Monthly Statement- Detailed usage per line question

Hopefully someone can clear this question up for me because I've asked several times and there are a few things that don't many ANY sense about what I've been told. If your viewing your monthly statement, it shows you the detailed usage per any line on your account. If your looking at one line, there are several different columns. The two that I have a question about are the "Origination" and "Destination" . I guess I'll start with, if you place a phone call to someone, your line would be where it originates from (the nearest location to a tower) and the I'm assuming the destination implies the person your callings location. Is that right?
Also, does this only apply for Verizon to Verizon phone numbers?
I'm so curious and asking because I know that one of the numbers location is NOT accurate at all. However, I don't know if it has anything to do with that phone number not being a Verizon phone number, or if I'm just not understanding how those two columns work.
I'd appreciate it if someone could break this one down for me a little better.
Thanks so much, ahead of time

    I've had the SAME questions you have, haleyvictoria! I'm very glad you asked. Yes, the Origination and Destination columns do determine approximate locations of the caller. However, the Origination determine the approximate location of the caller (be that the VZW phone user or the other party), and may or may not be in our network. The destination is the same: approximate location of the called party.
I know that the position of the caller or called may not be exactly the same. This is because the location of origination or destination is based on cellular switch, rather than tower. That means the location can be many miles from the actual location of the caller. I hope that helps!
DionM_VZW
Follow us on Twitter www.twitter.com/vzwsupport

Similar Messages

  • Monthly statement

    The only monthly statement of usage that I can find is the most recent month. For previous months I have purchase history but not monthly statement. Where do I find old monthly statements? I read that these are held by skype for six months.

    Mark88888 wrote:
    Where do I find old monthly statements?
    Hello and welcome to the Skype Community.
    At your account page click on "Usage [last 30 days]". You can then scroll back by using the < button to see the previous 6 months usage by individual month and forward again to the current month by using the > button. The buttons are located at the top left and right of the page.
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

  • I would like to view my data usage per month going back at least 6 months. is it possible?

    I would like to view my data usage per month going back at least 6 months. is it possible?

    Data usage is only available for the past 90 days:
    On the left-hand side of the My Verizon page, click View Bill.
    Use the drop-down to select the appropriate bill.
    Click the Calls/Messages/Data tab.
    Use the drop-down to select the appropriate line (if applicable).
    Click the blue Data button.
    There's also a blue Download to Spreadsheet button below the data logs.

  • Missing records of all calls in detailed usage for 11 days straight, from 4 months ago!!

    I can see all detailed usage on both phones on my account, except there is absolutely no record of any calls, in or out on my phone from 10/29/12 - 11/10/12. It is very strange. My billing cycle ends on the 10th. I viewed and downloaded details from the billing period before and the billing period after, and can view and download spreadsheets of all of the calls for those periods. When I view or download the call details for the billing period 10/11/12 - 11/10/12 all the calls only go up to 10/28/12 no matter which way I view it, even on the bill copy. I never noticed before, but now I need the call records for legal reasons and that is why I noticed it now.
    Where did my call records go?

        Hello violets69
    I'm very sorry your missing call records. Lets get this addressed. Please send me a private message with your mobile number.
    JoeL_VZW
    Please follow us on twitter @vzwsupport

  • System usage per user

    Hi Security Experts,
    Our company have a SAP system version ECC 5.0 and right now we are making an analysis related to the quantity of users and the quality of the system usage per user, so the question here is if there's a way to know how much resources does an user consume? this is, time connected, transactions used. This is in order to separate the occasional users from the operating users?
    I'll appreciate a lot your help.
    Best Regards,
    Erik Espinosa

    Hi
    ST03N is your solution.
    There you find every minute detail for performance in the SAP system.
    You can check User Profiles for days , weeks and months individually to check the response times, data executions from the database etc.
    You can also find the processes/ transactions that take the highest memory consumption.
    Apart from this, an earlywatch report from the system would also assist you in such an analysis.
    I hope this helps
    Regards
    CHEN

  • Usage 'Call Time' Question

    I recently had to take my iPhone back to the Apple Store due to several problems I was experiencing. They replaced it without any problems and put my old sim card back into the new handset, but upon re-syncing it to my iTunes it re-activated not just the once, but three times. Every time I re-docked the iPhone it went though the re-activation process each time. I decided to do a restore. This solved the problem but I also lost the call time status in the usage menu. I didn't think this would completely reset the stats, I thought it was sim card specific. Can anyone assist?
    Also, one last question about the usage. When my carrier (02-UK) renews my minutes at the start of the new month, will the call time on the usage menu reset back to zero so I know how many minutes I have used in that month? Thanks.

    I believe that the rollover minutes that are lost due to expiration and new ones are contained in the new billing.
    If your bill cycle ended on the 16th of August, it should have shown in your account on-line unless it was not a full month, i.e., you bought the phone on 1 August, your billing cycle was determined to be the 16th of the month, not a full month.
    I had a similar question a few years back when Cingular had rollover and they bought AT&T mobile. Now that AT&T bought Cingular, I would think that the same rules apply but who knows.
    mikeab

  • List-processing: limitations to 255 chars per line?

    Hi,
    check the sample code below and if possible, execute it in some of your systems:
    start-of-code
    REPORT  ZISM_TEST52 LINE-SIZE 300.
    DATA:
      line(300) TYPE c.
    WRITE '0123456789' TO line+250(10).
    WRITE: / 'From variable', /.
    WRITE  line.
    WRITE: / 'Directly to the list', /.
    WRITE AT 251 '0123456789'.
    end-of-code
    As you can see from the execution, when writing something into the char variable (in this case line), and try to put it into your screen, there is a limitation - only the first 255 characters of the variable take place in the resulted list. But, if you write directly into the list, this limitation is missing.
    My question is closely related to this limitation:
    Is there a possibility to avoid this limitation while putting something into the variable, and after that writing it to the list?
    Situation is: I have quite complex report to rewrite (with several lists, and complex header texts for each list), which uses this technique - write to internal table, after that loop at the table and use simple write statement. I would like to save my effort and time and to use a a possibility to write variables longer than 255 chars to the list - if there is any.
    So? Is there such a possibility?
    Any help would be highly appreciated.
    Many thanks in advance.
    Regards,
    Ivaylo Mutafchiev

    HI Ivaylo
    Below is from documenation:
    Creates a report with col columns per line.
    If the LINE-SIZE specification is missing, the line length corresponds to the current screen width. The system field SY-LINSZ contains the current line size for generating lists. The maximum width of a list is 1023 characters. You should keep lists to the minimum possible size to improve useability and performance (recommendation: LINE-SIZE < 132). For very wide lists (LINE-SIZE > 255), you should consult the notes for using LINE-SIZE
    greater than 255.
    Notes
    The specified LINE-SIZE must not appear in quotation marks.
    If the you want the report list (i.e. the output) to be printable, do not define a LINE-SIZE with a value greater than 132 because most printers cannot handle wider lists. <b>You cannot print lists wider than 255 characters at all using the standard print functions.</b> To print the contents of the lists, you need to write a special print routine that arranges the data in shorter lines (for example, using the PRINT ON addition in the NEW-PAGE statement.
    At the beginning of a new list level, you can set a fixed line width for the level using the ... LINE SIZE addition to the NEW-PAGE statement.
    Maybe the highlighted portion might be one reason for this behaviour.
    Kind Regards
    Eswar

  • $15 PER LINE reconnection fee is crazy!!!!!!!!!!!!!!!!!!!!!

    I have been a Verizon customer FOR YEARS, both home/cable/internet and wireless service, for me and my family (5 wireless lines). Somehow I was switched over to paperless billing last month and forgot to pay the bill. When I never got a bill, I finally requested to get switched back. My payment was obvious late, but I have NEVER been late, so I thought not a big deal. Pay a small fee and keep on going. To my surprise they are going to charge me an additional $75 dollars to RECONNECT A WIRELESS ACCOUNT. Can someone please tell me A) what REAL costs are involved in reconnecting a wireless phone (WIRELESS-duh!!) other than having somebody in accounting check a box on their screen and B) what other phone carrier is a better alternative to Verizon?

    The only way you would have received $15 per line reconnect fees would be if your account was suspended due to non payment. It's our responsibilities as customer's to know when our bill is due, because what happens if USPS loses your bill or gives it to the wrong mail box (has happened to me before)? Verizon contacts you if you are late anyways. You receive alerts. If you didn't pay, there are consequences.  Just like if you go overdraft in your bank, you have to pay a fee, you bounce a check, there's a fee.
    From our contracts:
    About My Payments
    If you're a Postpay customer and we don't get your payment on time, we will charge you a late fee of up to 1.5 percent per month (18 percent per year) on the unpaid balance, or a flat $5 per month, whichever is greater, if allowed by law in the state of your billing address. (If you choose another company to bill you for our Service [such as another Verizon company], late fees are set by that company or by its tariffs and may be higher than our late fees.) Late fees are part of the rates and charges you agree to pay us. If you fail to pay on time and Verizon Wireless refers your account(s) to a third party for collection, a collection fee will be assessed and will be due at the time of the referral to the third party. The fee will be calculated at the maximum percentage permitted by applicable law, not to exceed 18 percent. We may require a deposit at the time of activation or afterward, or an increased deposit. We'll pay simple interest on any deposit at the rate the law requires. We may apply deposits or payments in any order to any amounts you owe us on any account. If your final credit balance is less than $1, we will refund it only if you ask. You may have to pay a $35 fee to re–activate Service if your Service is terminated , or a $15 fee to reconnect Service if it is interrupted for non–payment or suspended for any reason.

  • Viewing Call Usage on Line

    I am checking my kids phone usage on line, and noticed that several calls are showing up but no data about incoming or outgoing and no number.  Can they call using an anonymous feature and block Verizon from tracking who the other party is?  These are long phone calls.  How do I find out who they are talking to?

    No numbers cannot be blocked from VZW as they administrate the Line Access. Sometimes it takes 24-HRS to show whether the phone call was incoming and if the call is outgoing it will show the City or City, State, or the Location in which you kid placed the call to. As I said that data can take up to and maybe slightly over a day to show up. As for the fact that there is no number in "Usage Details" if I am understanding that is what you are saying, you should contact VZW because that would have to be a server-side error on their part, but I wouldn't understand why it would just affect their account. As I said they cannot block your ability to see numbers that they are calling and the numbers that are incoming.
    --kwm1337

  • Is there a way to see text messages per line and what it says on your online account?

    im trying to find out if there is a way to view text messsage per line on my verizon wireless account?

        djhenele,
    I can provide details! The number registered as the online account owner can view the dates, times and numbers of incoming/outgoing text messages in your My Verizon account here http://bit.ly/xB4iTc Select View usage and messages. You will not be able to view the content of the messages. Content can only be viewed on the device or via a subpoena. Thank you.
    TominqueBo_VZW
    Follow us on Twitter @VZWSupport 

  • I have a 6 month old top of the line iPad 4 I can't figure out. IN ANY WAY!

    Today I get in my emal something about refunds for people whose children have charges up apps to my account with iTunes. Well I can't even find WHERE on my iPAD I have the icon FOR iTUNES!  I see people show it as a blue symbol with notes and it says iTunes.  My iPad does NOT have that. YET when I try to go download it from the iTunes store it says that iTUNES came with my iPAD so where is it??
    There is a RED emblum with a double note but it says MUSIC!   Is that the same thing as the iTunes?  
    What is the task manager? And where you do find that?
    I get no answers on anything as to how to work this thing and it is extremely upsetting.  I paid $1,200 for this iPad and my husband paid the same amount and got a REALLY NICE DELL and I have this thing I can't even use! Then on top of it when you write something like this you get an email from the Apple/ Mac people saying they took your post off because it was not positive enough for them - so how do you find out anything?
    Aloha Antoinette 

    islandantoinette wrote:
    Today I get in my emal something about refunds for people whose children have charges up apps to my account with iTunes. Well I can't even find WHERE on my iPAD I have the icon FOR iTUNES!
    islandantoinette here is a copy of Apple's email (click the image below to enlarge it):
    The operative words are "Check your email for iTunes receipts or use a computer to sign in to your iTunes account ..."
    I trust that answers that question.
    What is the task manager?
    An iPad has no such thing. It has no Start button either. You can draw no comparison to a Windows PC because an iPad isn't a Windows PC; it's an entirely different category of product. It's like comparing a microwave oven to a barbecue grill - they both cook stuff, but that's where the comparisons end. If you want a Windows PC there are plenty of cheap things from which to choose for which you must tolerate ctrl-alt-del when you log in every time, among other indignities. PCs have had well over a quarter century of refinement, so you'll know what to expect.
    I have seen everyone from nonagenarians to two - year olds pick up an iPad and use it in seconds. Literally. I can't say the same about any PC. Both iOS devices as well as Macs also incorporate a robust range of accessibility options to accommodate people with limited sight, hearing, or other challenges both physical and mental. I understand your frustration with learning to use a radically new and different device, but it seems to me anyone in your circumstance given a PC for the first time would be facing a practically insurmountable challenge. Besides, wouldn't be worth the effort since the popularity of PCs is diminishing rapidly in the face of iOS devices the market clearly prefers.
    I'm still trying to understand how it was possible to spend $1200 on a top of the line iPad whose suggested retail price could not have exceeded $929. If you purchased AppleCare+ that would add $99. Sales taxes would have had to be 17% for your total purchase price to be $1200. Is that correct?
    The reason for asking is that if you purchased AppleCare, complimentary customer support regarding any subject is extended beyond the initial 90 days for the duration of the AppleCare agreement. You can call AppleCare and discuss any iPad-related subject with them at length, at no additional cost. You will find Apple's representatives incredibly patient and will work with you for as long as possible, weeks or months if necessary, to resolve any question you may have with your iPad. No other company on Earth can come close to the quality of support that Apple offers its customers.
    The point is that you have many, many support options from which to choose. All you have to do is avail yourself of them.
    Good luck.

  • Event List - Used to show 1 event per line that I could open and view photos. Where is that feature?

    I was editing photos (iPhoto) and events were shown as 1 Event per line, preceeded by the > triangle, that I could click and open the event to see the photos.
    I was collapsing all the events so I had a nice list by date, and was naming each event.
    Then I hit something, and the 1-line per event went away, and now instead of showing events as a list,
    it shows events as "icons" with the key photo etc.
    How do I get back to listing events as a LIST ??  Like in the Finder window, where you can see
    files as Icons, Lists, Columns, or CoverFlow.
    All I can see now is the "Icons" view, I want the "Lists" view.
    Anyone seen the "Lists" view ?? and how to get back to it?
    Thanks

    I found the answer here:  https://discussions.apple.com/message/17430153#17430153
    Select VIEW menu item, then click "EVENT TITLES"
    To Collapse all the List sub-item details, cursor on one triangle, then ALT-CLICK and they all close up producing a useful listing;.

  • Is there a way to have a continious flowing text box with a limit of 26 characters per line?

    I am trying to make an interactive pdf form or an indesign form for a classified section in a newspaper. We use a 26 character limit per line for pricing reasons. What I need is for a text box or field to flow continuously yet limit each line to 26 characters. Right now we have an interactive pdf form that has numerous lines that limit 26 characters per line but they do not flow so you would have to tab or cut a word short in order to go to the next line, the other problem with this is you can't copy and paste a full classified ad since it cuts it off at 26 characters. Any input on how I can achieve the the above question would be greatly appreciated.

    There is a way in Acrobat to have text flow from one form field to another form field while entering the text. You can set your character limit per form field, and have as many fields as needed. But you cannot copy text and paste into the form field and have text flow throughout.
    Here is a link that describes how to set the properties within Acrobat.

  • Text per line in a billing plan

    Hi,
    Apparently SAP doesn't support the input of a note (text) per line in a billing plan.
    I found a userexit called "USEREXIT_MOVE_FIELD_TO_FPLT" in the include "RV60FUS1" (program "SAPLV60F"). As i understand it right this userexit enables the creation of a new field in the table "FPLT" (billing plan : Dates).
    Hence my questions :
    Is it possible to create a new field for adding text comments in this table ?
    This new field will this be displayed automatically on the billing plan screen ?
    If not, is it possible without modifications to the standards to display this field in the  billing plan screen ?
    any help would be most welcome.
    with regards

    Bogo wrote:
    One of our family members has deceased. I need to remove a line in our family plan. The line that needs to be removed is the primary line. That needs to be reassigned to a different line.
    Sorry to hear about your loss. 
    You will need to call customer service for this.  Canceling a line can not be done online and they should be able to help reassigning the primary line. (Dial *611 from your mobile device or (800) 922-0204)
    Good luck

  • Bank statement detail report in cash management

    Iam able to see all ap payment numbers in " transactions available for reconciliation report" but some of them are missing in bank statement detail report.
    Do anyone have any idea on this? pls suggest.

    These reports have different roles:
    Bank Statement Detail Report
    This report shows statement and transaction information for a specific bank account statement, including bank statement header information, statement line detail, and reconciled transaction detail. This report lists any unreconciled transactions separately with their current status, and the statement totals for each type of transaction, including the amount entered, reconciled, unreconciled and over-reconciled. Under-reconciled amounts are displayed as a negative amount in the over-reconciled column. You also have the option to run the report for only unreconciled statement lines.
    Transactions Available for Reconciliation Report
    This report shows all transactions available for reconciliation for a specific bank account. It lists detailed transaction information for your Available Receipts, Available Payments, and Available Journal Entries for reconciliation. Detailed information includes the Customer, Supplier, Transaction Date, Payment Method, Transaction Number, Currency, and Amount. It also lists detailed information for your available statement lines.
    This report only lists void payments if the Show Void Payments option on the Systems Parameters window is checked.
    Octavio

Maybe you are looking for