Monitoring the changes on a big number of variables

I have approximately 100 variables in my LV project. What I want to do is to log any change on any of those variables. The way I started to do was to put a copy of those variables inside a loop and at each iteration I check if their current values are equal to theithe previous ones, using the "Add Shift Regiter" functionaly of the loop. However, I think it will become a huge mess when they are all there...
Does anybody know a better way to do it? I'm thinking about a better solution, but couldn't find it yet...
Thanks!
Daniel

Give us more to work with ... how many different kinds of variables? It sure makes things a lot easier if you can simply build a 1D array with 100 elements of dbls than if you had 100 different variables of 10 different data types. Either way, the first step is to group your data into groups that make logical sense with your data flow. Then you can work from there.
PaulG.
"I enjoy talking to you. Your mind appeals to me. It resembles my own mind except that you happen to be insane." -- George Orwell

Similar Messages

Monitor the changes of Ship to address in Sales Order

Hi,
My client has an requirment which they would like to monitor whether the ship-to-address has been modified after the order were save.
e.g.
Sold-to 12345
Ship-to 12356
SAVE the order
After the order are sale and sometime later, the user went in VA02 and update the ship-to-address to 23456
now
sold-to 12345
ship-to 23456
It there anyway we can have a report to check if the ship-to has been changes?
thanks,
Rebella

Hello Rebella,
The best option of monitering the changes incurred fro the Ship-to-Party details of a SALES ORDER are as follows:
If you are interested to pick up the information of changes values of Ship-To-Party from a Sales Order then i think you can use the table VBPA. This table will contain the updated value of Ship-To-Party partner function of a Sales Order.
Second option would be to use a program which actually run when you open a Sales Order in VA03 --> Environment --> Changes. You can develop a t-code which shall call this program.
You can also use the T-code AUT10 for tracking changes for a Sales Order.
Hope these infotmation helps you in resolving your issue and please don't forget to mark your thread as closed.
Regards,
Sarthak

I am measuring resistance changes using hp 4284A LCR meter. I want to monitor the changes continuously by drawing a graph.Can I?

I am measuring resistance changes in chip using hp 4284A LCR meter. The LCR meter is connected to the PC through IEEE488. I am using Labview 6.1 and window 2000. I want to monitor the resistance changes continuously and get a XY graph about it (the X-axis should be time as a unit of second). It should be also saved as an excel file. Please help me to do this work. I appreciate any help.

You might consider a chart, instead of an X-Y graph. You don't need to supply an x-axis array, if your samples are evenly spaced in time.
A chart gradually (or rapidly) moves from right to left, with new values appearing on the right, and old values disappearing off the left side.
This sort of thing is what LabVIEW was designed for. What specifically, are you having trouble with?
Steve Bird
Culverson Software - Elegant software that is a pleasure to use.
Culverson.com
Blog for (mostly LabVIEW) programmers: Tips And Tricks

Blocking the change of Supplier Invoice Number on update using SP

Hi Mentors,
Just wondering if blocking the change of Supplier Invoice No. (OPCH.NumAtCard) is possible using SP_TransactionNotification?
I've been trying to make it work with the following code:
--Prevent Duplicate Supplier Ref. No. in AP Invoice
if @object_type = '18' and (@transaction_type in ('A' ,'U'))
begin
declare @RefNo as varchar (100)
declare @CardCode as varchar (100)
     if (@object_type = '18')
          begin
             select @RefNo = NumAtCard, @CardCode = CardCode from OPCH T0 where docentry = @list_of_cols_Val_tab_del
             begin
               if (@RefNo is not null)
                 begin
                   if 1!= (select count (docentry) from OPCH where (NumatCard = @RefNo) and (cardcode = @CardCode))
                     begin
                        select @error = 10
                        select @error_message = 'Duplicate Supplier Reference Number!'
                     End
                   End
               End
          End
End
--Prevent Supplier Ref. No. in AP Invoice from being changed during update mode.
if @object_type = '18' and (@transaction_type = 'U')
begin
declare @DocEntry as int
     if (@object_type = '18')
          begin
             select @RefNo = NumAtCard, @CardCode = CardCode , @DocEntry = DocEntry from OPCH T0 where DocEntry = @list_of_cols_Val_tab_del
             begin
                   if (@RefNo != (select NumAtCard from OPCH where (CardCode = @CardCode) and (DocEntry = @DocEntry)))
                     begin
                        select @error = 10
                        select @error_message = 'Changing of Supplier Reference Number is not allowed!'
                     End
                   End
          End
End
I'm not sure if this is really possible,and that I could be just beating the wind by trying.
Thanks in advance!
Sean

To avoid modifiing the vandor reference use this:
IF @Object_type = N'18' and @transaction_type = N'U'
BEGIN     ---
declare @li int
declare @pref nvarchar(100)
set @li=
(select max(t.LogInstanc)   from ADOC t
   where t.ObjType=18 and t.DocEntry=@list_of_cols_val_tab_del)
set @pref=
(select isnull(t.NumAtCard,'')    from ADOC t
    where t.ObjType=18 and t.DocEntry=@list_of_cols_val_tab_del
      and t.LogInstanc=@li-1)
If @pref !='' and @pref !=
(select isnull(t.NumAtCard,'')   from OPCH t
   where t.DocEntry=@list_of_cols_val_tab_del)
Select @error = 10, @error_message = N'Changing of Supplier Reference Number is not allowed!'
END
--- To avoid using duplicated reference try this:
if @object_type = '18' and @transaction_type in (N'A', N'U') -- AP invoice
BEGIN          ----
declare @Invoice AS VARCHAR(15)
declare @Card AS VarChar (20)
SELECT @invoice = NumatCard, @card = CardCode FROM dbo.OPCH
     WHERE DocEntry = @list_of_cols_val_tab_del
If exists (SELECT T0.cardcode, T0.NumatCard FROM OPCH T0 where T0.NumatCard = @invoice
           and T0.CardCode=@card and T0.DocEntry!=@list_of_cols_val_tab_del)
Select error = 10, @error_message = N'Duplicate Supplier Reference Number!'
END          ----

How to monitor the progress of an ORDER Number

Hi,
How can I Monitor the progress of an order from the EBS.
Thanks
Asis

I assume you mean sales order.
You can open the order header and go to tools > workflow status.
It will show you when the order was entered , was booked and closed.
You can also see details of all lines for the order.
If you want to see status of a line, You can also go to line and go to tools > workflow status
It will show you when it was entered, when booked, when it was progressed to next stages, and closed.
Hope this helps,
Sandeep Gandhi

Report to Monitor the change of delivery address on the delivery document

Is there a report that can show me when a user had changed the delivery address in a sales document or delivery document. The ship to # would stay the same but the address can be changed within the sales document which does not effect Master Data records.
We are trying to moitor this to find where users have modified the address when shipping a delivery.
Thanks

Grant,
I was unable to find a solution to your problem. I think it is unlikely that this change
when a user had changed the delivery address
is explicitly recorded by SAP. In the systems I looked at today, address changes in Sales docs are not among those that are automatically recorded.
You can, however, look in table VBPA. If an address has been entered manually (vs the normal automatic determination via customer master tables), then VBPA-ADRA is changed to 'E'. Unfortunately, I can't find any place where this event is time-stamped, or the user responsible is recorded. You might be able to intuit the user using other means.
Regards,
DB49

How to Monitor a Change in an Array

I have a class called Array, and this class is just able to add or remove an Object to/from the array.
But I need to automatically increase the size of the array when a new Object is inserted to the array with full capacity. And I don't want to change any codes for current add and remove methods. So to do this, I think I have to be constantly monitoring the changes in the array somehow. How do I do this?
Thank you.

Is this for a class, and are you prevented from using ArrayList or other classes from the Collections group?

When I had a PC I simply took the wire going to my monitor and connected to my big screen TV to watch Netflix movies...How do I take them from my IMAC and connect them to my TV now?

When I had a PC I simply took the wire going to my monitor and connected to my big screen TV to watch Netflix movies...How do I take them from my IMAC and connect them to my TV now?

This could be problematic.
It will depend on what model of iMac you have.
You may want to post machine info.
blue apple > about this mac > more info button. Click on the hardware line. It has a little triangle in front of the work hardware.
Leave out the serial number.
Example:
Machine Name: iMac
Machine Model: PowerMac4,1
CPU Type: PowerPC 750 (33.11)
Number Of CPUs: 1
CPU Speed: 600 MHz
L2 Cache (per CPU): 256 KB
Memory: 768 MB
Bus Speed: 100 MHz
Boot ROM Version: 4.1.9f1
Most of the iMac's have sometype of video output port on the back. You will problably need a converter.
The 'hollywood' industry has been making it more difficult to get video out over time to prevent copying.
Robert

I was gifted a app store 50$ gift card but it wont let me use it because I'm in the UK store. I can't change my location because of the credit card associated with the account and my phone number please help

I can't change my location because of the credit card associated with the account and my phone number please help

Gift cards are country specific.
They can only be used inside the borders of the country of issue.

Can you change the legth of time (or number of rings) it takes for on iphone 4 to time out making an outgonig call?

Can you change the legth of time (or number of rings) it takes for on iphone 4 to time out making an outgonig call?
Mostly it's to call in for radio contests. The Iphone is really good at making a quick call, but it seems to timeout after 15-20 rings. I realise this is a small thing, but free tickets is free tickets.
Most commenst I see is abotu incoling calls, not outging.
Thanks.

No. You can't do this with any phone.

How do I change a cell phone number on my iPad. I have a new cell phone number and want to use the iCloud

How do I change my cell phone number on my iCloud account with my iPad? I have a new number and want to activate the iCloud

If you're talking about the phone number on your iPad for iMessage, the number is associated with the ID when you turn on iMessage on your iPhone. If the number is incorrect, try turning off iMessage on your phone, wait a minute or so, then turn it back on.

If I change my iPhone phone number can I use the same iTunes backup?

If I change my iPhone phone number can I use the same iTunes backup?
Keeping iPhone 4, just want to change number and keep settings and all that. Is it possible?

yes

In working on a simple home budget, how can I change the color of a negative number to red, during the period the number is negative. Thanks,

Using Numbers spreadsheet and In working on a simple home budget, how can I change the color of a number to RED when it comes up negative. (only during the time that it's negative) Thanks, ( I hope I did this right!!)

The Inspector offers choices of format for negative numbers when you choose Number of Currency as the format for a cell. Also offered when the format is set to Automatic, IF the selected cell(s) contain number(s).
The choices are in the pop-up menu beside the box for number of decimal places.
Regards,
Barry

How we can limit the number of concurrent calls to a WCF service without use the Singleton pattern or without do the change in BizTalk Configuration file?

How can we send only one message to a WCF service at a time? How we can limit the number of concurrent calls to a WCF service without use the Singleton pattern or without do the change in BizTalk Configuration file? Can we do it by Host throttling?

Hi Pawan,
You need to use WCF-Custom adapter and add the ServiceThrottlingBehavior service behavior to a WCF-Custom Locations.
ServiceThrottlingBehavior.MaxConcurrentCalls - Gets or sets a value that specifies the maximum number of messages actively processing across a ServiceHost. The MaxConcurrentCalls property specifies the maximum number of messages actively
processing across a ServiceHost object. Each channel can have one pending message that does not count against the value of MaxConcurrentCalls until WCF begins to process it.
Follow MSDN-
http://msdn.microsoft.com/en-us/library/ee377035%28BTS.10%29.aspx
http://msdn.microsoft.com/en-us/library/system.servicemodel.description.servicethrottlingbehavior.maxconcurrentcalls.aspx
I hope this helps.
Rachit
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

When i send a imessage it sends it from the number that was on the sim before i transfered my number how do i change it to my number?

when i send a imessage it sends it from the number that was on the sim before i transfered my number how do i change it to my number?
ive tried to change it in message settings but the number is grey so im unable to de-select it ?
any ideas?
cheers Dan

Hello joinerdan,
It sounds like you are unable to change the phone number that Messages is sending messages from because it is grayed out. I recommend the steps outlined in the following article named:
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
Unlink a phone number
To remove a phone number from an Apple ID, sign out of FaceTime and Messages on your iPhone:
Settings > Messages > Send & Receive. Tap your Apple ID, then tap Sign Out.
Settings > FaceTime. Tap your Apple ID, then tap Sign Out.
This should remove your phone number from other devices using the same Apple ID with FaceTime and Messages. If the phone number is still available on other devices after you sign out of FaceTime and iMessage on the iPhone, you may need to sign out of iMessage and FaceTime on all your devices, then sign in to FaceTime and Messages again on devices you want to use.
Note: If you no longer have access to the iPhone that is using the number you want to remove, reset your Apple ID password.
Thank you for using Apple Support Communities.
All the best,
Sterling

Monitoring the changes on a big number of variables

Similar Messages

Maybe you are looking for