More feed posting problems

I am also getting either error 5002 or just "The iTunes store could not process your request, please try later"
The feed has been validated OK
It is: brandspanking.co.uk/podcasts/parker/parkerpodcast.xml
I have tried on 3 PCs and 2 macs in 2 completely different locations.
I have tried renaming the feed and simplifying the feed address all to no avail. I must have tried more than 150 times since last Friday!
I see from this forum that I'm not the only one having problems. I've submitted feeds before with no problems, so does anyone know how I can get support for this as it's driving me nuts!
P4 3.2 Ghz 2.5Gb RAM etc. Windows XP Pro

I'm afraid I don't have much to offer to this discussion except that I'm having the same problem submitting a new podcast I recently created for one of my clients. Hopefully, when Apple notices enough threads about this in the forums, they'll let us know whether the problem is on their end or not.
I have set my client up with Reinvented Software's Feeder application to generate the feed and it validates and works fine when I subscribe to it manually.
I notice many of you are trying to submit new podcasts as well; I wonder if that has anything to do with this?

Similar Messages

Alternative to posting problem reports via OSS?

Sometimes I find problems with SAP software, like the RFC library, that I'd like to be able to report, however I'm not always in a position to do so, as I may not be working at a client site at the time (and it would not be appropriate to log the problem under their installation).
What is needed, IMO, is a way to log these problems without the formality surrounding OSS and SAPnet. I imagine this would be important too for those coming into SAP for the first time from the Java side.
Perhaps the easiest way would be to mark a forum posting as a problem report, similar to the way it can be marked as a question. This would then allow for highlighting to forum members from SAP who could decide whether the problem warranted escalation.
Cheers,
Scott

Hi Scott,
i agree. There should be a possibility to create a linkage between OSS notes and SDN postings in some cases, because (besides or in addition what you've already said):
1. Problems which are reported to OSS might already have been resolved in SDN and vice versa. A common knowledge repository would be very helpful for both parties, i guess. In my opinion it's easier (and cheaper) to verify a possible solution published already in SDN than finding/creating a new one for OSS.
2. IMHO it's probable that a steadily increasing number of "productive versions users" of arbitrary SAP software components will start to post problems and possible bugs at the SDN forums in the near future. It's absolutely ok to redirect them to the OSS, since this is the official place to report and handle such issues.
But it should be possible for example to add a link referring the "SDN problem thread" to the customer message(s). The support team could then post the SAP notes number as a reply to the thread as soon as a solution is available. Otherwise, if people aren't gentle enough to return to the forums and publish the problem solution, it's not easy to find the official answer, since nobody knows how to search for the corresponding note to get reliable search results. If the problem description of the note doesn't repeat parts of the question text in SDN, you are lost.
3. Resulting from 2., more and more "information leaks" will arise in the SDN forums. But i dare to argue that people will return asking the same question(s) over and over again, if there's enough interest, until "somebody" is lucky enough to find the solution in the OSS and post the notes number. Why not "automate" this?
Just to clarify:
I do not want to have the OSS team bypassed, this is definitely wrong from my point of view.
Cheers,
Stefan

More disk permissions problems after updating to 10.5.1

After updating to 10.5.1, my hard disk shows more disk permissions problems. But for 10.5.0, there is only one permission problem which cannot be repaired.
Repairing permissions for “Macintosh HD”
Warning: SUID file "usr/libexec/load_hdi" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner " has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig" has been modified and will not be repaired.
Warning: SUID file "usr/libexec/authopen" has been modified and will not be repaired.
Warning: SUID file "System/Library/CoreServices/Finder.app/Contents/Resources/OwnerGroupTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
Permissions repair complete

I'm also getting similar results:
Repairing permissions for “Macintosh HD”
Warning: SUID file "usr/libexec/load_hdi" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner " has been modified and will not be repaired.
Permissions differ on "private/var/log/secure.log", should be -rw------- , they are -rw-r----- .
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig" has been modified and will not be repaired.
Warning: SUID file "usr/libexec/authopen" has been modified and will not be repaired.
Warning: SUID file "System/Library/CoreServices/Finder.app/Contents/Resources/OwnerGroupTool" has been modified and will not be repaired.
User differs on "System/Library/Frameworks/JavaVM.framework/Versions/1.5.0/Home/lib/jvm.cfg", should be 0, user is 95.
User differs on "System/Library/Frameworks/JavaVM.framework/Versions/1.5.0/Libraries/classlist" , should be 0, user is 95.
Permissions repair complete
At least the progress bar is fixed
Mark

P45 Diamond Post Problem

Hi,
I'm starting to have another post problem with my P45 Diamond motherboard. (First one was RMA'd). This time, it's showing "Processor Initilization" with red, green, green, red. My current system is
Motherboard - MSI P45 Diamond
Bios - 1.3
Processor - Intel Q6600 (older version)
Memory - Kingston KVR1333D3N9K2/4G 4gb total 1333
Power Supply - Silverstone 750 watt
Graphics - ATI Radeon HD 3870 X2
It's been working fine for a few weeks and just started acting up. I'm using stock settings (no overclock) .
Recent changes are adding the Genie, however the post problem happened for the first time before I plugged in the Genie. The same result now occurs when the Genie is plugged in and when I remove it from the motherboard power.
Basically what happens is it will power up for the first time and it works. If I restart or shutdown and turn it back on the monitor stays blank and the status lights show Red, Green, Green, Red which is Processor Initilization. Only way to get it to boot up is hitting the Clear CMOS button or, when I went to bed and started it up this morning, it booted fine.
Any suggestions would be greatly appreciated.

Quote
The MCH voltage in Core Center we being reported at 1.976 however I NEVER changed any of the values. Is it possible that the bios "AUTO" changed the value?
The question is this value is really set to 1.976V or if it just a misreport. Please start Green Power Center and check the voltage values there.
{Remove Dual Core Center from the AUTOSTART list to make sure it does not open automatically when Windows is loaded. You can start Green Power Center independently of DCC. Just have look at the Dual Core Center Installation folder. There should be a sub-folder that contains the GPC Application. Create a shortcut to it from the Desktop and you are ready to go.}

Do white new iPad's have more light bleed problems?

I have exchanged 3 white 64GB wifi only new iPad's and will be exchanging for my 4th one today. are there more light bleed problems with white iPad's? I don't know how many times i will have to exchange until I get a good one. can someone show me of a white ipad that has no defects what so ever.

I just want to mention that if the DSL light isn't on, it is definitely the phone line, however it is not always the provider's fault. Remember they are responsible for the line from the pole to the house, but not the inside wiring. If your phone line is unplugged from the jack, the DSL light will not be on. To be sure that it is SBC's fault, go and test the connection at the d-marc box outside the house.
Take your laptop, your modem and a phone line and plug it in out there. If you don't get the DSL light, it is definitely their problem. If you do outside, but not in the house, and you call them out, you will get charged for the service call.
Also the built in ethernet cards, more commonly referred to as airport cards, are not really delicate per se, but the wire for the antennae connection is most definitely. Only if you removed yours which you would have to if you wanted to add RAM, would you have any reason to be concerned about possibly damaging it. SBC telephone tech support is always showing off their lack of knowledge.

K8N Neo 2 : IDE Long POST Problem NOT Solved !

CHECK LAST UPDATE At The bottom of the topic
I think I've won the battle...
I was having problems on Cold Boot with my IDE optical devices (CDRW (MASTER IDE 2)and DVD-ROM (MASTER IDE 1) looping their initialization procedure).
Here's what to do :
IN BIOS : Standard CMOS menu ->
Select your first IDE Peripheral (for example DVD-ROM) and in the IDE PRIMARY MASTER field, replace Auto with Manual. Same thing the other devices (for my CDRW : I selected it and in the IDE SECONDARY MASTER field, I set the Manual option).
Boot Winxp and go to the device manager, select the PATA controller and for Primary and Secondary chanel, uncheck "Let BIOS determine transfer mode" And select them yourself (for me it was UDMA 33 for my CDRW and UDMA 66 for my DVD-Rom)
And voilà !!! No more cold boot problems !
This proves that this is a BIOS problem that MSI should solve

Hi
OK, installed the update, and rebooted.
Went back into devices, and the yellow exclamation mark was still there.
So, I right clicked on it and chose the install driver option. I chose the default "let windows find it for you" option, and it found and installed the following in the USB devices section:
Standard Enhanced PCI to USB Host Controller
USB Root Hub
The yellow "Other devices" section was no longer there, and the Unknown device in the USB devices section was gone too.
Great everything looks good, except after about a minute, I got a popup "USB device not recognised" - One of the USB devices attached to this computer has malfunctioned, and Windows does not recognise it. There is a list of 8 devices, with the third one down in the list being "Unknown device".
The only thing I have that is USB in my system is my Microsoft optical mouse, but that works fine.
Also, I rebooted again, and now Windows freezes during loadup (after the loading screen with the blue meter thingie I just get a black screen). I rebooted again, same thing again.
So now I rebooted and chose the "Last known good configuration" and I am back where I started with the yellow exclamation marks in the device manager.
Am I missing something here, or does this sound like I have a faulty motherboard?
Thanks
Jooppy

Frequent error on feed posting - iTunes server problem?!

Since last friday iTunes server has a frequent problem accepting feeds for review. I had the same experiences as mentioned before. All the messages in this board point to one thing:
iTunes server - mainly error 5002
Can someone of Apples staff PLEASE solve this?
We do not know where we could come up with this, as there is no smart user help line at the apple site...

Please see this announcement:
New Podcast Submission Issues
"There is currently an issue with the podcast submission process; it is not possible to submit podcasts for review. When the problem has been fixed, this message will disappear and you should be able to submit podcasts via the usual process."

More posting problems...help appreciated

Hi all ,
first off, I've tried to search the forum for an answer but I can't seem to find one.
My Msi K8N Platinum won't post, but the D-bracket gives a various combination of lights before halting. I will post the sequence here, with aid of the D-bracket led tutorial; but here are my system specs:
MSI k8n neo platinum
AMD athlon 64 3200
512 Mb ddr (Corsair TwinX ULTRA PC3200)
Nec 8x dvdrw
Hercules Radeon 9800 Pro
Zalman 440W psu (---> +12 V = 15 A)
1.
http://server6.uploadit.org/files/talsms-A.jpg
2.
http://server6.uploadit.org/files/talsms-E.jpg
It stopped here too, but I resolved this by removing the keyboard
3.
http://server6.uploadit.org/files/talsms-M.jpg
4.
http://server6.uploadit.org/files/talsms-G.jpg
5.
http://server6.uploadit.org/files/talsms-B.jpg
At step 5, I hear a beep sound. Shouldn't this step be the first?
6.
http://server6.uploadit.org/files/talsms-J.jpg
7.
http://server6.uploadit.org/files/talsms-F.jpg
this step should put some writing on the display but I don't get any display at all.
My monitor just stays in power save mode
8.
This is the final step (for me although).
After this the system just...well, does nothing at all!
I tried to remove the Ram, I tried to change the Graphics card, but all with no success. I'm getting pretty desperate here
Any help would be welcome.
Thanks in advance,
Sp@ceCowBoy

Thx for your advice.
to answer your questions:
cooling = watercooling (properly adjusted)
thermal paste = Shin Etsu
tested it out of the case too :-(
no sata and both power cables are in the mobo.
The weird thing is that my graphics card (whatever I put in) is powered, but doesn't give display signal. Also when I press numlock or delete; the keyboard responds
Ah, anyway: thx for the help Kaspars_B
Greetz

Post Problems with H67MA-E35 (B3)

Hi maybe somebody can help me with this.
I have a H67MA-E35 (B3) and start to face problems with post, no beeps no monitor signal nothing... the only way is let the PC disconected for a couple of hours or even a day and the mobo start normally but when i try to reset or turn off,,,, the motherboard dont start again no beeps or monitor signal.
I tried to update drivers and bios version but nothing helps i still having the same problem.... any ideas? i am getting crazy please help!!

Quote from: xmad on 01-August-12, 01:42:01
>>Posting Guide<<
We are going to need more information on what components are in your system.
Also, clarify does the system crash while under load or just not start?
My system components are:
CPU i3 core 3.1 ghz
HD Seagate ST500DM002 500GB SATA
MEMORY KINGSTON KVR1066D3N7K2 2GB
PSU 500W
Bios updated to latest version via LiveUpdate
Running W7 32 bits
My system don't crash under load, just dint start after reset o turn off. To start again i have to unplug the AC cable and try to start after 2 hours or more.
Tell me if you need more information.
Thanks

915P Combo POST problems

Hi All,
First i would like to say great site and wonderful info provided. my problem has to do with starting up the computer. When turned on the computer doesn't POST and I have to press the reset few times to get to POST. here is how it goes: When turned on "CPU fan makes throaty sound 'too much for just starting up'". then the mouse + keyboard light check, either lights up indicating a POST in progress or they don't during all of that the monitor is still not POSTING.
Out of 10 start ups 9 require pressing the reset button 5-10 times to get it to post. could anyone please give some feedback on this problem. Also if it is not too much does anybody know why a computer with a SATA master HD and a Third primary ATA133 HD won't let me add any more drive and will ask for RAID to be installed? having problems connecting my CDRW ROM with 2 HDs and a DVD drive installed i have to manually open the case and unplug the DVD drive and swap it with the CD writer if i want to burn something on CD. Thanks again for the help.
MSI 915P Combo AMI BIOS v 1.6
Intel P4 530J 3.0GHz 1MB L2
2 x 512MB 'Generic' PC4200 DDR2 533MHz Unbuffered
420W Generic PSU
RADEON X700 Pro 256MB GDDR3
1x 80GB S-ATA Maxtor DiamondMax 8MB Buffer
1x 60GB ATA133 Maxtor
2x LG Flatron L1950 LCD
LG GDR8163 DVD-ROM
SoundBlaster Audigy2 ZS
WinXP Pro SP2
DirectX 9.0c
MS Wireless Key+Mouse
ATI Catalyst Suite5.5

Dude i'm telling you I'm having the exact same problem.......
after hours of troubleshooting and reading these forums and whatnot I've found out I am not the only one having this problem.....these MSI boards are pieces of i'd return it if I were you
this is the response I got from MSI's technical support via email
Dear Customer,
Since have tried a known good power supply then try with board outside of case with minimal components if same have board replaced with reseller if just received if had been working and issue occurred the can rma through us Thanks
Technical Support Division
MSI Computer Corp.
with such good english you can tell that MSI really puts alot of effort into customer support........The guy on the phone was foreign and hard to understand also and he said the same thing....Send it back!
I'm not getting a replacement either i'm getting an exchange because it is ridiculously evident through the 15-20 posts both here and on the online help section that this model of board is indeed a pile of and has many similar problems with no real answers. We got wtfpwnd, cut your losses and send it back

More Macbook Pro Problems

Hello again. I have another problem with my macbook pro, in addition to the previous one that nobody was able to help me with.
I have gotten to the point where I turn on my mac, go to my main user, and there would only be a blue screen without any icons or my background loading. I have reset in single user mode and tried a few things, and mainly all I can accomplish is getting the log in screen to come up so that I can get to another user. I just logged into another user, and it turns out that my computer is now reading 75 GB of free space. So, if I have done steps 5-8 on this site: http://docs.info.apple.com/article.html?artnum=106464, does that mean that not only is my harddrive entirely deletyed, but I cannot get the computer to still work?
I can't believe how unreliable this computer has been. I should not be dealing with this, and yet I am having more trouble with this Mac than any windows computer I have owned. I would like to mention that I have little 3rd party software, adn have no hacks.

Have you taken it in for repair? Perhaps that is what you need to do especially if it's still in warranty. I think this is your best course of action because it's apparent from your post that you don't really know what you are doing as far as "fixing" it is concerned.

POST problems with IIS Plugin

I am using the latest version of the IIS plugin for Weblogic (build: Apr 14 2002
17:53:13)
It seems that the ISAPI Filter (iisforward.dll) does not forward all http POSTs
- however it does seem to work fine for http GET's.
We have configured the plugin (you will see the attached debug dump) to forward
all calls on "/weblogic". If we perform http GET's on such a URL (using IE) everything
works fine - and the call is routed to Weblogic.
When we make a SOAP call using our C++ client, (a http POST) through the IIS plugin
we get a 405 error. If we artificially add the ".wlforward" extension on the context
URL (in our C++ client ) then it is forwarded correctly to weblogic by the Application
Extension (iisproxy.dll) - so the problem lies with the ISAPI filter. Also, if
we remove the ISAPI filter from IIS, we get the same 405 error - which confirms
that the ISAPI filter is not catching the POST's.
More puzzling, however, is that the SOAP requests from our Java SOAP client (using
WLS SOAP) works fine.
The problem must have something to do with the difference in structure of the
POSTS.
Normally, I would attach the logs/config in a zip file - but that seems broken
at the moment. Instead they are all pasted in below.....
-Nick
Successful POST http header:
POST /weblogic/webservice/BondInstrumentService HTTP/1.0
Host: localhost:8080
Connection: Keep-Alive
Content-Length: 1965
Content-Type: text/xml; charset=utf-8
SOAPAction: ""
Authorization: Basic c3lzdGVtOnBhc3N3b3Jk
UNSuccessful POST http header:
POST /weblogic/webservice/BondInstrumentService HTTP/1.0
SOAPAction: ""
Content-Type: text/xml
Connection: close
Content-Length: 1670
IIS 405 Response:
HTTP/1.1 405 Method not allowed
Server: Microsoft-IIS/5.0
Date: Thu, 25 Jul 2002 14:28:52 GMT
Allow: OPTIONS, TRACE, GET, HEAD
Content-Length: 3126
Content-Type: text/html
IIS Plugin Config:
Properties loaded from path: 'D:\Inetpub\WeblogicPlugin\iisproxy.ini'
Query String: '__WebLogicBridgeConfig'
General Server List:
Host: 'localhost' Port: 7001 Status: OK
ConnectRetrySecs: '2'
ConnectTimeoutSecs: '10'
CookieName: 'JSESSIONID'
Debug: '12'
DebugConfigInfo: 'ON'
DefaultFileName: ''
DynamicServerList: 'ON'
ErrorPage: ''
FileCaching: 'ON'
HungServerRecoverSecs: '300'
Idempotent: 'OFF'
KeepAliveEnabled: 'ON'
KeepAliveSecs: '30'
PathPrepend: ''
PathTrim: '/weblogic'
MaxSkips: '10'
MaxPostSize: '-1'
SecureProxy: 'OFF'
WLLogFile: 'D:\Inetpub\WeblogicPlugin\iisPlugin.log'
WLProxySSL: 'OFF'
Runtime statistics:
requests: 1
successful requests: 1
Exception objects created: 0
Exception Objects deleted: 0
URL Objects created: 1
URL Objects deleted: 1
connections recycled: 0
UNKNOWN_ERROR_CODE exceptions: 0
CONNECTION_REFUSED exceptions: 0
CONNECTION_TIMEOUT exceptions: 0
READ_ERROR exceptions: 0
WRITE_ERROR exceptions: 0
READ_TIMEOUT exceptions: 0
WRITE_TIMEOUT exceptions: 0
UNKNOWN_HOST exceptions: 0
NO_RESOURCES exceptions: 0
PROTOCOL_ERROR exceptions: 0
CONFIG_ERROR exceptions: 0
FAILOVER_REQUIRED exceptions: 0
Build date/time: Apr 14 2002 17:53:13

Doh. : wrote
in message news:[email protected]...
>
>
Thanks.
Sadly, my IIS configuration is correct. The plugin seems to work fine if Ijust
use my browser (http GET) for either forward-by-extension (*.jsp) orforward-by-path
(/weblogic/*).
However, there seems to be a problem when I use SOAP (http POST). For somereason,
when I use my C++ SOAP client (using WASP), then the ISAPI filter (the onethat
generates the .wlforward on the URL) doesnt modify the URL - hence the403...
If I use my java client.... everything is fine. Comparing the two httppackets,
I dont see anything obviously wrong - but something is making the WLSplugin choke.
>
Cheers,
Nick
"PHenry" <[RemoveBeforeSending][email protected]> wrote:
Howdy. I had a similar problem. I'm not a BEA support person, but maybe
I
might be able to help. If not, at least someone's listening. :>
Did you add the .jsp AND the .wlforward in the path redirection under
your
web app in IIS? I read the instructions thoroughly (or so I thought),
and I
wasn't able to get the POST to work. :< But as I reread the
instructions,
I
had put in the .jsp (is it under Home Directory, Configuration I think?),
and I put in the ISAPI dll, but I didn't put in the .wlforward (in with
the
..jsp). Once I did that, and restarted the box, all was good! :>
That might help. And if not, at least one of the BEA people have one
less
thing to try. Good luck.
"Nick Minutello" <[email protected]>
wrote
in message news:[email protected]...
I am using the latest version of the IIS plugin for Weblogic (build:Apr
14 2002
17:53:13)
It seems that the ISAPI Filter (iisforward.dll) does not forward allhttp
POSTs
- however it does seem to work fine for http GET's.
We have configured the plugin (you will see the attached debug dump)to
forward
all calls on "/weblogic". If we perform http GET's on such a URL (usingIE) everything
works fine - and the call is routed to Weblogic.
When we make a SOAP call using our C++ client, (a http POST) throughthe
IIS plugin
we get a 405 error. If we artificially add the ".wlforward" extensionon
the context
URL (in our C++ client ) then it is forwarded correctly to weblogicby the
Application
Extension (iisproxy.dll) - so the problem lies with the ISAPI filter.Also, if
we remove the ISAPI filter from IIS, we get the same 405 error -which
confirms
that the ISAPI filter is not catching the POST's.
More puzzling, however, is that the SOAP requests from our Java SOAPclient (using
WLS SOAP) works fine.
The problem must have something to do with the difference in structureof
the
POSTS.
Normally, I would attach the logs/config in a zip file - but that seemsbroken
at the moment. Instead they are all pasted in below.....
-Nick
Successful POST http header:
POST /weblogic/webservice/BondInstrumentService HTTP/1.0
Host: localhost:8080
Connection: Keep-Alive
Content-Length: 1965
Content-Type: text/xml; charset=utf-8
SOAPAction: ""
Authorization: Basic c3lzdGVtOnBhc3N3b3Jk
UNSuccessful POST http header:
POST /weblogic/webservice/BondInstrumentService HTTP/1.0
SOAPAction: ""
Content-Type: text/xml
Connection: close
Content-Length: 1670
IIS 405 Response:
HTTP/1.1 405 Method not allowed
Server: Microsoft-IIS/5.0
Date: Thu, 25 Jul 2002 14:28:52 GMT
Allow: OPTIONS, TRACE, GET, HEAD
Content-Length: 3126
Content-Type: text/html
IIS Plugin Config:
Properties loaded from path: 'D:\Inetpub\WeblogicPlugin\iisproxy.ini'
Query String: '__WebLogicBridgeConfig'
General Server List:
Host: 'localhost' Port: 7001 Status: OK
ConnectRetrySecs: '2'
ConnectTimeoutSecs: '10'
CookieName: 'JSESSIONID'
Debug: '12'
DebugConfigInfo: 'ON'
DefaultFileName: ''
DynamicServerList: 'ON'
ErrorPage: ''
FileCaching: 'ON'
HungServerRecoverSecs: '300'
Idempotent: 'OFF'
KeepAliveEnabled: 'ON'
KeepAliveSecs: '30'
PathPrepend: ''
PathTrim: '/weblogic'
MaxSkips: '10'
MaxPostSize: '-1'
SecureProxy: 'OFF'
WLLogFile: 'D:\Inetpub\WeblogicPlugin\iisPlugin.log'
WLProxySSL: 'OFF'
Runtime statistics:
requests: 1
successful requests: 1
Exception objects created: 0
Exception Objects deleted: 0
URL Objects created: 1
URL Objects deleted: 1
connections recycled: 0
UNKNOWN_ERROR_CODE exceptions: 0
CONNECTION_REFUSED exceptions: 0
CONNECTION_TIMEOUT exceptions: 0
READ_ERROR exceptions: 0
WRITE_ERROR exceptions: 0
READ_TIMEOUT exceptions: 0
WRITE_TIMEOUT exceptions: 0
UNKNOWN_HOST exceptions: 0
NO_RESOURCES exceptions: 0
PROTOCOL_ERROR exceptions: 0
CONFIG_ERROR exceptions: 0
FAILOVER_REQUIRED exceptions: 0
Build date/time: Apr 14 2002 17:53:13

Investment order settled more than posted on current month.

Dear All,
I have found a stange thing that I can't explain it.
Every month end, we will settle the investment orders to AuC accounts by KO8G. At the end of Jan, I settled all of them, but I found one investment order has settled more amount than posted on Jan.
By line item display, for example, I can see the account for Inv order has 4 postings, totally $67000.00. But after KO8G, there is $90000.00 settled to the AuC account.
No error message in test run and actual post in KO8G. Settlement rule is 100% to AuC.
I am really confused about the amount settled.
Please kindly throw some light on this. Thank you.
Emma

Hi,
The settlement was done monthly. There would be no un-settled amount. But that's a good tracker for the similar problem.
For my problem, I checked the Line Item one by one in KOB5. And I found 2 docs have the wrong expense account posted by the Inv order. So that's why the amount 23000 is calculated in settlement but not no shown in the right expense account by GL line item display.
I have done a posting to transfer the amount to right expense account.
Thank you.
Emma

Poor cell service on Staten Island (NY). Posted problem 9 months ago. No help from Verizon.

Dear Verizon Wireless -
I have been working on the campus of the College of Staten Island for approximately 1 year and the Verizon signal/reception here is horrendous to non-existant. Many of my co-workers - especially women concerned with safety - have switched to ATT or are considering doing so.
Here's some description of how bad the reception is:
When I need to be on a telelconference using my cell, I have walked all over campus staring at my bars to get some decent signal. Even then, there are times when moving even as little as a foot results in a dropped call. When I try to use my cell in our workspace, I will place it at the window (there are no tall buildings nearby) and use a headset, which works ok but not great. If I get a call, I grab the phone and run to 1 of 3 spots in our building where I seem to get a decent signal; one of those places is outside at a particular section of wall. As you can see, this is a very touchy situation where every little movement can result in a dropped call. I'd say about half of my calls are dropped.
Here's some of my attempts to resolve this problem:
1) reprogramming my phone by dialing *228 (anytime I do this, I go through both option 1 and 2.
2) removing my battery for a few minutes, reinstalling, and restarting
3) searching for updates to my phone (none exist)
4) scanning the web in general and your website in particular for discussions of this topic. I did find that several areas on Staten Island have very poor Verizon reception.
Looking at my settings menu, there seem to be some things I can change, but I have no idea what the options are so I've done nothing so I don't make the situation worse.
My phone:
Samsung SCH-U365
Thank you for any help. I really prefer not to switch carriers.

Look lets put it this way. You have spotty or no coverage on campus period.
However I am not Verizon Tech Support. call 1-800-922-0204 and speak to them to open up a trouble ticket.
You posting it here is getting you no where. I would have called if you are speaking the truth a year ago.
Not all carriers have coverage every where. It is not guaranteed nor should it be expected.
Years ago when our offices moved from a high rise building 20 stories high where the service was excellent, we got moved to a core building and service was terrible. This went on for years.
Finally today Verizon has high 4G LTE in this same area. It just took time. And of course we moved again and was away for years
That is just the way it is.
Complaining here or getting angry here is a waste of time.
Call up and report the issue get the incident number and have them get updates to you.
Or simply change carriers.
Choices and more choices....

FireFox cutting the words at the margin on RSS feed posts on google sites.

I inserted some RSS feeds on my google site and the posts do not appear completely, the words are cut on the right margin. The posts appear completely with the IE browser.

Can you post a link to a publicly accessible page (i.e. no authentication or signing on required)?
Is that text supposed to wrap or is something else wrong like a larger font?
Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
Use a compressed image type like PNG or JPG to save the screenshot.

More feed posting problems

Similar Messages

Maybe you are looking for