MRP Planned % Safety Stock Not Generating Supply in R12 ASCP

Playing with MRP Planned Safety Stock in an unconstrained plan. See safety stock in the horizontal plan. See safety stock in the pegging tree. Yet this type of safety stock is not generating any supply recommendations. However with "regular fixed quantity" safety stock the plan is. Thanks in advance.

Hi
If I understand your qn correctly., user defined SS is working and MRP planned % is not. Have you setup MRP planned % such that you gave the SS method., bucket days and % for the item attributes?
Also make sure that you have demand for the item since it looks at your demand in future,adds up demand within the bucket days and applies the % .
Thnx
Partha

Similar Messages

  • Safety Stock Not Being Released To Cover New Sales Orders Or Forecast

    Hi,
    Does anyone know of a way to get safety stock at the lower levels of the BOM to get released for upper level sales order or forecast demand without having to adjust the effectively out to a future date?
    Example:
    A = Finish goods item with two weeks lead time
    B= component of A and it has two weeks lead time
    C= component of B and has 10 weeks lead time.
    Have safety stock hard coded with an effective date of today for 100,000 units.
    I have 100,000 in inventory and I have planned orders to cover all my demands and future safety stock requirements for the next ten weeks.
    I receive a new sales order for 50,000 units with a customer request date five weeks out.
    I am getting ATP dates to assign to the new sales order 14 weeks out versus allowing me to use 50,000 units from the safety stock to schedule in week five?
    Even If I schedule the sales order for five weeks, because I have gone down two levels to confirm that I have safety stock, and It could be used, planned orders would not get generated at the next two levels, because the demand date on the safety stock is earlier than the demand date for the new order?
    Is there any resolution that anyone has found that addresses this issue?
    We have set a demand priority rule on the ASCP plan options tab to "Sales Order Priority" where we have set criteria for number one to "Sales Orders & MDS Entries Priority" and number two to "Schedule Date".
    We have found that adjusting the supply and demand dates out to cover the full 14 week period does reduce the safety stock at the lower levels, but it also creates additional starts and inventory to be put into the line, which makes this approach not feasible.
    Does anyone have any solutions to this problem? We do not build safety stock for the sake of building safety stock. We want it to be used for any sales order or forecast demand that comes within the planning horizon.
    Appreciate any inputs.
    Regards,
    Dave

    Hi Dave,
    Try this note suggestion, possibly help you in resolving your issue.
    How to Avoid Getting Safety Stock Replenishment Too Early in an ASCP Plan [ID 301629.1]
    In order to line up the safety stock supply with the changes in safety stock, a combination of the profiles must be used:
    MSC: Use FIFO Pegging as yes
    and the plan option
    Peg Supplies by Demand Priority is checked.
    The profile MSC: Use FIFO Pegging as yes will perform the following:
    For all demands and supplies, it proceeds item by item and
    pegs supplies to demands on a daily basis. Daily supplies
    and demands are not sorted. When supplies or demands
    on a given date are used up, it picks from supplies or
    demands on the next date. The unpegged supplies are
    pegged to excess.
    The peg supplies by demand priority combined with the profile above will prevent the system to plan ahead for safety stock.
    Also no safety stock smoothing is setup.
    To implement the solution, please execute the following steps:
    1. Please set the profile:
    MSC: Use FIFO Pegging as yes and
    2. Under the plan settings in the main tab the set the following options:
    Enable Pegging ON
    Peg Supplies by Demand Priority ON
    Warm Regards
    Sivaraman.G

  • Safety stock not covered by schedule lines in planning run

    Hi !
    In our organization we are trying to implement scheduling agreements and automatic creation of delivery schedule lines through MRP. We have MRP type PD and it considers the reservations created by PM orders and Production orders as requirement elements. When I do the planning run, it creates schedule lines for the PM order reservations and purchase requisition for safety stock. I need it to create schedule lines for all scenarios. Kindly help and suggest a solution.
    Regards,
    Satya

    Hi,
    Please refer the below links.
    Schedule Lines not getting created in MRP
    Re: No Scheduling line is generated when RUN MRP
    Hope it helps you.
    Thanks.

  • Is there any way  plan safety stock  at subcontractor in MRP ?

    When the stock is at vendor ( material provided to vendor)
    and if we wanted keep safety stock at vendor by  entering safety qty in material master .After MRP run system ignores and planes addition requirements which is unwanted .Is there any way to fix for this issue ?

    Define Safety Stock Availability                                                                               
    In this step, you define the percentage of the safety stock to be                          
         available for planning. This function is used to avoid a situation where                   
         orders proposals are created unnecessarily by the system to cover small                    
         shortage quantities.                                                                               
    In MRP, the system usually carries out the lot-size calculation for every                  
         shortage and creates an appropriate order proposal or - if already                         
         available - a firm receipt with a rescheduling proposal.                                                                               
    However, it does not always make sense for a new order proposal to be                      
         created for every small shortage. These order proposals must all be                        
         managed, converted, placed in stock and settled. If you want to save                       
         yourself this effort, you can make a portion of the safety stock                           
         available for planning. This has the following consequences:                               
         o  An order proposal is not created until the stock level has fallen                       
            below the safety stock available for planning                                           
         o  If the shortage exceeds the portion of safety stock available for                       
            planning, then the system creates an order proposal in the planning                     
            run that covers this requirement and that also replenishes the safety                   
            stock.                                                                               
    o  The portion of the safety stock available for planning can only be                      
            determined using the MRP group. Therefore, to determine that a certain                  
            percentage of the safety stock of a particular material is to be                        
            available for planning, this material must have been given the                          
            appropriate MRP group in the material master record.                                                                               
    SPRO-MM-CBP-Planning-MRP calculation-stock-define-safety stock availability

  • Planning File Entry not generated for items releveant to PM

    MRP procedure used for material is reorder based planning , in April -09 the stock for this material is consumed and becomes
    zero (reorder point is 8 ,Maximum Stock Level is 8 ) and after that in MRP run the requirement is not generated .
    But as per the setting of reorder point PR should be initiated.
    When checked the MD21 , material is not flagged ,
    I want to know the specific reason why only  this material is not flagged for MRP run.
    What all settings i can check ?
    MATERIAL TYPE : YMRO   OP Maint/ Repair/OperSup
    Lot size : Repl. to max. stock level after cov. req
    Procurement type   :  F

    Hi,
    Run the reports MDRE & MDAB to ensure the planning file entries are correct.
    About your query what might have caused a entry not to be in planning file, well it could be many. So run the above reports & then run MRP & check the results.
    Regards,
    Vivek

  • Issue with -ve safety stock not allowing items of smaller demand to be isue

    We have a material with  a safety stock value of 300 with only 119 available in inventory.  Looking at MD04 the available qty immediately goes negative (-181). We have requirement of 30 but was prevented by the system from ussing the material - no iventory available message.  The workaround, which is not acceptable, was to reduice the safety stock to zero, create the delivery and then re-instate the safety stock level back to 300.
    So the issue is that  material could not be issued to PrdOrds.  Is there a possibilty that we have some missing config / master data settings that are preventing the issuing of material when safety stock is factored in and available quantity is less than zero?

    From planning perspective, there are two options available for your scenario.
    You may try if the dynamic safety stock works for you. You may have to configure the minimum, maximum  and target stock levels. The system calculates the average daily requirements of the material and determines the proposals.
    If your business process demands only static ss, you can configure the % share of ss that can be used for smaller requirements. Check the config node Production >> MRP >> Planning >> MRP calculation >> Stocks >> Define SS availability. This way the smaller requirements would be considered for use from SS by planning. You will have to define the % share of SS that can be used by planning based on MRP groups.
    Edited by: Arun.CBE on Feb 17, 2012 9:25 AM

  • MRP with Safety Stock

    Hi All,
    I am working on a trading Company. I have one scenario for Make to Stock, whenever the MRP will run it should consider the safety stock and the MRP should be run through the reorder Point. As i do not have much idea about the MRP, so please guide me on this. Please give me step by step Procedure to do this. What MRP type,shall i choose while creating the material master and which lot size? Its will be better if you clarify with an example.
    Sure,Points will be awarded.
    Thanks in advance.

    Hi Dharama,
    I have run the MRP same as the example given by you for Lot size HB and MRP type VB as--
    Ex. Stock 50
    Reorder point 60
    safety stock 30
    MAx stock level 100
    When MRp run system create P.R for 50 no's.
    I understood the first two line items as we have the safety stock as 30, so it will be reduced from the avalaiable quantity 50. It will become as 20.
    But after that, how the system is calculating on the reorder level and the maximum stock level. Please clarify me on this.
    Thanks in advance
    Sure, Points will be awarded.
    Edited by: Neeraj Saini on Oct 23, 2008 7:53 AM

  • When we run the MRP schedule lines are not generated automatically.

    Hi,
    In MD04 requirement date is on 5.12.2009.My source list validity starts from 1.12.2008 onwards.When i run the MRP for the material system generates the Purchase requisition instead of the schedlue lines.When i change the source list validity as 25.11.2008 now i run the MRP system generates the schedule lines.
    My question is why the system couldn't able to generate the schedule lines when the validity starts on 1.12.2008.In the source list we maintained the scheduling agreement and maintaine the MRP setting as 2.

    hi,
    Let me know your purchasing processing time defined in the SPRO settings for CBP?? It may be due to this also...
    Regards
    Priyanka.P

  • After MRP planned orders are not getting generated?

    HI,
    Our bussiness is make to stock and repetetive manufacturing.
    We have a prob in running MRP, i enter the demand in MD61 on day basis and after running MRP for some materials all planned orders getting generated wrt to demand but for some materials only some planned orders getting generated means it's not taking full demand ex i have material A and paln is 1000 for 10days i entered demand in MD61 for 10days 100 each and if B material is having same 1000 demand so i enter 100 each then i run MRP and the out put is im getting 10planned orders with 100 each qty for A material where as for material B im not getting  full 10 orders only 2 or 3 with 100 each what could be the reason ?
    Thanks
    KK
    Edited by: kiran kumar on Mar 23, 2010 10:19 AM
    Edited by: kiran kumar on Mar 23, 2010 10:20 AM

    Dear Kiran,
    As your saying it is Make to Stock, system will consider Availble stock in Net Req. Calculation
    what is startegy mainatined for A & B
    if you go with Strategy 11 then system will not consider the stock & Creates the requirements
    Regards
    Madhu

  • Background MRP Run Some times Planned orders are not generating.

    Dear All,
    We run MRP in the background at plant level once in a month. Some time we do not get planned order for the material in MD04. Than we run MRP (Selected material only) manually through MD01 considering MRP control parameter 13132.Than only we get planned order. Plesae let me know why it happens? Please give your comments on this.
    Thanks & Regards
    Kundan Kumar

    Dear Kundan Kumar,
    First check the output list or the results of MRP run in SM37,find out for how many materials it has
    throwned out error,I hope in this list you can find out the materials.
    Then the next step you have to check once again the material master settings.
    Instead of running in MD02,first check whether was there any issue in master data,or if this happening
    repeatedly for the same materials and work around.
    Regards
    Mangalraj.S

  • MRP Planned Percent

    Hello Gurus,
    Please can somebody help in understanding the MRP Planned Safety stock calculations
    There are "Bucket Days" and "Percent", please help me in unederstading these options and how should i set the "Bucket Days" and "Percent"
    Regards

    Hello..
    the below statement is pick from oracle inventory user guide.
    hope its help.
    Safety Stock Bucket Days
    ORACLE MASTER SCHEDULING/MRP AND SUPPLY CHAIN PLANNING ONLY
    Enter the number of days to dynamically calculate safety stock quantities. The planning
    process multiplies the Safety Stock Percent by the average gross requirements and
    divides by the number of days you enter here. See Overview of Material Requirements
    Planning, Oracle Master Scheduling / MRP and Oracle Supply Chain Planning User's Guide.
    Safety Stock Percent
    ORACLE MASTER SCHEDULING/MRP AND SUPPLY CHAIN PLANNING ONLY
    Enter the percent to dynamically calculate safety stock quantities for the item. The
    planning process multiplies this percent by the average gross requirements and divides
    by the Safety Stock Bucket Days.
    *6-48 Oracle Inventory User's Guide*
    The planning process uses this attribute when you set Safety Stock to MRP planned
    percent. See Overview of Material Requirements Planning, Oracle Master Scheduling /
    MRP and Oracle Supply Chain Planning User's Guide.

  • Safety Stock field/table in ASCP Horizontal Plan?

    Hello,
    I need to get the safety stock data that is seen from the ASCP's Horizontal Plan. Whiat table and field is it? Can't find it from MSC_DEMANDS and MSC_SUPPLIES. Thanks

    Hello,
    in an ASCP plan safety stock results/output is always populated in MSC_SAFTEY_STOCKS and not in MSC_DEMANDS.
    MSC_DEMANDS is populated for SS only in IO Plans
    safety stock demands can be seen in msc_demands with origination_type = 31
    HTH
    Geert

  • Not able to Cif Safety stock.

    Hi All
    I am not able to cif the safety stock.I tried RIMODINI also.The parameters like lot size ,text etc I m able to cif.
    But not safety stock.Can anyone help me in this.
    R

    Hi Roshan,
    If your material is  in integration model then initial transfer of that model should transfer Safety Stock as well irrespective of whether an entry is maintained in BD52- CIFMAT or not.
    Tell me one thing, is safety stock not getting transferred for all materials or for some materials?
    if it is happening with all the materials then:
    --> I think you need to check CIF logic, somewhere safety stock must be getting deleted, you may have to debug and find out.
    I hope this will help.
    Thanks,
    Anupam

  • Safety Stock (o reserved) to a Customer Cluster

    Hi Dudes...
    I have a need to define in our Stock Levels the next requirement:
    1. We have a 2 big Customer type or kind in the Company: Self Services (supermarkets) & Wholesalers
    2. In our inventory Model we are considering as follow:
         - Reorder Point
         - Safety Stock
    3. We need to get that when the stock level fall down the safety Stock, this remaining stock stay only to Self services customer and till the replenishment be triggered then, the stock could be again for the 2 kinds of customer.
    Is there any setting or customizing ti get this scenario?
    This is really important to the company, I'll appreciate your soon support.
    Please let me know if my question is clear.
    Thanks in advance
    O Perea

    Hi Dave,
    Try this note suggestion, possibly help you in resolving your issue.
    How to Avoid Getting Safety Stock Replenishment Too Early in an ASCP Plan [ID 301629.1]
    In order to line up the safety stock supply with the changes in safety stock, a combination of the profiles must be used:
    MSC: Use FIFO Pegging as yes
    and the plan option
    Peg Supplies by Demand Priority is checked.
    The profile MSC: Use FIFO Pegging as yes will perform the following:
    For all demands and supplies, it proceeds item by item and
    pegs supplies to demands on a daily basis. Daily supplies
    and demands are not sorted. When supplies or demands
    on a given date are used up, it picks from supplies or
    demands on the next date. The unpegged supplies are
    pegged to excess.
    The peg supplies by demand priority combined with the profile above will prevent the system to plan ahead for safety stock.
    Also no safety stock smoothing is setup.
    To implement the solution, please execute the following steps:
    1. Please set the profile:
    MSC: Use FIFO Pegging as yes and
    2. Under the plan settings in the main tab the set the following options:
    Enable Pegging ON
    Peg Supplies by Demand Priority ON
    Warm Regards
    Sivaraman.G

  • Safety stock caluculation

    Hi
    The issue is even though I have suffiecient stock still PRs are generating.I want to know why this PRs are generating.
    I suspect this is because of safety stock.I have maintained Safety Days' Supply 22,Safety Stock Method SM (Max.of Safety Stock and Safety Days'Sup.from Loc.Prod.Master).
    Please let me know how this safety stock caluculation works.
    R

    R,
    Rather than explain, let me just say that if it is your goal to have PRs never exceed requirements, then you should not maintain anything in Safety stock at all.  That is the whole purpose of Safety stock, to generate extra proposals to meet a particular business requirement.
    Best Regards,
    DB49

Maybe you are looking for