Monitor job failure

Hi
after a local chain completes then monitor job is executed. We fix some time for this. If process chain takes long time than that it fails
i just want to see the time fixed for that
Thanks & Regards,
Virinchi.

Check what is the maximum time its taking to complete the process. and set it as the maximum wait time.
Sometimes as the system is busy it can not allocate the processes to complete the process.If this is the case you can avoid it by checking whether any other processchains are triggering at this time. If there are any, try to change the process chain start timings( With Client Permission).
Assign points if it helps.....

Similar Messages

How to find out batch job failure and taking action:

Normally We will monitor the batch jobs through transaction code sm37 for job monitoring. In SM37 we will give a batch job name date and time as input. In the first step we will check the batch job for the reason failure or check the spool request for the batch job for failures an help in analyzing the error
I understand from the my experience is that the batch may fail due to below reasons.
1.,Data issues : ex: Invalid character in quantity (Meins) field >>>> We will correct the corresponding document with correct value or we will manually run or request the team to rerun the batch job by excluding the problematic documents from the batch job variant so that it may process other documents.
2.Configuration issues : Materials XXXX is not extended for Plant >>>> we will contact the material master team or business to correct the data or we will raise sub contract call with support team to correct he data. Once the data been corrected and will request the team to rerun the batch job.
3.Performance issues : Volume of the data being processed by the batch job ,network problems.>>>Normally these kind of issues we will encounter during the month end process as there will lot of accounting transactions or documents being posted business hence it may cause the batch job failure as there is enough memory to complete the program or select queries in the program will timeout because of volume of the records.
4.Network issues. : Temporary connectivity issues in other partner systems :Outage in other partner systems like APO or other system like GTS will cause the batch job failure as Batch job not in position to connect other system to get the inforamtion and proceed for further steps.Nornmally we will check RFC destination status by running a custom program weather connectivity between system are in progress or not. then intimate other partner system for the further actions, Once the partner system comes online then we will intimate the team to restart or manually submit batch job.
Some times we will create a manual job by transaction code SM36.

I'm not sure what the question is among all that but if you want to check on jobs that are viewable via SM37 and started via SM36. The tables are TBTCP -Background Job Step Overview and TBTCO - Job Status Overview Table.
You can use the following FM to get job details:
GET_JOB_RUNTIME_INFO - Reading Background Job Runtime Data

Auto alert mechanism for ATG scheduled job failure and BCC project failure

Hello all,
Could you please confirm if there are auto alert mechanisms for ATG scheduled job failure and BCC project failure?
Waiting for reply.
Thanks and regards,

Hi,
You need to write custom code to get alerts if an ATG Scheduler fails.
For BCC project deployment monitoring, please refer to the below link in the documentation.
Oracle ATG Web Commerce - Configure Deployment Event Listeners
Thanks,
Gopinath Ramasamy

IMPORT MONITOR JOBS ERROR IN ECC 6 INSTALLATION

WARNING 2014-12-18 23:54:18
Execution of the command "C:\Program Files\j2sdk1.4.2_13\bin\java.exe -classpath migmon.jar -showversion com.sap.inst.migmon.imp.ImportMonitor -dbType ORA -importDirs "E:\ECC EXPORT 1\EXPORT_51031897-1\EXP1;E:\EXPORT 2\51031897-2\EXP2;E:\EXPORT 3\51031897-3\EXP3;E:\EXPORT 4\51031897-4\EXP4;F:\EXPORT 5\51031897-5\EXP5;F:\EXPORT 5\51031897-5\EXP6;F:\EXPORT 5\51031897-5\EXP7;F:\EXPORT 5\51031897-5\EXP8;F:\EXPORT 5\51031897-5\EXP9;F:\EXPORT 5\51031897-5\EXP10;F:\EXPORT 5\51031897-5\EXP11" -installDir "C:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS" -orderBy "" -r3loadExe F:\usr\sap\AMC\SYS\exe\uc\NTI386\R3load.exe -tskFiles yes -extFiles yes -dbCodepage 4103 -jobNum 3 -monitorTimeout 30 -loadArgs " -stop_on_error" -trace all -sapinst" finished with return code 103. Output: java version "1.4.2_13"Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_13-b06)Java HotSpot(TM) Client VM (build 1.4.2_13-b06, mixed mode)Import Monitor jobs: running 1, waiting 3, completed 68, failed 0, total 72.Import Monitor jobs: running 2, waiting 2, completed 68, failed 0, total 72.Import Monitor jobs: running 3, waiting 1, completed 68, failed 0, total 72.Loading of 'SAPAPPL1_14' import package: ERRORLoading of 'SAPAPPL2_2' import package: ERRORImport Monitor jobs: running 1, waiting 1, completed 68, failed 2, total 72.Import Monitor jobs: running 1, waiting 1, completed 68, failed 2, total 72.Loading of 'D010TAB' import package: ERRORImport Monitor jobs: running 0, waiting 1, completed 68, failed 3, total 72.
this is the error i'm getting
i started oracle instance through command prompt but in vain. only four jobs r not completing.
i checked virtual memory.
please help me out.
thanks
krish

Hi Krish,
Welcome to SDN.
The installation log files would help figure out the exact error.
In the below case, the log file SAPAPPL2_2.LOG might give more information. Let us if the logs have any errors mentioned.
Logs should be in the <OS drive>\Program Files\sapinst_instdir\.... folfer.
Regards,
Srikishan

HP ePrint Home&Biz app not working. Print job failure:busy message appears on tablet

I have an HP Laserjet P1102W and am trying to print from a Viewsonic tablet (android OS) using the HP ePrint Home&Biz app. I can send an email to the printer via the tablet and it prints the document with no problems.
I apologize in advance for the long message...
If I try and hit the PRINT key on the lower bar (which says 'HP Laserjet Professional P1102W (NPI7...host name), all that happens is blue & green LED's come on, green, blue flashes, green, blue flashes, green, blue flashes, then green and blue stay on steady. Just before the blue and green come on steady at the end, the "print job failure:busy" message flashes on my tablet.
I assume the sequence of LED flashes is the HP printer receiving a print command 3 times and can not perform the task because the printer thinks it is busy.
After searching for this problem on the net, it would appear I am not the only person with this issue. And yes, I have tried powering down my modem, printer, PC, and tablet and restarting all the above. Not that the PC has anything to do with it, but I am desperate.
Does anyone have a viable working solution to this problem???

Hello,
Thanks for the post. With this one, there is a firmware update available for the printer, and I've included a link below that with some excellent steps to check regarding this issue. Good Luck!
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=219&lc=en&cc=us&dlc=en&sw_lang=&product=41103...
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02933944&cc=us&dlc=en&lc=en&product=4110396&tmp...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

ERRORImport Monitor jobs: running 0, waiting 1, completed 17, failed 1,

Hello,
I am installing ECC 6.0 on database Maxdb7.6. window 2003 service pack 2 processor AMD 3400 RAM 2 GB,
I am getting the following error at the ERRORImport Monitor jobs: running 0, waiting 1, completed 17, failed 1, total 19.
WARNING 2010-10-29 22:40:15
Execution of the command "C:\j2sdk1.4.2_09\bin\java.exe -classpath migmon.jar -showversion com.sap.inst.migmon.imp.ImportMonitor -dbType ADA -importDirs D:\Ides\exportdb\db1\EXP1;D:\Ides\exportdb\db2\EXP2;D:\Ides\exportdb\db3\EXP3;D:\Ides\exportdb\db4\EXP4;D:\Ides\exportdb\db5\EXP5;D:\Ides\exportdb\db6\EXP6;D:\Ides\exportdb\db6\EXP7;D:\Ides\exportdb\db6\EXP8;D:\Ides\exportdb\db6\EXP9;D:\Ides\exportdb\db6\EXP10;D:\Ides\exportdb\db6\EXP11 -installDir "C:\Program Files\sapinst_instdir\ERP\SYSTEM\ADA\CENTRAL\AS" -orderBy "" -r3loadExe E:\usr\sap\IOL\SYS\exe\uc\NTI386\R3load.exe -tskFiles yes -extFiles no -dbCodepage 4103 -jobNum 3 -monitorTimeout 30 -loadArgs " -nolog -c 0" -trace all -sapinst" finished with return code 103. Output: java version "1.4.2_09"Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_09-b05)Java HotSpot(TM) Client VM (build 1.4.2_09-b05, mixed mode)Import Monitor jobs: running 1, waiting 1, completed 17, failed 0, total 19.Loading of 'SAPSSEXC' import package: ERRORImport Monitor jobs: running 0, waiting 1, completed 17, failed 1, total 19.
ERROR 2010-10-29 22:40:15
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2010-10-29 22:40:15
FCO-00011 The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
import_monitor.java.log
java version "1.4.2_09"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_09-b05)
Java HotSpot(TM) Client VM (build 1.4.2_09-b05, mixed mode)
Import Monitor jobs: running 1, waiting 1, completed 17, failed 0, total 19.
Loading of 'SAPSSEXC' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 17, failed 1, total 19.
PLZ help me
Thanks&regards
Vijay kumar
Moved from ABAP, General
Edited by: kishan P on Nov 2, 2010 10:17 AM

ERROR: 2010-10-29 22:07:26 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSEXC' import package is interrupted with R3load error.
Process 'E:\usr\sap\IOL\SYS\exe\uc\NTI386\R3load.exe -i SAPSSEXC.cmd -dbcodepage 4103 -l SAPSSEXC.log -nolog -c 0' exited with return code 2.
For mode details see 'SAPSSEXC.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
WARNING: 2010-10-29 22:07:56
Cannot start import of packages with views because not all import packages with tables are loaded successfully.
WARNING: 2010-10-29 22:07:56
1 error(s) during processing of packages.
INFO: 2010-10-29 22:07:56
Import Monitor is stopped.
INFO: 2010-10-29 22:39:45
Import Monitor is started.
CONFIG: 2010-10-29 22:39:45
Application options:
dbCodepage=4103
dbType=ADA
extFiles=no
importDirs=D:\Ides\exportdb\db1\EXP1;D:\Ides\exportdb\db2\EXP2;D:\Ides\exportdb\db3\EXP3;D:\Ides\exportdb\db4\EXP4;D:\Ides\exportdb\db5\EXP5;D:\Ides\exportdb\db6\EXP6;D:\Ides\exportdb\db6\EXP7;D:\Ides\exportdb\db6\EXP8;D:\Ides\exportdb\db6\EXP9;D:\Ides\exportdb\db6\EXP10;D:\Ides\exportdb\db6\EXP11
installDir=C:\Program Files\sapinst_instdir\ERP\SYSTEM\ADA\CENTRAL\AS
jobNum=3
loadArgs= -nolog -c 0
monitorTimeout=30
orderBy=
r3loadExe=E:\usr\sap\IOL\SYS\exe\uc\NTI386\R3load.exe
sapinst=
trace=all
tskFiles=yes
CONFIG: 2010-10-29 22:39:45
List of packages with table structure: 'SAP0000'.
CONFIG: 2010-10-29 22:39:45
List of packages with views: 'SAPVIEW'.
TRACE: 2010-10-29 22:39:45 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'C:\Program Files\sapinst_instdir\ERP\SYSTEM\ADA\CENTRAL\AS\DDLADA.TPL' template file is started.
INFO: 2010-10-29 22:39:45 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'C:\Program Files\sapinst_instdir\ERP\SYSTEM\ADA\CENTRAL\AS\DDLADA.TPL' template file is successfully completed.
Primary key creation: before load.
Index creation: after load.
INFO: 2010-10-29 22:39:45
Data codepage 4103 is determined using TOC file 'D:\Ides\exportdb\db1\EXP1\DATA\SAPAPPL0.TOC' for package 'SAPAPPL0'.
TRACE: 2010-10-29 22:39:45 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSEXC' import package is started.
TRACE: 2010-10-29 22:39:45 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSSEXC' import package into database:
E:\usr\sap\IOL\SYS\exe\uc\NTI386\R3load.exe -i SAPSSEXC.cmd -dbcodepage 4103 -l SAPSSEXC.log -nolog -c 0
ERROR: 2010-10-29 22:39:46 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSEXC' import package is interrupted with R3load error.
Process 'E:\usr\sap\IOL\SYS\exe\uc\NTI386\R3load.exe -i SAPSSEXC.cmd -dbcodepage 4103 -l SAPSSEXC.log -nolog -c 0' exited with return code 2.
For mode details see 'SAPSSEXC.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
WARNING: 2010-10-29 22:40:15
Cannot start import of packages with views because not all import packages with tables are loaded successfully.
WARNING: 2010-10-29 22:40:15
1 error(s) during processing of packages.
INFO: 2010-10-29 22:40:15
Import Monitor is stopped.

BPM Monitor job in solution manager

Hi
I am trying to monitor job's with solution manager.
In the BPM (Trans' solution_manager) I config a business process and add a job to the monitor.
But there is no support massage create when the job fails.
I don't know what i did wrong.
Help
Best regards
Lior Grinberg

Hello,
The automatic creation of a notification has to be configured separately from alerting. See documentation: http://help.sap.com/saphelp_smehp1/helpdata/en/a6/a1b52fda154614ba38a17be5243b73/frameset.htm
Please also visit the Business Process Monitoring site in Service Marketplace: http://service.sap.com/bpm
I recommend to configure the Job Monitoring from within a Job Documentation. The process is described in :
a) End user documentation
http://help.sap.com/saphelp_smehp1/helpdata/en/8e/3ad6f807e147669036d2a6aed597aa/frameset.htm
b) Tutorial on Service Marketplace
http://service.sap.com/~sapidb/011000358700001911422008E.sim
Best regards,
Martin

Utility data collection job Failure on SQL server 2008

Hi,
I am facing data collection job failure issue (Utility-data Collection) on SQL server 2008 server for, below is the error message as :
<service Name>. The step did not generate any output. Process Exit Code 5. The step failed.
Job name is collection_set_5_noncached_collect_and_upload, as I gothrough the google issue related to premission issue but where exactly the access issues are coimng, this job is running on proxy account. Thanks in advance.

Hi Srinivas,
Based on your description, you encounter the error message after configuring data collection in SQL Server 2008. For further analysis, could you please help to collect detailed log information? You can check the job history to find the error log around the
issue, as is mentioned in this
article. Also please check Data Collector logs by right-clicking on Data Collection in the Management folder and selecting View Logs.
In addition, as your post, the exit code 5 is normally a ‘Access is denied ’ code. Thus please make sure that the proxy account has admin permissions on your system. And ensure that SQL Server service account has rights to access the cache folder.
Thanks,
Lydia Zhang

How to reprocess failed monitor jobs in Import ABAP phase of system copy

Hi Experts,
Can you please let me know how to reprocess the failed monitor jobs during Import ABAP phase as i am performing the import of data as part of system copy of ABAP stack.
But i have not got any errors so far as the import process is running fine but there are few jobs which are showing as failed.Hence how can i reprocess these failed jobs again.
Regards,
Dheeraj

Hi Juan,
Here you go.And i have not selected the option" Start migration monitor manually "and where as on Source system the guy has used migration monitor option in order to split the tables and ftp for transferring the export data on target system.
Is this error anything to do with that?
Import Monitor.java.log
Import Monitor jobs: running 1, waiting 1, completed 223, failed 13, total 238.
Loading of 'RSERRORHEAD' import package: OK
Import Monitor jobs: running 0, waiting 1, completed 224, failed 13, total 238.
Import.monitor.log
WARNING: 2011-04-30 02:57:31
Cannot start import of packages with views because not all import packages with tables are loaded successfully.
WARNING: 2011-04-30 02:57:31
13 error(s) during processing of packages.
INFO: 2011-04-30 02:57:31
Import Monitor is stopped.
SAPINST_dev.log
TRACE 2011-04-30 02:57:37.578 [iaxxgenimp.cpp:699]
 CGuiEngineImp::showMessageBox
<html> <head> </head> <body> An error occurred while processing option SAP NetWeaver 7.0 including Enhancement Package 1 Support Release 1 > Software Life-Cycle Options > System Copy > Oracle > Target System Installation > Central System > Based on AS ABAP > Central System( Last error reported by the step: Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.). You can now: <ul> <li> Choose Retry to repeat the current step. </li> <li> Choose Log Files to get more information about the error. </li> <li> Stop the option and continue with it later. </li> </ul> Log files are written to <code>C:\Program Files/sapinst_instdir/NW701/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/</code>. </body></html>
TRACE 2011-04-30 02:57:37.578 [iaxxgenimp.cpp:1248]
 CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
Regards,
Dheeraj

Function module to monitor Job Status (SM37)

Is there a function module or a table that I can use to monitor JOB STATUS in BW?
Thanks in advance!
Cristina.

Hi Cristina,
they are two alike SM37 giving you back the result in a table; very powerful:
BP_JOB_SELECT_SM37B            Select Background Requests
BP_JOB_SELECT_SM37C            Extended Job Selection
goto se37 with one of these. Testing mode: enter A for dialog mode. Perform some selections and execute.
Check the result and how the system has populated the import parameters.
let me know if that's what you wanted
Olivier.
Message was edited by:
        Olivier Cora

How to configure CCMS alert to monitor Authorization failures?

Dear All,
How to configure CCMS alert to monitor Authorization failures?
Thanks
Ashok

Hello,
in case you have not yet set up your monitoring infrastructure, the following link will provide you with the information needed:
http://service.sap.com/monitoring
If everything is set up (Agents are installed and connected to your central monitoring system, ...) you can go to transaction RZ21, select Technical Infrastructure - Configure Central System - Assign Central Autoreactions to set up your alerts.
For the Update errors use the MTE CLass AbapErrorInUpdate. For the Lock please use the search Option.
Regards
Christian
Edited by: Christian Rose on Apr 25, 2011 7:59 PM

How to check job failure reasons in Prime Infrastructure

We have PI version 1.3. I applied a CLI template and I saw the job's last run status is Failure in the Jobs Dashboard. But I cannot see any detail information about why it failed. Is there anyway we can see the job failure reasons? Thanks.

Thanks for the tip. Acutally I cannot see that small circle in jobs dashboard. I finally found out I need to click on the job, then click on History, then the small circle is there under the History.

Issue with E2E monitoring jobs in PI

Hi All,
We are facing some performance issue in our XI server due to some scheduled jobs which runs for very long time thus utilizing lot of resources and memory. These jobs names are like this : SPI_* (SPI_PS_ASSEMBLE_DSP, SPI_TRANSPORT) , CL_SPI_STAT* and 4393* (jobs created automatically by SAP when doing some configurations in RWB) when our XI was at 3.0,sp11 level.
Now our XI/PI server is upgraded to PI 7.0, SP10. In earlier versions, this E2E monitoring configuration was a pre-requisite for Alert configuration.
1) Let me know whether this set up is required in latest version of PI?
2) I would like to know if there is any impact for our interfaces if we delete this jobs in the current version?
3) Impact of permanently deleting the E2E monitoring jobs.
4) Impact of Alert framework dependency with E2E stuff.
5) Is there any sap notes available addressing this kind of issues?
Thanks in advance!!

Hi Prasanthi,
Thank you very much for the information. We will try implementing the note and eventually disable E2E monitoring on our development environment.
Best regards,
Jacob

How to find the reason for a job failure

Hi,
I have created a job .
It was running fine. But after few days it showed the status as broken.
How do we find the reason for a job failure ?
Thanks.

There should be a trace file in the either the udump or bdump (depending on Oracle version) directory on the DB server. If the job is broken it has probably failed 16 times, so you should have 16 trace files - each possibly showing the same error. The relevant trace files will have j00 in the name, showing that they were generated from dbms_job.
Ben

XML publisher job failure

I got this type of message
ACTION REQUIRED: XML Publisher Job Failure in qait2 Instance for Request 55086604.
what should i do this type of case?

Pl post details of OS, database and EBS versions. Did this ever work before ? If so, what changes have been made ?
Can you post the contents of the xdo.cfg file ?
Document Processor Errors With "oracle.xml.parser.v2.XMLParseException: '--' is not allowed in comme (Doc ID 388388.1)
HTH
Srini

Monitor job failure

Similar Messages

Maybe you are looking for