2519. If you are unable to, contact iTunes store support for assistance by going to https://expresslane.apple.com ; click ‘iTunes', and then 'iTunes Store', then 'Purchases, Billing & Redemption'. -
Can you RENAME footage to be imported (using metadata)...without transcoding?
Is there a way, or a program in the suite that can rename all the files using the file's metadata (namely the date and time it was shot) that we plan to import without transcoding them? They are AVCHD files (.MTS files)... For years we've transcoded to prores proxy and then eventually to ProRes422 when final edit is locked for export, but since Premiere handles native avchd files (.mts) pretty well now, I'd rather not have to transcode and save some hard drive space. Transcoding doesn't appear to offer any benefits over editing natively anymore, right (for basic editing with basic color correction)?
So is there a program (prelude? bridge?) that I can use to access all the mts files and rename them by the date and time it was shot so that I can take all 5 or 6 SDHC cards and combine them and have them all listed in chronological order? Right now I end up with either a folder for each card, or if I try to combine all the clips, I end up with a bunch of files with the same name (eg. 00000.MTS, 00001.MTS, etc...) since that's how they were named coming out of the camera on their respective card.
Please advise. Thanks!jamesp2 wrote:
If you've got a moment, try this, assuming you're on Windows: shoot a few clips, copy the entire file structure to disk, navigate to the "stream" folder, open it, highlight all the files, right click on the first one, select "rename", rename it (say, with the date& time shot), and execute. All the highlighted files will be renamed to that time and date, but incrementally numbered ,(1), (2), (3), etc. in sequence. So each file now has the same root name (date and time), but is numbered sequentially after that. No duplicate names.
Now, using the Media Browser, import those clips. Then go back to the stream folder and see if PPro created .xmp files for each imported clip. If so, it would appear you have metadata. If not, no metadata, because PPro couldn't find any after renaming.
I'm on a mac. But I still tried a few things after reading your post...
First, I copied two existing SDHC card's folders to a new location so I could mess with them. I went in and renamed all the clips 2 different ways:
1) For one folder I just renamed them straight from the "stream" folder (although on a mac I don't think you can rename them all at once using Finder (which is mac's "search app"). So I did one at a time and then went back to Media Browser and they did not appear anymore. I click on the PRIVATE folder and nothing appears (before renaming, all the files would show except the "duplicate spanned clips" as discussed above). So that didn't work.
2) Using Finder, I navigated to the stream folder on my 2nd copy of the original SDHC card and then I right-clicked and selected "open with" and selected Adobe Bridge. Bridge opened up that whole folder with all the clips (including the duplicate spanned clips). I renamed them there using date/time, etc. I went back to Media Browser and they also did not show up now. So...instead of using Media Browser, I just imported the whole folder into the project panel. The clips now did populate into the project panel with the new names.
The new clips generated .cfa and .pek files but did NOT generate .xmp files. Only if I did NOT rename the files did it generate .xmp files.
Not sure what all this means. I could just transcode to rename, or use clipwrap/prelude workaround like in post #11, or do my 2nd method above using Bridge and just deal with no XMP files (not sure how that will affect anything?)...or hope for another alternative. -
The left side of my mini ipad is unresponsive. Is there a fix for this hardware issue without costing me an arm and a leg?
If it's in warranty and a defect then it's covered under your warranty. If it was the result of user negligence, then it will not be covered. In that case see below:
If your iPod Touch, iPhone, or iPad is Broken
Apple does not fix iDevices. Instead, they exchange yours for a refurbished or new replacement depending upon the age of your device and refurbished inventories. On rare occasions when there are no longer refurbished units for your older model, they may replace it with the next newer model.
ATTN: Beginning July 2013 Apple Stores are now equipped to do screen repairs/replacements in-house on iPhone 5 and 5C. In some cases while you wait. According to Apple this is the beginning of equipping Apple Stores with the resources needed to do most repairs for iPhones, iPads, and iPod Touches that would not require major replacements. Later in the year the services may be extended as Apple Stores become equipped and staffed with the proper repair expertise. So, if you need a screen repaired or a broken screen replaced or have your stuck Home button fixed, call your local Apple Store to see if they are now doing these in-house.
You may take your device to an Apple retailer for help or you may call Customer Service and arrange to send your device to Apple:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes international calling numbers.
You will find respective repair costs in the appropriate link:
iPod Service Support and Costs
iPhone Service Support and Costs
iPad Service Support and Costs
There are third-party firms that do repairs on iDevices, and there are places where you can order parts to DIY if you feel up to the task:
1. iResq or Google for others.
2. Buy and replace screen yourself: iFixit -
I followed the instructions given to turn my automatic download icon in my iphone 3 and still goes back to off position. Any idea how to fix this issue without getting a new one?
Something may have gone amiss on your iPhone.
To attempt to correct this follow these steps:
Backup your iPhone using iTunes or iCloud.
Use iTunes to completely restore your iPhone as Factory new.
Monitor battery usage to see if it is normal. If not, you may have a hardware problem - if so, contact Apple support.
Restore your iPhone from your backup above.
Check battery usage to confirm that it is still normal. -
Convert AVCHD to H264 without transcoding?
Is it possible with PRE 9 (or 10?) to bring in AVCHD clips (MTS's) and output a H264 file without transcoding (decompressing and recompressing). I am trying to get the highest quality and highest resolution file that is Quicktime compatible and/or playable on Apple TV. Thanks
PrE does not do smart rendering, in that it WILL Transcode on Export/Share.
I would look into Apple's QuickTime Pro (US $ 29 upgrade/unlock), as I believe that it will do just what you want.
Good luck,
Hunt -
XSLT Issue : Without the target file mapping is happening
Hi,
In one of my composite, which is a provider abcs transforms source to target, where in the transformation file, source and target are mentioned as usual, both are pointing to MDS locations.
Source file is physically present in the MDS, but the target file is not present but still the transformation happening.
The flow is like below.
ProviderABCS -> Adapter service which will write the file.
Some time the file is created with data and some time only the file is created without data.
My question is how come there is no exception caught ? If i keep the target schema or wsdl file in MDS will this issue get resolved ?
Thanks,
VijayWhen i try to open the xslt file with designer view its complaining that the target file is missing, but when i deploy, iam able to deploy and run with some instances.
Still investigating.. wll update you.. soon. In the mean time if any body have any other idea.. plz update the thread.
Thanks,
Vijay -
Get rid of the libreadline issue without crashing everything
Hi Guys,
Last week I've made a simple package installation using pacman, and experimented the dark and unpleasant libreadline.so.5 issue...
Searched in forum, and found this post. Thanks to arkham, I was able to solve this issue using Live CD.
However, I got plenty of boxes running Arch, some of them being VPS, which I can't physically access... So using Live CD to restore them all is not acceptable solution.
In his post, arkham says to always upgrade system using -Syu switches. However, the -u switch ask me for several updates I *don't* want to perform, such as netkit-telnet, portmap, iproute, etc... Which results in unresolvable package conflict:
:: Starting full system upgrade...
:: Replace netkit-telnet with core/inetutils? [Y/n] n
:: Replace iproute with core/iproute2? [Y/n] n
:: Replace atl2 with core/kernel26? [Y/n] n
:: Replace wlan-ng26 with core/kernel26? [Y/n] n
:: Replace rt2500 with core/kernel26? [Y/n] n
:: Replace man with core/man-db? [Y/n] n
:: Replace portmap with core/rpcbind? [Y/n] n
warning: sudo: forcing upgrade to version 1.7.2p1-1
warning: vi: forcing upgrade to version 050325-1
:: pacman has detected a newer version of itself.
:: Do you want to cancel the current operation
:: and install the new pacman version now? [Y/n] n
resolving dependencies...
looking for inter-conflicts...
:: iproute2 conflicts with iproute. Remove iproute? [Y/n] n
error: unresolvable package conflicts detected
error: failed to prepare transaction (conflicting dependencies)
:: iproute2: conflicts with iproute
All of these boxes are live servers running several websites, and I can't afford to crash them for a long period of time (ie: even 30 mins is unacceptable for my clients), so my question is: How can I fix my distros to get pacman up and running again, without upgrading iproute, portmap...
I'm aware my question may lack of details, so tell me if you don't get my point.
Thanks in advance!From man /etc/pacman.conf:
IgnorePkg = package ...
Instructs pacman to ignore any upgrades for this package when
performing a --sysupgrade.
Although, there may be problems with the dependencies; to be completely honest, I'm not sure that archlinux is usable in a production server (if you want to keep it up-to-date).
Last edited by arkham (2009-11-20 18:59:25) -
Message Splitting issue (without bpm)
Hi Experts,
I was currently trying to create a message split (1 message --> 2 output) using BPM like in this blog: Illustration of Multi-Mapping and Message Split using BPM in SAP Exchange Infrastructure
Then i noticed that it was also possible to achieve this without using BPM (creating a interface mapping with 2 outputs, and using the interface determination with the extended option) like on this one:
Illustration of Multi-Mapping and Message Split using BPM in SAP Exchange Infrastructure
(but using the structure showed in the first blog since i was just testing)
The issue i have is that even when it worked, and i see all good in the XML monitoring (SMXB_MONI) the both resulting files appear only with one field, and i can't see the others
Example from the XML monitoring:
ORIGINAL FILE: (I split based on the id 1 and 2)
<?xml version="1.0" encoding="utf-8" ?>
- <ns:bpm_in_MT xmlns:ns="http://bpm.com/splitting">
- <record>
- <details>
<name>Jorge</name>
<id>1</id>
</details>
- <details>
<name>Fernando</name>
<id>2</id>
</details>
</record>
</ns:bpm_in_MT>
RESULT FILE 1:
<?xml version="1.0" encoding="utf-8" ?>
- <ns1:bpm_out_MT xmlns:ns1="http://bpm.com/splitting">
- <record>
- <info>
<name>Jorge</name>
<id>1</id>
</info>
</record>
</ns1:bpm_out_MT>
RESULT FILE 2:
<?xml version="1.0" encoding="utf-8" ?>
- <ns1:bpm_out1_MT xmlns:ns1="http://bpm.com/splitting">
- <record>
- <info>
<name>Fernando</name>
<id>2</id>
<age>20</age>
</info>
</record>
</ns1:bpm_out1_MT>
HERE's the ISSUE:
Files in the FTP folder:
file1.txt with only "Jorge "
file2.txt with only "Fernando "
when the first file should have 2 fields (id is included), and the second one should be name (id and age included)
Could this be a parsing issue? i'm confused since i see no errors in the channels
I'm using 2 FTP receivers channels with Content conversion
CC_FTP_first_file_receiver:
Recordset: info
info.fieldNames name,id
info.fieldFixedLengths 15,1
info.keyFieldValue 1
info.endSeparator 'nl'
info.processFieldNames fromConfiguration
CC_FTP_second_file_receiver:
Recordset: info
info.fieldNames name,id,age
info.fieldFixedLengths 15,1,2
info.keyFieldValue 2
info.endSeparator 'nl'
info.processFieldNames fromConfiguration
I may have no use for the keyfieldvalue since i'm only saving that file in FTP, but i already removed that and it didn't change much, i still get 2 files, but only with the "name" tag on them
Any ideas??
i'm sure i'm missing something basic, but i'm don't have much experience on XML
Thanks!Hi,
This is really intersting as well as unexpected result...if you used directly the XML format then 2 fiels are created with appropriate data with all fields....
And if you used the FCC then , fields are missing...so one thing is clear that as you have already said..issue is with FCC only...
Have you tried to process only single file with FCC instead of 2 files at a time.
Also if possible try out with fieldSeperator parameter instead of FixedFieldLenghts...see whats the result...
I hope this will give you the hint...
Thanks
swarup
Maybe you are looking for
-
Thumbnails will not open in iphoto
Thumbnails will no open in iphoto
-
Text in abode form as language dependent
Hi all, I have a text field Statement for detailed analyisis report of the Account. It's static text value. The title in the text field needs in 2 lines for language "DE". Currently it is in EN. How can I make the text field as language dependent. R
-
Problem Solved.
-
Hi, I need create a new condition type for discount where one of the fields of access table is the field UNAME (user logged). For example: If user logged is Sara, she can give 15% of discount, but if user logged is John, he can give 50% of discount.
-
Loss of sync speed (over 50%), openreach say line ...
Hi, I hope someone can help! For the last 24 months my sync speed has been a consistent and stable 7000+ so my BRAS profile was 6500. Last weekend the connection dropped and now will not sync any faster than ~3000, so half the usual speed, well actua