Move Software components

Hello,
I want to move XI Software component from one server to other server.They both point to different SLDs.
Can you suggest some way?
Thank you

First you should perform the SLD transport and then you may directly move the SWC from one IR to another. You may find SLD transports related blogs on SDN.
Regards,
Prateek

Similar Messages

Trying to Remove iTunes software components because of 11.1.4 update error and using Windows 7 uninstall Apple Mobile Device Support does not work. Any suggestions?

Had error while updating Itunes to ver 11.1.4. I had 11.1.3.8 previously. Following instructions for Removing and Reinstalluing iTunes and other software components. Was able to uninstall iTunes and Apple Software Update, but attempts to do the same under Control Panel failed for Apple Mobile Device Support (ver 7.0.0.117). Directioons say to uninstall components in order given so I cannot continue until Apple Mobile Device Support is removed. Any suggestions?

Try reparing and then remove again if the repair is successful, otherwise move on to the next step. See Troubleshooting issues with iTunes for Windows updates for more information.
tt2

Summary report to show all the software components and version installed

We are using 64bit Windows 2003 and Hyperion Planning and Essbase in 2 separate servers. I am not sure whether Windows can have a summary report to show all the software components and version installed and show it is 32bit or 64bit version installed?
Thanks!

Refer steps here to delete SC file.:
http://support.apple.com/kb/TS2363
Then proceed to repair your QuickTime. START / CONTROL PANEL / ADD n REMOVE PROGRAMS / highlight QUICKTIME and click CHANGE then REPAIR.

Error while trying to import Software components from SLD.

Hi Gurus,
Need Help.
When we are trying to import Software components from SLD we are getting following error. Could not read list of software component versions from SLD. In Description i am getting following two points.
1. Could not read list of software component versions from SLD (COULD_NOT_READ_SWCV)
2. User credentials are invalid or user is denied access
We have tried following
1. LCRSAPRFC and SAPSLDAPI are working fine.
2 SLDAPICUST is ok
3. In nwa connections are available for LCRSAPRFC and SAPSLDAPI.
Request you to let us know how to resolve this issue.
Thanks in advance.

Hello ,
Can you check below roles assigned to the user id?
SAP_SLD_CONFIGURATOR
SAP_SLD_DEVELOPER
SAP_SLD_ORGANIZER
Thanks

Message interface does not exist in any software components

Hi masters,
I'm having problems with this message in my repository when I try to create an Interface determination with two interfaces mapping: "Message interface does not exist in any software components installed on this business system".
note: I have read all the posts about this problem but nothing has solved it.
I will describe more or less how is my SLD.
First all, my Technical System is an Web AS ABAP (non a third party).
I have created two receivers determination, with out problems, then, created the interface determination, with two Inbound interface, BUT, when I create a condition, the message appears, and the XPath doesn't shows the nodes for do the condition..
I have checked the GUID, and that's good.
NOTE: I have a second SWC but this is a third party... and when I test to do the same in this system, I have NO problems... so.. what is wrong with the Web As ABAP?
Regards and thanks

did you mean:
SLD -> Technical System->Technical System Type: WebAsAbap-> Installed Products->Add New Product and add my Software Component???
if is this, I have already done this, and still doesn't works.
Thanks

Message interface does not exist in any software components installed on th

Message interface does not exist in any software components installed on this business system.
hello,
When I check the interfaces on the business systems of 1 technical system, none of them have sender or receiver interfaces, hance I can't use them. The interfaces should ofcourse be on the Directory.
I have deleted the business systems and the technical system and created them again, but no result.
The product and software componets are in the technical sytem and business systems.
Any help would be usefull.
thanks,
Job

Hello!
If someone will search in the future for this error, here is the solution:
The error occurs if the GUID of the software component at the SLD is different to the one at the repository. Please compare the GUID at the SLD -> Administration -> Content Maintenance -> Dropdown "Component Version" -> Dropdown "Software Component Version". At the Integration Repository you select the Software Component Version at at the tab "Keys" you find the related GUID.
The error occured because the Software component has been created manually at the system. The repository content came from another system via import with own SLD (and because of that with another GUID for the software component).
Kind regards,
Klaus

Message interface does not exist in any software components installed

"Message interface does not exist in any software components installed on this business system"
Essa é a mensagem de erro que estou tendo ao tentar configurar o XPath Receiver Determination do cenário SRVSC_WebAS_Outbound_ServiceStatusCheck.
Já notei que a mensagem dá porque o meu BS da NFe não está com o SWCV SAP SLL-NFE 1.0. Mas isso só no ID porque no SLD ele aparece. Não sei mais o que fazer pra ele aparecer no ID. Já eliminei o BS, executei um refresh do cache do SLD, depois executei um refresh full e nada! Quando eu crio o BS novamente, ele vem sem o SWCV SAP SLL-NFE 1.0.
Tive que configurar o XPath na mão para todas as SEFAZes!!!
Já li vários threads a respeito desse erro e executei vários procedimentos sugeridos, mas nada.
Alguém já possou por isso?!?

para ser mais preciso, verifique no payload de envio e recebimento da mensagem de verificacao de status do servico se estao correspondentes ao que estao abaixo, essa mensagem é de verificacao do SEFAZ de SP (35) para o ambiente de homologacao
(SENDER)
<?xml version="1.0" encoding="utf-8"?><n0:nfeStatusServicoNF xmlns:n0="http://sap.com/xi/NFE/005a" xmlns:prx="urn:sap.com:proxy:PID:/1SAI/TASE95D30ADB76F1544C2D5:700:2009/02/10" xmlns:n1="http://www.portalfiscal.inf.br/nfe"><n0:cUF>35</n0:cUF><n0:tpEmis>1</n0:tpEmis><n0:tpAmb>2</n0:tpAmb><n0:nfeCabecMsg><n1:cabecMsg versao="1.02"><n1:versaoDados>1.07</n1:versaoDados></n1:cabecMsg></n0:nfeCabecMsg><n0:nfeDadosMsg><n1:consStatServ versao="1.07"><n1:tpAmb>2</n1:tpAmb><n1:cUF>35</n1:cUF><n1:xServ>STATUS</n1:xServ></n1:consStatServ></n0:nfeDadosMsg></n0:nfeStatusServicoNF>
(RECEIVER)
<?xml version="1.0" encoding="UTF-8"?>
<nfeStatusServicoNFResponse xmlns="http://sap.com/xi/NFE/005a"><nfeStatusServicoNFResult><retConsStatServ xmlns="http://www.portalfiscal.inf.br/nfe" versao="1.07"><tpAmb>2</tpAmb><verAplic>SP_NFE_PL_005e</verAplic><cStat>107</cStat><xMotivo>Serviço em Operação</xMotivo><cUF>35</cUF><dhRecbto>2010-05-26T09:37:22</dhRecbto><tMed>1</tMed></retConsStatServ></nfeStatusServicoNFResult></nfeStatusServicoNFResponse>

Error in Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

Hello Everyone,
I am a regular user of I-tunes but recently i dont know why but I got some error in Launching I-tunes. So as recomonded by "Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7" section. I started removing the products. But after removing Quick time, I tried to remove Apple Software Update but while uninstalling it gave error that "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor." and the uninstall rollbacks.
Please send me a feasible solution to this problem.
Thank You.

Uninstalling the iCloud control panel should allow you to do that folder deletion.

Error - "Message Interface does not exist in any software components"

HI
This is an Idoc sender - SOAP receiver scenario.
When I try to create the receiver determination, I get a warning message -
" Message interface does not exist in any software components installed on this business system"
I checked all the usual things & also reimported the IDoc metadata.
Any suggestions are appreciated!
Thanks
Rachana

Hi Rachana !!
You should also check if the given idoc type in mapping is the same that in the WE20.
Also try to reactivate your integration directory objects by making any dummy changes.
Check your receiver business system (I mean XI), that the logical systems are ok.
Check this document (page 31):
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2f2a9fa2-0a01-0010-32ac-d281db722b86
Regards,
Matias.
Message was edited by:
Matias Denker
Message was edited by:
Matias Denker

Message interface not exist in any software components on business system

Hi Experts,
In development-environment we have an interface (SAP->XI->3rd party system) with a conditional receiver determination (based upon a fieldvalue in RFC that comes from SAP, "CONTROL_RECEIPE_DOWNLOAD"). This functions properly in development.
After transport to production environment this structure is not known when I try to use it in the Integration Directory when creating a conditional receiver determination. Double-click on the interface does result in the startup of the integration builder, but the interface itself can not be found. The following error-message appears:
"Error message Message interface does not exist in any software components installed on this business system"
All design-objects have been put into production and in Integration Builder the structure is available. In IR it is not...
In development In the business system of the sending SAP system, I can see the interface. In production, I don't see any interfaces at the business system....so this might be the problem but how can I add an interface manually to a business system?
Can anybody please help?
Thanks in advance
William

Hi William,
One more thing. In Production, check the technical system of source. SWCV in which you have developed your interface, should be installed on the source system. If this SWCV is not in list of your installed products & SWCV then add it. Update the business sytem in ID again & it will work. I guess you have done a typo by saying that objects are not available in IR but in Integration builder its avaliable.
Regards
Sushil

Software Components for XI in SLD.

I'm starting with my first project in XI, and I have the following doubts.
The SAP ERP systems are loaded as Technical Systems into the SLD with their products and software components, which are contents of Content Repository of the SLD. If, for example, I have to develop a scenario in XI to integrate my SAP ERP system with a legacy system, if I create a new Software Component version to create the XI design objects I need for the SAP ERP side, should I create and assign a new Product version with this SWCV to my SAP ERP Technical System, or I could use it without doing that, and make the connection with the system directly in the Integration Directory?
If anyone has information or tutorials about best practices for creating Products and Software Components depending on the scenario to develop in XI, that would be a lot of help for me.
Thanks in advance
Sebastian Pereira.

Sebastian,
-->if I create a new Software Component version to create the XI design objects I need for the SAP ERP side, should I create and assign a new Product version with this SWCV to my SAP ERP Technical System, or I could use it without doing that, and make the connection with the system directly in the Integration Directory?
Yep you can ...Software component takes part only in design time...at configuration time You need to import the Business system in Integration Directory..
Configuration time activity:
1. Create Technical and Business systems in SLD( Business system should be associated with this Technical system only)
2. Now import Business System from tool menu item of ID
3. Right lick and Create a scenario in ID
5. Under this scenario you can see the configuration objects you need to configure an create..these objects
PS : Don't forget to activate the objects in ID
Let me know if you want further clarification of thoughts..
Regards,

Software components can keep modifiable in bw 3.5 system change options

hello experts,
can we keep software components modifiable in bw 3.5 production in system change option (se06)
it very urgent

Hi
Transaction SE06 - Processing After Installation of the CTO
Transaction SE06 has to be executed once in every newly installed R/3 System. This applies to an R/3 standard installation as well as the installation of a copy of an existing R/3 system.
Transaction SE06 provides the following functions for processing after installation:
Generating basic settings of the Change and Transport Organizer Closing other requests and tasks Setting the system change option
Meaning of the system name The system name (SID) is defined during the installation with R3setup and cannot be changed subsequently.
When you choose names, make sure that there are no naming conflicts with existing systems. Under no circumstances may two systems within an SAP system group have the same name.
The installation type of the R/3 System is specified in the initial screen:
R/3 standard installation
The R/3 System was installed from the SAP CD using R3setup. It is assumed that the system is running on a correct, delivered version of the R/3 System. No adjustments based on corrections or repairs have been made.
If you set up an R/3 System that originated from a database copy using this option, problems could arise when you upgrade or modify objects with the Change and Transport Organizer.
Database copy or database migration
The R/3 System was created on the basis of a copy. R3setup provides utilities to do this. The R/3 System needs to be assigned a new and independent role within the SAP system group or outside of it.
Before you connect the new R/3 System to the SAP system group, you have to give it a name that has not yet been used in the group.
You should avoid using a previously used system name as this could cause serious complications and may also lead to the loss of information.
If you have installed your SAP System as a copy of an existing SAP System then you must configure the CTS after installation.
In SAP Systems installed with R3setup from the SAP CD the basic settings for the CTS are generated during the configuration of the Transport Management System. You do not need to perform any processing after installation.
Transaction SE06 provides the following functions for processing after installation:
Generating basic settings of the Change and Transport System
Setting the system change option
Closing foreign requests and tasks
You must specify the installation type of the SAP System on the initial screen:
Standard installation
The SAP System was installed from the SAP CD using R3setup. It is assumed that the SAP System is running as a correct, delivered version. No adjustments based on corrections or repairs have been made.
If you set up an SAP System that originated from a database copy using this option, problems could arise when you upgrade the system or modify objects with the Transport Organizer.
Database copy or database migration
The SAP System was created on the basis of a copy. R3setup provides utilities to do this. The SAP System needs to be assigned a new and independent role within the SAP system group or outside of it.
Before you connect the new SAP System to the SAP system group, you have to give it a name that has not yet been used in the group.
Do not use an existing system name since this could cause serious conflicts and may lead to the loss of data.

How to Create Software components , Technical systems , Business Systems

Hi,
How to Create Software components , Technical systems , Business Systems and Logical Systems
and Link between them. foe different adapters.
Ponts will be awarded..
Regards,
Jayasimha Jangam.

Steps to create software component,
1. Goto SLD --> Software catalog
2.select new product
3.Fill the Vendor, Name , version and choose create
4.now go back to the SLD main page and then choose software type as sofware component
5. select new component and in the next page select your product which you have created in the previous step
6.then give your vendor, name and version and choose create
7. now the sofware component is created, you can import the same in you integration repository for your scenario
Go through the following link which gives you a clear idea about technical, business systems,
http://help.sap.com/saphelp_nw04s/helpdata/en/24/8fa93e08503614e10000000a114084/frameset.htm

Products and software components not found in SLD?

Hello All,
I am trying to configure SLD for Retail (POS -XI Integration )Scenario using "SAP Business Package for Store Connectivity POS Integration
I am trying a create a third party system for POS in SLD and i am trying to assign products and software components (GM STORE CONNECTIVITY and STORE CONNECTIVITY)for this system.
But i amot able to find the products and software components in the SLD.
SAP (GM) POS system:
Product (one of the following)
SAP TRANSACTIONWARE GM 9.5
SAP POS 1.0
SAP POS 2.0
Software Component Version (all of the following)
XI CONTENT STORE CONNECT 2.0
XI CONTENT GM STORECONNECT 1.0.
what may be the reason?
Thanks and best regards,
Anil

Hello All,
I am trying to configure SLD for Retail (POS -XI Integration )Scenario using "SAP Business Package for Store Connectivity POS Integration
I am trying a create a third party system for POS in SLD and i am trying to assign products and software components (GM STORE CONNECTIVITY and STORE CONNECTIVITY)for this system.
But i am not able to find the products and software components in the SLD.
SAP (GM) POS system:
Product (one of the following)
SAP TRANSACTIONWARE GM 9.5
SAP POS 1.0
SAP POS 2.0
Software Component Version (all of the following)
XI CONTENT STORE CONNECT 2.0
XI CONTENT GM STORECONNECT 1.0.
what may be the reason?
Thanks and best regards,
Anil

Packages and software components

Hi everyone:
I'am having problem with an interface going to my XI-system. This interface works OK in another XI-system, because of that I think the problem are the packages or the software components installed in my XI-system.
Can somebody tell me if this two configuration are compatible?the levels(010,009...) are importants????
My XI-system patches:
__________________My XI______________________________
SAP_BASIS     640          0010     SAPKB64010     SAP Basis Component
SAP_ABA          640          0009     SAPKA64009     Cross-Application Component
PI_BASIS     2004_1_640     0006     SAPKIPYI66     Basis Plug-In (PI_BASIS) 2004_1_640
SAP_BW          350          0009     SAPKW35009     Business Information Warehouse
______________The another one XI________________________
SAP_ABA          640          0015     SAPKA64015     Anwendungsübergreifende Komponent
SAP_BASIS     640          0015     SAPKB64015     SAP Basiskomponente
PI_BASIS     2004_1_640     0010     SAPKIPYI66     Basis Plug-In (PI_BASIS) 2004_1_640
SAP_BW          350          0000         -         Business Information Warehouse
Thanks

Hi:
The error in the sm21 is the following:
<b>Transaction cancelled IDOC_ADAPTER 601 (SAPGET 100)</b>
      in details I can see this:
<b>No sevice for system SAPGET, client 100 in Integration directory. No documentation exist for message ID601.</b>
    In The sld and in the integration diretory is created this bussiness system.

Move Software components

Similar Messages

Maybe you are looking for