MRP splitting the reservation qty to multiple purchase requisitions

Hi SAP gurus,
We currently have an issue with our MRP splitting the total reservation qty into two purchase requsitions.
For example: Res A = 100. After MRP run, 2 Pur Reqs will be generated with PR 1 = 60 and PR 2 = 40.
We checked the source list, info records for minimum order qty but we are not maintaining it at all. We also tried entering the max lot size to 10,000 but still it didn't work.
Any advice on how we could resolve this, please?
Thanks in advance.
Cheers,
Christine

Christine,
For the purposes of troubleshooting, you should ensure that both purchase reqs are unfirmed, then use "3 delete/recreate" planning mode for your MRP runs to minimize possible confusion.  So, 1-3-1-3-1 until this is fixed.  Also, run regen one time NETUPL.
What is your Strategy group?
And to confirm and reiterate, your Material master stuff is
Quota arrangement usage = blank
Min lot = 0
max lot = 10000
max stock = 0
rounding = 0
Rounding profile= blank
No entries whatsoever in the Safety stock block
Planned delivery time 154
No entries whatsoever in the 'Storage Location MRP' block
Your reservation creation date is Nov 11 and your reservations reqment date is Nov 11.  You have no other supply elements (purchase orders/purchase reqs/stock/production orders/planned orders etc) and you have no other requirements elements (sales orders/deliveries/other reservations/dependent rqments, etc).
Are your purchase reqs sourced?  Are the sources different? If so, can you give me the standard qty and maximum qty and planned delivery time from each of the Purchase info records?  Or, are you using a Contract or a Scheduling agreement?
Rgds,
DB49

Similar Messages

  • Issud  qty is  greter  than  the   Reservation  qty

    Dears,
    I   Have  creted the   Resevation  100 qty  for  cost center 1.
    While  i  am    issuing  the   qty    to   cost  center system  is  allowing  more qty  than  the  reserved   qty100.
    Even  if  i  given  the  200  qty  system  is  posting the  Document .
    How  Avoid  this  Posting  and  where  i  ahve   to    cofigure  the    System   setting  please  Guide   Me.
    If  i  am   issuing the   More  qty  than  the   Reserved  qty  systemm  should  give  the   Error  message.
    Like issued qty  is  more  than  the   Reserved    qty .

    This can be controlled by setting the messages to Error in the Relevant application area.
    Go to SPRO-MM-Inv Mgmt & Phy Inv-Define attributes for System messages / use trxn code OMCQ and find the Relevant message number and set to Error and Save.
    Also Check in SPRO-MM-Purchasing-Environment-Define attributes for System messages / use trxn code OMC0 (trxn code may not work) and find the Relevant message number and set to Error and Save.
    Eg : 06 078 Target quantity exceeded by  & & etc

  • Split the delivery or create multiple  deliveries

    Hi team,
    Sale order stock is grater than Truck capacity.
    We need a solution to either split the delivery; or create multiple deliveries at the time of delivery creation.
    Manually we are doing calculations for pallets capacity and then doing loading still some quantity pending or some space pending
    Is there any program that can split delivery via Sales order and create Outbound delivery through pallatization..
    Any such scenarios you have please suggest.?
    Thanks in Advance
    SAP MM

    Hi,
    Normally we can split the deliveries based on the following criteria
    1. Different delivery dates for line items.
    2. Different ship to parties for line items.
    3. Different routes for line items.
    But in your above case the issue is regarding truck capacity for which the system doesn't have any information.  So you can manually create a new delivery by adjusting the existing one or if you feel the issue is going to repeat for different items in future also then you can go build a custom logic in the system to address the delivery split using a user exit.
    Thanks,

  • How do you split the print job across multiple printers to shorten the prin

    i
    Can any one you provide some information on below questions.
    Check printing by XML template (XML Publisher).
    1. When printing checks, how do you print the checks from one printer tray and the overflow remittance pages from another printer tray?
    2. When printing a large batch of checks using XML and PDF output, how do you split the print job across multiple printers to shorten the print time?
    I appreciate if you could give some information on above 2 questions.
    Regards,
    Ramarao.

    Probably sould just do them individually.
    How to get all the iWork apps, iPhoto, and iMovie for free on an eligible iPhone or iPad
    http://www.imore.com/how-get-all-iwork-apps-iphoto-and-imovie-free-eligible-ipho ne-or-ipad
    About Free Apple Apps for iOS 7 compatible devices
    http://support.apple.com/kb/HT5913
     Cheers, Tom

  • How to use parallel sequence for split the operation qty. urgent or other o

    PP guru
    My scenario is as follows.
    I ve one material suppose…xyz.
    For that material I' ve created bom, routing.
    In routing I' ve mention only one operation. 0010.
    Now I' ve the production order of 1000 kg.
    I want to use two work centers to run this production order. ( e.g.work center a and b)
    In routing I used work center a.
    In short I want split that operation.
    So what I ve to do or use parallel sequence and how???
    or else is there any other option to split the order to two or more machines/work center?
    Pls explain me in brief.
    Regards,
    Ram

    Hi,
      If you want to carry the production with two different work centers , first you need to split the operation qty.
    For this in the order type dependent parameters OPL8
    in the controlling tab page enable the indicator Cost collector
    and set the default rule as PP2.
      Create a Product cost collector with KKF6N.
       Now in the production order , select the operation and choose functions--->>> split.
       Now enter the operation split quantity and execute.
       Now in MD04 you can see two production order.
       In the second production order change the work center in the operation overview as desired and save.
      Regards,
    nandha

  • HT1399 When I import a CD to itunes, it splits the album in to multiple entries. I have changed the info on some but others just will not merge. Is there an easy way to do this and can I stop them from splitting in future? Thanks

    When I import a CD to itunes, it splits the album in to multiple entries. I have changed the info on some but others just will not merge. Is there an easy way to do this and can I stop them from splitting in future? Thanks

    Okay this is what fixed my problem. Some kind of error/glitch occured half-way through importing that third cd that prevented further imports from any other cd. Once I completely removed the half-imported cd album from my library I could further import cd's without any problems.

  • Syndicator Server: possible to split the export file in multiple file?

    Hello,
    is it possible to split the export files into multiple files e. g. at 5000 records?
    Perhaps there is a possibility in the mdss.ini? Or a setting in the mapping?
    Thank your for your responses!
    Melanie

    Hi Melanie,
    - If you are syndicating in the Xml format you have the option to syndicate one xml for every record. or multiple records one xml.
    For this you have to make a simple setting in the Syndicator-> Map properties->XML file output->(multiple files/single file)
    Other way around is:
    - If you are syndiacting in any other format say text then the output file goes as one file for all records present in the MDM repository, for this you can use the search options.
    - Create a search on some field value which will select a set of records from the lot.
    - Then you can syndicate only those records which satisfies the  search criteria.
    - In this way it is possible to syndicate in parts
    Hope It Helped,
    Kindly Reward Points if found useful
    Thanks & Regards
    Simona Pinto

  • How to Park the single invoice for multiple purchase orders

    Hi,
    How to Park the single invoice for multiple purchase orders?

    brother this is possible to enter one Invoice fro multiple purchase order.
    call transaction MIR7, select " purchase order/Scheduling Agreement" from the PO refernce Tab. then click on arrow. give your purchase orders here.
    Thanks

  • How to Configure Multiple Purchase Requisitions per Service Order

    Hi experts!
    Sorry if this is in the wrong spot, but I was wondering how I can configure multiple Purchase Requisitions to be created from a service or maintenance order (IW31) based on the control key (or if it's even possible).
    What would be the pros and cons of doing this?  We currently only have one PR being created for one order (a 1-to-1 relationship), however now with implementing external services, we want 2 or more PRs created based on the control key.  Is the control key the best way to go, or should I be looking at a different deciding field?
    Thanks in advance!
    Stephanie

    Raj,
    Thank you so much for the information.  That does help!  However business requirements are now changing to have different Purchase Requisitions created for a single order in the following scenarios:
                 - New Purchase Req created for different operations (you explained how above, perfect!)
                 - Seperate Purchase Req created for non-stock items (your answer above seems to group service operations and non-stock into the same Purchase Req).
                 - New Purchase Req created if the order has already been released.  (If the order's status is still at "Create", then the additional component can be appended to the existing Purchase Req.  If the order's status is "Released", and a new component is added, a new Purchase Req is created).
    As mentioned, you explained how to do the first requirement.  Is there anyway SAP can handle the next two requirements using standard config and not customizing anything?
    Thanks in advance!
    Steph

  • Reservation Relevance/Generation of Purchase Requisition inproduction order

    hi,
    i want know in prodution order ,component overview "Reservation Relevance/Generation of Purchase Requisition"that is 1=never.2=from releas.3=immediately,where is these setting occures that is refelect,
    in ordertype depened paramete if if i set"Reservation Relevance/Generation of Purchase Requisition"=2when creaeteproduction orer manually it is display=2 in component overview and in headercontrl tab is also,but when we create production rom mrp run or manually plaaned creation through,when conver production order it is dispaly "Reservation Relevance/Generation of Purchase Requisition".plz any one tell how it is come .if we want here 2 then how it is come 2.
    T&R

    Hi,
    Check TCode OPL8 - Order type parameters
    give plant ans order type then goto planning - purchase requitions field should be 3 (select 3)
    it will solve your problem
    Regards,
    Sankaran

  • Deletion of Multiple Purchase Requisitions

    How to delete multiple Purchase Requisitions at a time?
    Thanks
    Madhavan

    Hi
    SAP does not support mass deletion of PR. But you've got the option of performing this task through LSMW or BDC.
    Hope this helps.
    Rgards
    Sidd

  • Stock Transfer Reservation in spite of Purchase Requisition in MRP run

    Dear SAP gurus,
    We are running MRP heuristic on the PP/DS and we have different results comparing our development and productive environments.
    In our productive environment purchase requisitions are generated and in our development environment stock transfer reservations are generated as result of the MRP run.
    Where can I check differences of configuration that would be causing this?
    Thanks and BR
    Mauricio

    Mauricio,
    I guess I was not clear in my suggestion, I apologize.  Differences in T001W between ERP dev and prod will not necessarily generate your problem, differences in sourcing within APO between APO dev and APO prod will generate the differences.  I only mentioned the vendor number because a transportation lane can exist 'source plant > destination plant', but also you can have a transportation lane 'vendor of source plant > destination plant' which would also have an impact on the type of req created.
    Easier to check the sourcing, //PWBSRC1, mentioned earlier.  Your dev system should contain no objects that relate to Stock Transport orders.  You can delete the STO sourcing records within that transaction, which will also delete the material assignment to the Transportation lane.  Hopefully you will then get the default external supply proposal, which is normally a Purchase req.
    Also check for presence of quota arrangements //SCC_TQ1.  Delete any that unnecessarily refer to an STO object.
    Best Regards,
    DB49

  • Splitting the single record into multiple records based on validity

    Hi Guru's,
    basically i am an BI consultant with less knowledge on ABAP, can i request your help on the ABAP task.
    I am working on HR module which is integrated with SAP BI,  the reports will be executed based on calendar month the requirement is i should split the single record into a multiple records based on validity of the record.  basically the HR data would be in data from and date to. 
    below is the logic
    Check whether the start and end date of the record are in the same month and year.
    If yes  nothing changes
    If no  create multiple records
    1st record  original start date of the record u2018till end of that month
    Following record  1st of the next month  u2018till last day of the month
    u2026
    Last record  1st of the month u2018till original end date.
    All fields will have the same values, only the datefrom and dateto fields change.
    Can any one please provide me the same code to proceed on my task.
    Thanks and Regards,
    Venkat

    Hi,
    Using Rule group we can split it.
    Using Rule Group in SAP-BI  Part - 1
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/s-u/using%20rule%20group%20in%20sap-bi%20%20part%20-%201.pdf
    Thanks
    Reddy

  • Looking for table that links a PM Reservation to a MM Purchase Requisition

    Looking for table that links a PM Reservation to a MM Purchase Requisition

    Hi,
        Typically the way most SAP systems are configured, there are two scenarios here:
    1. The component reserved in the PM order is item category 'N'. This is a non inventory item and must be directly procured for consumption against the PM order at the point of goods receipt. In this case no reservation is created and instead a requisition is directly created (in table EBAN) and the requisition is account assigned directly to the PM order (in table EBKN - field AUFNR).
    2. The component reserved in the PM order is item category 'L'. In this case no requisition is directly created, instead a reservation is created against the item in stock (in table RESB). If there is sufficient stock of the item already then the item is consumed when it is goods issued to the PM order from stock using MIGO and there is no requisition created. In the event that there is not sufficient stock of the item for the reservations that exist, when MRP is run, a requisition will be created to replenish the stock, but this requisition will not be assigned to a specific PM order as it could be replenishing stock of the item for several reservations which are all for different orders. So in this scenario there is no direct link from the reservation generated by the PM order to the requisition.

  • Splitting the single record into multiple:One-to-Many;S'ingLikeRESULT_TABLE

    Hello Friends,
            I am an ABAPer and new to BW. we have a requirement as follows.
    BW is getting data from R/3 system. all the purchasing, sales data and billin data.
    at the BW end for each Material document we get multiple ITEMS. ( items will be retrieved at BW end)
    the question is how to get the multiple entries in the result.
    Each material will have one or more items. so we want to write a separate record for each item. Can we do it using RESULT_TABLE?
    I have no idea how the data process at BW end.
    I have been trying to find the info in SDN but could get what exactly they are saying. bit confused with key figures and so.
    Can anyone of you give some  idea on how to get this done please ?
    Thanks a lot for your help..
    Regards,
    reddy
    Edited by: SAP User on May 19, 2008 4:27 PM

    Ramesh,
       Thank you for the resp.
        Could you please tell me which table actually holds the data that is coming from R3 system?
    at the moment I am trying to get the item data from a select statement for a particular master data (which is coming from COMM structure). then i am updatting the return table. but only the last value is getting updated in the final output.
    Could you please give me some idea on how to do this? Thanks
    Regards,
    Sree

Maybe you are looking for