Mouse audio/actions not following settings

Hello all,
First off, I am using Captivate 4. As for my output type, I'm not sure of that at the moment - but I don't know if that's essential to this issue.
In the slides that I'm editing, I have captured my mouse navigating through a website. For the majority of the slides, the audio is doing the exact opposite of what the settings dictate. If I have selected to play the mouse click's sound, it doesn't play the sound. If I have NOT selected the mouse click sound to play, it plays. Only on one slide does it actually do what I ask. And I have also noticed that if I ask it to NOT show the mouse click, it shows it anyway, and the other way around.
I thought maybe by adjusting the settings to the opposite of what I want, I could trick the program - alas this doesn't work either.
What am I missing? Is there a master setting somewhere that's laughing at me?
Thank you kindly.

Well, nevermind... when I preview the entire project, things seem to work as planned. When I'm previewing individual slides, it's not the case but I suppose that's not a big deal.

Similar Messages

  • Audio Keyframes not following extract clip Premiere CS6

    Greetings,
    I am currently immersed in a wedding project that has taken me quite a while to complete. After watching the assembled master edit  sequence last night, I decided I would like to shorten(extract) a section of the walk in at the beginning. I have tried to use extract function  from the program monitor making sure all of the tracks were targeted and the only problem I am having is that the audio tracks have automation that is not following the extract. I have also tried doing a manual razor cut and removing the unwanted section, then have tried with both the track tool and the move tool. Each time the track volume automation does not follow the cuts. I wonder if I am missing something really obvious here. So to summarize: clips are moving but the tracks( there are several audio tracks with volume automation) are not moving in time to match.
    Thanks

    Hi Jim,
    Thanks for the quick response. You are correct as I have been researching this all morning.I really wish I had discovered this earlier as I have a 2 hour timeline with multiple audio adjustments to several tracks. Some were music replacement from a not so good audio feed, but there is a lot of hand drawn key-framing across a few tracks.
    I gotta say that I am surprised that there is not a feature that allows Premiere to have audio track edits to follow edits or a way to tie them to the clips or copy them to the clips. It looks like I either have to live with it or render out another master copy and cut out the unwanted footage.
    While I'm here and asking, any suggestions for rendering out a master file from 1080p avchd for archival and re-editing purposes. I am always afraid when I use match sequence settings that I am doing another level of compression..
    Your suggestions are very helpful here as always.
    Thanks

  • In PS CC, actions not recording settings made...

    Hello people,
    I could use your help in figuring out why in PS CC, when recording an action, it records adding adjustment layers but not the setting put in the adjustment layers. Help!

    There are problems playing actions that add adjustment layers. There is also a difference between how old versions Photoshop recorded Adding adjustments layers an newer versions of Photoshop record adding adjustment layers.  Old versions recorded a single step that identifies the adjustment type and included adjustment types setting used.  Newer versions of Photoshop record two steps the first make the adjustment layer type and the second step make the adjustment type layer adjustment.
    There is a potential problem playing actions that add adjustment layers since CS4.  In CS4 Adobe added the Adjustment palette panel in its Fly-out menu Adobe has two options that change Photoshop default behavior of how Adjustment layers are added.  Actions, Scripts and Plugin can not query these option or set them. Therefore adjustment layers may be added differently then how the automation is designed to work if these options are changed from their Adobe Default settings.
    However adjustment layers are not always added the way these options are set.   If there is an active selection active when and adjustment layer is added Photoshop will add a layer mask. It make no difference how the option is set. A layer mask will be included when there is an active selection.   Also If you record adding the adjustment layer using the menu layer>new adjustment layer>type  And in the New Adjustment Layer dialog you check clip to previous layer the layer will always be added clipped it makes no difference how the option is set. The adjustment layer will be added clipped when the box is checked the option is recorded into the action step.   So it is possible to record actions and write scripts the work a known was and can be changes after the adjustment layer is added.   However the does not help old recorded or even new actions that were or are being recorded in a more natural way.   It is best to just forget these options exist and lean them at the default setting.  That way Photoshop behaves as it historically work. .

  • Multicam - Audio DOES NOT follow video

    Hi Guys,
    I have read in some posts that some of you have this problem, but I have not been able to find a solution which anyone has posted.
    Problem:
    I am doing a multicam edit with 2 video and 2 audio. After nesting the sequence and turning on Multicamera, I goto the MultiCamera Window, then I select Audio Follows Video, and the result should be that, If I select Cam1, Audio1 should be playing, and if I select Cam 2, Audio 2 should play, but somehow, no matter which cam I select, only Audio 1 plays.
    Any help on this?
    Spec:
    Adobe Premiere Pro CS 4.0.0
    Win 7

    Yes I did read that part harm, but that would mean I have to have all audio in one track, which defeats the purpose of having multicam in the first place.
    Well anyway, I also read that CS3 has this problem, not sure if its fixed. Anyone having this problem also?

  • Premiere Elements 13 issue with the mouse on When I select a clip of video and move to a different place in my time line, Premiere Elements 13, will not release the clip rom the mouse.    The clip follows my mouse movements and goes to other places in my

    Premiere Elements 13 issue with the mouse on MAC OSX Yosemite 10.10.1
    When I select a clip of video and move to a different place in my time line, Premiere Elements 13, will not release the clip from the mouse.
    The clip follows my mouse movements and goes to other places in my time line.
    I try to delete these extra insertions, but the mouse will not release the clip.
    Action I’ve taken: I’ve re-installed Premiere Elements 13. Problem remains.
    This issue has consumed too much of my time and does not go away.  It ruins my video.
    Help please.
    Thanks

    I tried using the Guest Account on my Mac. In the Guest Account, Illustrator works perfect!
    Then I started wondering what processes (tools/tweaks) I run by default on my account. Turned out the problem was called by a little background tool called RightZoom. RightZoom let's the green 'zoom' button always maximize your current window.
    So thanks! Problem solved!

  • White marker not following when audio plays

    When I playback audio, the tracker (white line -not sure what it's called) does not go along with where the audio should be. This is usually the case, though I must say that every once in a while it does. It seems to help when I'm zoomed in closer.
    Ideally, editing would go like this for some of the elements that I edit.
    I hit the space bar, following along w/ the mouse, select heavy breaths and other things I want to delete, and select mute (which I have as a hot key). Then, I will delete silence (limiting silence to 150 ms - which I find to be a natural time space between words). So, this whole thing with the white line not following is kinda sucking.
    It will start to follow for about a second sometimes, then just disappear. I have a brand new machine and A3. It's relatively beefy. Duo core, 3gb ram, 500 gb hard drive. It's not mine, it's my work computer. I could not afford this machine. It just seems like I shouldn't be experiencing this lag, or whatever is happening. Any thoughts?

    Okay, I tried this. It seemed to work fine at first. Now I'm doing some more editing, and it's again not following the audio that I'm hearing.

  • System settings "Keyboard & mouse" Dialogue does not appear

    Hi,
    I'm using my MacBook Pro with latest version of Mac OS X Leopard (10.5.4).
    I bought recently a new Apple Bluetooth Keyboard and a Bluetooth Mighty Mouse. I connected them by using the Wizard in System Settings --> Bluetooth.
    Unfortunately the Mouse behavior is a bit too slow from my perspective, so I wanted to speed it up a bit.
    Therefore I tried to enter the "Keyboard & Mouse" Menu in "System Settings". Once I click on the Icon for "Keyboard & Mouse" the dialogue box turns to the grey background only without any settings on top of it.
    I could go back to "all settings" but the Keyboard & Mouse dialogue doesn't open. Reboots did not help ...

    Well,
    trackpad works fine. Unfortunately "Keyboard & Mouse" dialogues does not work either once I have no connected external mouse. My USB Logitech mouse as well, but I'd like to move from Trackpad and Logitech mouse to MightyMouse.

  • Integration sequence, the settings do not follow!

    Hello all
    I meet a concern since I went to the DC version of Premiere.
    Let me explain:
    I created a sequence that I have stabilized.
    When I joined this sequence into another sequence (main), my settings (stabilization, contrast ...) do not follow!
    Would you help me to make?
    Thank you !!!

    Read the entire article:
    iOS: How to update your iPhone, iPad, or iPod touch - Support - Apple

  • IPOD DOES NOT FOLLOW FINGER ACTIONS IN DIFFERENT GAMES LIKE JELLY SPLASH

    transparant cover removed no significant improvement.
    ipod does not follow exactly my finger movement.
    this does not happen permanently some times the ipod works ok, somte times not.

    Make sure the screen is clean
    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar                                              

  • Hi! i just bought the iPad mini 3 today with a case that supports the automatic sleep/wake lid action but i could not find the setting for the sleep/wake lid action in my settings.

    the cover i bought is from the brand called iPearl and it supports the auto sleep/wake lid action but i cant find the settings for it in my settings>general. now my iPad wont sleep when i close the lid. how do i find the option for this action in my settings on my ipad?

    The setting should only appear with the cover installed. Try settings> general> IPad cover lock/unlock> on. Thanks go to Diavonex and Chris CA from this earlier thread.
    The sleep/wake function would not show in general to turn it on. I have a Targus case but the function will not work. What's going on?

  • System Audio Is Not Working: Error AppleLegacyAudio/AppleTexas2Audio.cpp

    Hello,
    I noticed last night that my audio has stopped working, both input and output. After checking the system log, this is the message that is repeated numerous times:
    *Nov 19 13:04:03 sylvesters-powerbook-g4-17 kernel[0]: ^PSound assertion "0 != err" failed in "AppleLegacyAudio/AppleTexas2Audio/AppleTexas2Audio.cpp" at line 2703 goto Exit
    Is the reason the audio is not working simply a matter of a missing file or do I need to completely reinstall the OS? I have a back up that I can quickly copy files from.
    Thank you very much.

    Hello,
    Try deleting this file: com.apple.audio.DeviceSettings.plist
    /Users/YourName/Library/Preferences. Drag that .plist file from the Preferences folder to the trash, empty the trash and reboot. See if your audio works as it should. If not... might want to do an Archive and Install:
    Reinstalling Mac OS X
    Under some circumstances, you may need to reinstall Mac OS X. You can reinstall Mac OS X while keeping your files and user settings intact.
    Insert the Mac OS X Install Disc and double-click the Install Mac OS X icon.
    Follow the onscreen instructions. In the panel where you select the destination disk, select your current Mac OS X disk (in most cases, it will be the only one available).
    Click Options. *If you want to save your existing files, users, and network settings, select "Archive and Install," then select "Preserve Users and Network Settings.*" If you want to erase everything on your computer and reinstall Mac OS X, select "Erase and Install." You can't recover erased data.
    Click Continue.
    Click Customize to select which parts of Mac OS X you'd like to install, or click Install to perform a basic installation (recommended).
    If you purchased a standalone version of Mac OS X, these installation instructions are in a booklet included with Mac OS X.
    If you need to reinstall the version of Mac OS X that was on your computer when you purchased it, or if you need to restore all the software on your computer, including Apple, bundled third-party applications, and printer drivers, instructions are in the manual that came with your computer.
    For more information, visit the Mac OS X Install and Upgrade Support website at:
    Mac OS Tiger Install
    Carolyn

  • Wi-fi touch mouse x7000 will not stay paired on Windows 7 home premium 64-bit

    Product: HP wi-fi touch mouse x7000
    Computer: HP Envy sleekbook/ultrabook 6t 1000
    O/S: Windows 7 Home Premium 64-bit
    Wifi type: Intel 802.11b/g/n WLAN and Bluetooth + WIDI
    Error message: none when attempting to pair
    I received my HP Envy 6t two days ago and have started the process of loading software and devices.  In addition to ordering the PC from hp.com, I also ordered the HP Wi-fi touch mouse x7000.  After booting up the PC for the first time and walking through the Windows 7 set-up, I immediately installed the wi-fi mouse. 
    Upon initial install of the mouse with the provided install CD, I received an error message stating that one of the drivers was not digitally signed and that the version of windows installed did not support unsigned drivers and that the installed device may not work because the driver would not be used.  I continued forward with the install and the mouse seemed to be in working order.  I then decided to go out to the HP support website and download the latest Windows 7 64-bit driver for the mouse I had.  I then ran through the install and the mouse still continued to work.  At this point I had not yet rebooted the PC.
    I then performed the following steps in the listed order:
    - Installed HP Photosmart 4700 series printer with provided install CD and established a connection via wi-fi
    - Installed MS Office 2010 SP1
    - Started download of automatically identified Windows Updates that were related to the O/S and other installed Microsoft software
    - In parallel with the Windows updates download, I installed the latest release of Symantec's Anti-Virus software and updated its software and virus definitions, this all finished prior to the Windows Updates being completely downloaded.  I left the default settings as is for the Symantec Anti-Virus configuration.
    - The Windows Updates then installed
    - Rebooted the PC
    After the reboot of the PC was completed, the mouse would not pair at all.  I attempted several times where I would go into the HP mouse control and select configuration and then pairing.  I would follow the instructions of pressing the connect button and the screen would then say it paired, but the O/S would not recognize it and the mouse would not move.  Going back into the mouse control center it then also recognized it was not paired.
    I then attempted to uninstall the mouse software and it would get to the point where it was "gathering information" and it showed a full status bar yet it just hung there.  I would wait for 15 minutes and then hit cancel and it would still just hang there yet again.  After 15 additional minutes of canceling I would just reboot the PC for which the mouse software was still installed but the mouse continued not to pair.  I tried the uninstall process 3 times, each with a PC reboot as part of the process because it would just hang.
    I am not sure if the install CD installs a 32-bit version of the mouse software and drivers.  If so, perhaps I confused the registration of the product by installing the 64-bit driver I downloaded from HP support.  I have attempted to install both the 64-bit driver and the 32-bit driver for Windows 7 that I downloaded from HP Support online in which the execution of the installation is successful with no errors.  However the pairing continues not to work and the uninstall hangs.
    In addition, after the PC bounce, my HP printer was no longer being recognized.  Come to find out Symantec is blocking communication of the PC to the router and thus to the printer.  So I disbled Symantec and the printer now works but the mouse still does not.  I even rebooted the PC after disabling Symantec and attempted to pair, with Symantec still disabled after reboot, then attempted mouse driver re-installs, mouse software uninstalls and still no luck.
    So I am at the point where I cannot uninstall the mouse via conventional means and the wi-fi mouse will not pair manually or automatically.
    I have not yet circled back to performing another Winows Update check to see if there are any additional updates after the intial download of the ones mentioned earlier.  I will plan to do that next time I am on the PC.
    Any suggestions?

    moirl wrote:
    5.  I can not get anything off the Blackberry (photos etc.).
    As was stated above:
    1. Go to Options >> Media Card (or Memory)
    (some themes or BlackBerrys may call this "Settings >> Media Card")
    2. Check the following settings (if they are not listed this way, then change to reflect the following:
    a) Media Card Support: On
    b) Mass Storage Mode Support: On
    c) Auto Enable Mass Storage: Yes
    3. Save the settings and exit
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How to add custom actions to the Settings page for a Document Library?

    I want to add a custom action under General Settings on the Document Library Settings page (listedit.aspx). So I added a new SharePoint 2010 "Empty Element", and put this code in the Elements.xml file:
    <?xml version="1.0" encoding="utf-8"?>
    <Elements xmlns="http://schemas.microsoft.com/sharepoint/">
    <CustomAction
    Id="MyClassName"
    Sequence="999"
    GroupId="GeneralSettings"
    Location="Microsoft.SharePoint.ListEdit.DocumentLibrary"
    Title="My Link"
    Description="My description here"
    Rights="ManageWeb">
    <UrlAction
    Url="~sitecollection/_layouts/MyProject/MyPage.aspx"/>
    </CustomAction>
    </Elements>
    I found the GroupId and Location here: http://msdn.microsoft.com/en-us/library/bb802730.aspx but I am starting to wonder if this documentation is for MOSS2007 rather that SP2010
    as it says.
    What am I missing?
    Any help or hint would be greatly appreciated!

    Hi Henrik,
    Can we add above custom action in our custom group like General Settings?
    I have tried for that but it is not working.
    I have tried as follows
    <Elements xmlns="http://schemas.microsoft.com/sharepoint/">
    <CustomActionGroup
    Id="LibrarySettings.MyGroup"
    Title ="My Group"
    Sequence="1000"
    Location="Microsoft.SharePoint.ListEdit">
    </CustomActionGroup>
    <CustomAction Id="Custom.Configuration.ListCustomSettings"
    GroupId="LibrarySettings.MyGroup"
    Location="Microsoft.SharePoint.ListEdit"
    RequireSiteAdministrator="FALSE"
    Sequence="100"
    Title="Library Admins">
    <UrlAction Url="_layouts/15/LibrarySettings.aspx?List={ListId}" />
    </CustomAction>
    </Elements>
    But custom group is not created in list settings
    Any idea what I am missing here?

  • VO does not follow anchor link

    I find it strange that VocieOver in Mac OS X (10.5.8) does not follow anchor links. The W3C specification documents and Wikipedia use them a lot; however the VoiceOver box does not follow the link while Safri jumps to that part of the page.
    Is this a miss configuration at my part or has it been designed that way?
    Thanks

    Hi there
    Your description seems to imply you are narrating at the same time as you are recording. This isn't best practice. Your best results will be obtained by adding the audio as a separate activity after you have recorded the screen action.
    Often in a web recording we notice what is perceived as a  mismatch. Often you end up with blank slides. This is because Captivate is running on your local PC (and running very quickly). But when you click a link to a web page, what really happens is that you send a command from your PC across the internet to a Web Server. The Web Server has to process that command, look up the desired page, send the page across the internet to your PC and it finally displays. While it may seem that it happens swiftly, compared to Captivate running on the PC it takes eons.
    Cheers... Rick
    Click here for Adobe Certified Captivate and RoboHelp HTML Training
    Click here for the SorcerStone Blog
    Click here for RoboHelp and Captivate eBooks

  • Hypev "automatic start action" not retained after live motion

    Hi,
    We have a hyper-v cluster of 2 windows 2008 R2SP1 nodes.
    We found that the settings we made in the VMs "automatic start action" were reset to "none" after migration between the nodes .
    We need to have it maintaned
    thanks
    Stefano

    Hi ,
    I think there may be something unclear in my previous email. Ok, I will detail it.
    If you make a virtual machine high available, the Automatic Start Action will not work after you perform a live migration. Which means the following setting will not be "failovered" to another host.
    You should set this via the Cluster Manager by the following setting:
    This is what I said:
    If you change the configuration of a virtual machine, we recommend that you use the Failover Cluster Manager snap-in to access the virtual machine settings. When you do this, the cluster is updated automatically with the configuration changes. However, if
    you make changes to the virtual machine settings from the Hyper-V Manager snap-in, you must update the cluster manually after you make the changes. If the configuration is not refreshed after networking or storage changes are made, a subsequent failover may
    not succeed or may succeed but result in the virtual machine being configured incorrectly.
    Thanks. Feel free to let me know if anything is unclear.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
    Hi Aaron ,
    yes I think there's a misunderstanding about the question .
    When you say
    "If you make a virtual machine high available, the Automatic Start Action will not work after you perform a live migration. Which means the following setting will not be "failovered" to another host."
    you mean that it is supposed to work this way ?
    I mean , If you make a VM HA with clustering is it an accepted behaviour that the setting of " automatic start action " ( not the stop action you posted the picture of ) is not maintaned after a live migration even if such setting is made through the failover
    cluster manager ?
    If you are telling me that this is what it is supposed to work I don't agree , because I wish I can have a way to set a priority in VM startup in the case of complete shutdown/reboot .
    Working with vsphere as well this is possible and I thought it was the same with Hyper-v
    To solve this problem I had to create a group policy's startup script for the cluster nodes in which I start the VM in the correct order with some timeout .
    Thanks
    Stefano Colombo

Maybe you are looking for