When we run the MRP schedule lines are not generated automatically.

Hi,
In MD04 requirement date is on 5.12.2009.My source list validity starts from 1.12.2008 onwards.When i run the MRP for the material system generates the Purchase requisition instead of the schedlue lines.When i change the source list validity as 25.11.2008 now i run the MRP system generates the schedule lines.
My question is why the system couldn't able to generate the schedule lines when the validity starts on 1.12.2008.In the source list we maintained the scheduling agreement and maintaine the MRP setting as 2.

hi,
Let me know your purchasing processing time defined in the SPRO settings for CBP?? It may be due to this also...
Regards
Priyanka.P

Similar Messages

MRP schedule lines are not created by MRP

Hi !!
I have a finished product ""111-2523-64"" and in its BOM i have a semifinished product ""111-2523-64-010"" produced(Inhouse)& three raw materials .
For the Raw Materials I have made the scheduling agreement & source list with indicator ("2"" create schedule lines automatically""
Problem -: Now when I run the MRP using T-Code MD02 the system is planning the finished & semifinished product
*but no schedule lines are created for the raw materials.*
Please Guide , Itz very urgent.

Vijay , Pleae clear
I have a doubt
I am having one finished product & in its BOM i have three raw materials.
I have created the scheduling agreement for these three raw materials and source list too.
now when i run the MRp for finished product using t-code md02 the schedule lines must be generated for these three raw materials.
or
i have to run the MRP (seperately using T-Code Md01 ) for these three raw materials
Please guide , its very urgent.

Schedule lines are not generating properly in MD04

Hello All,
I have a issue in MD04, in which schedule line for Schedule agreement is not getting generated on the same day as sales order is created (09.05.2014). But Schedule line is getting created in different date. Because of which i am creating schedule lines manually at required dates.
Note: I have attached screen shot of MD04
Kindly help me to overcome this issue.
Regards,
Manoj

Hello Manoj
Please observe that there are rescheduling exception messages and rescheduling dates for your scheduling agreements. It generally happens when you have sales orders in the past and you don't allow "start in the past" for replenishment proposals generated by MRP.
Go to the customizing transaction OPPQ and change the customizing "start in the past". After that, run MRP again for your material and the schedule line dates should match the sales order. Please observe that firmed schedule lines wont't be changed.
BR
Caetano

Schedule lines are not getting generated during MRP Run

Schedule lines are not getting generated during MRP Run. I have maiantained source list for the material with proper validity date and also maintained scheduling agreement . MRP relevvant Indicator , I have marked - 2 which means -Record relevant to MRP. Sched. lines generated automatically.
Still I am not able to get schedule lines and instead of that *Purchase Requisitions* are getting generated.
Can any one help me and suggest me what to be done in this case .
Thanks & Regards ,
Nirmalya

Dear,
Welcome to SDN,
In transaction OMDT you have to enable the indicator create schedule lines
In MD02 MRP control Prameter here select the Delivery schedules -3- Schedule line. Processing Key as NETCH and Planning Mode - 3 delted and recreated.
Maintain source list ME01, in that put MRP indicator as '2' i.e. schedule lines via MRP.Put your agreement no in that.
If u run MRP properly u will get schedule lines automatically in ME38.
Make the schedule agreement, make it source relevent in the source list make is FIX and MRP indicator as 3.
Regards,
R.Brahmankar

What are the criterias to consider while deciding when to run the mrp?

Hello Friends,
Actually i was just thinking,if any company wants to run the mrp for planning than how to decide,when to run the mrp(daily,weekly,monthly).
One of the factor,while deciding this could be the raw material procurements,right?if they procure raw material once in a month than they should run the mrp once in a month.(even we can control this by keeping monthly lot size,if you run the mrp every week).
What could be the other reasons?
Thanks and Regards,
Jitendra Chauhan

Dear Jitendra,
As said by our other forum friends it depends on the business requirement.
In one of my project as the client were recieving monthly plan for their production MRP was carried out monthly.
It can be based on the production plan or say sometimes the maximum lead time for producing a product.
Also Check this link,
[MRP Activities|http://www.sage.co.uk/sage1000v2_1/form_help/workingw/Subfiles/mrp_activities.htm]
Regards
Mangalraj.S

Schedule lines are not in sink for PO

Hello Everyone,
We are using ECS.
So we create PO in SRM with some schedule lines and transfer it to the ECC system.
But sometimes the schedule lines are not in sink on both the sides because buyer update the schedule lines on SRM side.
So we need to check that is schedule lines in SRM and Basic quantity in SRM are same or not?
So is there any OSS note to check this?
Regards,
Khushbu.

Hi,
In transaction OMDT you have to enable the indicator create schedule lines
In MD02 MRP control Prameter here select the Delivery schedules -3- Schedule line. Processing Key as NETCH and Planning Mode - 3 delted and recreated.
Maintain source list ME01, in that put MRP indicator as '2' i.e. schedule lines via MRP.Put your agreement no in that.
If u run MRP properly u will get schedule lines automatically in ME38.
Make the schedule agreement, make it source relevent in the source list make is FIX and MRP indicator as 3.

Schedule line should not generate until SA release

Dear All,
We want when we run MRP against schedule agreement then "Schedule line should not generate until SA release"
Abhinay

HI Abhinay Sachan ,
Bascially when we run the MRP the system generate the Schedule Lines for that schedule line we are doing release .....
If you have SA for a particular materail system gives the Error or warrning message based on the setting what we made...if it is error sysetm won't allow other wise it is warrning meaasge means we can cretae the PR for the particular materail i hope i wll help you
Regards
Murugan J

Lines are not generated for holidays and sundays

Hi
creating a sale order shcedule lines are not generated for sunday for a particular plant .
Schedule lines are generated for subsequent monday only.
the plant calander is also correct
with regards
partha

Hi
I would really double check the factory calendar ans the of the plant and sales organisation
regards,
Sidi

Schedule Lines are not getting generated after MRP run.

Hi,
I have an issue where a SA exists for the parent material with item category L (subcontracting). The parent material has a valid BOM and some sub components as well. I see in CS03 that BOM is fine with validity dates for the parent material. A valid source list also exists for the parent material where SA is present as the source of supply with MRP indicator as 2. Now when i run MRP for the parent material using MD02 (NETCH), with indicators as below:
Create pur.req. 2
Schedule lines 3
Create MRP list 1
Planning mode 1
i don't see any schedule lines in MD04. Instead it creates a PR that too without any source of supply.
In master data for the parent material MRP type is PD with Procurement type F and special procurement key 30. I have checked and every thing seems to be fine still MRP run doesn't create schedule lines.
Any help is appreciated. I can give more info if required.
Thanks.

Dear Rakesh,
Scheduling agreement:An outline agreement against which materials are procured at a series of
predefined points in time over a certain period.
1.For this you have to first use ME31L for creating scheduling agreement and then ME38 for maintaining scheduling agreemnet
schedule.
2.Ensure in the source list after maintaining the material,vendor combination the setting for MRP relevancy is set to 2 - Record
relevant to MRP,Schedule line generated automatically.
Moreover you have to use value 3 for delivery schedule line which is one of the MRP control parameter while taking MRP run.
So for the materials for which scheduling agreement exists,schedule lines will be generated.
Check and revert back.
Regards
Mangalraj.S

Schedule lines are not getting generated through MRP

Hello Experts,
While running MRP, we observed that the system is creating PR instead of schedule lines, although all the necessary prerequistes to generate schedule lines through MRP are maintained. For e.g.
1. MRP Schedule line relevant indicator '2' is maintained in the Source List.
2. Sch. Agreement dates and Source List validity dates are same.etc...
Further after some analysis, we observed that if we change the source list validity from date to some back date then system is creating correct schedule lines.
Example: Material M1; Planned delivery time 7 days; GR processing time 5 days; MRP Type PD; Lot Size WB;
SA validity dates - 07.09.2011 to 31.12.2011
Source List validity dates - 07.09.2011 to 31.12.2011
If MRP run on 12.09.2011 and source list dates are retain same as mentioned above, system creates the PR.
If MRP run on 12.09.2011 and source list dates changes to 05.09.2011 to 31.12.2011, system creates the schedule lines.
Could you please let us know, why the system behave like this?

Dear,
Welcome to SDN,
In transaction OMDT you have to enable the indicator create schedule lines
In MD02 MRP control Prameter here select the Delivery schedules -3- Schedule line. Processing Key as NETCH and Planning Mode - 3 delted and recreated.
Maintain source list ME01, in that put MRP indicator as '2' i.e. schedule lines via MRP.Put your agreement no in that.
If u run MRP properly u will get schedule lines automatically in ME38.
Make the schedule agreement, make it source relevent in the source list make is FIX and MRP indicator as 3.
Regards,
R.Brahmankar

HT1338 my mac uses OSx 10.6.8. when i run the software update, it does not show 10.8.2. I need icloud i the latest version

i'm trying to update from OS X 10.6.8. when I run the sofware update nothing shows up. I need iCloud.

Make sure your system meets the requirements for Mountain Lion:
Mac OS X 10.8 "Mountain Lion" System Requirements
To install Mountain Lion, you need one of these Macs:
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Xserve (Early 2009)
Your Mac needs:
OS X v10.6.8 or OS X Lion already installed
2 GB or more of memory (RAM)
8 GB or more of available hard disk space
If your system does not support Mountain Lion's requirements, you may be able to upgrade to Lion. To do that you must call Apple again to order a download code. Redeem the download code in the App Store to download Lion.
Make sure your system meets the requirements for Lion:
Mac OS X 10.7 "Lion" System Requirements
Mac with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon CPU
Core Duo CPUs are not sufficient for Lion
2GB of memory (RAM)
OS X v10.6.6 or later (v10.6.8 recommended)
To determine which Mac you have, what kind of CPU it uses, and how much memory is installed:  > About this Mac
The specified 2 GB minimum is barely adequate for either Lion or ML. They will run in 2 GB but you may not like its performance. 4 GB is a more realistic minimum.

When i run .app package keyboard controls are not available

I have built an opengl application using glfw & xcode. When i run the .app package resulted, from outside xcode, the keyboard is not responding. If i run the application from inside xcode or by running the actual binary from the terminal(or just by double clicking it) the keyboard and mouse input are working as expected.
What could be wrong when i double click the .app folder?

Is there a setting that needs to be set to allow the annotation features? I set password protection to open and then password for editing and set it to Any except page extraction, but it still did not give the annotation option

Schedule lines are not getting confirmed even though stock is there

HI,
i want to discuiss one sensitive issues which is a simple one.
my schedule lines is not getting confirmed even stock is there at sales order.
there is no delivery block.
there is no minimum stock level.
there is no credit check for that.
there is stock of 2 EA in that plant and storage location, but stock is not getting confirmed at sales order level or transaction level.
even stock is there it is going to avaliability check overview screen and giving stock confirmation after 12 days.
even i checked all the dates.............but its of no use.
what to do ?
after testing all the possible options i am taking help from
please help me in this regard,
regards,
balajit

Hi
you need to check the following.....
First check the Factory calander of your plant whethear some holidays or not
Second most importantly you have to check which stretagy group is assigned in the material . whethear it is make to order or make to stock. change it as make to stock.
"What happened if material stretagy group is make to order then from sales order system generate requirement of that material against that particular stock, that time system do not consider the unrestricted stock and not confirm schedule line."
Regards
Shambhu Sarkar

Schedule lines are not coming for HALB after MRP run

Dear All,
I am not getting schedule line after mrp run, inspite of all required setting only purchase requisitions are coming.
Material type is HALB and involve a subcontracting process (30). For raw material I am getting the schedule line but in the case of HALB, it is not coming.
Pls let me know if I am missing something and guide me further on this.
Thanks & Regards
Kundan Kumar

Hi,
In transaction OMDT you have to enable the indicator create schedule lines
In MD02 MRP control Prameter here select the Delivery schedules -3- Schedule line. Processing Key as NETCH and Planning Mode - 3 delted and recreated.
Maintain source list ME01, in that put MRP indicator as '2' i.e. schedule lines via MRP.Put your agreement no in that.
If u run MRP properly u will get schedule lines automatically in ME38.
Make the schedule agreement, make it source relevent in the source list make is FIX and MRP indicator as 3.

Schedule lines are not coming after MRP run for HALB material

Dear All,
I am not getting schedule line after mrp run, inspite of all required setting only purchase requisitions are coming.
Material type is HALB and involve a subcontracting process (30). For raw material I am getting the schedule line but in the case of HALB, it is not coming.
Pls let me know if I am missing something and guide me further on this.
Thanks & Regards
Kundan Kumar

Dear All,
I am closing this thread. As the vendor mentioned in scheduling agreement is not a subcontracting vendor. Its a individual vendor.
Thanks for all the reply.
Thanks & Regards'
Kundan Kumar

When we run the MRP schedule lines are not generated automatically.

Similar Messages

Maybe you are looking for