MP640 scanner navigator driver problehmo - please help me PAHU

Hi ( Pahu are you there?),
I recently added more memory to my MacBook Pro. When I next went to scan some docs using the MP Navigator, I got the message the drivers are not installed. I have reinstalled the the Canon Pixma MP640 CD Rom, and the driver here http://support.apple.com/kb/DL899 . ( Should I have shut down and re-opened?)
Please note I am wishing to continue my wireless use of the scanner. PS: Printing is working fine. Just can't open the scanner navigator. Happy to use an alternate scanner navigator.
Thanks in advance for your help.
GT

Hello again Gypsy Tia. Seems odd that adding memory caused you this trouble but if computers always did what they are supposed to do then I would be out of a job
To use MP Navigator you need the TWAIN scanner driver installed. The scanner driver included with the Canon Update provided via Apple Software Update contains an ICA driver, which works fine with Image Capture and Preview but not with MP Navigator. And as for the included CD, the driver was probably for 10.5, not 10.6.
So the driver you need is this v15.5.2. With this driver installed the scanner can be configured via the Preferences section of the MP Navigator.
Hope this gets you scanning again. Reply if you still need help.

Similar Messages

My internal hard drive isn't being recognized on my macbook pro but when I put the HD in my Mac Pro (desktop), the desktop computer recognizes the HD. When I insert the installer CD on my laptop, it also doesn't recognize my hard drive. Please help!

My internal hard drive isn't being recognized on my macbook pro but when I put the HD in my Mac Pro (desktop), the desktop computer recognizes the HD. When I insert the installer CD on my laptop, it also doesn't recognize my hard drive. Please help! Thank you!
I've also been getting an image with the folder and question mark. I've tried everything on the apple support page but it doesn't seem to work either.

Well, I tried all of your suggestions and they didn't work -- no surprise because I was trying to backup to my external c.d. disk. Duh! The application for the home is in the mail.

My PC computer was wiped (virus) including itunes. How do I transfer the many playlists and music to the new re-installed itunes?? Ipod is synced to old itunes. I have all original music files on external hard drive. Please help?

My PC computer was wiped (virus) including itunes. How do I transfer the many playlists and music on my ipod to the new re-installed itunes?? Ipod is synced to old itunes. I have all original music files on external hard drive. Please help?
New itunes is trying to wipe the ipod. But have many many playlists (many hours making) which I want to save. Any help would be appreciated.

If you want to just extract the playlists from your iPod, plug it in iTunes. When it appears under devices, right->click on it and choose Export Playlists. Save them to a location such as your desktop and them import them into your library once you have copied and imported all of your music back into it.
See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

My hard disk crashed and I cannot find out how to "contact customer service" other than this forum. The website seems to just take me in a circle. I need to de-activate a license but cannot access the software due to a crashed hard drive. Please help.

My hard disk crashed and I cannot find out how to "contact customer service" other than this forum. The website seems to just take me in a circle. I need to de-activate a license but cannot access the software due to a crashed hard drive. Please help.

Hi Anthony ,
Here is the link to connect with Adobe Chat Support.
https://helpx.adobe.com/adobe-connect/kb/connect-chat-support.html
Hope your query gets resolved .
Regards
Sukrit Dhingra

I AM LOOKING FOR ADVANTEST R3271 LABVIEW6.1 DRIVER(GPIB),PLEASE HELP ME. THANKS.

I AM LOOKING FOR ADVANTEST R3271 LABVIEW6.1 DRIVER(GPIB),PLEASE HELP ME. THANKS.

Hi,
I am not sure what the R3271 is, but we have a driver for the R3272 (Spectrum Analyzer with GSM option). Normally API's do not change significantly and so it is very likely that you will be able to use this driver for your application. You can get it by going to www.ni.com/idnet. The easiest way to get the the page is just to seach by vendor.
Hope this helps out.
Aaron K.
Application Engineer
National Instruments

When I try to create pdf from scanner, Acrobat shuts down, please help!!

When I try to create pdf from scanner, Acrobat shuts down, please help!!

Hi miketayber,
We would love to help, but need to know a bit more to get to the root of the problem. Please tell us:
What version of Acrobat are you using
What operating system you're on
Whether you've been able to scan previously
What you're scanning to (do you have the latest drivers?)
Is there an error message or number associated with the crash?
We look forward to hearing back from you.
Best,
Sara

My ipod touch gets stuck on the same song, even after I uncheck the loop button. I am trying to play it in my 2007 vw with a power adapter that allows it to charge and play through my navigation unit. Please help. Thank you.

My ipod touch gets stuck on the same song, even after I uncheck the loop button. I am trying to play it in my 2007 vw with a power adapter that allows it to charge and play through my navigation unit. Please help. Thank you.

Yes, first try deleing both songs.
If still problem
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, ,make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

HT5958 We are 4 min in to editing a video on final cut pro. now my computer is freezing up. I have heard that this is a glitch from downloading. (beyond frustrated) is this from working from 2 external hard drives? PLEASE HELP! =)

PLEASE HELP. =)
we are about 4 minutes into editing a video for the first time on final cut pro x 10.1. everything was going very smoothly, but then it started freezing up. I had to do a hard reset and took it into the computer store that actually installed final cut for us. they suggested that our mac actually is not capable of keeping up with final cut. (I FIND THIS HARD TO BELIEVE!!) We work on an IMAC 2.66 ghz intel core 2 duo. 8 gb 1067 mhz ddr3. software os x 10.9.1 (hopefully that info will help for your suggestions) Because we have soooooooooooo many hours of high def video, we are working off of two external hard drives.... is this a problem?? or do we really need to upgrade our computer?????

Like Russ said, check Activity Monitor and see what else is running and turn off any Applications that aren't needed.
Turn off wi-fi or disconnect the wire that goes to the Internet
Turn off Background Rendering (if you see an orange line on the top of the time line that moves along and gets shorter while you're not doing anything that is a good sign that Background Rendering is running.
I haven't used 10.1 yest but on the previous version there was a small circle approximately in the middle of the screen, about 1/2-inch or 1 cm in diameter, and it would have a number inside. The number is the percent complete of what is hapening. When it is Rendering the percentage will be shown.
Basically, you probably need to free up resources.
For what it is worth, my previous Mac Pro was a 1,1 2.66 machine, also with 8GB of, I think, 667 memory, and it would process FCPX 10.0.9 okay. It did have an upgraded video card, though.

Macbook Pro Hard Drive Problem - Please Help

My macbook pro had a hard drive failure so I went out and bought a new hard drive and got it to work with the Mac OS, although 2 days later it crashed and now it is not being found when I use the disk utility (Cmd-R), I even ran a hardware test and showed no trouble found.
Should I return this hard drive and get another?
Or is there another problem that is occuring?
I have a Macbook Pro (mid 2012)
Thank You.

I just installed a new ribbon cable for the hard drive...Now I get a new error that is popping a message saying "2003-f", this happens when I try to go to the online recovery (CMD-R). I tried two different hard drives and still won't let me get to the utility.
Someone please help, my mini semester classes have started for my University, and I am stuck with no laptop.
Thank You.

G4 Powerbook Hard Drive Problem - PLEASE HELP!!

I have a powerbook G4 15 inch alu. It is running OSX version 10.4.11
My system profiler tells me I have a 74.5GB hard drive with 69.34GB used, but I had wiped the HD in September 2008 and reinstalled the OS and few other programmes and files, so this shouldn't be the case at all.
I have found that my the problem is with my Users folder - within Users, my user account (the main account, I have another account setup so my mum can use her iPhone) has 67GB used. But when I go into my user account (clicking through the icons, after double-clicking the MacintoshHD desktop icon), none of the folders within my account run to anwhere near 67GB. Totalled, they come to around 10-15GB at most. There's a good 50GB or so of hard drive that just seems to be missing.
I ran Drive Genius to repair permissions and that eliminated a couple of GB of this 'missing space' but no more than that. How can I go about finding and reaccessing my lost hard drive space?
FWIW - I reinstalled the OS in September because this was my University laptop and the result of 4-5 years use had resulted in loads of unwanted files. I saved the important stuff to discs and then reinstalled because it was much easier (I thought) than trying to find and get rid of all the unwanted stuff.
Please please help. At the moment, the computer is running fine if a little sluggishly (understandable given how much of the hard drive is 'used'), but I had a nasty experience earlier this year with my G5's hard drive crapping ut and really don't want to end up in the same boat with this one. I also need that extra space back so I can use some programmes I can't install or work with as things stand.
Many thanks for taking the time to read this and respond, I don't know enough about computers to have any clue as to how to proceed, so your help in this matter would be greatly appreciated.

eww - will do and report back.
cornelius - apologies for the ambiguity there. Hope this clears things up a bit:
Users folder = get info says 69.34GB used
Double-click on the Users folder and I get three folders - the shared folder, my mum's account folder, and my account folder. My account is the main/master account.
The shared folder is empty. My mum's account folder has a couple GB used, mine has 66.5GB used.
I double-click on my account folder, and get icons/folders for Desktop, Library, Movies, etc (the usual stuff). When I do Get Info for each of these, the sum of GB used by them is about 10-15GB, nowhere near the 66GB supposedly used.
If it helps any, the File System is Journalled HFS+
S.M.A.R.T. status is verified, and Drive Genius, Disk Warrior, and Disk Utility aren't picking up anything bad other than the corrupted permissions I repaired prior to making this post. Repairing permissions only freed up a few GB more space, still got 50 missing GB to locate and free up. Or start saving for a replacement HD, but if this is a sign of a crash, I'd rather know now so I can plan for that.
Many thanks to both of you for responding so quickly - hopefully this problem is solvable.
It doesn't make sense, there's nothing else which could have used those 'missing' GB. And, as I only reinstalled everything in September I know there's no way the few programmes I've added and 10 or so CDs I've copied onto the G4 could account for the missing 50GB. My HD should have most of its space free - minus the space used by OSX, any OSX updates, and literally a handful of small apps and files.

How to use bootcamp in mackbook air with out Disk drive..please help

Please help me how to install windows 8 using boot camp with cd drive to install on patition mac HDD

It is almost 99.9% in the FAQ and How To on the support page and inside Boot Camp Assistant instructions (and pdf)
http://www.apple.com/support/bootcamp
Walks you through how to use USB flash devices

Solaris 9 installation "misleads" into mount drives-error -- please help -

hi out there - masters of the using of Solaris 9 ...
whenever I try to install the program onto any harddisk after loading drivers the installation program tells me that not even one of the harddisks can be mounted ... well I have 3 harddisks & 1 combo-drive with Windows Millenium on C: Windows XP Home on the first and second harddisk + smaller disk for pagefile.sys on the second IDE
- there is just one error message at the beginning of loading drivers (one system device is being added twice -- controller or something as I can remember - once as a Non-acpi and secondly as ACPI-device - but I could change nothing here)
- please help -- I would be very glad if you would help me install from my 4 Cd-roms
thanks in advance

Try to boot from the "Software 1 of 2" CD, not the "Installation" CD.
Maybe the good old installation method works better on your system than the new webstart installer.

I have updated my software on my Mac to OS X v 10.9.5 and now my mac doesnt read any external hard drives? please help

HI, I updated my software of my Mac Pro to OS X v 10.9.5, after I installed it, my MAC doesn't read any external hard drives. Not sure what to do now. Please help? Is there a way of updated drivers

I have no idea where to change that
Finder/Preferences/Sidebar and General for the Desktop.
Do they show in Disk Utility?

Locked JDBC Driver? Please Help

Hi All,
I am using SJSAS 8.1 and DB2 EXPRESS COMMUNITY Edition on a Fedora Machine.
I have set the connection pool in the Admin GUI of SJSAS for DataSource class com.sun.sql.jdbcx.db2.DB2DataSource.
Checked the Connection Pool using Ping. Ping succeeds.
Now I made a JDBC entry in the SJSAS using Admin GUI ie /jdbc/mydbds
I have written a simple JSP
InitialContext ctx = new InitialContext();
DataSource ds = (DataSource)ctx.lookup("java:comp/env/jdbc/mydbds");
try {
Connection con = ds.getConnection();
Statement stmt=con.createStatement();
ResultSet rs = stmt.executeQuery("SELECT * FROM tbl_user");
while(rs.next()){
out.println(rs.getString("firstname"));
out.println(rs.getString("lastname"));
out.println(rs.getString("userid"));
out.println("<hr>");
rs.close();
stmt.close();
con.close();
catch(SQLException e){
out.println(e.getMessage());
e.printStackTrace();
However when i run the jsp then I get the following error
[sunm][DB2 JDBC Driver]This driver is locked for use with embedded applications.
Can anybody please help me in resolving this problem. This is seriously frustratting as there are no solutiuons to this problem on google.
Many Thanks
Anand

Sun Studio/Creator are bundled with DataDirect jdbc drivers. Those drivers can only be used within Sun Studio/Creator environments.
You have an option of installing Sun Studio/Creator on your production server and use its bundled appserver as your production server, but it probably wouldn't be able to support many connections.
For a proper production server you either have to get appserver 8.x SE or EE edition or a jdbc driver from a third party(i.e DataDirect or i-net ) and use it with your appserver PE.

[Athlon64] Assigning Drive Letters - Please Help

Ok here is my dilemma ... please help
I just installed another MAXTOR 80GB DIAMOND MAX PLUS 9 SATA HARD DISK onto my computer and completeley formatted.
I partioned the Primary drive into 3 partitions, and kept the Secondary drive as a whole. The problem i am having is rather than the secondary drive assigning itself as drive "F:" (the last drive in the list at number 4) it is assigning as drive "D:" (at number TWO [which i would want partion 2 of the Primary maxtor drive to be!])
Can you please help me and let me know how i would get the primary drive partionts to read C: D: E: and the Secondary drive to read F:
Thanks
awaiting your reply
asmar

right click my computor
manage
disk managememt
now right click the patition and the options there
rename one to x
then change names then rename x
they can never have the same letter
you cannot alter c

MP640 scanner navigator driver problehmo - please help me PAHU

Similar Messages

Maybe you are looking for