Monitoring Issue with firewire device (M-Audio) HELP

Essentially I am trying to hear my music track while recording live audio. I'm using my M-Audio Firewire 410 with Soundtrack Pro. This device seems to work fine with FCP, but in STP I am unable to monitor properly. I am getting input fine, but am not getting output into my firewire device. (I have selected this device as my output device, therefore STP does recognize it)
I have updated drivers. I'm running the new 5.x crossgrade on Tiger. What am I doing wrong? I've toggled every button possible!
JCB123

When you are going to record, the Recording panel pops up (with the level meter, etc). Make sure that, in the Monitor section, the correct soundcard is selected and the "Mute Project" button is not selected. That should solve it.
cp
powerbook g4 Mac OS X (10.4.6)

Similar Messages

Issue with RF device with language

Hi Exeperts,
I have issue with RF device, In SAP all screen are coming correctly with language EN and IT. But when connecting to RF with language IT unit of measure coming wrong and quantity coming blank... In language EN it is coming correctly.. I am not understanding where to fix this issue.
Please give me some guidance to fix this issue...
Regards
Maria

As suggested by Mihailo you can use the LM01 to see the screen on GUI or alternateively you can use the below steps to get the https screen
Use T-code SICF (Enter the RF service name, your technical team will help to get this name)
Step 2 Right click on the service and press Test Service
Step 3 - The above step will open the RF screen in IE, enter the user id and password and nJOY

It has been not more than 10 days since i bought iphone 5s 32gb and the finger print scanner is not detecting the prints.what to do??is it an issue with the device or iOS??

It has been not more than 10 days since i bought iphone 5s 32gb and the finger print scanner is not detecting the prints.what to do??is it an issue with the device or iOS??

Standard practices:
Restart the device (power off completely, then back on) - retest.
Reset (hold sleep wake and home buttons until apple logo appears) - you can try this, but it is most useful when your device is frozen.
Restore to factory settings - retest.
Make an appointment at an Apple retail store genius bar if the above did not resolve the issue.
HTH.

ISE integration with Mobile Device Management ( MDM ) help required

Dear Techies,
     Am here bring to your notice an different issue and no much resources to support even in PEC or Cisco Document.
     We are conduction a Proof Of Concept (PoC) on Secure Bring Your Own Device ( BYOD ) using Cisco ISE and gonna test all the scenarios like Wired, Wireless and VPN user access.
Setup Brief :
=========
      Our Setup has ISE VM acting as Admin, Monitor and Profiling Device, we have NAC 3315 physical Appliance as Inline posture Device, Wireless LAN controller, Access point and the Identity source as Microsof Active Directory
     Having Plans to Integrate Mobile Device Management ( MDM ) and Citrix VDI setup also.
Activity Brief:
=========
     As of now we have tested the Wired Scenario Authentication and authorization for guest users and gonna carry out the profiling and posture.
Clarifications Required
================
Wired Scenario - Require some configuration / steps on how to carryout posture for the guest wired users i.e. LAPTOP.
Wireless Scenario
MDM can be integrated to ISE ?
How the MDM can be integrated to Cisco ISE configuration or Guide to show the same?
What is the demarcation between MDM and ISE ( i.e. What is the role of ISE and MDM on Mobile Devices ) ?
If MDM is available so then when the control of ISE ends, does MDM do management or ISE will do management of the devices ?
Is MDM will do client provisioning or ISE should do ?
Is MDM send or update patches of Mobile Devices ?
As of now these are the scenarios, kindly revert if any good documents to show this or share your expertise on the Integration Part.
Thanks for Reading...
Arun

I would like to avail your valuable inputs to understand on the Client provisioning part for the Mobile Devices/ Laptop. I understand from your reply that MDM integration is not available in the current release ISE 1.1 - That is correct.
Kindly let me know your views or any documents on the following scenarios with the current release in mind
1. User with Mobile devices connecting to Wireless ( both Employee and Guest ) , How the Flow differs for the Employee and Guest. How the client provisioning is done ( i.e. Like Posturing or Compliance Check ).
The posturing and compliance check is done based on the user authentication information (i.e. AD memberOf vs Guest user) combined with the users endpoint (windows, mac osx, or a mobile device), ISE then has a few decisions to make based on the authorization policies. For example, if a Domain User coming from a Windows 7 machine joins the network, then can either use the nac agent, or the web agent. Then you can scan for registry settings, file settings, program requirements, hotfix compliance...and the list goes on. If the user fails a check then you can either assign an acl for the user so they only have guest access, or you can place them into a remediation vlan the options are entirely up to the requirements and however the solution is implemented.
2. User with Laptop connecting to Wireless ( both Employee and Guest ). How the client provisioning is done ( i.e. Like Posturing   or Compliance Check ).
Guests are usually redirected to the guest portal which they authenticate and their user group falls within the Guest container that is on the ISE internal database, that is usually coupled with an authorization profile that grants them internet access. For the client provisioning, that is usually done based on the operating system, via profiling (dhcp, and user agent string., netmap...etc) and can be fine tuned for all laptops or to a specific set of users based on their group membership.
3. What are advantages of having ISE also in place for Mobile devices, since most of the Mobile related tasks ( like Authentication, Authorization, Profiling and Posture ) are carried out by MDM. I am checking for the significant advantage of having ISE for Client network having only Mobile devices. Kindly clarify.
Currently the advantage of Cisco ISE is that it supports profiling within wireless and really fits well within a network that has mostly Cisco products since they are all part of of the Borderless security initiative being driven on the backend. The product teams for wireless, wired, security (vpn..etc) and ISE are pretty close in building their solutions so that you can get connected with any device any where (sorry for the sales pitch). The latests wireless code is improving and is going to have support similar to the ios sensor for wired devices where dhcp, cdp, and other attributes can be sent in the radius packet for better profiling decisions. With integration for an MDM platform coming soon, and also support for TACACS rumored (have to verify with your account rep) you have options that really stand out from a unit that only supports MDM. Cisco ISE also comes with a wireless product ID so that makes the budget work when it comes to deploying ISE if you arent looking for enforcement on your wired devices.
4. Do you recommend 802.1X Authentication to use for the Employee and Contractor? The Guest user authentication as Open ?
For internal users and vendors the best option by far is dot1x, almost all operating systems are capable of performing dot1x and the 1.1.1 MR has a piece now that can provision the supplicant for the users, by using scep to enroll certificates or configure peap settings.
There is a feature within the guest portal that allows you to statically assign guests into endpoint group, that feature is called device registration web authentication. It seems like an open network but uses mac filtering to assign these devices to an endpoint without requiring users to enter any credentials. They are presented with an AUP page, once they accept their mac address is mapped to the endpoint group
5. How can we ensure the Encryption of traffic from the Guest user to the NAD ( Network Access devices ) ?
This may be a wireless question but I am sure the encryption is done using AES and using dot1x as the key management here is a brief background for this - http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00807f42e9.shtml#L2
You can also use the anyconnect client which can provide macsec which is layer 2 encryption for wired - http://www.cisco.com/en/US/prod/collateral/vpndevc/ps6032/ps6094/ps6120/qa_c67-622477_ns1049_Networking_Solutions_Q_and_A.html
6. We are also looking for VDI ( Citrix, VMware ) solution for the client ( both Employee and Guest ) , how ISE can play a role in securing the VDI environment.
For most thin clients you can perform dot1x authentication on the device itself, however that is something the manufacturer will have to support. This is a little gray for me.
7. Is that any integration required with Citrix or VMware. How the VDI can be offered based on the User role ( i.e. Employee, Contractor or Guest ), since Guest database is available only with ISE, how the checks are made from the VDI environment.
IN ISE there is an identity sequence which can authenticate users in AD first, if the user is not found then it can look in the internal database.
Our solution demands MDM in the integrated solution, As on today ISE cant be integrated with MDM. so what kind of solution we can propose to have MDM and Cisco ISE .Do the clients now enter the network should have already installed the MDM agent (or) any other way of pushing the same to the Client.
Today there is no integration between the devices, the last release time I heard was December for this feature. However it would be best to confirm with your Cisco Account rep on this issue.
Thanks,
Tarik Admani
*Please rate helpful posts*

Issue With Receiving Calls. PLEASE HELP!!!!

For the past couple of months both lines on my account have been experiencing issues. Randomly, when someone attempts to call one of the 2 lines (me or my wife), they receive the "Thank you for calling Verizon Wireless. The number you have reached has been changed, disconnected, or no longer in service." They then have to call back (sometimes multiple times before they can get through). I experience it when I call from my mobile to my wife's phone as well. It is become quite a pain and VZW has been NO help at all!!! They claim I am in a marginal service area. There are multiple problems with that statement.
1. I am in a great service area and I always have full service.
2. The problem does not always occur in my home service area!!!
The rep then changed her mind and said it must be equipment, however my wife has been through 3 different phones within the past couple of months.
She then recommended I changed carriers!!!!! This really upset me as I have Verizon service for everything (VZW and FiOS).
Can someone please recommend any kind of solution????

jnd1020 wrote:
For the past couple of months both lines on my account have been experiencing issues. Randomly, when someone attempts to call one of the 2 lines (me or my wife), they receive the "Thank you for calling Verizon Wireless. The number you have reached has been changed, disconnected, or no longer in service." They then have to call back (sometimes multiple times before they can get through). I experience it when I call from my mobile to my wife's phone as well. It is become quite a pain and VZW has been NO help at all!!! They claim I am in a marginal service area. There are multiple problems with that statement.
1. I am in a great service area and I always have full service.
2. The problem does not always occur in my home service area!!!
The rep then changed her mind and said it must be equipment, however my wife has been through 3 different phones within the past couple of months.
She then recommended I changed carriers!!!!! This really upset me as I have Verizon service for everything (VZW and FiOS).
Can someone please recommend any kind of solution????
First, you really should consider calling another representative and report your disatisfaction with that prior rep. Advising you to switch carriers was in poor taste. They are trained quite thoroughly to assist customers to the fullest and not advise leaving VZW. Secondly, if the issue has transcended the device in that it has happened through multiple esn changes (your wife has been through 3, you wrote), then it obviously is not the device. Next, if you are experiencing intermittent issues with this in an area that otherwise works fine, it probably has nothing to do with the service coverage; if the coverage was a problem, you either would be unable to make a call at all, would have multiple dropped calls, or would experience an increasingly degraded call quality. This tells me that it has to do with the phone's connection to the network, which an over-the-air program attempt might resolve (*228, option number 1 - you could even possibly get away with option number 2) like the prior individual explained above. The likelihood is that you are going to need to file a trouble ticket with your lines, which can only be done through technical support after going through the initial level of troubleshooting through customer care. You really should call them again, with this knowledge backing you up.

Today I get issues with thte device. When I in a phone call, the screen don't auto turn off. There is no a screen protector on there and it seems that the built-in proximity sensor is not responding. I have to press the screen with my face accidently.

today I get issues with my z10 device. When I in a phone call, the screen don’t auto turn off. There is no a screen protector on there and it seems that the built-in proximity sensor is not responding. I have to press the screen with my face accidently. can anyone help me with this?

Same issue already several weeks.
And we are not alone:
http://forums.crackberry.com/blackberry-z10-f254/proximity-sensors-still-not-working-my-z10-891783/i...
At all there is, I think, 4 threads in parallel about this issue at CB forums. One of the:
ms.crackberry.com/blackberry-z10-f254/proximity-sensors-still-not-working-my-z10-891783/index5.html
I already contacted BB Help at Twitter. Answer:
Thanks for the information. It seems that you have installed an OS version higher than the one supported by your carrier on your device. Please contact your carrier to get the supported OS version and try the proximity and light sensors. Let us know if you need further assistance. Cheers. ^LFC.
I did replay:
You are confused me. Phone got updates over network automatically. On crackberry forum a lot of people from different countries and with Different OS version, but with the same problem. Hi, this is thread at CrackBerry: http://forums.crackberry.com/blackberry-z10-f254/proximity-sensor-906493/index3.html
This my replay was 22 of march. No more answer from BB.
I can't contact my operator - 3UK, because I bought my from on Amazon from Amazon. This phone not from operator - seller is Amazon.
What I already done:
For last week, I read, how to install OS using Sachesi and Autoloader. I used Sachesi to load 3 UK version, I installed autoloader from this links:
http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...
This
For Z10 models STL100-1, 2, -3, -4: Download 10.2.1.1925
Doesn't help
And this:
For Z10 models STL100-2, -3, -4: Download the 10.2.0.1803 OS
No result.
After install all of them phone wants to update to 10.2.1.2102 by air.
BBVE in all versions sais: Can not obtain data from sensors.
Dear BB support, please, can you explain, how to resolve this issue?

Terminal monitor issue with 3750

I'm having an issue with term mon not displaying messages. I enable term mon on telnet connection and have checked the log settings and monitor is set as debugging. I am mainly interested in seeing line up/down status so I set a couple of interfaces logging event link-status. Maybe I've misunderstood how to do this. Thanks for the help.

Based on the output, you don't have terminal monitor enabled:
Capabilities: none
Here is my output:
Rack1SW1#sh term | i Capa
Capabilities: none
Rack1SW1#term mon
Rack1SW1#sh term | i Capa
Capabilities: Receives Logging Output

Multi monitor issues with resolution(?)

At a customer I have got a really strange and annoying problem. The customer has got a Hyper-V VM with 2012 R2 Server as a RDS server aka Terminal Server.
One user has got issues with his multi monitor setup. The connection settings seems to be OK. It is set to full screen and the checkbox for the multi monitor configuration is enabled. Theoretically this works because the user sees a correct setup with one
primary display and one secondary display. The settings itself are correct.
1. Primary display: 1680*1050
2. Secondary display: 27" 1920*1080
The display settings on the client are nearly the same except that the numbers of the two monitors are different (those numbers you get when you click identify at the resolution change window). On the Windows 7 client the primary display
number 2 and the 27" has got the number 1. On the Terminal Server the primary display has got the number 1 and the 27" display has got the number 2. But the corresponding resolution at the display number is correct.
Now the problem. Everything seems fine, the desktop is expended. But when the user is "touching" the top or bottom edge of the screen the display is scrolling (in full screen) - like in a 3D game scrolling over a map. The user told me that
both screens are scrolling equally at the same time. I am not sure but the user told me that if he is going to the bottom the CLIENT task bar appears. Changing the task bar of the client to fixed the user told me that the task bar will always show up. - Strange
that CTRL + ALT + BREAK does not work.
I tried to press CTRL + ALT + BREAK twice, changing the resolution to a fixed value and back to full screen again, changing the primary display to the new 27" monitor, adding smart sizing:i:1 to rdp file and upgrading the Intel HD
4600 laptop graphic drivers (must be downloaded from Lenovo :/). NOTHING helped :(.
But this strange behavior does not exist on the client. Opening two programs (simple notepad e.g.) on each display and maximize them and moving the mouse the screen borders won't show this problem. It only exist on the remote session.
Now the "funny" part. If I connect with Team Viewer to the client the problem disappears as long as I am connected. If I disconnect the problem shows up again.

Hi,
This is most likely a problem with the local machine's graphics driver and monitor configuration. I would suggest trying different things like removing and re-installing the display adapter and its drivers, removing the second monitor/restarting/adding
the second monitor back, adjusting the multi-monitor settings in display properties (changing between extending the desktop to the second monitor and not), undocking/restarting/docking, changing between different modes using Fn key on laptop (if laptop), etc.
The behavior under Team Viewer is likely because the graphics configuration is different when the driver is active.
I wish I could give you more precise instructions on how to resolve the issue. I have seen this behavior (panning desktop, multi-monitor config not exactly right) probably 3 times over the last 5 years, always with a laptop, and I had to "play"
with the settings before it finally went back to normal. The instances I have seen it occur did not involve Remote Desktop specifically.
-TP

Connecting Live!Value to GD580 - issue with DTS 5.1 audio

I connected my Li've! Value?through the digital out connection to the coaxial input of GD580. According to this: http://forums.creative.com/creativel...message.id=270, everything should be fine, I should get surround sound on proper source, and I nearly achi'ved that, except for one irritating issue with the DTS 5. Audio.
When I pass through the DTS 5. signal to the GD580, cracking sound would be heard, and the GD580 intermittently recognises the signal as DTS in a second, and loses it in the next, making intermittent sounds. This happens to some of the DTS audio that has a bitrate equivalent to or higher than 500kbit/s.
For other DTS that is below 900kbit/s, the sound is clean, 5.. Sorry, I don't have anything?between 900 and 500 kbit/s to test.
Now, when I let the software decode the DTS itself to LPCM, the sound is clean again, as clean as heaven, but it is no longer surround - only stereo as picked up by the GD580 decoder.
To make it more confusing, AC3 signals work great, without the need to decode within the computer domain, and is surround on the speakers side. I have to admit, though, that most AC3 I have is below 700kbit /s
Please anyone having solved this issue before, help me. I want to hear DTS5. surround on my GD580 - it has only this SPDIF connection for surround, the other input is STEREO only.
Could the problem be attributed to Li've!Value or GD580 not being able to handle high bitrate data stream?
Thanks a ton, Creative lover folks

If you can find a 0-pin socket on Li've! card board, then you can connet your card output internally to the case audio/mic ports by following instructions given @ http://audigy2zshowto.blogspot.com/
NOTE: pin orde may be different on Li've! (instructions are for Audigy 2 Zs, but works well least w/ Audigy 2 card too (I have done this)).
jutapa

Can see and recognize my wireless network and Internet is working, but I can't connect with ANY computers/iPad/iPod/air TV, etc. I have reset the time machine several times, and can see the network, but cannot access it with any device. PLEASE HELP!

I have Comcast Internet and have it connected to a Motorla Surfboard modem and have that running directly to a 2TB Time Capsule. The TC is serving as our time machine as well as our wireless router. We lost power in a storm a week ago and can no longer connect to my wireless network I can see the network and sign into it via password, but cannot connect with any device(iMac, MacBook, iPhones, iPod touches, air tv, etc.). ALL of these devices worked gat before the power went out. I reset both modem and TC and still can't connect. I can connect to the Internet through Ethernet cord directly from the modems dn have confirmation(per Comcast service) that the Internet is working and we have a good connection.
The TC is less than six months old so I'm not sure what is wrong. I have reset settings with TC to no avail. I have reset the TC SEVERAL times and have no idea what could be wrong and what is prohibiting me from connecting. Anyone that has ANY suggestions or ideas as to how to fix this, PLEASE HELP!!! I'm going crazy using iPad 3G and not being able to connect to our wifi. THANKS FOR YOUR TIME AND I LOOK FORWARD TO GETTING BACK TO THE 21ST CENTURY!

Anyone have any ideas or information to help with this? Any help and consideration is MUCH appreciated.

Dual monitor issue with 10.8 and Windows 7 (bootcamp)

I've a read a lot of threads here about people having nightmare-ish problems after upgrading. Thankfully, this isn't one of them, just a frustration that I'd like advice on.
My system: 2010 13" MBP, 2.4GHz Intel Core 2 Duo, 8GB RAM, 320GB HD. Work setup has external 17" Dell Widescreen monitor connected with VGA to miniDisplay adapter. Home theater setup has 23" Dell monitor connected with HDMI to miniDisplay cable.
I upgraded from 10.6.8 to 10.8, as I like to stay up to date and it seemed ML fixed many of the Lion issues. After finding out Front Row is completely gone I just about reverted (my laptop doubles as my home theater control). I found XBMC, and it works, sort of (anyone with news on whether Front Row will be returned to us, let me know!).
Enough babbling, my issue:
When I switch from bootcamp windows 7 back to OS X, my second monitor's resolution is all screwed up (very low) and the dock and menu bar are BOTH on the second (Dell 17") screen, though it's not in a mirror mode.
Usually the dock is on the laptop screen, and the menu bar is on the second.
All I have to do is unplug the miniDisplay port and plug it back in, but is there a setting I'm missing to keep me from having to do this? Also, I've never used Windows at home, so I've never had to switch with the 23 inch monitor connected. Don't really want to try as that system is working quite well right now.
Thanks!
-Rob

It's NVidia GeForce 320M.
Just checked the drivers page and the Mac side only lists up to 10.6.8
Should I assume that the update needs to be on the Windows 7 side? At one point last November I tried to update on the Windows side and it caused all sorts of **** on my system causing me to have to reinstall both OS X and 7.
May be worth another try?
-Rob

Multi-monitor issue with CS4?

Hi; I'm running a Mac with the following specs:
3 x 30" ACD
MacPro 2,8 Ghz Quad
2x ATI Radon 2600 XT graphics cards (2 screens attached to 1 card; 1 screen to the other card)
I've encountered after the switch from CS3 to CS4 the following issue:
Whenever I try to use the new Bridge Review function using one of the the screens sharing one graphics card I just get a grey screen.
If I move the bridge window to the solely attached screen it works.
Is that an issue of CS4 or is just the throughput of the second graCard providing 2 monitors not sufficient.
Thanks t.

T,
There are known issues with using more than one graphics card which Apple has not truly resolved. You may want to browse some of the threads in the Adobe Photoshop Macintosh forum.
In addition, you should know that Photoshop and Bridge cannot really take advantage of more than one graphic card.
http://forums.adobe.com/message/1540485#1540485
This bit of information in relation to GPU and OpenGL features and
limitations in Photoshop CS4 had totally escaped me until now. Though
it doesn't affect my setup, it might be of interest to others who may
have missed it too.
Excerpt from
http://www.adobe.com/go/kb404898
Q. Does Photoshop take advantage of dual-GPU display cards?
A. Not at this time.
Q. Why can't Photoshop take advantage of more than one display card?
A. When you move an image window between two monitors that are
each on a separate display card, the GPU attached to the second monitor
does not have access to the data necessary to accelerate drawing. The
SLI and Crossfire technologies that use more than one GPU to speed up
full-screen games will not work with Photoshop, because their use is
limited by design to accelerate only full-screen games.

Issue with Android devices - cannot connect to Fac...

Good morning.
I have an issue with android phones and a tablet not being able to connect to Facebook etc on our home wifi. Everything works on other wifi and the signal strength is good.
Did get it to work for an hour after a pin reset, but that did not last.
An hour on the phone to BT help yesterday, set the channel to 2.4ghz but that made no difference and no more ideas from BT it seems.
Was told by the BT man not to do a pin reset as it wears out the router, apparently.
Any help greatly appreciated.
Thanks.
Solved!
Go to Solution.

do you have parental controls active? if so turn off
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Having issues with multiple devices connecting to AirPort

Hello All
I'm having an issue when people come to visit. It seems my network goes haywire once they get here with their devices.
My network consits of an Airport Extreme and two Airport Expresses connected to a cable modem. On the network I have two iMacs, Mac Pro, two TiVos, Xbox 360, Foscam Secutity camera, two iPad minis, iPod, iPhone 4S and an iPhone 3GS. They are all connected to the main network login.
When guests come over, most weekends my girl and her daughter, they have two iPhones, and iPad 2 and an iPad mini. Once they get here, we all seem to get knocked offline. Some devices stay connected at times, but most, if not all, get knocked offline. I assumed it was something wrong with one of their devices. They connect with the Guest login.
This weekdend we had some friends visiting and my girl and her daughter were not here. These friends showed up with two iPhones, a MacBook Pro, an iPad mini, iPod and a kindle. Same thing happended...all knocked off line. They also connected with the Guest login.
Are there limits to the number of devices? If so, I wouldn't think I am hitting that limit, could it be that low?
Thank you in avance for any input or assistance.
Cooch

I have the Express units that look like a white AppleTV. Not the ones that plug directly into the wall, they have a power cable. I believe they are 2nd Generation.
Yes, those would be 2nd generation Express base stations and they should be able to support up to fifty wireless connections.
Are both of these connected back to the Extreme with a wireless or wired connection? Regardless of which are they both configured to extend the Extreme's Wi-Fi range?
I am assuming that you have this network configured to also support a guest network ... correct?
The Extreme is not the latest tall one, it's the one just before they released the new one.
That should make your Extreme a 5th generation model, which is just fine.
Do the Express devices count as wireless connections?
Yes.
Even if I include the Express devices, I have 14 connections. If two people come to my home with two devices each, I am still under 20 connections. All Airports and devices are on the same level of the house, approximately 1000 square foot area, with open doors into every room.
Yes, according to the number of devices you stated, this should work.
The only idea I have at this time is to temporarily disable the guest networking feature. Once done, see if you still have the issue. Do you?

Major issues with nforce3 250GB IDE controller: help needed

I am currently facing the following issues with the IDE controller of the Nforce3 250GB:
1.   On random occasions, the PC hangs on the BIOS boot logo (Platinum) and fails to detect the IDE drives.
2.   In most of the above cases, one of the PATA drives (generally the Seagate ST340016A) is not detected.
3.   Sometimes, the PC shows a faded ‘Windows XP’ boot logo and gets stuck there.
4.   Occasionally, the PC boots successfully into Windows but runs slower than a 386 (All IDE read/write operations take an eternity to complete)
I have thoroughly checked all the drives using Seagate SEATOOLS and Samsung HUTIL (done a complete surface scan and IDE cable checks) and found no errors.
All the drives are configured using the ‘Cable select’ option on their respective jumper terminals.
Here is a short summary of the drives:
Samsung SP0802N (boot drive), PATA primary master (Cable select)
Seagate ST340016A PATA primary slave (Cable select)
Seagate SATA drive with 2MB cache (shall update model number soon)
Optical drives:
Asus CD writer Secondary master, cable select
Asus DVD Rom secondary slave cable select
--Total 4 PATA devices, 1 SATA device NO RAID
All the drives have been checked thoroughly. They are working fine. However, the motherboard fails to detect them on random occasions.
I have tried resetting the CMOS.
Configuration:
Athlon 64 3000+ E6 core with SSE3 support
MSI K8N Neo2-FX BIOS 1.C
1GB dual channel kit Corsair TWINX1024-3200C2 running at 2.5-3-3-8 @ 2.75 V
XFX 7600GT AGP (1.5V AGP)
Seagate ST340016A 7200 RPM PATA
Samsung SP0802N 7200 RPM SATA
Seagate 80GB SATA Drive with 2 MB cache
ANTEC Smartpower SL450 450 watt PSU
Windows XP Home Edition SP2 + all updates
Latest drivers for everything

Hi,
I am back here after a long long time Now a days, I run a Intel 965P based Core 2 Duo as my primary desktop. I still use my AMD64 platform and I did fix all the issues with it!
Sorry, I didn't update this thread earlier with the details of how I had solved those issues...
Well, initially I could not get my Radeon 9600XT to work on the nforce 3. I dirched it and got a 7600GT and that solved the GFX crashes..
The HDD problem (the one that I described in this thread) was fixed by:
1. Using the SATA ports 3 & 4 instead of SATA1 & 2!!!
Apparently, the issue of the cyclic reboot & the faded XP logo crash during reboot happens with a lot of Nforce 3 250 owners.
Using the other set of SATA ports fixes this for good...
I also replaced the 40GB Seagate ... But that wasn't the cause of this issue, because the cyclic reboot recurred with the remaining HDDs when SATA1 & 2 were in use...
Motherboards are really quirky, I admit

Monitoring Issue with firewire device (M-Audio) HELP

Similar Messages

Maybe you are looking for