Rror [postinstallscripts:WaitforCMS] CMS is not starterd, giving up

Installing on Solaris 10 machine. Installation runs for awhile then finishes with errors. Here is the error
rror [postinstallscripts:WaitforCMS] CMS is not starterd, giving up
I recently just installed BO 3.1 SP3 on solaris 10 without any issues so unsure what is causing this issue.
thanks

Try to add the hostname and IP address in the /etc/hosts file. Does your machine have more that one IP addresses?
Does the hostname contain any non alphanumeric characters like underscore etc?
Regards,
Stratos

Similar Messages

[XI 3.1] [error] [PostInstallScritps::WaitForCMS] CMS is not started

solaris
Oracle 11g
Tomcat 5.5
BOE xi 3.1 sp3
When I install BO It installs with one error message
[error] [PostInstallScripts::WaitForCMS] CMS is not started, giving up.
we are doing clustering on our UAT servers(2 servers), i did the installation on node 1( i mean server 1) it was good i am able to login into cmc and see all the servers up and running.
When i install it on node2(server 2) which i need to cluster i am unable to install it properly.I did expand or custom installation and i am using the existing CMS whose system you want to expand this is the error message i am getting
[error] [PostInstallScripts::WaitForCMS] CMS is not started, giving up.

Are both servers have same OS version and patches :yes
Are you using same Oracle client version : yes
What is the exact version of your oracle client :11.1
Are all ENV variables set the same on both servers : yes
During installation CMS service attempts to start, so that some post install scripts can be run. In your case CMS failed to start, so installer was not able to run those scripts....
if you look at your ccm.config file - do you see the SIA in there :
#!/bin/sh
SERVICENAME_AUDIT="ODST01U"
NAMESERVER="tss5s363n2"
DBTYPE="Oracle"
INSTALLTYPE="custom"
REINIT="no"
BOBJEVERSION="12.0"
SHUTDOWNPORT="8005"
REGFILE="/apps/efs_bobj/software2/bobj1/bobje/data/.bobj"
DBTYPE_AUDIT="Oracle"
CLUSTER_NAMESERVER="169.69.194.76"
CONNECTORPORT="8080"
SIAPORTNUMBER="6410"
BOBJELANG="en"
BOBJELICENSEKEY="XXXX-XXXK43G-00UA00M-P1X2"
PRODUCTID_NAME="BusinessObjects"
PRODUCTID_VER="12.3"
LOCALNAMESERVER="tss5s363n2"
PIDDIR="/apps/efs_bobj/software2/bobj1/bobje/serverpids"
CMSCLUSTER="yes"
REDIRECTPORT="8443"
SIANODENAME="cmsbobj2"
INSTALL_DIR="/apps/efs_bobj/software2/bobj1/bobje/"
DEFAULT_NAMESERVER="tss5s363n2"
BOBJEUSERNAME="a_efsbobj"
CMSNAMESERVER="tss5s363n2"
DATABASEUID="bocms"
BOBJEDIR="/apps/efs_bobj/software2/bobj1/bobje/"
BOBJEINSTALLLOCAL="user"
SERVICENAME="ODST01U"
CMSPORTNUMBER="6405"
CLUSTERPORTNUMBER="6400"
cmsbobj2LAUNCH='"/apps/efs_bobj/software2/bobj1/bobje/enterprise120/generic/bobjrestart.sh" -protect "/apps/efs_bobj/software2/bobj1/bobje/enterprise120/generic/javalaunch.sh" "-
Dbobj.root.internal=/apps/efs_bobj/software2/bobj1/bobje" -Djava.net.preferIPv4Stack=false -jar "/apps/efs_bobj/software2/bobj1/bobje/java/lib/SIA.jar" -boot "/apps/efs_bobj/soft
ware2/bobj1/bobje/enterprise120/solaris_sparc/_boe_cmsbobj2.bootstrap" -cmspath "/apps/efs_bobj/software2/bobj1/bobje/enterprise120/solaris_sparc/boe_cmsd" -cmsdir "/apps/efs_bob
j/software2/bobj1/bobje" -port "6410" -pidFile "/apps/efs_bobj/software2/bobj1/bobje/serverpids/cmsbobj2.pid" -loggingPath "/apps/efs_bobj/software2/bobj1/bobje/logging" -name "c
msbobj2" -dbinfo "/apps/efs_bobj/software2/bobj1/bobje/enterprise120/solaris_sparc/_boe_cmsbobj2.dbinfo" -piddir "/apps/efs_bobj/software2/bobj1/bobje/serverpids"
what happens if you run cmsdbsetup.sh - does it show correct DB connectivity and cluster name : when i executed cmsdbsetup.sh command i am able to see this
Current CMS Data Source: ODST01U
Current cluster name: tss5s363n1.svr.us.XXX.net:6400
err: ERROR Failed to get auditing data source name. (STU00164)
err: Error description: The data source name (DSN) could not be extracted from the connection string.
if you run serverconfig.sh and list all SIA - does it show any SIA's :
i am able to see cmsbobj2 (sia)
Edited by: richa123 on Mar 1, 2011 6:28 PM

CMS is not started, giving up while Insatlling Business Objects XI 3.0

Hi
I am trying to install Business Objects XI 3.0 in Linux. But it is failing at 55% all the time. I checked the log at that time and it is like
*[info] Return code from cmslogon.jar: 1*
*[info] ... waited for 160 seconds ...*
*=== [1249047696] Begin: Execution of Java: -jar "/bobje/BO1/setup/utils/cmslogon/cmslogon.jar" "pokcbsapdb13:6400" Administrator "" secEnterprise*
*=== [1249047696] Begin: /bobje/BO1/bobje//jdk/bin/java -Xmx256M -Djava.net.preferIPv4Stack=false -jar "/bobje/BO1/setup/utils/cmslogon/cmslogon.jar" "pokcbsapdb13:6400" Administrator "" secEnterprise 2>&1*
*[info] Working directory: /bobje/BO1/bobje*
*[info] Return code: 1*
*=== [1249047697] End: /bobje/BO1/bobje//jdk/bin/java -Xmx256M -Djava.net.preferIPv4Stack=false -jar "/bobje/BO1/setup/utils/cmslogon/cmslogon.jar" "pokcbsapdb13:6400" Administrator "" secEnterprise 2>&1*
*=== [1249047697] End: Execution of Java: -jar "/bobje/BO1/setup/utils/cmslogon/cmslogon.jar" "pokcbsapdb13:6400" Administrator "" secEnterprise*
*[info] Return code from cmslogon.jar: 1*
*[info] ... waited for 170 seconds ...*
and this is repeating till 210 seconds
I have opted for this steps while installing
1. New enterprise install ( enable severs after installation)
2. Default ports
3. Use existing database(oracle).
4. Use existing Java application server, do not deploy web applications.
Please help with your suggestion.

Hi Tim,
I already try installing with MySql and I can see again these messages in my installation log file.
At the moment SAP Support can not give any advice to resolve this problem, do you have any idea why this can be?? and if somebody know anything about the error message that said "method amibiguos" because i believe there is the problem.
These are the resolution sending by SAP, I already try this but still the same.
Symptom
Segmentation fault during the CMS initialization phase of the install
Core file may be created in the <bobje> directory and install will abort
Gdb output of the core file shows the following:
#0 0xf63cdeee in process_next_block () from <install location>/bobje/enterprise120/linux_x86/libWrapCryptoC.so
Reproducing the Issue
1. Launch installation of XIR3 or XIR3.1 on Linux running on AMD Quad Core Opteran chipset
2. Monitor the installation and notice that at approximately 55% during the install the CMS initialization phase will begin
3. CMS initialization will throw a segmentation fault and the installation will abort
Cause
The issue has been identified as a product defect and tracked under ID ADAPT01258674. The defect is in a 3rd party library which is embedded in Business Objects XI3.1 release.
Resolution
Launch the Business Objects XI3.1 installation on Linux.
Wait for the installer to extract the libWrapCryptoC.so file under <install location>/bobje/enterprise120/linux_x86 directory. This will happen well before the install reaches 55% completion.
While the install is running, and before the CMS initialization begins, replace the libWrapCryptoC.so under the <install location>/bobje/enterprise120/linux_x86directory with the modified file (see attached).
Let the install continue and you will see the CMS initialize successfully.
The file is uploaded on the SAP site.
Thanks.

I was updating my ipad 2 and got it disconnected and its not responding,giving a blank screen with apple logo. when i connect it to itunes then it is giving an error that enter your passcode but the screen is blank how can enter my passcode?

I was updating my ipad 2 and got it disconnected and its not responding,giving a blank screen with apple logo. when i connect it to itunes then it is giving an error that enter your passcode but the screen is blank how can enter my passcode?

What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom

Why not nokia giving belle or other better update ...

why not nokia giving belle or any other update for 5233, 5235, 5230
Many of indians nokia phone user has disspointed after seeing android, and belle user interfence for other phones and not for nokia 5233,35,30 phones . Many of nokia users disspointed after that many of nokia users moving to android and other phons and not for nokia after that,
Why not nokia giving any update hor these phones ..
Solved!
Go to Solution.

The devices you mentioned are symbian S60V5. These cannot be upgraded to Nokia belle or such. They have hardware limitations.
In Love With My C6-01:Now running on Nokia Belle!

Hello, i dowload the new itunes 10.5 and now when i plug my new ipod 4 say the movil divice is not starterd , any help please

hello, dont let me dowload the new ios5, or i dont now how. please i really need help, when i dowload the new itunes 10.5 whe i plug in my ipod4 get me a warning saying " this ipod cannot be used because the apple movile device service in not starterd" . what means this?
any help

renatofrombronx wrote:
hello, dont let me dowload the new ios5, or i dont now how. please i really need help, when i dowload the new itunes 10.5 whe i plug in my ipod4 get me a warning saying " this ipod cannot be used because the apple movile device service in not starterd" . what means this?
any help
Try to reinstall Itunes, maybe is internal problem.

Forms10g is not running, giving this error

Hi , i want to run my form in 10g but its not running giving the following error. i starts oc4j and also given the forms path and working directory in the formsweb.cfg .
Network Error (tcp_error)
A communication error occurred: "Connection refused"
The Web Server may be down, too busy, or experiencing other problems preventing it from responding to requests. You may wish to try again at a later time.
For assistance, contact your network support team.

You don't need to worry about the port number if running from the forms builder directly.
Let me tell you how it worked with me:
I installed oracle developer suite normally.
Then I edited the registry:
start--> Run --> regedit
1-forms_path : add the path in which you placed your fmb.
2-Add a new entry ORACLE_PATH and in this one also add the path.
Run the form from the forms builder directly
Regards
AK

CMS is not started

Hi, I installed trial version of Business Objects Edge series. DUring installation system asked me to logon into CMS to configure but I don't know what password I was suppose to give and thus after multiple tries I decided not to logon. Now I see that CMS server is stopped and I am not able to start and I dont know what to do. I can not at all login into anything.
Thanks,

Hi, The version is 11.5.8.826.
The serve log is given below. I repeat that during the end of installation it asked me to enter the password for CMS. I did not know what the password would be so I had to cancel that and thus CMS did not get configured. Please let me know how I can do it now or I have to reinstall. Please also let me know what would be the first time password.
================================
Timestamp ProcessID ThreadID Message
[Fri Aug 01 03:05:29 2008] 1924 660 assert failure: (.\ObjectSubsystem.cpp:1663). (thisList->RemoveKey( pf ) : no message).
========================
Edited by: Kalpesh Pandey on Aug 1, 2008 3:46 PM

CMS is not running

Hallo everybody,
The CMS is not running. How can I make it run?.
I have it in a VM, running under Win XP.
I have this messages:
In the SIA in properties/Configuration
Failed to retrieve cluster name from the database. Reason: BusinessObjects Enterprise CMS: Unable to connect to the CMS system database "BOE120:localhost:3306". Reason: Database access error. Reason Can´t create table "c:windows emp#sql4d8_b_3.frm" (erno: 121)...
When I pretend to run any BOE application appers:
The system pbe917w can be contacted, but there is no Central Management Server running at port 6400.
And these are my parameters I have in SIA in properties/properties/Command:
-boot "C:ProgrammeBusiness ObjectsBusinessObjects Enterprise 12.0win32_x86_boe_PBE917W.bootstrap" -cmspath "C:ProgrammeBusiness ObjectsBusinessObjects Enterprise 12.0win32_x86cms.exe" -cmsdir "C:ProgrammeBusiness ObjectsBusinessObjects Enterprise 12.0win32_x86" -port "6410" -dbinfo "C:ProgrammeBusiness ObjectsBusinessObjects Enterprise 12.0win32_x86_boe_PBE917W.dbinfo" -loggingPath "C:ProgrammeBusiness ObjectsBusinessObjects Enterprise 12.0Logging" -name "PBE917W" -piddir "C:ProgrammeBusiness ObjectsBusinessObjects Enterprise 12.0serverpids" -protocol "default"
Thanks

Hi Gokul_sapgeek,
Yes, every setting is alright, because after a (long) while and several intents, it works.
What I don´t understand what is wrong and doesn´t work.
What changes and make it run.
When I refered to intents is:
In the Central Configuration Manager, I try several times to Log on to Manage Servers, it gives me the previous messages, but suddenly it WORKS.
I do not change any setting, just try and try, and it works.
Thanks

After Fresh Install CMS does not start

Hello BO Gurus,
I have got a blank Installation of BO 4.0.
At Install CMS does not start.
I have got a:
- BO 4.0
-Windows 7 Server Enterprise, SP1
Trace shows:
....Server MSMYSERVER3:6400 ... was not found or is possibny down.... (FWM 01003) Connection refused: connect
...Is the CMS alive? Ensure the CMS supports SDK version 1400
How to start CMS ?
Which Username to take to start CMS ?
What is SDK version 1400 + ?
Where to get SDK version 1400 + ?
Thank You !
Best Wishes
Martin

Could also be a database connection issue.
What database are you running?
We've had an issue where the database (MSSQL) was hosted on a seperate server and where Windows Authentication was used. To resolve the issue, we had to change the Server Intelligence Agent (SIA) service to start with the Windows/domain account.
Regards,
CJ

Integration Directory - Transport using CMS does not appear

Hi guys,
I'm having problems with one thing I thought it would be trivial.... I'm not able to get the option 'Transport using CMS' in the Integration Directory available.
I've done the necessary steps on the exchangeProfile in order to transport objects using CMS.
1. Configuring ExchangeProfile
IntegrationDirectory
com.sap.aii.ibdir.core.cms.enableTransportWizard=true
com.sap.aii.ibdir.core.cms.enableClTransport=true
IntegrationRepository
com.sap.aii.ibrep.core.cms.enableClTransport=true
com.sap.aii.ibrep.core.cms.enableTransportWizard=true
Added the values to com.sap.aii.ib.client.properties
u2022 com.sap.aii.ibrep.core.cms., com.sap.aii.ibdir.core.cms.
2. And after, I've created the tracks needed for IntegrationRepository and IntegrationDirectory.
For the IntegrationDirectory I've followed SAP's description:
"You have created an XI track in the Landscape Configurator and entered the addresses of the development, consolidation, and productive directory. There are no software component versions in the Integration Directory. Therefore, for directory transports using the CMS, you specify the software component version SAP-INTDIR 3.0 (EXCHANGE DIRECTORY 3.0). This refers to all configuration objects of the Integration Directory.
Once you have made this setting, you can create transport lists for the CMS. The status of the change lists no longer changes to Closed immediately after their release, but first changes to Transportable."
3. I've restarted the J2EE Server.
When I export the objects from IntegrationRepository everything runs OK, but on the IntegrationDirectory I'm not able to have the option 'Transport Using CMS' available.
I've read several threads on the SDN but none of them solved the problem...
Can anyone give me any hint ?

Hi Sameer,
No luck.... There's nothing similiar to what I'm describing and the points which are mentioned i've already covered them.
Thanks for the tip, I was hoping it could give me a push...
Any ideas...?

Our CMS does not support new version of Firefox. Can I have the "downgraded" version of Firefox AND the upgraded Firefox both on my Mac, so I can use the older Firefox to manage my CMS?

Essentially, the CMS we use to manage our website (mainstreetartsfest.org) is Sitefinity, and apparently it doesn't support the newest version of Firefox. And, from what I understand, this version of Sitefinity is not being upgraded at the support level - we are now being asked to spend $$ on moving to a new CMS to support the browsers. Chrome, Safari also a problem. Only IE works, and we all have Macs. I want to know if we can have the older Firefox AND the upgraded Firefox both on our computers so we can use the new Firefox for general browsing, and resort to the older, 3.2 version for managing the CMS. I know I can download a previous version - but I would rather not replace our new version of Firefox in the process.

You can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com

HTTP PUBSUB not initializing giving [ Error: missing } in XML expression ]

Hi
I am using WEBLOGIC 10.3 pusub sever and dojo-release1.1.1
**I have created a channel with the following config as below**
<wlps:channel-constraint>
<wlps:channel-resource-collection>
<wlps:channel-resource-name>subscribe</wlps:channel-resource-name>
<wlps:description>subscribe channel constraint</wlps:description>
<wlps:channel-pattern>/DispatchView/**</wlps:channel-pattern>
<wlps:channel-operation>subscribe</wlps:channel-operation>
<wlps:channel-operation>create</wlps:channel-operation>
<wlps:channel-operation>publish</wlps:channel-operation>
</wlps:channel-resource-collection>
In my client side I have the following code in a page.
dojo.require("dojox.cometd");
var DEFAULT_CHANNEL = "/DispatchView/PubSub";
cometInit = function(){
               dojox.cometd.init("cometd");
               log( 'cometd initialized' );
onMessage = function(msg) {
     log( 'onMessage() ' + msg.data.test );
//alert(msg.data.test);
//handles subscribe onclick
onSubscribe = function(){
     dojox.cometd.subscribe( DEFAULT_CHANNEL, 'onMessage');
     log( 'subscribed to ' + DEFAULT_CHANNEL );
cometInit();
onSubscribe();
Whenever I am opening the page its giving me the following error.
[ Error: missing } in XML expression ]
handshake error!: [ Error: missing } in XML expression ]
cometd init failed
Retry in interval+backoff=0+4000=4000ms
[ Error: missing } in XML expression ]
handshake error!: [ Error: missing } in XML expression ]
cometd init failed
Retry in interval+backoff=0+5000=5000ms
Am I missing something. Can any body help me with this.

Hi,
The problem in your code is you haven't mentioned the server URL which is needed to subscribe.
dojox.cometd.init("cometd"); this is a wrong intitialization instead you have to use
dojox.cometd.init("http://localhost:9002/pubsub"); or something like this with an appropriate URL. In this URL /pubsub is context path and not the default channel you subscribe. This was the reason for your error (cometd init failed)
Please let me know if the problem get solved or still u have any queries regarding the same.

Crystal Enterprise 10 CMS Server not coming up

Hello,
I am getting errors while trying to start Crystal Enterprise 10 on UNIX. The CMS server does not come up. I turned on the trace for the startup script and below is the error log. Can someone help me diagnose the issue please. If this is due to corrupt registry or corrupt objects, can I just restore from backup of the registry directory and restart?
Thanks.
-James
Output from crystalmsd_20081019_123014_24611.log
Timestamp       ProcessID       ThreadID        Message
[Sun Oct 19 12:30:15 2008]      24611   1       (wireobinit.cpp:134): trace message: CWireObject::InitializeStaticPropertyMap() - reference count: 0
[Sun Oct 19 12:30:15 2008]      24611   1       (wireobinit.cpp:149): trace message: Creating the shared CWireObject::PropertyNameMap
[Sun Oct 19 12:30:15 2008]      24611   1       (wireobinit.cpp:172): trace message: Setting static property map
[Sun Oct 19 12:30:16 2008]      24611   1       Log: level=3 cat=1 msg=35100 p=Crystal Management Server started
[Sun Oct 19 12:30:16 2008]      24611   1       trace message: SIServerController::run: Before initialize
[Sun Oct 19 12:30:16 2008]      24611   1       (sidaemon.cpp:414): trace message: SUNIXDaemon::init: starting
[Sun Oct 19 12:30:16 2008]      24611   1       trace message: SUNIXDaemon::init: redirecting stdio to /dev/null
[Sun Oct 19 12:30:16 2008]      24611   1       (sidaemon.cpp:209): trace message: installing fg terminiation handler
[Sun Oct 19 12:30:16 2008]      24611   1       (sidaemon.cpp:220): trace message: installing abnormal sys handler
[Sun Oct 19 12:30:16 2008]      24611   1       (sidaemon.cpp:504): trace message: SUNIXDaemon::init: finished
[Sun Oct 19 12:30:21 2008]      24611   1       trace message: GetClockSequenceUpdater: Getting clock sequence updater
[Sun Oct 19 12:30:21 2008]      24611   1       Log: level=0 cat=1 msg=33015 p=DatabaseDriver
[Sun Oct 19 12:30:21 2008]      24611   1       Log: level=0 cat=14 msg=35101 p=The root server reported an error Initialization Failure.
[Sun Oct 19 12:30:21 2008]      24611   1       trace message: SIServerController:run: Fail to initialize or uninitialize. Reason is The root server reported an
error Initialization Failure.:
[Sun Oct 19 12:30:21 2008]      24611   1       trace message: Uninitializing TheAPSServer object.... shutdown in progress....
[Sun Oct 19 12:30:22 2008]      24611   1       Log: level=0 cat=1 msg=35730 p=Internal error: An unknown exception has occurred. Programmer error subsystem not
available before use
[Sun Oct 19 12:30:22 2008]      24611   1       assert failure: (siserver.cpp:882). (0 : The root server reported an error Initialization Failure. (Reason: Inter
nal error: An unknown exception has occurred.).:Internal error: An unknown exception has occurred. Programmer error subsystem not available before use
[Sun Oct 19 12:30:22 2008]      24611   1       Log: level=3 cat=1 msg=35100 p=Crystal Management Server stopped
[Sun Oct 19 12:30:22 2008]      24611   1       (wireobinit.cpp:284): trace message: CWireObject::TerminateStaticPropertyMap() - reference count: 1
[Sun Oct 19 12:30:22 2008]      24611   1       (wireobinit.cpp:291): trace message: Releasing static property map
[Sun Oct 19 12:30:22 2008]      24611   1       (wireobinit.cpp:49): trace message: Deleting the shared CWireObject::PropertyNameMap
~

Hi,
Try these,
1. Check whether the JDK version is an appropriate one and complete installation is done. Necessary entries of JAVA_HOME path is done in the Environment Variable.
2. Increase the heap size through Configtool of the J2EE Engine. After setting, restart the server.
3. Have the virtual memory increased.
Consider awarding points to helpful answer.
Regards
Srinivasan T

CMS Will not start. MS SQL not starting. Error: 9003, Severity: 20, S

Sometime in the last two weeks, the master MS SQL database has been corrupted. As a result the Central Management Server will not start and we can not log into our online Crystal Reports viewer. We are running 11.0.0.1282 and what ever version of MS SQL that installed with Business Object and Crystal Reports.
Is there anyway to recover this master database (no, we do not have a backup). Can it be reinitialized and then what steps do I need to go through to get back at our reports?
Thanks...
Glenn

Hi,
if you dont have a backup its getting worse. The CMS DB and FileStore Backups need to be in synch. You can re- initialize the DB...but all your Objects will be lost.
If the CMS doesnt start, you even cant backup your repots, universes etc. using the local client tools.
Regards
-Seb.

Rror [postinstallscripts:WaitforCMS] CMS is not starterd, giving up

Similar Messages

Maybe you are looking for