MOPatch bpmig.sh Structural Changes in SAP Bundle Patches

Structural Changes in SAP Bundle Patches New!
As of June 2014, there is a change in the internal structure of the SAP Bundle Patches (SBPs) for Oracle. While this has many benefits, applying the new SBP for the first time requires special handling. For more information, see the hot news SAP Note 2011199.
When looking at note 2011199 I found due to the changed structure and to identify stand alone patches it is recommended to run the bpmig.sh script.
To avoid these problems or to detect them before actually installing this SBP, you must run the bundle patch migration script bpmig which is delivered with MOPatch 2.1.16 and later.
The script comes up with an error message:
Cannot determine SBP version from "SAP Bundle Patch 11.2.0.3.2 - 201205".
opatch / mopatch semselfs seems to function properly...
Any clues?

Hi,
Please check the following SAP Note 2032109 - Executing bpmig.sh shows "Cannot determine installed SBP"
Thanks.
http://service.sap.com/sap/support/notes/2032109

Similar Messages

Problem when apply SAP Bundle Patch for 10.2.0.5

Hi,
We are trying to apply SAP Bundle Patch (SBP) SAP_102052_201102_SOL64.zip and SAP_102052_201103_SOL64.zip using MOPatch utility. Both MOPatch and OPatch utility have been updated with the latest download from SAP. When applying patch for SAP_102052_201102, most patches went through except for one patch that requires OPatch to be version 10.2.0.5.0. The OPatch version downloaded from SAP is 10.2.0.4.9. Even the OPatch delievered together in the SAP_102052_201102_SOL64.zip file is 10.2.0.4.9.
Below are extract of the opatch log file for this patch:
INFO:ApplySession applying interim patch '10248542' to OH '/oracle/DEV/102_64'
INFO:Starting to apply patch to local system at Wed Mar 23 10:49:25 SGT 2011
SEVERE:OUI-67073:ApplySession failed: ApplySession failed to prepare the system.
Patch 10248542 requires OPatch version 10.2.0.5.0.
The OPatch version being used (10.2.0.4.9) doesn't meet the minimum version required by the patch(es). Please download latest OPatch from My Oracle Support.
INFO:System intact, OPatch will not attempt to restore the system
INFO:Finishing ApplySession at Wed Mar 23 10:49:25 SGT 2011
INFO:Total time spent waiting for user-input is 0 seconds. Finish at Wed Mar 23 10:49:25 SGT 2011
INFO:Stack Description: java.lang.RuntimeException: ApplySession failed to prepare the system.
Patch 10248542 requires OPatch version 10.2.0.5.0.
The OPatch version being used (10.2.0.4.9) doesn't meet the minimum version required by the patch(es). Please download latest OPatch from My Oracle Support.
Help appreciated.
Regards,
Lim

Hi,
I went to
http://service.sap.com/oracle-download
then
Oracle 10.2.0.5
then
OPatch
The file I can see there is generic for ALL operating systems and the name is:
OPatch_10205_Generic_v0.zip
it seems that the version is 10.2.0.5, not 10.2.0.4.9 as you mentioned.
I have downladed it and look at the README:
Patch summary:
README file for OPatch 10.2.0.5.0, the Oracle Interim Patching Tool.
I'm not installing it, but it seems that the version is not the same as yours.
Is this the one you have downloaded?
Have you installed it properly? => may be you are running an older one

SAP Bundle Patches and Automatic Oracle parameter check script (note117165)

After reading SAP note 1027012 on SAP Bundle Patches and SAP note 1171650 on the
automatic Oracle parameter check script I have a simple question:
Is it still necessary to manually check whether some patch is installed in order to determine
exactly which event and fixcontrol to set?
Or is the automatic Oracle parameter check script so sophisticated that it is fully
sufficient to implement its recommendations, and you don't neet to manually
check any more which SBP with which bugfixes has been installed?
It would be great if SAP could confirm that the automatic parameter check is sufficient,
but so far I haven't seen this statement explicitly. I believe this is mostly because it
is so difficult (impossible?) to determine via SQL which patches have been applied.
Regards,
Mark

>
> Is it still necessary to manually check whether some patch is installed in order to determine
> exactly which event and fixcontrol to set?
Yes and No.
until now, fixcontrol are dependent of CBO patches and those are "register" on the view v$system_fix_control. They can be "check" autmatically, so you get the "proper" recommendation for those.
the parameter event depends on different situations, like some patches. But those patches are "normal" patches and it is not possible to check if they are installed from inside the DB with a simple script. For those, the check script will tell you to do it manually and will tell you which patch has to be check
In addition, there are other parameters that have to be check "manually", like processes (where you get a "semiautomatic" check) or db_cache_size, where you should check if the size
> It would be great if SAP could confirm that the automatic parameter check is sufficient,
> but so far I haven't seen this statement explicitly. I believe this is mostly because it
> is so difficult (impossible?) to determine via SQL which patches have been applied.
The automatic parameter check is sufficient, meaning that you get all information, including the parameters that you have to check manually and some information for that check. Currently, it is not possible to automatize it 100%

SAP Bundle Patches VS Orclaes CPU Patches

Fellow admins
Sorry I am new to these Oracle CPU patches what is the difference between SAP Bundle and Oracle Patches besides Oracle CPU's are for Native ORacle systems and the Bundle patches have fixes related to SAP's interaction with Oracle? Is there any other things I should be concerned with?
Thanks
Mike

Hello Mike,
An SBP contains the following:
    o The current Patch Set Update (PSU).
    o SAP-specific single patches and merge patches that are required but not contained in the PSU.
    o Generic patches that are not contained in the PSU.
    o The current SAP-specific optimizer merge patch.
    o README.html: Installation description for the SBP.
    o bugs_fixed.html: List of patches included.
SBPs are cumulative; that is, the next SBP contains all patches of its predecessor plus the newly-added patches.
You can find further information on note [1137346|https://service.sap.com/sap/support/notes/1137346].
Regards,
Eduardo Rezende

Extract structure changes related to 2LIS_03_BF from sap R/3 4.6 c to ECC 6

Dear Experts,
Recently we have upgraded out BW sytem from BW 3.5 to BI 7.0.
Now planning for R/3 upgrade FROM 4.6c to ECC 6.0 is ongoing .
We have observed that there are some extract structure changes related to 2LIS_03_BF from sap R/3 4.6 c to ECC 6.
Please share some information...if u guys of any?
thanks a lot in advance...
Regards,
SRIKANTH

Im sorry but structures in SBIW - LO Cockit dont use any of this fields.....in LO Cockpit you can see the structure of the Datasource and theres no any of the fields of that structure ....check Cockpit and compare there, structure of SE11 are not the final structure that the extractor uses for Data Staging...
At least for me is what i use...i think that those structures additional are for special for EA retail only...in my case they dont aplly....
I hope this helps you
Regards

Roles for disabeling structure changes in excel

Hello togehter,
I have got a excel sheet which I can open by the "Analyzer-AddIn."
If the users have to change some data, there is an embedded save-button.
But if they use the normal excel save button, it could be that the excell will be destroyed.
And now my question,
is it possible to disable structure changes by clicking the normal save button in an excel sheet via (creating) SAP-Roles? Or is it only possible by chaning VB-Code?
Thanks in advance!
Greetings,
Peter

Hi Peter,
if you want to disable the standard "save" excel button you should use some custom VB code. Afterwards, you can include this VB code in your reports using the workbook functionality.
Regards,
Theodoros

Structure changes in the LBWE, where does the field pool come from MCVBUK

Example: Customising Cockpit, lbwe > 2lis_11_vascl > Maintain structure
In lbwe the field 'pool' for MCVBUK does not have all the fields that I can see if I look at Structure MCVBUK using se11 such as FKSTK, FKSAK.
What does this depend on ? Is it to do with the events ?
Yet OSS Notes say to choose the fields from lbwe:
structure changes in the LBWE SAP Note Number: 762951
Note 576886 - Change to user-defined fields not extracted

But enhancing extract structures, you don't get the delta capability on the sepcific field (if you need it) - and there is no simple solution to this.
I found these OSS notes:
Note 328255 - Not all fields provided in Customizing Cockpit
This behavior is wanted. As not all fields of the communication structures can be used in a practical way, some are hidden. Fields are hidden for the following reasons:
 o The field is not filled for this event.
 o The field is only used internally (for example the work center ID - instead, the respective work center name is available).
 o The field should not be used here for reasons of design. Principally, you should select key figures only from the most detailed communication structure (or from the one with the most detailed hierarchy) and only the characteristics from all communication structures.
Note 351214 - BW extraction SD: Restricted field selection
This note goes into more detail
By the way, thanks for the replies, but the question was 'why ?' and I the OSS notes replied to this.
The whole problem is to do with 'delta' enabling, and I've spent a day researching to find that there is no easy way to delta enable enhanced extract structure fields.

Error during transport-Structure change at field level (convert table /BIC)

Hi,
I am trying to transport from DEV to Test when I encountered this error.
The tables are both consistent when I checked with SE14.
Start of the after-import method RS_CUBE_AFTER_IMPORT for object type(s) CUBE (Activation Mode)
Error/warning in dict. activator, detailed log > Detail
Structure change at field level (convert table /BIC/DZCRUSDI026)
Table /BIC/DZCRUSDI026 could not be activated
Return code..............: 8
Following tables must be converted
DDIC Object TABL /BIC/DZCRUSDI026 has not been activated
Error when activating InfoCube ZCRUSDI02
Error/warning in dict. activator, detailed log > Detail
Structure change at field level (convert table /BIC/DZCRUSDI023)
Structure change at field level (convert table /BIC/FZCRUSDI02)
Table /BIC/DZCRUSDI023 could not be activated
Table /BIC/FZCRUSDI02 could not be activated
Return code..............: 8
Following tables must be converted
DDIC Object TABL /BIC/DZCRUSDI023 has not been activated
Error when resetting InfoCube ZCRUSDI02 to the active version
How do I resolve this
thanks

Hi,
There are no Inactive objects in the cube in DEV system. Also must of the changes I made in Test are already in the cube in TEST But the cube is not active.
SAP proposed that the cube be activated manually but is not a good procedure to activate in TEST system.
Error when resetting InfoCube ZCRUSDI02 to the active version
Message no. RSO410
Diagnosis
Errors arose when activating InfoCube ZCRUSDI02. An active version already existed before the activation.
System Response
InfoCube ZCRUSDI02 could not be reset to the old active version. Since the generated objects no longer correspond to the old active version, they were reset to inactive.
Procedure
The old active version of InfoCube ZCRUSDI02 can no longer be used. Remove the cause of the activation error and activate InfoCube ZCRUSDI02 anew.
thanks

How we can import an IDOC structure from one SAP system to another w/o ALE

Hi Gurus,
How we can import an IDOC structure from one SAP system to another? we're not able to use ALE tech, these two sap systems are isolated.
Any response will be awarded!
Thanks a lot.
Samson

hi,
1.One is by change pointer concept i.e by executing the RBDMIDOC.We can generate the idoc and automatically to the inbound System.
2.By executable program also like bd10 and bd11.
Regards,
SHIVA(reward if helpful).

Hierarchy structure changes

Hi All,
I have one requirement at clent site where hierarchy structure changes i.e. parent child relation switches or changes from one level to another level. For example WBS element hierarchy stucture for project 101014 is:
101014--root
101014-1>101014-1-01>101014-1-01-02-->101014-1-01-02-01
after above hierarchy load to bw there are chances that hierarchy nodes change their positions.
i.e.above hierarchy node 101014-1-01 can be removed from parent(101014-1) and assigned to 101014-2.
In Next load Hierarchy need to realign/restructure according to new hierarchy tree from ECC system. Right now we are BW 7.30. Thanks for you help and gurantee of points.
Regards,
Reddy

Hi Gaurav,
Thanks for quick response, we are running process chain on daily basis which will trigger full load from ECC to BW. I thought the same but when I look below error message I think we need to some how delete hierarchy data and reload with restructed or realigned data. Please find below error details and once again thanks for your help.
Node ID 00001564 has not been included as a sibling node or as a child node
Message no. RH207
Diagnosis
The node with the ID 00001564 and the node name 101014-1-02-03 is not used as a child node (field CHILDID) or a sibling node (field NEXTID) by any node in the hierarchy. The node is also not a root node because the ID of the parent node 00001565 (field PARENTID) is not equal to 0. The node is therefore not linked into the hierarchy. Therefore the node is not connected to the hierarchy.
Procedure
This message is displayed in addition to message RH 242. The node is the root node of a subtree that is not connected to the hierarchy. For further details, see the long text for message RH 242.
4 of a total of 13,846 nodes are not included in the hierarchy
Message no. RH242
Diagnosis
The root nodes are the starting point for moving through the hierarchy. The content of the fields NEXTID and CHILDID is used to move from the current node to its sibling and child nodes.
4 out of a total of 13,846 nodes cannot be reached by moving through the hierarchy in this way. These 4 nodes are not connected to the hierarchy.
System Response
The hierarchy is not consistent and therefore cannot be activated.
Procedure
The cause of the problem is usually incorrect links to sibling nodes (field NEXTID) or child nodes (field CHILDID). An incorrect value often means that an entire subtree (consisting of several nodes) is not included in the hierarchy.
To simplify the search for incorrect links, the system identifies the nodes (from all the not connected nodes) that are not used as sibling nodes or as child nodes. These nodes are usually root nodes of subtrees that are not connected to the hierarchy. You can find these nodes in the RH 207 messages that follow.
Try to localize the problem by using the RH207 messages for help. If the hierarchy is loaded from an SAP source system, you can check whether the extracted data is correct by executing transaction RSA3 in the source system. If necessary, check if the data is modified with a user exit. If the hierarchy is loaded from a file, check the contents of this file. The problem might also be due to an error in the transfer rules or in the transformation.
Thanks
Reddy

Where can I found table or structure changes across different releases ?

Hi !
Just one question:
I would like to found where can I see tables or structures changes across differents releases of SAP R/3?, i tried to found a doc about this... but i couldn't found it.
For example, which table have been modify form version 4.x to 4.z, i mean fields added or modified, etc...
Thanks in advance,
Albio.-

Hi Albio,
You can do this. You can check the activation log of any table which you have to find for change history.
Just go to se11 and type the table name click on display and then go to utilities -> then activation log, it will show you all the changes made to table
Regards
Sumit Bhutani
Ps reward pts if helpful

Changes to a bundle file

Hi All,
I want to make changes to
BundleFile=com.sapportals.wcm.rendering.collection.AbstractCollectionRenderer,
BundleKey = txt_HeaderLinkList.
Where can I find this bundle file? Please provide me a solution to make changes to this bundle file.
Regards,
Madhvika Joshi

Hi,
This bundle file is a part of com.sap.km.cm.ui.flex
You can download com.sap.km.cm.ui.flex.par through the System Administration -> Support -> Portal Runtime -> Browse deployment, unpack it, make the necessary changes in properties, pack it and deploy it to the server.
But pay attention that this is standart sap component and you changes can discard after the new stack installation.
Another way is to create new km project in NWDS with bundle files (which will have the same content as AbstractCollectionRenderer.properties but with necessary changes) only, deploy it and change the reference from com.sapportals.wcm.rendering.collection.AbstractCollectionRenderer to your bundle file name. Then after new stack installation you have to worry only about correction of this reference in km configuration.
Regards
Pavel

'Structure Changed' Error when running a query

Hi,
I created a query with 2 structures. One structure for the time periods and one with Key figures (Calc and Restricted).
The query ran fine and subsequently I put this into a workbook which had other queries and made a workbook type report.
I modified the structure with the key figures recently and when I run the query now a popup box appears saying "warning; structure changed" and lists down the query elements that I changed, and subsequently the query does not run (no data is displayed).
But if I open the same query in design mode and do nothing and run the query again (with the same input parameters), it runs ok.
Please advise on how I can sort this out.
Any help would be greatly appreciated.
Thanks,
Dominic

Hi,
If you want, you can remove the query with 'Remove Query' option in the BEx toolbar and then re-insert the query and then save the changes to the workbook. The next time, you refresh the workbook you won't get any such messages.
Thanks

To create the follow up transaction automatically on status change in sap crm?

To create the follow up transaction automatically on status change in sap crm? If yes, how to make the setting for this?

Hi vishal,
As per the requirement transaction type is activity(ACTI) & sales order(TA). when the take order objective is complete system automaticaly craete a new activity of tele sales call or metting with wholesaler.
this is requirement of client.
now i am already create all type of transaction types of activity & sales order & create follow up transaction also. i have doam already create action profile also but when i am assign this action profile to transaction & try to create an sales order no follow up transaction could be create automatically. i think the condition is not right so please help me out in this. what should be the start & schedulec condition for this scenerio

Reg: If changes done in SAP BO Analysis office, then Changes can be done in SAP BW in respective targets. But, is it possible to do the same changes in SAP ECC? How?

Hello Everyone,
If any changes are done in SAP BO Analysis office, then the change can be done in the SAP BW in the respective Targets.
But how can we do the changes in the SAP ECC ? Is it possible to do the changes in the tables ?
Any answer is appreciable
Regards,
Karteek

We are using the "Input ready Bex query", in order to modify the values in "BO Analysis office".
ECC BI BO Analysis office
1 -------------> 1 ----------> 1 ------
 |
 | (Now Data is changed in Analysis office from 1 to 2)
 |
(?) <-------------- 2 <---------- 2 <-----
(Will it be updated in ECC)
(Diagram Explanation)
From ECC we can load the data (Consider Value-1) to SAP BI and from SAP BI we can load the data to BO analysis office.
So, now if we change the data in BO Analysis office (Value-1 changed to Value-2)..
Now the data is changed in SAP BI to Value-2.
So what about the data in ECC ? Whether it is changed or not?
Please provide us a real time business Scenario..
Thanks,
Karteek

MOPatch bpmig.sh Structural Changes in SAP Bundle Patches

Similar Messages

Maybe you are looking for