Movement scenario for STO process

Hi,
I am trying to do an STO process in TSW, can you please explain the step by step  process for the same. What movement scenarios will be used here. I have checked that mvt scenario 15 & 16 are available, do i have to use both of these ?

Hi Srinivas,
S1: Based on your configuration you can create shipment cost document either after finishing loading or after finishing delivery. In case of TSW, either after the first line/leg is actualized or after the last line/leg actualized.
Depending on how you set up the shipment cost pricing procedure, you can add cost to inventory.
S2: No. All standard TSW transfer movements are with shipment document (O4F1), you need to create your own customized movement scenario to avoid one, you may copy the "Book Transfer" scenarios to do so.
For scenario 2 & 4 also you can create shipment cost document if your voyages are non-complex. And hence add cost to inventory.
Cheers,
Anubhav

Similar Messages

  • Choose the Inbound delivery type for STO process

    Hey guys,
    I am struggling with this process.
    For STO process we are going to use SPED output type to create the Inbound delivery automatically after O/B delivery PGI.
    The thing is I do not want the I/B Delivery type to be EL. Cause we are using HUM. I want it to be HID.
    I can't find where in config I can't set up the system to choose HID rather than EL.
    Does anyone have an idea?
    Cheers Guys

    Hi,
    Thanks for your answer. But  what you are describing is more for PO (external purchase) not STO.
    What I want is to control the I/B delivery type that get created after PGI of the O/B delivery via the output type SPED (special function).
    Cheers
    Julien

  • Freight capitalization for STO process using shipment cost document

    Dear MM experts
    I have been testing and trying to charge freight to material using transportation module. I know how to do it in simple STO process without SCD (shipment cost document) but I am not able to do it with SCD.
    I have searched and tried every link I found on SCN. Unfortunately there are many open threads and non of them is answered or giving complete solution. For example I have tried this link where Ajit Kumar has explained the scenario in detail I am but unable to achieve my result. I have also tried other links and SAP note 427944 as well.
    Now what thing confusing me is accounting entries and documents/steps where these accounting entries will be posted.
    My current process is like this in plant to plant transfer under same company code
    STO > OBD > Shipment Document > PGI > Accouting Entry with 641 movement type. Material account debit and same account credit. > Shipment Cost document > GR with 101 without any accounting entry > Transfer freight cost to FI using Freight Service PO determination > Accounting Entry Freight Outward Expense Debit and Freight Clearing Account Credit > MIRO > Accounting Entry Freight Clearing Debit and Vendor Credit
    As you can see we are booking freight as an expense and not charging to material. Now what I want is that freight should be charged to material. If I am sending material from plant P000 to plant P201 under same comapny code then freight charges should be added in material cost in plant P201.
    I have done FRB1 condition type with accrual and copy shipment cost tick mark and other stuff suggested in all those threads but it is not working.
    My requirement is to understand the points where and what accounting entries will be created as per my new scenario which is same as old one except one difference which is to charge freight to material instead of booking expense in freight service PO.
    Lets take an example that material cost price is 100 and freight charges is 50. Now as per old threads at the time of GR against OBD system will create accounting document with 150 debiting the stock in plant P201. What about credit? If we have added freight here then what about 2nd accounting entry in my first scenario in which freight expense is debited and clearing account is credited? Could anyone please explain accounting entries and points where these entries will be posted?
    Another thing is that is it only possible with moving average price to charge freight to material or can we do this with standard price as well using some standard or customized solution?
    Detailed and easy to understand answer will be highly appreciated.
    Thank$

    Hi Moazzam ;
    Firstly, you can benefit Badi/s in package VTRA which is given belowed.
    Secondly , i think that  shipping method --> create sto with delivery --> create shipment document and shipment cost document (problem is starting so system will be create PO and service entry sheet automatically , can you try shipment document is non-related with cost document.
    Thirdly , you can post invoices charge to material with miro , if you success to direct freight costs to stock account (BSX).
    Also , you can benefit doc. sap behaviours for Std price/ Map --> Planned & unplanned delivery costs in mm
    I hope , you can manage your process ; for me standart way is the best.
    Regards.
    M.Ozgur Unal

  • Not able to cancel the Excise invoice for STO process

    Hi All,
    In  STO process, we need to cancel the excise invoice due to some business requirement. When we tried to do the same in J1IH, it is not allowing us to do the same with the error "No item information transferred into Accounting". Tried the same through J1IS with the internal Doc No. Here the error is document is complete.
    Please guide how to cancel the same.

    Hi,
    STO has been created either through MM route or through SD-MM route.
    In MM route, the process is as below,
    You create PO, followed by MB1B (Transfer posting) , then followed by J1IS (Excise Invoice).
    In SD-MM route the process is as below,
    You create PO, followed by VL10B , then VF01, then followed by J1IIN (Excise Invoice from Factory).
    Normally, when you create Excise Invoice through J1IIN, it is automatically released to Accounting.
    In your case, I feel it has not yet been released to accounting and I hope, Excise Invoice has been created through J1IS.
    In MM route, you need to release the Excise doc to Accounting.
    In that case, you need to go for J1IV and release the same to accounting.
    Find out the Internal document number from the Excise Invoice and with the reference of this Internal document number release it to Accounting through t.code J1IV.
    Now, once it is released to accounting, you should be able to cancel it through J1IH or J1IS.
    Please let me know if any further problem you are facing.
    Regards
    Pradyumna

  • ISR Scenario & Form Scenario for HR Processes[PCR].....

    Hello All,
    I am working on Interactive Adobe Forms for HR Process [PCR] in ECC 6.0 Where Application Type is 'H' ie.HCM Processes & Forms. Thing is When you have application type as 'H' It wont give u BADI implementation TAB on Form Scenario screen there is different method & sequence of all things.
    In SPRO There are so many thing for this...
    Create Form Scenario then ISR Scenario , Link Form Scenario to ISR Scenario,
    Creating Gerneric Services ETC....There is one transaction for BADI for generic services...
    I am really confused with all these...Anybody worked on HR Processes Forms & processes in ECC 6 ...Pls help me understand Floe of Steps for Form creatio & how to write BADI's & Test Form.????
    Awaiting Reply!
    Thanks,
    Smita

    Hi,
    Can any one send the link for developing ISR Forms in ECC6.0. I couldnt find it in Service Market place either.
    I mean specifically for the above said scenarios (above post).
    Also, i see WebDynpro components related to ISR like QISR_UI. please explain how they all are integrated. Any document in this regard will be helpful.
    Hi Smitha,
    You may check out the transactions PE51 and HR Forms, I am not sure if you can develop interactive forms through it, but i have developed print forms from HRFORMS transaction 1 year back..
    Thanks andRegards,
    Anto.

  • Mark up price for STO

    Hi Guru's
    Can anybody tell me the mark up price procedure for STO?
    My scenario is we are transfering one material from Plant A to Plant B. In plant Price of matieral is 100 Rs but i want to do the STO at the 120 Rs to Plant B, we are not using SD route. Whether we can mark up price to do this if yes then how to do it?
    Regards
    Ramakant

    Hi,
    Assign the pricing procedure for the plant for STO process. than enter the basic price as 120 in sto po. and transfer the material .
    Hope this will help u

  • In STO process , PGI to be made mandatory

    I wish to make PGI mandatory for STO process..Steps are as follows:
    -Create PO.-.ME23n
    -Create Replenishment Delvery -VL10B
    -Do PGI -.VL02n>PGI
    -Create Proforma Invoice-VF01
    -Create Excise -J1iin
    In order to achieve that , in VTFL copy control  for  NL to F8 , I changed Copying Req ( at header) to 003 from 009.
    But somehow I am not able to create proforma invoice VF01 ...even after doing PGI.
    Message is that there is no delivery related items.

    Hi Ramesh
    In copy control VTFL for NL->F8, I made the copying requirement at header as '003' ( replacing 009 as was the original).
    -Also,as per earlier suggestion, I changed the Copying requirement at Item level ..i.e for NLN to 034 ( replacing 010 as was original).
    Next I ran the cycle
    a) Created a PO. ..ME21n
    b) Created replenishment delivery .VL10B
    c)Picked the Delivery Quantity ..VL02n
    d) Tried ..Generating Proforma invoice .of .type F8 .in  VF01 . It didn't allow.
    This was fine and satisfy my requirement of not being allowed to do invoicing before PGI.
    Next ....
    e) Did PGI for that delivery.
    f) Tried to generate proforma invoice ..type F8 . But the system is not allowing me to do so.
    Processing status-Incorrect.
    Error log..The document is not relevant for invoicing.
    What is the way out?
    (As a fyi..without the changes I did  in copy control, I was able to generate Proforma invoice after PGI.earlier)

  • Mapping Scenario for Retail Industry

    Hi,
    I  want to know how to implement the following scenario for Sales Process
    My customer is into retail industry. They have franchisee all over india. They buy material and supply material to all the location. (Which I mapped through Document Series and Sequence).
    For Sales these people only know the closing stock from the respective franchisee i.e balance of the stock. right now they follow (Opening Stk - Closing stock = Sale Quantity) to get the sales.
    How can we map the above mentioned scenario in SAP B1.
    We are using SAP B12005B PL 40
    Regards
    Shashi

    Hi,
    Thanks for the reply. But actually what I am looking at the creation of A/R invoice, as it is not possible to enter item codes and select warehouses for branch for each row. I need some automised solution. so that when user from specific branch logsin that should show only the warehouse for that location. and items list should show which are there in the that particular warehouse.
    Regard
    Shashi

  • CIN FOR STO

    Hi,
    can anyone tell me, is there any settings for sto process in cin.. pls provide me the full detailed

    Hi,
    Excise master data  : In J1ID see the material data is entered for both the plants.
    Process:
    In ME21N, check the item tab invoice and see the tax juridiction code as IN00, save it.
    Do the Transfer posting in MB1B, note hte mat doc number
    Creation of excise invoices: Create Excise invoice for other Mts in J1IS, select the doc type as MATD.
    check that systel automatically creates the invoice.
    Note the Excise invoice number
    Posting of Excise Invoice
    T code is J1IV. save it
    Now the material reached the 2nd plant.
    The activities at the plant are'
    Capturing of Excise invoices: Its an ordinary J1IEX transaction.
    Capture the invoice against STO.See the plant 2 is automatically apperaed.
    save.
    GR: It is done in MIGO.
    Enter the Excise invoice details save it.
    Posting the Excise Invoice:  J1IED transaction.
    Select the tab as posting against vendor excise invoice.
    Input the details.
    Click on simulate CENVAT and check the postings.
    If its ok post it.
    Regards
    KK

  • Different movement types for store Physical Count process

    Hi Experts
    Would like to ask for your advice in terms of using different movement types for physical inventory process.
    The scenario is like this:
    1) Our client uses different counting processes for store inventory, with both annual full stock take AND spontaneous ad-hoc counting which is more frequent and involve probably around 30 articles a week.
    2) Both types of counting involve count result interface from a 3rd party POS system
    3) Since it is count result interface, we are considering the standard PI process (MI01, MI04, MI07, MI31, MI20, etcetc)
    4) However the standard movement type is 701/702 while our client request a different financial posting, hence different movement types, for the ad-hoc counting
    So the question is very simple: Is there a way for SAP to determine using 701/702 when it is a full stock take, while using another set of Z-movement types when it is a ad-hoc count. Bare in mind that both information are the count result, not a variance adjustment, from external POS system.
    Appreciate very much for your help!
    BR
    Dom

    System determine 701/702 in the IMS . refer t code OBYC - Trans GBB-  gen modfier INV - GL Account assignment.
    regards
    manu

  • Creation of Inbound delivery mandatory for ASN process in classic scenario?

    Dear Experts,
    We are going for classic scenario for our green field SRM implementation process. Our client is not using  ASN process in their existing MM process. However, they are now looking for an oppurtunity to enable Suppliers to trigger ASN using SUS. In such case, is creation of inbound delivery from Buyer side a mandatory process?
    Is the below the process correct?
    PO -> ASN (Supplier using SUS) -> Inbound delivery (Optional) -> Goods Receipt (Mandatory) -> Invoicing.
    Here, I understand that Goods receipt can be verified against the PO or via Inbound delivery to PO. ASN will inform the store keeper in advance about impending goods receipt and smoothen the confirmation process.
    Could you please comment on the above process? Could you please suggest the best practices followed here?
    Thanks and regards,
    Ranjan
    Ranjan Sutradhar

    Hey Ranjan!,
    You are on track.
    The process flow you have shown is true. ASN is available as a standard as part of the MM-SUS process. It makes the buyer aware of any delays in delivery or to make arrangements on shipping docks to receive goods on a said date etc.
    Regards,
    Nikhil

  • Restricting for creating the Billing Document without PGI in STO Process

    We want to restrict creating the Billing Document  without PGI in STO Process
    Delivery Type:NL
    Item cataogory:NLN
    Billing Type: JEX Profroma Invoice
    I have check in VTFL
    At Header Level, Routine - 003.  for normal sales process LF-F2
    At Item Level , Routine  - 004
    in VTFL-- NL-JEX
    At Header Level, Routine - 009. 
    At Item Level , Routine  - 010. here when i changed to 003 and 004 for NL and JEX
    i am getting error after PGI when i am doing vf01 error is coming " document is not relevant for Billing"

    Hi
    Kindly do the belwo
    1. goto the t code VOV7 item category determination and select the item category and put  the billing relevance as "A"
    2. once the step 1 is completed then it will show the billing relevant status AS "A"in the delivery documnt at the item level
    The above configuration  will be applicable in the new documents only
    Regards
    Damu

  • Maintain vendor for excise invoice -STO process??

    Hi,
    Still facing problem in Same issue so...
    I am doing Stock transfer from plant to plant in same company code.
    i have maintain all the information in the Excise TAB of migo but still face the following errors.
    Error is "Maintain Vendor for the excise invoice. (Message No 4F185) ...????"
    In STO process, vendor it won't come in the picture ??Becas , once we create purchase order with UB document type , it 'll ask for only supplying plant  not for vendor .
    So what might be the problem and how to locate  it , trouble shoot the same .???
    Thanks in advance
    SAP-MM

    hi
    check following
    goto Xk02
    give ur vendor ( plant assigned to)
    then goto PURCHASING TAB
    here in menu EXTRAS>ADD URCHASING DATA
    here u can find field for plant
    just check and revert back
    regards
    kunal

  • In STO process, am getting error in GR"Maintain vendor for Excise invoice "

    Hello
    In STO process(MM route) I have prepared excise invoice by J1IS. While preparation of  J1IS i have enterd customer(recieving plant as customer).I have also mainatin the the supplying plant as vendor in J1ID. But when i am trying to capture the excise invoice at recieving plant during GR am getting error "Maintain vendor for Excise invoice "
    Kindly suggest
    Regards
    Manish

    dear sir
    please check in customer master record , in control Data tab, vendor master assigned .
    if not assigned the vendor master in customer master.
    regards
    jrp

  • Error BOP run for STO in SCM2007 - ECC scenario

    Hi,
    We are taking BOP run for STO in SCM 2007 environment. The BOP results are showing correct dates as per the availability at supplying plant. But this date is not getting updated in product view (we are running BOP in update mode and not simulation mode). Have you faced this issue?
    Best regards,
    Vaibhav

    Any ideas on this?
    In the transfer order scenario, we want the system automatically generate inbound DN for the receiver plant after the outbound DN is posted for the sender plant. Can we implement this function in R3 system?

Maybe you are looking for