MRP generated Automatic PR creation is not trigerring the Workflow.

Dear Experts,
In our Implementation we are using workflow for Purchase Requsition. The release strategy is configured by the functional consutant. For the MRP generated PR the first releasig point is MRP controller and the PR type is Custom type MRP PR. If we create the PR manually with the said PR type the workflow is getting triggered ( checked in SWI1) and sending the E-mail  notification like other types of PR like Invertory and Capex PR.
But while running the MRP, some  PRs of MRP PR type with same releasing point are being created automatically for the material (Raw, Packging) as per the setting of reorder level but these PRs triggering the workflow as it did while creating maually. Please guide / suggest me how I have to trigger the work flow for Automatic MRP generated PR.
Reagrds
Sony

Your query is not clear. Does the workflow initiator is different for the 2 PRs.
Thanks
Arghadip

Similar Messages

  • Automatic TO Creation and Confirm for the 321 Mvt type

    Hello Experts,
    Like to know the customisation invovlved for automatic TO creation and confirmation for the 321 movement type in which QM is activated.
    I have already activated in OMKZ as below
    1.Automatic TO for 321 mvt ytpe
    2.TO item to be confirmed immediately
    3.Propose confirmation
    Table T333 -AUTTA
              T333-SQUIT &
              T333-VQUIT is activated.
    Please let me know any other settings to be performed
    Regards
    Krishna

    Hello Experts,
    I am trying to create the Automatic TO and TO confirmation for the mvt type 321.
    I made the below settings
    I have activated in OMKZ as below
    1.Automatic TO for 321 mvt ytpe   -"A"
    2.TO item to be confirmed immediately  - tick mark
    3.Propose confirmation   - tick mark
    Table T333 -AUTTA
    T333-SQUIT &
    T333-VQUIT is activated.
    I have activated in OMKX as below
    Table T321-TBFKZ Immediate TO Creation with "A"
    T321-TAFKZ TR creation with "X"
    After doing the settings i am not able to see the Posting change number in the Material document created for the mvt type 321.
    Please let me know how to create the Posting chnage notice for the material document and how to convert the Posting change notice to automatic TO and confirmation.
    Thanks & Regards
    Krishna
    Edited by: Hariharan krishna on May 25, 2011 8:01 AM

  • Unable to create rule Error:Function Module does not meet the workflow conv

    Hi Workflow experts,
    Could any one help me with rule creation. Below is my Function Module Interface.
    ""Local Interface:
    *"  TABLES
    *"      AC_CONTAINER STRUCTURE  SWCONT OPTIONAL
    *"      ACTOR_TAB STRUCTURE  SWHACTOR OPTIONAL
    *"  EXCEPTIONS
    *"      NOBODY_FOUND
    The function module test is successful with all required conventions for workflow but while i try to create a rule with the funtion module i get the error "Function Module does not meet the workflow conventions"
    I Also have included the following in FM
    INCLUDE <cntn01>.
    Any suggestions would be helpful. Thanks in Advance,
    Imran

    Hi,
    I am not sure whether the rule accepts the optional flag. Remove the optional flag for the tables parameters and try again. According to the documentation you have implemented the right interface. It might be the issue with the tables parameter being optional.
    Hope this helps,
    Sudhi

  • Real time ROLAP or Automatic molap cubecube does not update the value

    Hello Everyone,
    I am working with Real time Rolap and Automatic MOLAP cube. I had created cube using AdventureWorks DW sample given by Microsoft Tutorial. when i fire insert query, It updates data. It works fine in both the cases after reconnecting in SSMS and SSAS browser.
    But I have a one database table in SQL server with 4 varchar and 10 numeric fields [simple table with one primary key without any relationship with other table]. I tried to create both type of cube from direct database table [selecting varchar fields as
    dimensions and numeric as measures], created partitions, specified server side tracking table. It processes the cube. but when i add rows into this table. It inserts record but does not update in SSAS browser or SSMS browser.
    Please help me what is the problem???
    Thanks in Advance!

    I noticed the same behavior reported by Bob: Not regarding the "process filter" or the "update frequency" selected "CPU Time" column is only updated when details dialog is open. I noticed it just today (which triggered the search here), I wonder if this "feature" has been always present or maybe activity monitor is getting lazy?
    Regards,
    Mauro

  • OAI Event is not reading the workflow queue

    I'm creating the workflow event using iStudio (created automatically by iStudio) with the following information:
    Item Type: OAI Process Bundle: EDWARD
    Internal Name: I_EDWARD_PAATRANSACTION_OAI_V1
    Display Name: Receive Request EDWARD.PAATransaction:IN
    Description: OAI Event
    Event Action: Receive
    Event Filter: oai.edward.paatransaction.oai_v1.receive_request.oai_v1
    Cost: 0.0
    I also create the event subscription for oracle.apps.wf.event.agent.create, oracle.apps.wf.event.event.create, and oracle.apps.wf.event.subscription.create and put the following information:
    System: WFLOWDEV.MAXIMUSBC.CA
    Source Type: External
    Event Filter: oracle.apps.wf.event.subscription.create
    Source Agent: <blank>
    Phase: 1
    Status: Enabled
    Rule Data: Key
    Rule Function: WF_EVENT_FUNCTIONS_PKG.RECEIVE
    Workflow Item Type: EDWARD
    Workflow Process Name: PAATRANSACTION
    Out Agent: <blank>
    To Agent: [email protected]
    Priority: Normal
    Parameters: <blank>
    I can see that the interconnect OAI Hub is putting a message into the WF_IN queue but the event does not dequeue the message and run the process.
    So, I don't know if I'm missing anything here or there is something wrong with my configuration.
    Can anyone help me please?
    Thanks,
    Edward

    Edward,
    I am basing this reply on the OAI build I have on my laptop, which is an Oracle 9iAS Integration build, however I do not think that it has changed since.
    Before you do this, it is always a good idea to add the "OAIHeader" objects to the Common View.
    1. Under "Common Views", expand the "Business Objects" and find your Business Object (e.g. MY_BO)
    2. Under the "Events", expand the "Events" to find your event (e.g. MY_EVENT)
    3. Highlight you event (MY_EVENT), Right-click on your mouse, and choose "Edit". This will bring up the "Edit Event" window.
    4. Choose "Add". This will create a new line.
    The 'Name' will be blank.
    The 'Type' will be "String".
    The 'Owner' will be blank.
    The 'Array' will be blank, and
    The 'Default' will be 'NULL'.
    5. On the 'Type' value ("String"), click on the value "String". This will bring up a pop-up list.
    6. From this list, select "Data Type..."
    7. Now click once anywhere in the "Edit Event" window. This will bring up a "Common Data Types" window.
    8. Scroll down, find and highlight the the name "OAIHeader". Press 'OK'
    9. Now back in the 'Edit Event' window, you will notice that the type is "OAIHeader".
    10. Now give the "Name" (currently still blank) a value. Give it the name "OAIHeader" too.
    11. Press 'OK'
    12. You will now see that the Event now has "OAIHeader" information. Some of these values will be of interest and of use later.
    The actual values for "EventName, EventVersion" etc. will be added to the data of the message at Runtime.
    *** TIP: I always do the above exercise first for every Business Object event I create. Once I've included the 'OAIHeader', I then add all of the actual other message attributes to the message afterwards. ***
    Create Content Based Routing Rules
    In this example, I am going to route a message from a sending DB Adapter (DBAPP1) to the Workflow Adapter (WORKFLOW). Then once the message has been passed to the Workflow, it will be passed to the receiving DB Adapter (DBAPP2).
    1. In iStudio, under the "Design" tab, expand the "Enabling Infrastructure".
    2. Under "Content Based Routing", find your Business Object.
    e.g. MY_BO
    3. Expand the Business Object, and then expand the "Events" to find your event.
    e.g. MY_EVENT
    4. On the Event (MY_EVENT), highlight it, then right mouse click. Choose Edit.
    5. A window will pop-up called "Content Based Routing: MY_EVENT"
    6. Hit the "New" button.
    7. Expand the message structure (MY_EVENT), and find the 'OAIHeader' node.
    8. Expand the "OAIHeader" node, and select (highlight) the "SendingApplication" attribute.
    9. Press 'Next'. This will move you onto the next screen.
    10. From the drop-down list, choose the "==" Operator. Press 'Next'.
    11. Enter a Value in the box. Since my sending application is "DBAPP1", type in "DBAPP1". Press Next.
    12. Since I have completed the "source" CBR rules, check the "Condition Complete" radio button, and Press 'Next'.
    13. Now in the next screen, select "WORKFLOW". Now press 'Finish'.
    Perform the same as above, this time routing the message from the "WORKFLOW" adapter to your receiving adapter (e.g. 'DBAPP2'). If the Workflow message does not have the 'OAIHeader' information in it's structure, once again refer to the above and add it in.
    Once you have completed all of your CBR configuration, use "File > Push Metadata" to send this new message structure and CBR rules to your adapters (DBAPP1, WORKFLOW and DBAPP2).
    HTH,
    Yan

  • Robo 5 generated Help File (CHM) is not displaying the target Help page

    Hi,
    I am using Robo 5. AFter generating the CHM file and linked to the target application, the CHM file is not displaying content for a specific page.
    The concerned topic, for which the CHM is not displaying content, is included in TOC also.
    When the target topic in the TOC is clicked, the CHM file is displaying the following message: Navigation to the webpage was canceled.
    Can anybody tell me why it is happening like that?

    Does it display OK if you open the help independently of the application?
    If it does, then the problem has to be in the call.
    See www.grainge.org for RoboHelp and Authoring tips
    Follow me @petergrainge

  • After generating a .mov, iMovie does not delete the temp files

    When generating a .mov iMovie creates a temp file indicated by a greyed-out icon. It is my understanding that iMovie should delete this temp file when the movie is finally generated. I've been working on a stack of movies lately and I noticed that my available space on the HD was dissappearing at an alarmingly high rate. What is happening for me is that the icon does dissappear, but the file itself remains. I know this 'cuz when I revealed the hidden files I found 1.8 Tb of hidden files sitting on my desktop, each the temp file of a movie I recently generated.
    Any idea what's happening here? When I ran iMovie 6 (?) I didn't see this issue. I'm now on iMovie 11.
    Thanks,
      James

    This seems to have been a problem for a while. My Aperture library is >500GB and I can't store it on the internal drive of my new retina MBP. If I hadn't moved to referenced files already I would have had to do it now.
    When you point iMovie to the drive with the referenced folders you seem to have to use the 'import' option and cannot index the movies in folders lower than the one chosen. I can tolerate the inconvenience of iMovie not being able to use the index of referenced movie files. It's an extra bind that iMovie itself can't index a drive or hierarchy of folders to produce a pick list of video footage.
    One thing I might try is creating a new Aperture library on an external drive and putting all my video files in that. Keeping that as a managed library, I can perhaps take advantage of the Aperture-iMovie link.

  • Item Number in MRP generated PR missing

    Hi all
    I am encountering a little problem in my MRP Run. All of the MRP generated PRs I have do not have the item number in the PRs. This creates a problem in the ABAP report that we are using.
    What causes this and how do I solve it?
    Please help

    Hi Obie,
    Can you just elebarate little more about your problem. Is the item number tab displayed in the PR? If displayed and its blank then apart from OMDV also check PR document type settings with the help of your MM consultant or follow the below mentioned path for it.
    IMG->Materials Management->Purchasing->Purchase Requisition->Define Document Types.
    And if its not displayed in the PR screen then just check the Layout for PR.
    Regards,
    Hiren

  • Workflow is not trigerred from the portal

    Hi all,
    I have a scenario in which the workflow requires to be trigerred through the portal and direct the task to the approver's inbox in extent to sending email notification to the approver, I have developed the custom workflow and i am using the standard rule for getting the approver. all of this is working fine when i test them on R/3 but wheni am integrating the workflow to the portal using a BAPI it is not trigerring the workflow. The first step in my worklflow is to send the email notification  to the approver, if i remove this step then it directs the task to the approver's inbox which is the second step in my workflow.
    Can anyomne please guide me why it is happening.
    Thanks.
    Saurbah Anand.

    Hi,
    You said
    <i>"wheni am integrating the workflow to the portal using a BAPI it is not trigerring the workflow. The first step in my worklflow is to send the email notification to the approver, <b>if i remove this step then it directs the task to the approver's inbox</b> which is the second step in my workflow."</i>
    Do you mean say that it is not working when you put the sendmail step alone? Or is it that the workflow is not triggering at all.
    I assume that you are using a BAPI to create an event which will start this workflow. Now if your workflow is not starting at all then you need to activate the event trace (SWELS) and check whether the event was triggered first (in SWEL). If yes then check for any errors in the receiver connection.
    If your workflow does start and fails at sending mail step then you may need to give some more info. Are you using the standard sendmail step or Are u using a background task. In case if u r using a BG task then it might be creating a dump while triggering from portal (Ex. it might need the Evt_creator user id to determine the approver which is not binded properly from Event<->Workflow<->Task<->Method).
    Also have a look at ST22 for any dumps.
    Thanks,
    Prasath N

  • Problem in MRP generated purchase requisition.

    Hi Friends,
    We have run MRP via MD02 transaction for one material.
    MRP generated purchase requisition created.
    In that MRP generated purchase requisition, under item level in the status tab we are getting below field values is like below.
    Processing status : No edited
    Block ID: Blocked by requester.
    Due to above values we are not able to convert this MRP PR to PO.
    Could you please let us know is there any master setting is cause of this?
    Thanks in advance.
    Regards
    Jegen Mohan

    Hi Friends,
    After debugging MRP programme, we came to know that there is BADI implemented to block the MRP PR's intially and then z programme called for adding secondary materials/services to that MRP PR's.
    After addition of secondary materials/services to MRP PR's,  Status will be unblock automatically then save the PR.
    This is my client specific scenario.
    Thanks & Regards
    Mohan.

  • Help needed for automatic batch creation for by-products(PP-PI)

    Hi,
    In the Goods Recpt tab in transaction COR1, we have a field for creating a batch manually for the header material. On clicking on create, a pop up is generated whch facilitates creation of batch for the header material.
    At this point, if i go to the material list, I would like to see the same batch number ( same as header) written against the BY-Products.
    Essentially, when i create a batch for the header material, it should also create a batch with the same number for the by-product and populate the same in the materials tab.
    One important thing to note here is that when we click on create batch icon, the data is stored in a structure and the batch is actually created only when the process order is saved.
    Please advise if this can be achived by some standard settings in SAP or do we need to change the standard code. If later is the case, please advise about the point where to insert the required code. I have found a user exit at the point where batch numbe is created manually.
    Please advise.

    As per SAP Batch definition Batch is the quantity or partial quantity of a certain material or product that has been produced according to the same recipe, and represents one homogenous, non- reproducible unit with unique specifications. So logically you cannot have same batch number for two materials.
    If you want to find out the relation between batches of header material and by product that is produced during production, you can use Batch Information Cockpit.
    To see batch details in Batch Cockpit (T-code: BMBC), You have activate Batch where used function in IMG using path : Batch management-->Batch Where used list --> make setting for batch where used list.
    Regards,
    Sachin

  • Automatic lot creation based on time Frequency

    Hi,
    For 01 inspection incoming inspection ,
    F or  certified vendors, without inspection , material is getting posted to UUS without lot creation. ( QI info record settings).
    but for this case , business requirement is to get automatic lot creation based on time like 6 months once .
    Automatic lot to be created for this certified vendor on time frequency basis. how to trigger this Lot creation based on time.
    Help.
    VV.

    Hi,
    In std SAP we dont have option of generating Automatic lot creation based on periodic basis. But we can provide some workaround soultion.
    Option 1:
    USe Source Insepction concept. Here Inspection lot will be created for every P.O. Here u can relase P.O line items in QI07 which can sceduled in Job planning on periodic basis. Use Skip inspection lot concept to skip unwanted lots. This has direct relation with Q-Info record.
    Option 2:
    U can generate automatic lot creation based on Stability study concept. Here are the following steps
    Initiate Stablility study
    Create Initial sample
    Perform intial test
    Confirm initail sample
    stability planning
    Define storage condition
    create testing schedule
    store stability sample
    define cycle start
    schedule
    complete stability study.
    Option 3:
    To get Automatic lot creation u can use BAPI QPL1_INSPECTION_LOT_CREATE . When a due date come for inspection,it created a lot of 01 / Z-01 inspection type automatically through QA01( call the program ,enter the inspection lot origin & material,vendor & save). Create Z-T code which has vendor material plant combination.
    Execute the above T-code based on Periodic basis.
    Explore above 3 options and choose best one according to ur requirements.
    Edited by: Lokesh K on Oct 12, 2010 11:27 AM

  • How to configure wokflow for MRP generated  & manually created PR

    Dear Gurus,
    I have to customize SAP workflow for releasing Purchase requisitions. I will be using enhancement M06B0001 for my own role resolution.
    I have some questions regarding workflow
    1)     How to configure workflow for MRP generated & manually created PR?What are the steps? what are the limitations in doing so?
    2)     Since we are facing the problem of insufficient user license ,How to send notifications to NON SAP users?(We have thought of creating a Z table for the same)
    Looking forward to your reply,
      Thanks in advance,
    Best regards
    Tushar
    SAP MM Consultant

    Dear Mike,
    Thanks for your reply, & sorry for not responding on time.
      Here are my constraints:
    1) Not a single component of HR module will be implemented.(Project management decision:-()
    2) Number of user licenses are less, considering the workflow users.(Hence we have thought of creating Z table for employee nos. & EMAIL IDs ,& this table will be accessed by using M06B0001 user exit.(It is still in development phase. Truely speaking, dont know whether it will work or not).If this works out ,then I believe, record from SU01 will not be used (Please correct me here).
    3)We have 2 instances on development server.(in short,2 separate installations on same server by creating additional instance). What are the implications of this particular system landscape on workflow? Whether workflow will work or not??:-(, :-(.
    The reason I asked you 3rd question is , As soon as 2 nd instance was created on development server, Short Dumps are coming while running transactions of Workflow builder.(SWDD & PFTC).It is giving error" Table is unknown or does not exist". Description of error says"The current program"SAPLSWF3 had to be terminated because one of the statements could not be executed."
    "An SAP Open SQL Statement contains a table that does not exist in the database or is not listed in the ABAP Data dictionary.The Table is "SWF_WFPDSC" or another table is accessed in the statement.
    Program=SAPLSWF3
    Include=LSWF3U05
    Row=22
    Module name=SWF_WFP_REPOSITORY_CONTENT_GET
    The same dump is coming while accessing SWF_WFPVW table from SE16.
    Request to Mike & all of you, help me in this regard.
      Thanks in Advance,
    Regards,
    Tushar

  • Why GR performed on MRP generated delivery schedule line (unconfirmed)?

    Hi Gurus,
    Need some advice from you all, I have a scenario here which MRP generated the delivery schedule lines for material A on 10.08.2011 - 124 KG.
    User review the MRP result and didnt confirm the line, but she added in manual line on 11.08.2011 - 124KG.
    On 11.08.2011, warehouse performed GR on the delivery schedule lines. It's found that GR was actually updated into the delivery schedule line generated by MRP (10.08.2011) and not the manual line confirmed by user. (11.08.2011).
    User is questioning now why the GR able to be performed on MRP generated line which had not been confirmed? Any guru can share with me the fact and good note regarding this on MRP? Thanks!
    Michelle

    Hi,
    Since we are talking here about schedule lines, these are open for GR when the delivery schedule is send to the vendor.
    In your case you had a quantity open for 10/08/2011 generated by MRP, then the user added manually another line on 11/08/2011. After this the user will have transmitted the delivery schedule which makes that both the items where marked as transmitted and thus open for GR.
    Now when the goods come in the system will post against the first open schedule line that is found until this is fulfilled and then switch to the next open line at the moment of GR. So this is why the GR was put against the MRP generated schedule line as this one was the one with the earlier date.
    Regards,
    Peter

  • Automatic TO creation inmediatly after TR generation

    Hi,
          Im doing an stock transfer through MB1B, movement type 301. When we save the document, stock appears in storage type 920 in negative quantity. Like the process does not finished ok.
    I think it is a check in customizing, but I could not find it.
    In other enviroment, it works ok, goods goes correctly to the other plant and the stock does not appear negative in the storage type 920.
    The only difference I could find are two chechboxs in the transfer requirement that is not checked:
    Auto.TO creation.
    Indicator: Processing complete
    Thanks in advance for the help
    Regards
    Enzo

    Hi
    Its a std process in SAP when you transfer the stock from one plant to another the system reserve the stock at interim storage type 920-Transfer and when you complete the TR>TO>Confirmation then the negative goes off.
    In your case Automatic TO creation is not set up properly in Customizing thats y you are getting this issue.
    Follow the steps below
    For Immediate TO creation
    1 OMLR - Set the Automaitc TO indicator A for the Movement type 301 for your warehouse
    2 OMLZ - Tick the check boxes TO item can be confirmed immediately & Propose confirmation
    Hope it helps
    Karthik

Maybe you are looking for