Move-Request
Hello,
Any particular reason why:
Get-MoveRequest -movestatus completed | remove-moverequest
works
but:
Get-MoveRequest -movestatus FailedOther | remove-moverequest
Doesn't?
Memento Mori
Because MoveStatus parameter can accept only below values.
AutoSuspended
Completed
CompletedWithWarning
CompletionInProgress
Failed
InProgress
None
Queued
Suspended
Reference:
Get-MoveRequest
If this is not the case, post what error you are getting when you run second cmdlet...
Similar Messages
-
Exchange 2013 shell mailbox move requests showing up on 2010 hub server
We're in the process of migrating from exchange 2010 to 2013. All servers are patched and up to date. We have two 2010 CASs (one for external OWA use only) and a mailbox cluster. Our exchange 2013 setup is almost a mirror with the exceptions of how the exchange
server roles have changed.
Any new-moverequest commands entered from the either of our exchange 2013 CAS servers fail to show up in the EAC/recipients/migration page.
If the local move request is done in the EAC the batch(es) show up just fine.
The more perplexing part is: while I was going through a 2010 hub (looking for a different issue) I noticed ALL the batches/mailbox moves that weren't showing up in the 2013 EAC were listed in the 2010 move request section.
I can't get any info on the moves in the 2010 console (because they're 2013 jobs) but i can get statistics and such from a 2013 shell.
any ideas?Are you running ex2013SP1 CU6? Can you try to update n check?
Thanks, MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. -
Problem clearing a move request
Hi,
I've got a simple Exchange 2010 setup running along a 2007 insallations.
I have 2 DC's both running 2008 but not R2.
My issue is, I have moved a couple of users using the local move request. One of them I delete the move request as soon as it had been completed (the icon changed back to the one without the little green arrow), but the other gives me an error message of
Microsoft Exchange Error
Action 'Clear Move Request' could not be performed on object 'Enid Dalton'.
A User
Failed
Error:
Couldn't find a move request that corresponds to the specified identity 'home.local/Top Level/2nd Level A/A User.
The user exists and has not been moved within the OU structure.
In a real world situation, this would then stop me from moving the user again. Obviously this doesn't happen every day, but a user could move offices for a short period of time and wish to move the mailbox to a local server.
Any idea's ?
Thanks in advance
Phil
Remember : Experience is something you don't get until just after you need it.When migrating from 2007 or 2010 to 2013 Exchange, if the account was deleted before the move request was cleared, or it was put into a different OU, you can force clear the move request as follows:
Get-MailboxDatabase|%{Get-MoveRequestStatistics-MoveRequestQueue
$_.Name}
|SortPercentComplete|MailboxIdentity,ExchangeGuid,RequestQueue,StatusDetail
Remove-MoveRequest-MailboxGuid
$MbxGuid-MoveRequestQueue
$MoveReQ-Verbose -
I am in the process of doing a migration from SBS 2003 std. edition to SBS 2011 std. I am at the point the migrating mailboxes from the Exch 03 server to the Exch 2010 server. I initially received an error when selecting mailboxes that the mailbox
db on the Exch03 server did not exist. I followed the resolution steps from another forum post to add the Exch 2010 server to the "first administrative group" via the security tab and give full permissions. This solved that issue and
I was able to proceed through the wizard to actually create the local move request. However, after processing the request, I get the following error...
Summary: 1 item(s). 0 succeeded, 1 failed.
Elapsed time: 00:00:03
<username>
Failed
Error:
Mailbox database '0180b88c-0cb2-4b2f-981a-6bdaecc10fcb' is offline.
MapiExceptionLogonFailed: Unable to make connection to the server. (hr=0x80040111, ec=1010)
Diagnostic context:
Lid: 13720 dwParam: 0x6D9 Msg: EEInfo: Flags: 0
Lid: 11672 dwParam: 0x6D9 Msg: EEInfo: NumberOfParameters: 4
Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[0]: Unicode string: ncacn_ip_tcp
Lid: 8856 dwParam: 0x6D9 Msg: EEInfo: prm[1]: Unicode string: <Exch03server>.<domainname>.local
Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[2]: Long val: -545057711
Lid: 12952 dwParam: 0x6D9 Msg: EEInfo: prm[3]: Long val: 382312662
Lid: 45169 StoreEc: 0x824
Lid: 44273
Lid: 59431 EMSMDB.EcDoConnectEx called [length=114]
Lid: 34855 EMSMDB.EcDoConnectEx returned [ec=0x3F2][length=56][latency=4]
Lid: 56945
Lid: 59431 EMSMDB.EcDoConnectEx called [length=114]
Lid: 34855 EMSMDB.EcDoConnectEx returned [ec=0x3F2][length=56][latency=4]
Lid: 59505 StoreEc: 0x3F2
Lid: 52465 StoreEc: 0x3F2
Lid: 60065
Lid: 33777 StoreEc: 0x3F2
Lid: 59805
Lid: 52209 StoreEc: 0x3F2
Lid: 19778
Lid: 27970 StoreEc: 0x3F2
Lid: 17730
Lid: 25922 StoreEc: 0x3F2
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.1.218.11&t=exchgf1&e=ms.exch.err.ExC2B9A8
Exchange Management Shell command attempted:
'<domainname>.local/MyBusiness/Users/SBSUsers/<username>' | New-MoveRequest -TargetDatabase 'Mailbox Database 2011012823'
Elapsed Time: 00:00:03
I have tested running the command from the EMS and get the following...
Mailbox database '0180b88c-0cb2-4b2f-981a-6bdaecc10fcb' is offline.
+ CategoryInfo : NotSpecified: (0:Int32) [New-MoveRequest], RemoteTransientException
+ FullyQualifiedErrorId : AC277C79,Microsoft.Exchange.Management.RecipientTasks.NewMoveRequest
On the Exch03 Server I have verified/tested/done the following:
--Verified the Information Store Service is running
--Tested restarting the service
--Verified the Mailbox store is mounted
--Tested Dismounting and mounting
--Tested the Exch2010 mailbox db store is functioning properly by creating a test account and verifying w/ OWA.
--Verified routing group b/w servers
--verified network connectivity b/w servers
--Verified DNS is functioning properly on both servers
--Installed Exchange Server MAPI Client and CDO 1.2.1 on Exch2010 server.
--Tested rebooting both severs
I am at a loss. Any ideas would be greatly appreciated. I am unable to continue w/ the migration until I get past this step.Hi,
Thank you for sharing the resolution.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Thanks Gen Lin-MSFT -
Mailbox move requests remain in Queued status
My server is part of a two member DAG. DAG shows to be healthy. I have turned logging up to Expert level but no useful data is generated (only shows that the move request was created; no problems are indicated)
Server is Exchange 2010 SP 3Hi,
Please check the database copy status under management tab on source database and target database. This can be that one or more of those databases you are moving mailboxes to has a failed or suspended copy and its failing the DataMoveReplicationConstraint
check.
Refer to this blog about Exchange 2010 Mailbox Moves and Mailbox Resiliency
http://blogs.technet.com/b/exchange/archive/2011/05/06/exchange-2010-mailbox-moves-and-mailbox-resiliency.aspx
In addition, please check the event log on the Client Access server running the instance of the Microsoft Exchange Mailbox Replication service that's processing the failed move request.
Best Regards. -
Hi
I have a user where I removed the failed moverequest. If I take a look at the user at the on-premise EMC he still has the little Move Request ICON. I can not move him again now.
I tried to create a migration batch from Office 365, but that was "stalledduetomailboxlock"
Then I stopped the batch, but now that is in "Stopping"
How can it go this bad - and what can I do to clear everything?
BR
SteenRun Get-MoveRequest in Online PowerShell. Run the same cmdlet in the Exchange Management Shell. Make sure that there is no move request for the user in either side. If there is, delete it.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems." -
How to remove failed mailbox move request
Hi all,
Exchange 2010 SP1
i canceled or move failed on several mailboxes. How can I move these mailboxes again since
they still have move request checked?
Thank you.Hi JaneHHH,
Here are some examples:
To just remove the failed moverequests in EMS, RUN Get-Moverequest -MoveStatus Failed | remove-moverequest
Move all moverequests in EMS, RUN get-moverequest | remove-moverequest
You can of course also remove them in EMC, but a simple right-click the once you want to move in EMC|Recipient Configuration|Move Requests and choose "Clear Move Requests"
:Martina
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
New mailbox move request Exchange 2010 : queued
I have deployed new Exchange 2010 server in Exchange 2003 Organization. It is simple setup one Exchange 2003 and New Exchange 2010.
I was trying to move mailbox from Exchange 2003 to 2010 and it has status of QUEUE “indefinetly”.. I have tried several mailboxes and result is the same.
Then I decided to create new database on Exchange 2010 sever. I have crate new mailbox on Exchange 2010 sever, send and receive some emails. And then try to move mailbox to new database. Same results.
I run test MSR replication and is ok.
I have increase msr LOGGING TO Maximum, no errors. I have rebooted server several times, no differences…Hi,
Based on the description, status of mailbox move request from Exchange 2003 to Exchange 2010 is "indefinitely".
Please make sure mailbox databases in Exchange 2010 and Exchange 2003 are mounted.
Have you moved mailbox using the New-MoveRequest with the BadItemLimit and the AcceptLargeDataLoss parameters? If not, it's worth to do it again. Before you create a new move request, please check if there is any previous move request. If there is, please
clear the previous move request and then move the mailbox.
If the issue persists, please try to move mailbox to another database in Exchange 2003 and then move to Exchange 2010 to check the result.
Best regards,
Belinda
Belinda Ma
TechNet Community Support -
Exchange 2010 move request failed with MapiExceptionCallFailed
hi
Attempting a local move request of Mailbox but it fails.
plz help
Request 'xxxxxxx' (c307df02-04f8-4428-855e-40cfd89fa67f) failed.error code: -2147467259
MapiExceptionCallFailed: IExchangeFastTransferEx.TransferBuffer failed (hr=0x80004005, ec=1162)
Diagnostic context:
Lid: 55847 EMSMDBPOOL.EcPoolSessionDoRpc called [length=2082]
Lid: 43559 EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=689][latency=0]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropFXDstCopyConfig [83]
Lid: 27962 ROP: ropTellVersion [134]
Lid: 27962 ROP: ropFXDstPutBufferEx [157]
Lid: 17082 ROP Error: 0x48A
Lid: 31329
Lid: 21921 StoreEc: 0x48A
Lid: 27962 ROP: ropExtendedError [250]
Lid: 1494 ---- Remote Context Beg ----
Lid: 1238 Remote Context Overflow
Lid: 1947 StoreEc: 0x48A
Lid: 1435 StoreEc: 0x48A
Lid: 1947 StoreEc: 0x48A
Lid: 1435 StoreEc: 0x48A
Lid: 1947 StoreEc: 0x48A
Lid: 4559 StoreEc: 0x48A
Lid: 21802
Lid: 19994 StoreEc: 0x48A
Lid: 20202
Lid: 3305 StoreEc: 0x48A
Lid: 32762 dwParam: 0x3FE70003
Lid: 32762 dwParam: 0x361384B0
Lid: 32762 dwParam: 0x36170003
Lid: 32762 dwParam: 0x36DA0102
Lid: 32762 dwParam: 0x36E00102
Lid: 32762 dwParam: 0x3FD60040
Lid: 32762 dwParam: 0x3FE4000B
Lid: 32762 dwParam: 0x67590102
Lid: 32762 dwParam: 0x675A0102
Lid: 32762 dwParam: 0x30080040
Lid: 32762 dwParam: 0x675C0102
Lid: 32762 dwParam: 0x65E30102
Lid: 32762 dwParam: 0x67510003
Lid: 32762 dwParam: 0x672D0003
Lid: 32762 dwParam: 0x673384B0
Lid: 32762 dwParam: 0x673284B0
Lid: 26346
Lid: 4073 StoreEc: 0x48A
Lid: 28570 StoreEc: 0x48A
Lid: 29738
Lid: 3401 StoreEc: 0x48A
Lid: 1750 ---- Remote Context End ----
Lid: 26849
Lid: 21817 ROP Failure: 0x48A
Lid: 22630
Context:
Operation: IMapiFxProxy.ProcessRequest
OpCode: TransferBuffer
DataLength: 2362
Operation: IMapiFxProxy.ProcessRequest
OperationSide: Target
Primary(c307df02-04f8-4428-855e-40cfd89fa67f)
OpCode: TransferBuffer
DataLength: 2362
Any ideas? any help much appreciatedWhat version of Exchange 2010? SP2, RU #? I saw this support article form MS for 2003 --> 2010
http://support.microsoft.com/kb/2579051. Not sure if it is applicable. It could be you need to go to RU4 for SP2 Exchange 2010. Do not install RU5 as there were issues.
I've also run into several support articles about ACLs on the mailbox or fiolders:
http://runebelune.blogspot.com/2010/11/mapiexceptionnosupport.html [remember that Exchange 2010 you need to use ExFolders and not PFDAVAdmin]
http://social.technet.microsoft.com/Forums/hi-IN/exchangesvrdeploylegacy/thread/73a385d5-ea2f-47b9-87f0-c481b1f29b35
Let me know if I can provide any additional help.
JAUCG -
Exchange 2010 Local Move Request with Error (hr=0x80004005, ec=1292)
Trying to migrate from exchange 2003 to 2010.
Ran a Local move request and received the following error.
What can I do?
Summary: 1 item(s). 0 succeeded, 1 failed.
Elapsed time: 00:00:01
Aman Amiri
Failed
Error:
MapiExceptionMailboxInTransit: Unable to open message store. (hr=0x80004005, ec=1292)
Diagnostic context:
Lid: 45095 EMSMDB.EcDoRpcExt2 called [length=121]
Lid: 61479 EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=48][latency=18]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropLogon [254]
Lid: 17082 ROP Error: 0x50C
Lid: 26937
Lid: 21921 StoreEc: 0x50C
Lid: 31418 --- ROP Parse Done ---
Lid: 22753
Lid: 21817 ROP Failure: 0x50C
Lid: 26297
Lid: 16585 StoreEc: 0x50C
Lid: 32441
Lid: 1706 StoreEc: 0x50C
Lid: 24761
Lid: 20665 StoreEc: 0x50C
Lid: 25785
Lid: 29881 StoreEc: 0x50C
Exchange Management Shell command attempted:
'RWR.local/MyBusiness/Users/SBSUsers/Aman Amiri' | New-MoveRequest -TargetDatabase 'Mailbox Database 1110868248' -BadItemLimit '0'
Elapsed Time: 00:00:01Hi
Is the database on Exchange 2010/2003 mounted and all services started?
Is your account part of Organization Management and able to perform the move requests? -
No "New Remote Move Request" option anymore
We have been migrating mailboxes from Ex2010SP1 to Office365 using the EMC, and it's generally been going well. However, several of the migration mailboxes failed, and I could remove the move request from the O365 forest without issues and the mailbox
would become available for migrating again, but several of them do not. They have stayed with the green icon as though they should still be migrating, yet they have no move request left as I deleted the failed move requests. (I confirmed via
Powershell). It has been several days for most of these ones, yet they still are not available to migrate again. Other mailboxes that have not yet migrated are still available and have the option to do a "New Remote Move Request" as normal.
Has anyone else encountered this or have any suggestions for a solution to make them available to migrate again?
Ex2010SP1 on WinServer2008Hi SeanW74,
Per your description, you migrate the exchange email system to Office 365, and have some issue with the mailboxmoverequest.
Could you please check the moverequest using get-moverequest and post the information here.
How about to reboot the exchange server and make a test?
Some information for you:
http://technet.microsoft.com/en-us/library/dd351276.aspx
Regards!
Gavin
TechNet Subscriber Support
in forum
If you have any feedback on our support, please contact
[email protected]
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if
a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
New Local Move Request Script for Exchange 2010 mailboxes
Hi I would like to have a script that can enable me automatically move mailboxes of certain domains to a new mailbox database. E.g. new local move request to move only 20 mailboxes in mailboxdatabase01 with the domain name: mymove.com, moving
it to mailboxdatabase05. Also, I want to be able to adjust the number of mailboxes to move. Thanks in advance.Wrap this, or something similar, into a script that filters out the users with that domain in a particular DB.
http://technet.microsoft.com/en-us/library/dd876878(v=exchg.141).aspx
And some filtering examples are in here:
http://blogs.technet.com/b/rmilne/archive/2014/03/24/powershell-filtering-examples.aspx
I doubt there is a sample script out there that does exactly what you want, so you'll have to do some coding.
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter: LinkedIn:
Facebook:
XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose. -
Local move requests stuck with status "queued" at 0% completion
Hello all,
I'm running Exchange server 2010 SP3 with no aditonal RU.
Suddenly we are unable to perform local move requests of mailboxes between databases.
The requests will turn up in the list at Recipient "Configuration\Move Requests" but remain the with status Queued with 0% completion.
It does not matter if the move request is initiated by EMC of the Shell.
I cant find a solution so if someone has some advise that would be great,
I tried the following:
- Restarted the Mailbox Replication service on the CAS server
- Rebooted the Mailbox, CAS and Edge server
- Run a Test-MRSHealth check against the CAS
- Checked all logs but there are no related entries
- Checked my admin account permissions
- Checked if it is related to certain mailboxes and source and destination databases which isn't the case
What else can I do or check?
Kind regards,
AlexHi,
You mentioned you checked the event log, but there was no related events.
Have you tried to use the get-moverequest | get-moverequeststatistics cmdlet to check result?
If no, please run this command to see if there is any clues that can be used to narrow down this issue.
Best regards,
Belinda
Belinda Ma
TechNet Community Support -
Can't connect via outlook after remote move request.
Hi All,
i want to ask something about outlook connectivity,i was do remote move request from different forest. after move request completed, i try login the account
using ms outlook 2010. but got some error like this, "Cannot open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize your
folder with your outlook data file (ost)."
if i try login using OWA, its successful,
i was enable/disable MAPI from this mailbox, but not the solution. finding in google, i found this
link . but not the solution.
anyone have some experience with my trouble?.
thanks in advance.Hi Rambosality,
According to your description, I understand that outlook cannot connect to Exchange server with error “Cannot open your default e-mail folders. You must connect to Microsoft Exchange with….” When move mailbox.
I want to double confirm some points, please help to collect answers for following question:
1. All account or some special account experience this issue?
2. How about re-create Outlook profile for test?
Please try to use Test-OutlookConnectivity and Test-OutlookWebServices test end-to-end Microsoft Outlook client connectivity, availability service and etc. More details for this command, please refer to:
http://technet.microsoft.com/en-us/library/dd638082(v=exchg.141).aspx
http://technet.microsoft.com/en-us/library/bb124509(v=exchg.141).aspx
Additional, I find an article about RPC Client Access Cross-Site Connectivity Changes. It discuss about RPCClientAccessServer setting after move mailbox cross-site, for your reference:
http://blogs.technet.com/b/exchange/archive/2012/05/30/rpc-client-access-cross-site-connectivity-changes.aspx
Best Regards,
Allen Wang -
My question is - Can we migrate a mailbox from Exchange Server 2010 to Exchange 2013 with remote move request. If yes then please share a related document.
Thanks a LotHi Pareek,
Thank you for your question.
If we want to create a mailbox migration cross and target forest is Exchange 2013, we suggest you upgrade source forest Exchange 2010 to Exchange 2013,
https://technet.microsoft.com/en-us/library/jj898583%28v=exchg.150%29.aspx
Then, we could refer to the following link to migrate cross domain:
https://technet.microsoft.com/en-us/library/ee861103(v=exchg.150).aspx
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Jim Xu
TechNet Community Support -
Exchange crash during move request, new DB in dirty shutdown
I had a hardware failure (storage controller in VM environment) during a mailbox move request to a new DB. After fixing that and rebooting, the old database came up and is fine which is great. The new database is in a dirty shutdown state right now with a few completed but most are still queued or in progress. If I try to remove the request on the completed mailboxes it has a message along the lines of, couldn't connect to mailbox database, it could be dismounted. Do you want to orphan the move request for user XYZ?
Will this cause any problems? I would like to remove the move requests and proceed recovery and repair of the dismounted DB. Thoughts?
Thanks,
Josh
This topic first appeared in the Spiceworks CommunityHi,
Thank you for sharing the resolution.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Thanks Gen Lin-MSFT
Maybe you are looking for
-
Replicating Safari, Mail records of iMac apps to Macbook apps using TM
My IMac HDD died which is no prob since I have 3yr extended warranty and while it is out of commission (and just for plain convenience anyways) I wish to replicate my entire email archives PLUS and more importantly my autofill, history, cookies et al
-
Email links in Notebook after rebuild
I have been using Circus Ponies' Notebook for a while and have numerous links to emails scattered throughout the notebooks. I create them by dragging the header line from mail.app to the insertion point on the notebook page. This creates a link which
-
Do you need final cut pro to work it
do you need final cut pro to be able to use motion 5 can someone help me and what does motion do for a start?
-
Itunes keeps unchecking all songs
Recently downloaded newest version of Itunes. Itunes 10 point something. When I did- I found all my songs were unchecked. I have more than 200 GB of songs- so it took quite a while to check what songs I wanted. This was a week ago. Today when I ope
-
Including Adhoc Objects in Workflow Item
Hi, We have a process where we an External program that is creating IDocs for us and we have a Z FM to process this IDoc. If during processing within the FM the process dodnot complete we are raising a Workflow Event ( Z - Business Object ) that send