MS 8606 Audio Capture can't start

Have MSI TV@nywhere Master.  The audio capture driver didn't install automatically from the cd.  I tried forcing the driver to install and now it says:
This device cannot start. (Code 10)
Any suggestions or ideas to help??
Athlon 2600
soyo kt400 ultra
ati 9800 pro
soundblaster audigy

AVI_IO is a VFW program the TV@nywhere Master is a WMD device. The frame size you are getting from AVI_IO is not an unusual occurance with some TV cards. I can not get VirtualDub to capture over 352x288 PAL although some others brands of TV card can. I have not been able to get AVI_IO to work at all on my WinXP system so I guess that you are not using WinXP.
The fact that you are able to capture using AVI_IO would suggest that the card is OK and that your system is possibly at fault. I did have problems on my first install and the audio drivers did not install but once manually installed they have been no problems from them.
Have you tried clearing out all the TV card drivers and software (I mean manually removing all traces) and re-installing?
Perhaps try moving the card to another slot or just reseating it, and/or remove the drivers via device manager and reboot the PC and let the OS find them again.
Perhaps it may be time to do a clean install of the OS?
I found it nessecary to do it at least every 12 months and sometime much sooner when I was using any other OS before WinXP. It will certainly cancel out any possiblity that it is your system at fault.

Similar Messages

  • DigiVOX A/D can't start

    Hello there I need Help! I freshly bought a DigiVOX A/D, I've tried to install it on my Travelmate but Windows told me that MSI USB EMP Audio Device can't start! off course  the consequence is that I can't watch the TV.
    What should I do?
    I have already clean the registry, dinstall software and off course reinstall the drivers! 
    Thanks to all

    give more details on your laptop

  • [Solved] Can't Start Pulse Audio and No Sound/Volume Controls

    Ok, I booted my PC this morning to find I have no sound controls in Gnome Shell after an update yesterday or sound, I have to use alsamixer to unmute, so I am getting sound but no way to control it.  I tried killing pulseaudio and restarting but I keep getting the same error:
    pulseaudio -k:
    E: [pulseaudio] main.c: Failed to kill daemon: No such process
    pulseaudio --start:
    E: [pulseaudio] main.c: Daemon startup failed.
    start-pulseaudio-x11:
    Connection failure: Connection refused
    pa_context_connect() failed: Connection refused
    This is the output of pulseaudio -v:
    I: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
    I: [pulseaudio] core-util.c: Successfully gained nice level -11.
    I: [pulseaudio] main.c: This is PulseAudio 6.0
    I: [pulseaudio] main.c: Page size is 4096 bytes
    I: [pulseaudio] main.c: Machine ID is 74ef4413bd254c10a2eee6b69deab3c7.
    I: [pulseaudio] main.c: Session ID is c2.
    I: [pulseaudio] main.c: Using runtime directory /run/user/1000/pulse.
    I: [pulseaudio] main.c: Using state directory /home/dobbie/.config/pulse.
    I: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-6.0/modules.
    I: [pulseaudio] main.c: Running in system mode: no
    I: [pulseaudio] main.c: Fresh high-resolution timers available! Bon appetit!
    I: [pulseaudio] cpu-x86.c: CPU flags: CMOV MMX SSE SSE2 SSE3 SSSE3 SSE4_1 SSE4_2
    I: [pulseaudio] svolume_mmx.c: Initialising MMX optimized volume functions.
    I: [pulseaudio] remap_mmx.c: Initialising MMX optimized remappers.
    I: [pulseaudio] svolume_sse.c: Initialising SSE2 optimized volume functions.
    I: [pulseaudio] remap_sse.c: Initialising SSE2 optimized remappers.
    I: [pulseaudio] sconv_sse.c: Initialising SSE2 optimized conversions.
    I: [pulseaudio] svolume_orc.c: Initialising ORC optimized volume functions.
    I: [pulseaudio] module-device-restore.c: Successfully opened database file '/home/dobbie/.config/pulse/74ef4413bd254c10a2eee6b69deab3c7-device-volumes'.
    I: [pulseaudio] module.c: Loaded "module-device-restore" (index: #0; argument: "").
    I: [pulseaudio] module-stream-restore.c: Successfully opened database file '/home/dobbie/.config/pulse/74ef4413bd254c10a2eee6b69deab3c7-stream-volumes'.
    I: [pulseaudio] module.c: Loaded "module-stream-restore" (index: #1; argument: "").
    I: [pulseaudio] module-card-restore.c: Successfully opened database file '/home/dobbie/.config/pulse/74ef4413bd254c10a2eee6b69deab3c7-card-database'.
    I: [pulseaudio] module.c: Loaded "module-card-restore" (index: #2; argument: "").
    I: [pulseaudio] module.c: Loaded "module-augment-properties" (index: #3; argument: "").
    I: [pulseaudio] module.c: Loaded "module-switch-on-port-available" (index: #4; argument: "").
    I: [pulseaudio] (alsa-lib)utils.c: could not open configuration file /usr/share/alsa/ucm/HD-Audio Generic/HD-Audio Generic.conf
    I: [pulseaudio] (alsa-lib)parser.c: error: could not parse configuration for card HD-Audio Generic
    I: [pulseaudio] (alsa-lib)main.c: error: failed to import HD-Audio Generic use case configuration -2
    I: [pulseaudio] alsa-ucm.c: UCM not available for card HD-Audio Generic
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device front:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D1c' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device front:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround21:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround40:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround41:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround50:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround51:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround71:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D1p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:1
    I: [pulseaudio] alsa-util.c: Error opening PCM device a52:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:1
    I: [pulseaudio] alsa-util.c: Error opening PCM device a52:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:1
    I: [pulseaudio] alsa-util.c: Error opening PCM device dca:1: No such file or directory
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hdmi:1: Invalid argument
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hdmi:1: Invalid argument
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1
    I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1: No such file or directory
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,1
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,1: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,1
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,1: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,1
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,1: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,1
    I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,1: No such file or directory
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,2
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,2: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,2
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,2: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,2
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,2: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,2
    I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,2: No such file or directory
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,3
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,3: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,3
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,3: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,3
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,3: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,3
    I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,3: No such file or directory
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,4
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,4: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,4
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,4: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,4
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,4: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,4
    I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,4: No such file or directory
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,5
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,5: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,5
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,5: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,5
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,5: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,5
    I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,5: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D12p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,6: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D12p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,6: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D12p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,6: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,6
    I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,6: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D13p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,7: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D13p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,7: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D13p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,7: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,7
    I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,7: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
    I: [pulseaudio] module-card-restore.c: Restoring port latency offsets for card alsa_card.pci-0000_01_00.1.
    I: [pulseaudio] card.c: Created 0 "alsa_card.pci-0000_01_00.1"
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
    I: [pulseaudio] alsa-util.c: ALSA period wakeups disabled
    I: [pulseaudio] alsa-sink.c: Successfully opened device hdmi:1.
    I: [pulseaudio] alsa-sink.c: Selected mapping 'Digital Stereo (HDMI)' (hdmi-stereo).
    I: [pulseaudio] alsa-sink.c: Successfully enabled mmap() mode.
    I: [pulseaudio] alsa-sink.c: Successfully enabled timer-based scheduling mode.
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] sink.c: Created sink 0 "alsa_output.pci-0000_01_00.1.hdmi-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    I: [pulseaudio] sink.c: alsa.resolution_bits = "16"
    I: [pulseaudio] sink.c: device.api = "alsa"
    I: [pulseaudio] sink.c: device.class = "sound"
    I: [pulseaudio] sink.c: alsa.class = "generic"
    I: [pulseaudio] sink.c: alsa.subclass = "generic-mix"
    I: [pulseaudio] sink.c: alsa.name = "HDMI 0"
    I: [pulseaudio] sink.c: alsa.id = "HDMI 0"
    I: [pulseaudio] sink.c: alsa.subdevice = "0"
    I: [pulseaudio] sink.c: alsa.subdevice_name = "subdevice #0"
    I: [pulseaudio] sink.c: alsa.device = "3"
    I: [pulseaudio] sink.c: alsa.card = "1"
    I: [pulseaudio] sink.c: alsa.card_name = "HD-Audio Generic"
    I: [pulseaudio] sink.c: alsa.long_card_name = "HD-Audio Generic at 0xfbf9c000 irq 28"
    I: [pulseaudio] sink.c: alsa.driver_name = "snd_hda_intel"
    I: [pulseaudio] sink.c: device.bus_path = "pci-0000:01:00.1"
    I: [pulseaudio] sink.c: sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1"
    I: [pulseaudio] sink.c: device.bus = "pci"
    I: [pulseaudio] sink.c: device.vendor.id = "1002"
    I: [pulseaudio] sink.c: device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
    I: [pulseaudio] sink.c: device.product.id = "aac0"
    I: [pulseaudio] sink.c: device.string = "hdmi:1"
    I: [pulseaudio] sink.c: device.buffering.buffer_size = "352768"
    I: [pulseaudio] sink.c: device.buffering.fragment_size = "176384"
    I: [pulseaudio] sink.c: device.access_mode = "mmap+timer"
    I: [pulseaudio] sink.c: device.profile.name = "hdmi-stereo"
    I: [pulseaudio] sink.c: device.profile.description = "Digital Stereo (HDMI)"
    I: [pulseaudio] sink.c: device.description = "HD-Audio Generic Digital Stereo (HDMI)"
    I: [pulseaudio] sink.c: alsa.mixer_name = "ATI R6xx HDMI"
    I: [pulseaudio] sink.c: alsa.components = "HDA:1002aa01,00aa0100,00100500"
    I: [pulseaudio] sink.c: module-udev-detect.discovered = "1"
    I: [pulseaudio] sink.c: device.icon_name = "audio-card-pci"
    I: [pulseaudio] source.c: Created source 0 "alsa_output.pci-0000_01_00.1.hdmi-stereo.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    I: [pulseaudio] source.c: device.description = "Monitor of HD-Audio Generic Digital Stereo (HDMI)"
    I: [pulseaudio] source.c: device.class = "monitor"
    I: [pulseaudio] source.c: alsa.card = "1"
    I: [pulseaudio] source.c: alsa.card_name = "HD-Audio Generic"
    I: [pulseaudio] source.c: alsa.long_card_name = "HD-Audio Generic at 0xfbf9c000 irq 28"
    I: [pulseaudio] source.c: alsa.driver_name = "snd_hda_intel"
    I: [pulseaudio] source.c: device.bus_path = "pci-0000:01:00.1"
    I: [pulseaudio] source.c: sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1"
    I: [pulseaudio] source.c: device.bus = "pci"
    I: [pulseaudio] source.c: device.vendor.id = "1002"
    I: [pulseaudio] source.c: device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
    I: [pulseaudio] source.c: device.product.id = "aac0"
    I: [pulseaudio] source.c: device.string = "1"
    I: [pulseaudio] source.c: module-udev-detect.discovered = "1"
    I: [pulseaudio] source.c: device.icon_name = "audio-card-pci"
    I: [pulseaudio] alsa-sink.c: Using 2.0 fragments of size 176384 bytes (999.91ms), buffer size is 352768 bytes (1999.82ms)
    I: [pulseaudio] alsa-sink.c: Time scheduling watermark is 20.00ms
    I: [pulseaudio] alsa-sink.c: Driver does not support hardware volume control, falling back to software volume control.
    I: [pulseaudio] alsa-sink.c: Driver does not support hardware mute control, falling back to software mute control.
    I: [alsa-sink-HDMI 0] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
    I: [alsa-sink-HDMI 0] alsa-sink.c: Starting playback.
    I: [pulseaudio] module.c: Loaded "module-alsa-card" (index: #6; argument: "device_id="1" name="pci-0000_01_00.1" card_name="alsa_card.pci-0000_01_00.1" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"").
    I: [pulseaudio] module-udev-detect.c: Card /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1 (alsa_card.pci-0000_01_00.1) module loaded.
    I: [pulseaudio] (alsa-lib)utils.c: could not open configuration file /usr/share/alsa/ucm/USB Camera-B4.09.24.1/USB Camera-B4.09.24.1.conf
    I: [pulseaudio] (alsa-lib)parser.c: error: could not parse configuration for card USB Camera-B4.09.24.1
    I: [pulseaudio] (alsa-lib)main.c: error: failed to import USB Camera-B4.09.24.1 use case configuration -2
    I: [pulseaudio] alsa-ucm.c: UCM not available for card USB Camera-B4.09.24.1
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:2: Invalid argument
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:front:2: Invalid argument
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:2: Invalid argument
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:iec958:2: Invalid argument
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hw:2: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device front:2: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hw:2: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround21:2: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround40:2: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround41:2: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround50:2: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround51:2: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround71:2: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:2: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:2
    I: [pulseaudio] alsa-util.c: Error opening PCM device a52:2: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:2
    I: [pulseaudio] alsa-util.c: Error opening PCM device a52:2: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:2
    I: [pulseaudio] alsa-util.c: Error opening PCM device dca:2: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2
    I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.1:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,1
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,1: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.1:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,1
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,1: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.1:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,1
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,1
    I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,1: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.2:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,2
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,2: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.2:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,2
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,2: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.2:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,2
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,2: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,2
    I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,2: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.3:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,3
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,3: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.3:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,3
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,3: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.3:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,3
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,3: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,3
    I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,3: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.4:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,4
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,4: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.4:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,4
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,4: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.4:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,4
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,4: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,4
    I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,4: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.5:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,5
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,5: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.5:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,5
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,5: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.5:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,5
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,5: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,5
    I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,5: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.6:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,6
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,6: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.6:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,6
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,6: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.6:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,6
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,6: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,6
    I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,6: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.7:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,7
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,7: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.7:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,7
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,7: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.7:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,7
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,7: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,7
    I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,7: No such file or directory
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Device hw:2 doesn't support 44100 Hz, changed to 16000 Hz.
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hw:2: No such file or directory
    I: [pulseaudio] module-card-restore.c: Restoring port latency offsets for card alsa_card.usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241.
    I: [pulseaudio] card.c: Created 1 "alsa_card.usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241"
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Device hw:2 doesn't support 44100 Hz, changed to 16000 Hz.
    I: [pulseaudio] alsa-source.c: Successfully opened device hw:2.
    I: [pulseaudio] alsa-source.c: Selected mapping 'Multichannel' (multichannel).
    I: [pulseaudio] alsa-source.c: Cannot enable timer-based scheduling, falling back to sound IRQ scheduling.
    I: [pulseaudio] alsa-source.c: Successfully enabled mmap() mode.
    W: [pulseaudio] alsa-util.c: Unable to load mixer: Invalid argument
    I: [pulseaudio] alsa-source.c: Failed to find a working mixer device.
    I: [pulseaudio] source.c: Created source 1 "alsa_input.usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241.multichannel" with sample spec s16le 4ch 16000Hz and channel map front-left,front-right,rear-left,rear-right
    I: [pulseaudio] source.c: alsa.resolution_bits = "16"
    I: [pulseaudio] source.c: device.api = "alsa"
    I: [pulseaudio] source.c: device.class = "sound"
    I: [pulseaudio] source.c: alsa.class = "generic"
    I: [pulseaudio] source.c: alsa.subclass = "generic-mix"
    I: [pulseaudio] source.c: alsa.name = "USB Audio"
    I: [pulseaudio] source.c: alsa.id = "USB Audio"
    I: [pulseaudio] source.c: alsa.subdevice = "0"
    I: [pulseaudio] source.c: alsa.subdevice_name = "subdevice #0"
    I: [pulseaudio] source.c: alsa.device = "0"
    I: [pulseaudio] source.c: alsa.card = "2"
    I: [pulseaudio] source.c: alsa.card_name = "USB Camera-B4.09.24.1"
    I: [pulseaudio] source.c: alsa.long_card_name = "OmniVision Technologies, Inc. USB Camera-B4.09.24.1 at usb-0000:00:1d.0-1.2, hi"
    I: [pulseaudio] source.c: alsa.driver_name = "snd_usb_audio"
    I: [pulseaudio] source.c: device.bus_path = "pci-0000:00:1d.0-usb-0:1.2:1.1"
    I: [pulseaudio] source.c: sysfs.path = "/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/sound/card2"
    I: [pulseaudio] source.c: udev.id = "usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241"
    I: [pulseaudio] source.c: device.bus = "usb"
    I: [pulseaudio] source.c: device.vendor.id = "1415"
    I: [pulseaudio] source.c: device.vendor.name = "Nam Tai E&E Products Ltd. or OmniVision Technologies, Inc."
    I: [pulseaudio] source.c: device.product.id = "2000"
    I: [pulseaudio] source.c: device.product.name = "Sony Playstation Eye"
    I: [pulseaudio] source.c: device.serial = "OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1"
    I: [pulseaudio] source.c: device.string = "hw:2"
    I: [pulseaudio] source.c: device.buffering.buffer_size = "12792"
    I: [pulseaudio] source.c: device.buffering.fragment_size = "3192"
    I: [pulseaudio] source.c: device.access_mode = "mmap"
    I: [pulseaudio] source.c: device.profile.name = "multichannel"
    I: [pulseaudio] source.c: device.profile.description = "Multichannel"
    I: [pulseaudio] source.c: device.description = "Sony Playstation Eye Multichannel"
    I: [pulseaudio] source.c: module-udev-detect.discovered = "1"
    I: [pulseaudio] source.c: device.icon_name = "audio-card-usb"
    I: [pulseaudio] alsa-source.c: Using 4.0 fragments of size 3192 bytes (24.94ms), buffer size is 12792 bytes (99.94ms)
    I: [alsa-source-USB Audio] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
    I: [alsa-source-USB Audio] alsa-source.c: Starting capture.
    I: [pulseaudio] module.c: Loaded "module-alsa-card" (index: #7; argument: "device_id="2" name="usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241" card_name="alsa_card.usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"").
    I: [pulseaudio] module-udev-detect.c: Card /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/sound/card2 (alsa_card.usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241) module loaded.
    I: [pulseaudio] module-udev-detect.c: Found 3 cards.
    I: [pulseaudio] module.c: Loaded "module-udev-detect" (index: #5; argument: "").
    I: [pulseaudio] module.c: Loaded "module-esound-protocol-unix" (index: #8; argument: "").
    I: [pulseaudio] module.c: Loaded "module-native-protocol-unix" (index: #9; argument: "").
    I: [pulseaudio] module.c: Loaded "module-default-device-restore" (index: #10; argument: "").
    I: [pulseaudio] module.c: Loaded "module-rescue-streams" (index: #11; argument: "").
    I: [pulseaudio] module.c: Loaded "module-always-sink" (index: #12; argument: "").
    I: [pulseaudio] module.c: Loaded "module-intended-roles" (index: #13; argument: "").
    I: [pulseaudio] module.c: Loaded "module-suspend-on-idle" (index: #14; argument: "").
    I: [pulseaudio] module.c: Loaded "module-console-kit" (index: #15; argument: "").
    I: [pulseaudio] client.c: Created 0 "Login Session c2"
    I: [pulseaudio] module.c: Loaded "module-systemd-login" (index: #16; argument: "").
    I: [pulseaudio] module.c: Loaded "module-position-event-sounds" (index: #17; argument: "").
    I: [pulseaudio] module.c: Loaded "module-role-cork" (index: #18; argument: "").
    I: [pulseaudio] module.c: Loaded "module-filter-heuristics" (index: #19; argument: "").
    I: [pulseaudio] module.c: Loaded "module-filter-apply" (index: #20; argument: "").
    E: [pulseaudio] ltdl-bind-now.c: Failed to open module module-equalizer-sink.so: module-equalizer-sink.so: cannot open shared object file: No such file or directory
    E: [pulseaudio] module.c: Failed to open module "module-equalizer-sink".
    E: [pulseaudio] main.c: Module load failed.
    E: [pulseaudio] main.c: Failed to initialize daemon.
    I: [pulseaudio] module.c: Unloading "module-filter-apply" (index: #20).
    I: [pulseaudio] module.c: Unloaded "module-filter-apply" (index: #20).
    I: [pulseaudio] module.c: Unloading "module-filter-heuristics" (index: #19).
    I: [pulseaudio] module.c: Unloaded "module-filter-heuristics" (index: #19).
    I: [pulseaudio] module.c: Unloading "module-role-cork" (index: #18).
    I: [pulseaudio] module.c: Unloaded "module-role-cork" (index: #18).
    I: [pulseaudio] module.c: Unloading "module-position-event-sounds" (index: #17).
    I: [pulseaudio] module.c: Unloaded "module-position-event-sounds" (index: #17).
    I: [pulseaudio] module.c: Unloading "module-systemd-login" (index: #16).
    I: [pulseaudio] client.c: Freed 0 "Login Session c2"
    I: [pulseaudio] module.c: Unloaded "module-systemd-login" (index: #16).
    I: [pulseaudio] module.c: Unloading "module-console-kit" (index: #15).
    I: [pulseaudio] module.c: Unloaded "module-console-kit" (index: #15).
    I: [pulseaudio] module.c: Unloading "module-suspend-on-idle" (index: #14).
    I: [pulseaudio] module.c: Unloaded "module-suspend-on-idle" (index: #14).
    I: [pulseaudio] module.c: Unloading "module-intended-roles" (index: #13).
    I: [pulseaudio] module.c: Unloaded "module-intended-roles" (index: #13).
    I: [pulseaudio] module.c: Unloading "module-always-sink" (index: #12).
    I: [pulseaudio] module.c: Unloaded "module-always-sink" (index: #12).
    I: [pulseaudio] module.c: Unloading "module-rescue-streams" (index: #11).
    I: [pulseaudio] module.c: Unloaded "module-rescue-streams" (index: #11).
    I: [pulseaudio] module.c: Unloading "module-default-device-restore" (index: #10).
    I: [pulseaudio] module.c: Unloaded "module-default-device-restore" (index: #10).
    I: [pulseaudio] module.c: Unloading "module-native-protocol-unix" (index: #9).
    I: [pulseaudio] module.c: Unloaded "module-native-protocol-unix" (index: #9).
    I: [pulseaudio] module.c: Unloading "module-esound-protocol-unix" (index: #8).
    I: [pulseaudio] module.c: Unloaded "module-esound-protocol-unix" (index: #8).
    I: [pulseaudio] module.c: Unloading "module-alsa-card" (index: #7).
    I: [pulseaudio] source.c: Freeing source 1 "alsa_input.usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241.multichannel"
    I: [pulseaudio] card.c: Freed 1 "alsa_card.usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241"
    I: [pulseaudio] module.c: Unloaded "module-alsa-card" (index: #7).
    I: [pulseaudio] module.c: Unloading "module-alsa-card" (index: #6).
    I: [pulseaudio] sink.c: Freeing sink 0 "alsa_output.pci-0000_01_00.1.hdmi-stereo"
    I: [pulseaudio] source.c: Freeing source 0 "alsa_output.pci-0000_01_00.1.hdmi-stereo.monitor"
    I: [pulseaudio] card.c: Freed 0 "alsa_card.pci-0000_01_00.1"
    I: [pulseaudio] module.c: Unloaded "module-alsa-card" (index: #6).
    I: [pulseaudio] module.c: Unloading "module-udev-detect" (index: #5).
    I: [pulseaudio] module.c: Unloaded "module-udev-detect" (index: #5).
    I: [pulseaudio] module.c: Unloading "module-switch-on-port-available" (index: #4).
    I: [pulseaudio] module.c: Unloaded "module-switch-on-port-available" (index: #4).
    I: [pulseaudio] module.c: Unloading "module-augment-properties" (index: #3).
    I: [pulseaudio] module.c: Unloaded "module-augment-properties" (index: #3).
    I: [pulseaudio] module.c: Unloading "module-card-restore" (index: #2).
    I: [pulseaudio] module.c: Unloaded "module-card-restore" (index: #2).
    I: [pulseaudio] module.c: Unloading "module-stream-restore" (index: #1).
    I: [pulseaudio] module.c: Unloaded "module-stream-restore" (index: #1).
    I: [pulseaudio] module.c: Unloading "module-device-restore" (index: #0).
    I: [pulseaudio] module.c: Unloaded "module-device-restore" (index: #0).
    I: [pulseaudio] main.c: Daemon terminated.
    When I start pavucontrol I get this:
    Can someone help me correct what the issue is, please let me know if you need more information.
    Thanks in advance.
    Last edited by Dobbie03 (2015-05-15 20:35:02)

    I tried "pulseaudio" in the terminal and get the following:
    W: [pulseaudio] alsa-util.c: Unable to load mixer: Invalid argument
    E: [pulseaudio] ltdl-bind-now.c: Failed to open module module-equalizer-sink.so: module-equalizer-sink.so: cannot open shared object file: No such file or directory
    E: [pulseaudio] module.c: Failed to open module "module-equalizer-sink".
    E: [pulseaudio] main.c: Module load failed.
    E: [pulseaudio] main.c: Failed to initialize daemon.

  • Scripting QTP to start a new Audio Capture

    I'm trying to find a way to have QTPro open and start recording an audio capture at a preprogrammed time of day.
    Sort of a audio DVR if you will.
    What app do you think I can use that has a clock I can link to QT?
    Thanks

    Audio HiJack was the answer.

  • Capture Audio which can be heard from speakers..

    Hi..
    I am currently facing a problem in capturing audio which can be heard from the speakers.. i.e. i want to capture audio generated by other applications. Till now I have been successful in capturing audio from microphone using JMF and Java Sound too.. But I fail to understand what capture device should I use to capture internal sound i.e. sound generated by other applications.. pls. help me out regarding this.. Can DirectSoundCapture (capture device) be used to capture such sounds or can it just capture sounds from microphone..? Pls. help me soon.. Thanks in advance :)

    hardware issue read more here
    https://discussions.apple.com/thread/1343532?start=315&tstart=0
    more hits
    https://www.google.dk/search?client=opera&q=iphone+stuck+in+headphone+mode&sourc eid=opera&ie=utf-8&oe=utf-8&channel=suggest

  • ThinkPad E545 - After Win 8.1 update: Can't start Dolby Audio ...

    I have just updated my ThinkPad E545 to Windows 8.1 today.  Every time after computer boots up, I get an Error message starting like "Dolby Advanced Audio - Can't start Dolby Audio. If this problem will stay restart the computer. I have Czech Wins that's why it should be little bit different. After restart the computer the note is there again. I found discussion where are helps like Uninstall Conexant, restart and then Install again. But the problem is still there. Maybe I do some mistake. Can anyone help me?

    hi Sperl19,
    Welcome to Lenovo Community Forums!
    Your Dolby may not be synced with the Audio driver after the update,
       Since Audio driver may had been updated by the 8.1 but not the Dolby app.
    Here's what to do:
    Open Device Manager 
        Uninstall the Audio Device Under Audio inputs and outputs
                Then proceed to Control Panel / Programs / Uninstall a Program
                         Uninstall all Dolby Related programs
                                 Restart if Prompted
    Now install this software driver
     Conexant Audio Driver
    Now open Drive C: on the upper right hand side of the screen you will find a Search pane
         Type in "aa" and hit search
    You should find 1 of the result as dolby or if not post a screen shot of the results here
    If ever you found it install that and it should bring your dolby back
    Hope this helps
    Cheers!
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Hey ppl,my macbook is not booting and by that i mean u can hear the audio wave when its starting up,the screen goes white and then after a while there's a folder with a question mark in the middle of the screen...anyone,any ideea?!?

    Hey ppl,my macbook is not booting and by that i mean u can hear the audio wave when its starting up,the screen goes white and then after a while there's a folder with a question mark in the middle of the screen...anyone,any ideea?!?Regards.

    That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the hard drive data is somehow corrupted.
    Put your install DVD into the drive and reboot. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the optical drive.
    Once it has finished booting and you are at the Install screen launch Disk Utility from the Utilities menu. Is your Hard Drive in the list on the left?
    If it is then select the First Aid Tab run Repair Disk and if that repairs any problems run it again until the green OK appears and then run Repair Permissions.
    If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

  • I can't start an audio or video in ichat 6 on Lion

    I chat used to work for me.  Now I can't start up audio or video chats.
    The error message I get is
    "iChat can’t start the audio chat."
    "Your computer is busy in another chat."
    I have tried the following
    restart ichat
    reinstall ichat
    remove ~/Library/Preferences/com.apple.iChat*
    I am using gtalk as my account.
    Any help would be awesome
    Nathan

    Hi,
    In Snow Leopard iChat and Face Time could be open at the same time and in fact use the camera (and or mic) at the same time.
    I am not sure this is possible in Lion so I would launch Face Time and check that it is Off in the Preferences.
    Although deleting all the com.apple.ichat  .plists is excessive it should have closed any Open Chat (or what it thought was open) when you restarted.  (Although you don't say you have restarted iChat since deleting them)
    However there is one setting that may have upset this.
    In System Preference > General Pane (Used to be the Appearance pane) is a check box to Cause any Open window on Quit to be reopened on any app launch.
    If any window is Minimised to the DOCK that is where it is put back.  (If it is trying to reconnect an audio or Video Chat this may be an Invite window)
    As iChat can do Video and Audio Chats Peer-to-Peer it is pointless deleting com.apple.ichat.AIM.plist or the Jabber one or in fact the Yahoo one as once a chat is started you can log out of the relevant Buddy List (Make that Account Off Line).
    It is possible that this a a new style Message in Lion to Say "Your Camera/Mic is in use in another application"
    As Reinstalling (Hopefully iChat 6) and deleting all the .plist  and then restarting should have given you a clean slate, as it were, it is difficult to see what the issue could be or what to suggest next.
    10:41 PM      Thursday; August 11, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • DigiVox A/D - Cannot render audio capture

    Hello, i have DigiVOX A/D. I configured it and I can watch TV. But when I try to capture it, there is a "Cannot render audio capture" message. I tried a lot of parameters changes but nothing helped. Can you please help?
    Juso

    So I did some more testing. Now it works this way:
    I can watch TV and it works OK. When I click capture it doesn't work and it writes error message "Cannot render audio capture". I go to settings and setup to capture only audio. I try to capture. I do some more modifications. It still doesn't work. But on some point of configuration (I could't find exaxtly when) the sound stops during watching. And if I try to capture at that time, it captures OK with audio and video. It doesn't matter whether I use Mpeg 2 or Mpeg 4. Both works. So I think codecs are OK. And it works so (no audio during watching and good audio and video during capture) till I close the application. When I start it again, there is sound when watching and error when clicking capture button. And again I can do some settings modification (random) and after some config steps it start capture but stops audio while watching.

  • Audio glitches at the start of video

    Hello,
    i have a few audio glitches at the start of the video.
    This happens only at the start of the video, at the first 30-40 sec, where there is a music soundtrack.
    I am using encore 2.0 and a portable HP Pavilion dv4000.
    The video was coming from a dv tape that was captured with windows movie maker as avi and imported as avi to encore.
    But the sound was changed to 48 khz, at the edit (Avid).
    Please i need your help.

    Neil,
    Thanks for the response. I started looking for Audioblack in the New Asset list, the Transitions and Effects, all through Audition, manuals, Internet, everything, and about all that I found was reference to an indie band - "Audioblack," or comments attributed to you. I have a lot of material from Dolby, from when I first began using 5.1 Surround in DVDs, but did not see this term there. It was probably in some of their more technical papers, and not the "primer" course ones, that I already had. You very clearly pointed out *what* the problem was likely to be, but I wanted clarification as to the exact solution. You cleared that up beautifully.
    Based on one of your earlier replies along these lines, I instituted a 2 sec. gap in my Audio Tracks at the beginning of all Timelines, as part of my workflow - 2 sec. Black Video, Dip to Black to 1st Title, and silence on my Audio Track, but was becoming worried, that I needed to create an actual Audio Clip with certain properties. I see that my interpretation of Audioblack works.
    I had not encountered the problems, that some others had, but then my test DVD players are all higher-end Marantz units, and who knows what a client is likely to try and play the DVDs on? I wanted to establish a workflow, that would give me the greatest chance of success, regardless of the hardware. Thanks to you, and to others, I am honing my workflow, as well as I can.
    I think, based on some other responses, that involve hardware, that I will dig up a very old, and cheap Panasonic DVD from my gym, to use as a test machine - doesn't get much older, or cheaper, than that.
    Greatly appreciated,
    Hunt
    PS I still use an older Cambridge as the rear-channel amp out of my Carver C-400 pre. Great unit and still going strong!

  • NO audio capture when importing imovie to FCE

    I am following the Apple tutorials to get me started on FCE, but have fallen down at the 1st hurdle.
    When I import a saved XML file from imovie into FCE there is no audio capture.
    I am getting the video/clip audio but I have added music from itunes to my imovie's as well and nothing seems to be coming across I just get a red line across the top of the clips and a bleeping noise.
    Anyone have any ideas?.
    Thanks

    Hi there,
    This "red line" and "bleeping noise" are generally signs that the audio does not match your sequence within FCE. FCE can only edit natively AIFF files at either 48kHz or 32kHz. Music from iTunes is not AIFF, so FCE needs to render out the audio to play it.
    So here's what I'd do:
    1. Click Option-R to render everything out. Chances are this may solve your problem.
    2. If this doesn't help, it may be because it is iTunes music and FCE doesn't let you use copyrighted material. For a way around this issue, look over this link:
    http://fcpbook.com/Audio4.html

  • Problems with Roxio Spin Doctor audio capture

    I recently purchased Roxio Toast Titanium 10, which includes Spin Doctor 6 (version 5.0.4). I am trying to use it to capture audio streaming as described in the Spin Doctor User Guide, but continue to have problems. I have repeatedly contacted Roxio with little success. Most recently they had me provide a copy of my System Profiler file and "escalated" the issue. Only result was that I was told to uninstall and reinstall Toast 10. I did that but the problems persist. Here's my report back to Roxio, which explains the problem. I'm wondering if anyone here has encountered this problem or has suggestions on how to proceed.
    Bottom line is that I cannot capture streamed audio, as Spin Doctor documentation says I should. I'm guessing this has something to do with the Audio Capture Support program within Spin Doctor, but I can't find out what's wrong.
    Here's the description I provided Roxio: +I uninstalled the software and re-installed it per your instructions. Once in Spin Doctor I also installed Audio Capture Support, closed Spin Doctor, and re-opened it. The Start Auto Music Capture button was active. Following the instructions in your Spin Doctor User Guide (page 22) I went selected "start a new recording" and selected various parameters. CDSD Audio Capture was one of the input options. I clicked on the "start" button and immediately got an error message. After that the Auto Music Capture button was no longer active and CDSD audio capture was no longer one of the input options.+

    UPDATE: I again uninstalled everything and reinstalled. I did not install the Auto Capture Support feature in Spin Doctor. I was able to successfully record from an internet stream, saved it, and then started another recording. After the second recording I quit Spin Doctor and re-opened it. Now I have the same problem as before: the Auto Capture button does not work and CDSD is not an input option. Back to the same situation as before. I tried quitting both Toast and Spin Doctor and re-opening them but it didn't make a difference.

  • Audio capture using AMS Standard

    I'm trying to capture audio from a mic and save on an AMS server running AMS Standard.
    I can make a connection without problems with "rtmp://server_name/live", but when I try to start recording audio with
      mic = Microphone.getMicrophone();
      mic.rate = 44;
      mic.gain = 100;
      mic.setSilenceLevel(0);
      try {
            nsPublish = new NetStream(nc);
            nsPublish.addEventListener(NetStatusEvent.NET_STATUS, netStatus);
            nsPublish.attachAudio(mic);
            nsPublish.publish("recordTest", "record");
       } catch(error:Error) {
           setStatus(error.toString());
           return;
    I get the following error: Application doesn't have permissions for server-side record/append of streams; access denied to stream recordTest.
    Can anyone tell me why and how to fix it?
    Thank you!

    Ah, yes, that works! Thank you.
    A follow-up question: When audio capture is stopped, how can the client program find out when all the audio data has been written to a file on the server. The client needs to know this to perform subsequent operations on the audio file.

  • Merging and saving audio capture + file from disk

    Hi,
    I need to combine an audio file (read from disk) with an audio capture from a microphone and save the combined audio to a file.
    I created processors for both, merged the data sources and created a processor from the merged data source.
    If I use that as an input to a player, it seems to play OK : I hear the combination of the audio file and the microphone over the speakers (albeit with a delay of the microphone input).
    But when I try to save this merged processor's data source (I tried 2 different ways based on samples I found) I get the following exceptions respectively
    writeToFile
    javax.media.NoDataSinkException: Cannot find a DataSink for: com.sun.media.multiplexer.RawBufferMux$RawBufferDataSource@121cc40
         at javax.media.Manager.createDataSink(Manager.java:1894)
         at soundTest.MergeTest4.writeToFile(MergeTest4.java:108)
         at soundTest.MergeTest4.runTest(MergeTest4.java:70)
         at soundTest.MergeTest4.main(MergeTest4.java:207)
    writeToFile2:
    Unable to handle format: LINEAR, 44100.0 Hz, 16-bit, Stereo, LittleEndian, Signed
    Unable to handle format: LINEAR, 44100.0 Hz, 16-bit, Stereo, LittleEndian, Signed, 176400.0 frame rate, FrameSize=32 bits
    Failed to realize: com.sun.media.ProcessEngine@691f36
    Error: Unable to realize com.sun.media.ProcessEngine@691f36
    javax.media.CannotRealizeException
         at javax.media.Manager.blockingCall(Manager.java:2005)
         at javax.media.Manager.createRealizedProcessor(Manager.java:914)
         at soundTest.MergeTest4.saveFile(MergeTest4.java:83)
         at soundTest.MergeTest4.runTest(MergeTest4.java:71)
         at soundTest.MergeTest4.main(MergeTest4.java:208
    Here's the code (apologies for heavy use of static and poor error handling)
    public class MergeTest4 {
           private static final Format AUDIO_FORMAT = new AudioFormat(AudioFormat.LINEAR);
           private static final int TIME_OUT = 2000;
         private static void runTest() throws Exception {
           DataSource ds1 = getCaptureDataSource();
           DataSource ds2 = Manager.createDataSource(new URL("file:///c:/temp/test.wav"));
           Processor processor1 = Manager.createProcessor(ds1);          
           Processor processor2 = Manager.createProcessor(ds2);  
           configureAndStart(processor1);
           configureAndStart(processor2);
           DataSource[] sources = { processor1.getDataOutput(), processor2.getDataOutput()};
           DataSource mergedDS = Manager.createMergingDataSource(sources);
           Processor mergedProcessor = Manager.createProcessor(mergedDS);    
           configureAndStart(mergedProcessor);
            //This works
            Player player = Manager.createRealizedPlayer(mergedProcessor.getDataOutput());
             player.start();          
             //This does not work
             //  writeToFile(mergedProcessor);
             //  writeToFile2(mergedProcessor);
        private static void writeToFile2(Processor processor) throws Exception {
              ProcessorModel outputPM = new ProcessorModel(processor.getDataOutput(),
                    new Format[]{ new AudioFormat(AudioFormat.LINEAR)},
                    new FileTypeDescriptor(FileTypeDescriptor.WAVE)
            MediaLocator dest = new MediaLocator("file://./rec.wav");
            Processor outputProcessor = Manager.createRealizedProcessor(outputPM);
            DataSource newDS = outputProcessor.getDataOutput();
            newDS.connect();
            newDS.start();
            DataSink dataSink = Manager.createDataSink(newDS, dest);
            dataSink.open();
            dataSink.start();
          //  dataSink.addDataSinkListener(this);
            outputProcessor.start();
         private static void writeToFile(Processor processor) throws Exception {
              StateHelper sh = new StateHelper(processor);
              if (!sh.realize(10000)) {
                   System.exit(-1);
               processor.setContentDescriptor(new FileTypeDescriptor(FileTypeDescriptor.WAVE));
               MediaLocator dest = new MediaLocator("file://c:/temp/foo.wav");
               DataSink filewriter = Manager.createDataSink(processor.getDataOutput(), dest);
               filewriter.open();
               StreamWriterControl swc = (StreamWriterControl) processor.getControl("javax.media.control.StreamWriterControl");
               //set limit to 5MB
               if (swc != null) {
                   swc.setStreamSizeLimit(5000000);
               try {
                   filewriter.start();
               } catch (IOException e) {
                   System.exit(-1);
               // Capture for 20 seconds
               sh.playToEndOfMedia(20000);
               sh.close();
               filewriter.close();
         private static DataSource getCaptureDataSource() {
              try {
                   Vector captureDevices = CaptureDeviceManager.getDeviceList(AUDIO_FORMAT);
                    CaptureDeviceInfo audiocaptureDevice=null;
                    if (captureDevices.size() > 0) {
                         audiocaptureDevice = (CaptureDeviceInfo) captureDevices.get(0);
                    } else {
                         System.out.println("Can't find suitable audio capture device.");
                        return null;
                    return Manager.createDataSource(audiocaptureDevice.getLocator());
              } catch (Exception ex) {
                   ex.printStackTrace();
              return null;
         private static void start(Player player) {
              player.start();
              waitForState(player, Processor.Realized);
         private static void configure(Processor p) {
              p.configure();
              waitForState(p, Processor.Configured);
         private static void configureAndStart(Processor p) {
              p.configure();
              waitForState(p, Processor.Configured);
              start(p);
         private static void waitForState(Player player, int state) {
             if (player.getState() == state) {
                 return;
             long startTime = new Date().getTime();
             final Object waitListener = new Object();
             ControllerListener cl = new ControllerListener() {
                 @Override
                 public void controllerUpdate(ControllerEvent ce) {
                     synchronized (waitListener) {
                         waitListener.notifyAll();
             try {
                 player.addControllerListener(cl);
                 synchronized (waitListener) {
                     while (player.getState() != state && new Date().getTime() - startTime < TIME_OUT) {
                         try {
                             waitListener.wait(500);
                         } catch (InterruptedException ex) {
                             ex.printStackTrace();
             } finally {
                 player.removeControllerListener(cl);
         Any idea what needs to be changed for this to work?
    Thanks
    Philippe

    Drew
    Now that you've got as far as doing GUIs, you must learn to read the API. Here/s a link.
    Is it something like: out.textBox.text() ??
    Not quite. In fact, not at all. The syntax implies that out has a member textBox which in turn has a method text. That's pretty far removed from reality, isn't it?
    From the code you posted, you apparently know that out.println(...) takes a String parameter. Now go look up the API and find a method of JTextField that returns a String, that Returns the text contained in this TextComponent.
    ^Hint: it's a method inherited from JTextComponent^
    Get the text from the JTextField and pass it as a parameter to out.println. That's all there is to it.
    luck, db
    Blasted multiposter didn't have the decency to indicate here that the immediate problem was resolved, just went ahead and started a [new thread|http://forum.java.sun.com/thread.jspa?threadID=5282987].
    One for the little black book.
    Edited by: Darryl.Burke

  • Audio Capture from DV Tape

    I've reviewed many posts here about audio capture but, I am unable to figure out what the "trick" is to capturing audio alone with the video using the new iMovie. I'm connected via Firewire and I'm able to view the video in capture mode but, I hear no sound. I've checked iMovie Preferences and System Preferences and everything seems to be OK there.
    Is this the way this new version of this program functions? I wish I didn't have to post a msg here because, I'm trying to read the previous post and trying anything that seems to pertain to my issue without the desired results.
    Can someone please shed some light on what's going on with this function of this program?

    I assume you are wanting to hear the audio as you are importing and not that you have no audio once it is imported.
    imovie 08 doesn't play audio while importing. While you are using tape (that imports in real time) imovie now imports from a variety of different types of camera such as AVCHD (which isn't imported at real time. Therefore it is no longer logical to playback audio on import.

Maybe you are looking for

  • Why am i being charged dollars when i did not buy anything!

    why am i being charged ($1.05 on several occations ) when i did not buy anything, just downloaded free apps and sometimes i have updated few of those free apps. all i see is charges our of no where! it doesn't happen every time i do a free download (

  • Windows 7 Home Premium with 802.1x problems with the Authentication

    We have problems with  OS Windows 7 Home Premium 802.1x, the message in ACS: EAP-TLS or PEAP authentication failed during SSL handshake ACS v4.1 We have OS Windows 7 Professional and doesn´t have problems with the authentication. I hope that you can

  • Streamline process

    I am changing the end tag on DVDs used for broadcast on Public Access Television. Right now the process is downloading the DVD which creates a .dmg file. Next, I convert the .dmg to Quicktime using MPEG streamslip. I load the converted Quicktime file

  • DW8 changes to &gt; in templated page (Outside HTML)

    SOLVED: One of the Code Rewriting preferences is 'Encode <,>, &, and " in attribute values using &' which appears to be the reason for this. I am trying to update a template whose children have code before the HTML tag (on some pages) and when I do i

  • Hi ,Query on Landscape.

    Hi Team, Would appreciate your reply on this... While deciding on the landscape during Preparation phase we realize that we would have 3tier landscape with DEV, QAR ,PROD  servers. Are these 3 different servers with R3 installed separately into it in