Move Logical component to another system group

I want to move an logical component which I have made under SAP ECC -> SAP ECC Server to SAP ERP ->SAP ECC Server under SMSY / Logical component. (because of the product version to install EHP4)
How do you do that?

you want to create the logical component, with a different product version. right?.
Please try to change the Product version. Or you have to create a new logical component with the correct product definition and include it to the solution. for this you have to have your system defined under ERP systems.
Thanks,
Jagan

Similar Messages

Move Classification data to another system

Hi all,
Are there any standard programs to download/upload class data from one system to another.
I know we can ALE the data and use LSMW, but they are not an option here.
Standard TCodes, programs, function modules, BAPIs only please..
PeteA

Pete,
BAPIs working on classification you'll find in function group CLBPA.
Additional information you will find in SAP note 1083986 (along with information on BAPIs for characteristics and classes). This note mentions several further notes with deeper information.
Regards,
Rolf

Documentation Assistant - No Logical Component exists for this analysis

Hi
Whe trying to create a analysis with in solution manager documentation assistant i get the error messaage
No logical component exists for this analysis , verify the analysis project.
Can anyone tell me how i can solve this,
Thanks
Barry

Hi Barry,
To solve this issue, you may try steps described below:
1. Call Transaction 'SOLMAN_DIRECTORY'
2. Select your source Solution via single click.
3. In detail panel, check if there is any valid Logical component in the
'System Group' Tab.
4. Add related Logical Component to the Solution, make sure there is val
id System for at least one role ( Development System e.g. )
5. Save your Solution.
6. Try to create Analysis Project from that Solution again and afterward
screate an Analysis.
Hope such information can help you solve such issue.
Kind regards,
Fabricius

Understanding and using Logical Components for Managed System configuration

Experts.....
I am embarking on a fresh installation of SolMan 7 EhP1 SPS25 and after a few bugs along the way, I am finally nearing the end of including the first Managed System. Somewhat related to {forum:id=10293771] I am hoping I can get some advice, but specifically with regards to Logical Components.
General question - I have a slide from SAP that shows a picture from Product->System->Instance->Logical System (client)->Logical Component. I am confused because it shows that Client 100 of a given ABAP system could be assigned to Logical Component A, whereas Client 200 of the same system could be assigned to Logical Component B. This seems wrong to me?
I am at the last step of the managed systems configuration wizard : "create logical components" and only want to ensure that I set things up to hopefully ensure that later usages (Maintenance Optimizer, etc) will handle things correctly!!!
- Our SAP landscape is not very complex
1. only ERP and EP (Dev/Test/Prod).
2. We are utilizing HR Self Service (XSS).
3. The ERP ABAP systems are on Netweaver 7.01.
4. EhP4 has been installed, however we only activated the HCM business functions. Therefore SAP_HR is on 604 whereas SAP_APPL is on 600. I think this might be driving some of the confusion in SMSY
For the DEV ABAP system I am trying to configure:
1. The system is showing up in two products : "SAP ERP" and "SAP ERP Enhancement Package" with the header data for both showing "EHP4 FOR SAP ERP 6.0 / NW7.01" and "SAP ERP 6.0"
2. Under "SAP ERP" the "product instance selection" shows only "SAP NW - Adobe Docu. Service" and "SAP ECC Server" as relevant
3. Under ""SAP ERP Enhancement Package" the "product instance selection" shows only "Human Capital Mgmt" as relevant by default. I manually flagged the development portal system as "relevant" for "SAP XSS (Self Services)"
4. The RCA DBA Cockpit system is complaining "No data available for extractor activation. Please check product mapping and Software Components in SMSY"
5. In the Managed System wizard, there is no logical component for any of the "EHP4 FOR SAP ERP 6.0 / NW7.01" selections
From what I can tell, I think this is correct:
1. Create a Z_EHP4 logical component and assign the DEV/QAS/PRD systems to them
2. Also assign the DEV/QAS/PRD to the existing SAP logical component "SAP ERP ECC SERVER"???
3. For the Solutions, my plan is to create
a. Non-Production ERP : with the dev/test erp/ep systems, but test system as the leading system
b. Production ERP with the prod erp/ep systems only
Thanks for any advice/guidance to help me avoid future problems!!
Edited by: Eric Poellinger on Jun 15, 2011 6:32 PM

General question - I have a slide from SAP that shows a picture from Product->System->Instance->Logical System (client)->Logical Component. I am confused because it shows that Client 100 of a given ABAP system could be assigned to Logical Component A, whereas Client 200 of the same system could be assigned to Logical Component B. This seems wrong to me?
Client 100 could be assigned to any number of logical components, client 200 could be assigned to those same ones or none of them. A logical component is just a grouping of systems used to accomplish some task in SolMan.
For example with ChaRM you could have 2 logical components.
ZCHARM_DEV development (100) -> QA (200) -> prod (300)
ZCHARM_SEC security (900) -> QA (200) -> prod(300)
One is used to show the path for moving development changes to prod, the other for security changes. 200 belongs to both, but 100 only to one.
Set them up in whatever way meets you needs. It looks like for you, you could just use the default one and assign your clients to the various system roles. Not all functionality in SolMan uses the logical components though.

Change of Company code from one Cons Group to another Cons Group.

Dear All,
Please advise on change of company code from one Cons Group to another Cons Group , we have Cons Structure - at present few companies are in one cons group and as a policy we have to move the companies to another cons group. So please advise me what will be the case if we move int he following senarios:
1. if till period 012 year 2008, company A is in Cons Group AA and we want the same to Cons Group BB. How it will move to Cons Group BB in a Company code with the opening balances?
2. if there is no data in SEM BCS total Cube - and we want to move the Company A from Cons Group AA to Cons Group BB.
What will be the effect in both the scenarios. How to do this? if you can specify some steps then I will try to analyze the situation.
Thanks in advance

The changes are not complicated but company A must be placed in cons group BB as of period 12 2008 and in the master data of the cons group it should be indicated that the first consolidation is at the end of the period (EOP). Likewise in cons group AA must continue to include company A but in the cons group master data it must be indicated that the period of divestiture is 12 2008 EOP.
The cons group changes tasks must be executed to move the balances in period 12 2008.
If there is not data for company A in the totals infocube you may simply drag-and-drop company A from cons group AA to cons group BB without any concerns.
The affect in each scenario is different because if there is data that is to be reported as part of cons group AA company A must be included in cons group AA.

TS4498 Can i move my installation of Logic 10 to another hard drive, as its nearly full and i want to free up space so i can install the additional audio files too.

Hi All,
       ....i've recently bought and downloaded Logic Pro X.........the software is great.......i love it. But when i bought it from apple, it gave me no choice where to install it. It just went ahead and installed it in the drive which has my operating system in it. Which, in itself is not a problem........but, in my case, the hard drive in question is almost full...........so when i decided to add the additional audio files which come with Logic...........a message was displayed that not enough free space is available for additional audio files.......please remove files to free up space!
        I would love to free up space, but i only have a small 64gb SSD (which is where my operating system is installed). Normally, by moving files around (to another hard drive for example) would be the answer to this problem, but.........and here's the problem..........Logic, and my operating system cannot be moved to another hard drive, once installed it seems logic is there for good.
        Come on Apple!!!!!!!!!!.................i have a terrabyte of space on my other hard drive!! ready and waiting for some music files and or Logic!!!! .........why on earth could you not of given me the option of an installation disk choice!!!!!
      .......well, it seems i'm stuffed now, and £130 lighter in the pocket. I could be the next Mody or Fat Boy Slim............but alas............it's not even looking like i'm gonna even be a one hit wonder.
     ........if anyone knows how to move logic to another destination drive, please help and when i'm famous, i'll sing at your wedding :-)

The vast majority of applications must be install on the system drive in order to run correctly.
Generally the applications take up very little disk space. It is usually the files they produce that need the space. Seeing as how I don't use Logic I can't do this but you might want to check how to move the files generated by Logic to another drive.
Allan

Move a query to from one user group to another user group

Hi,
it's possible to move a query (SQ01) from one user group to another user group ??
Thank you.

Hi,
You can copy queries only if you have the authorization to make changes. Within your current user group, you can copy all queries. However, queries of other user groups can only be copied if the InfoSet used to define the query is assigned to both user groups.
To copy a query, proceed as follows:
1. Choose the name of the query you want to copy on the initial screen.
If you do not know the name, use the directory functions to display the query directories and then choose a query to copy from there.
2. Choose Copy.
3. Enter the name and the user group of the query that you want to copy in the dialog box. Furthermore, you must enter a name for the copied query. The system proposes values for this.
4. Choose Continue.
This takes you to the initial screen. The query is added and appears in the query directory. You can now continue.
Regards,
Amit

Managing more than one logical component in SMSY Current System Assignments

Hi,
I have a problem with managing logical components in TA SMSY in my Solution Manager System, in the section "System Groups and logical Components". I want to maintain more than one logical System e. g. from Type Application Server ABAP --> SAP NETWEAVER APPLICATION SERV.
That means e. g. i want to maintain 2 or more Demo Systems from different Servers or Instances of the same Product Version in the same logical Component .
What I want to know is, is there a way to display these logical components in tne "Current System Assignments" - View in that form
Logical Component is e.g. : SAP NETWEAVER APPLICATION SERV
product/main instance is   : SAP NETWEAVER [Application Server ABAP]
Product Version | Development System | Demo System | Training System | Production System | ...
|--|||--
|
SAP NW 7.0        |                                         | ZB1: 100           |                               |                                     |
|--|||--
|
SAP NW 7.0        |                                         | ZB2: 800           |                               |                                     | ...
Thanks beforehand for your help.
Greets C. Peifer
Edited by: Carsten Peifer on Dec 15, 2008 4:03 PM

Thanks for your quick answer,
but i have to say, that this is not exactly what i've been lookin for.
What I need in my System Landscape is to have each demosystem as a logical Component from the same type (e.g. SAP NETWEAVER APPLICATION SERVER ABAP).
So that in Change Management in a Maintenance Optimizer Transaction i can choose between each demo system in my System Landscape (from the type SAP Netweaver Application Server ABAP) that i will maintain in Maintenance Optimizer, e.g. download a new SP Stack.
My Intention is to create new logical components from type SAP NETWEAVER APPLICATION SERVER ABAP in my Namespace e.g. ZSAPNW01, ZSAPNW02, ... and to maintain the types of systems (Demo, Development, Training etc ...) for each logical component.
Is this the only Possibility?
Or do i can also display my logical components the way i descriped beyond?
>
Product Version | Development System | Demo System | Training System | Production System | ...
|--|||--
|
SAP NW 7.0 | | ZB1: 100 | | |
|--|||--
|
SAP NW 7.0 | | ZB2: 800 | | | ...

Can't assign system to logical component

Hello everybody,
I try to configure my Maintenance Optimizer. I have created a system with main instance SAP ECC Server. In view Landscape components i can see my system in node systems->sap erp. When i try to assign a Logical component SAP ECC an a massage "Logical component SAP ECC cannot be assigned to this main instance" is displayed and component is not assigned.
What have I wrong made? What should I check/configure?
Regards
Bogdan

If you go to help.sap.com and SOlution Manager and look for the assign logical components menu item you will find instructions on this. Basically from SMSY click on the system then on top left menu tree select "Other Objects"
when the popup comes up enter the system id in the "System field"
Then at the bottom of that popup you should see an icon like to pieces of paper called"Intalled product versions" click on that and you get another popup to show products installed on the box. If it is not listed in the bottom , you can use the top section to select the product using free product selection , then you should see this error disappear as you have identified the main instance it is talking about and furthermore you should be able to then assign it to a logical component

AD System Group Discovery not updating System OU Name on computer object when computer moves OU

2 related questions.
1. We have noticed that computer objects (active clients) in ConfigMgr are not getting their System OU Name discovery data updated when a computer account is moved from one OU to another, and AD System Group Discovery runs. Since we are basing some of our Software Updates collections on AD OU name, these systems are not falling into their required collections.
2. On a few occasions we are also seeing duplicate computer objects being created. One new record from AD System Discovery, which contains the correct 'new' System OU Name, and one 'old' computer object from before the computer account was moved to a different OU in AD. The heartbeat discovery of this second object is still updating e.g. showing new heartbeats, but the computer object still shows the old System OU Name from before the computer account was moved in AD. If we delete both objects and run a Discovery Data Collection Cycle from the client, and AD System Group Discovery, then we get one new record with the correct 'new' set of System OU names.
This duplicates issue is happening in both our Central Primary Site and our other child Primary site. Both sites are set to create new client records for duplicate hardware IDs, and there is a possibility we're seeing the duplicate records on machines that have been re-imaged and redeployed at some point.
It's my understanding that it is AD System Group Discovery that updates the System OU Name property on client objects. We have this set to run every 4 hours. I'm not seeing any errors in the adsysgrp.log. Any idea why discovery is not updating the System OU Name information when a computer account moves OU? As far as I understand it, nothing additional is required to happen from the client end for this property to get updated.

The only thing I can think of would be ad sys group discovery not running at the site where the client is assigned to?
"Everyone is an expert at something" Kim Oppalfens Configmgr expert for lack of any other expertise. http://www.scug.be/blogs/sccm
HI Everyone..
ANy reply or correct answer to this question???
Same problem even i have. Duplicate machine names created when machine moved to different sites.
And also, AD sys group discovery running on all the sites (i have 4 sites).
System Security analyst at CapG

XI 3.0 and BW 3.5 system type/logical component in Solution Manager

We are in the process of performing an upgrade for ERP 2004, XI 3.0 and BW 3.5. Initially this is being done in the sandpits. All systems are configured and connected our Solution Manager to download the packages.
We are unable to determine what type of system the XI 3.0 and BW 3.5 should be configured under. For example, previously we had an issue where ERP was configured as ECC 5.0 rather than ERP 2004. This was causing an issue in MOPZ where the upgrade option wasn't visible in a maintenance transaction. The same issue is now happening for XI and BW.
Please advise on the system type (logical component to use) for XI 3.0 and BW 3.5 in Solution Manager as SAP have made it very confusing. Currently both are under type Netweaver 04.
Regards,
-Rohan

Hi
I believe that SAP hasn't upgrade option for BW 3.5, Check link:
https://service.sap.com/solman-mopz
Upgrade
a "straight" upgrade for SAP Business Suite (upgrade from SAP ERP 2004 to SAP ERP 6.0, for example) is not supported by Maintenance Optimizer
Upgrade with an Installation of an Enhancement Package is supported for SAP ERP, SAP SCM, SAP SRM and SAP CRM
Regards
William Neira

How to move Tablespace from One disk group to another disk group in RAC

Hi All,
I have 11gR2 RAC env on Linux.
As ofnow I have problem with disk group. I have 3 disk group which is almost full - 98%. I have added one NEW disk group and want to move some of the Tablespace(TBS) from OLD disk group to NEW diskgroup and make some free space in OLD disk group.
Can any one suggest me how to move TBS from one disk group to another disk grup without shutting down the instance.
DB is in Noarchive mode.
Thanks...

user12039625 wrote:
Hi Helios,
Thanks for doc id but I am looking for noarchive mode solution. becaues I got ORA-
"ORA-01145: offline immediate disallowed unless media recovery enabled " when run alter database datafile '...' offline.
Hence I am trying something and findout below steps but not sure how useful it is:
1- put tablespace offine
2- Copy the file to new diskgroup using Either RMAN or DBMS_FILE_TRANSFER.
3- Rename the file to point to new location.
4- Recover the file.
5- Bring the file online.
I had move 240M TBS from OLE to NEW.
These steps run successfully so I think this is valid for noarchive mode.Hence want to confirm..so inform me please.
Thanks :)I have doubt in my mind:
1. You database is in noarchivelog mode
2. You're taking tablespace offline
3. Suppose you're moving a file of size 10GB(or any larger filesize) to another disk group
4. Now after moving the file, you're trying to bring the tablespace online............NOW
tablespace will need recovery. if the required data is inside the SGA then it is ok. But if the data has been flushed, then?
if step 2 and 3 has taken significant time, then most probably you'll not be able to bring that tablespace online.
Regards,
S.K.

No logical system group can be determined for administrative unit &1

Dear GTS gurus,
In Risk Management module when we execute the report "Analyze LTVD Request Relevance of Products" (/SAPSLL/PRE_VD_OPT_ANL_PROD) we sometimes get the error message:
No logical system group can be determined for administrative unit *******
Now I did some googling and found the following website: consolut - /SAPSLL/PRE_VDEC139 - No logical system group can be determined for administrative unit &amp;1 - /SAPSLL/…
It says that in customizing item "Define Administrative Unit Attributes" some assignment is missing but I was not able to figure out what exactly. I compared it with Administrative Units which did not not issue any error messages and customizing looks good to me.
Can you share your insights on this topic?
Best Regards
Greg

Hello Gregor,
Under the Admin Unit attributes, you must have a Plant Group defined.
Is that Plant Group assigned to a logical system ?
(IMG: General Settings -> Organizational Structure -> Define Cross-Plant evaluation (or Define Plant-based BOM evaluation)
By the way, the site you have found is one of the many sites out there that lists the messages available in a SAP system. The same information is available within GTS (Transaction SE91).
Regards.
Mouaz BEN REDJEB

Logical Component for HANA DB system

Hi Friends,
I am doing Managed System Configuration for HANA DB system.
I have created Logical Component for the same, but I am unable to put it in Solution(in SMSY).
Can some one suggest.
Thanks & Regards,
Solman Starter

Hi,
What is the error you are getting ?
What your solution manger version and SP level ?
Check below note and see if they help.
1958910 - EarlyWatch Alert For HANA Database
Regards

I want to move SQ01 to another system

Hi experts,
I have a quest to move SQ01 to another system. Since it is a standard transaction,it has a lot of screens , includes and so on.
1 Should I change all the standard includs name to customer namespace?
2 Is there any brief step by step document describe how module pool works? Does it trigger by tcode commonly?
3 Can anyone give some suggestion to do that or maybe the procedure? Are there anything which I need to remember?
THANKS all!

Process wise
When ur customer wants some more feilds that shd be added to the same query than wht will be the solution ?
say there are 4 feilds in the query right now we add 2 feilds
in future the Customer wants the another 2 feilds shd be added in the Query than wht will be the solution ??
i would like give the autorisation to the user for SQ01 , SQ02 and train hgim regarding the queries as oper the requirement
>guys correct me if iam wrong

Move Logical component to another system group

Similar Messages

Maybe you are looking for