MS Access bug executing an insert ?

Hi,
There is a strange problem with MS Access: it doesn't execute the last executeUpdate() sentence you write.
If I code, let's say, 10 executeUpdates(), the last one is not inserted into the database. It's not a problem with the code (if I change the order of them, it's always the last) and certainly not a problem regarding closing the statement, or performing commit. I've tested it with a simple SQL sentences, where each one uses a single table.
If I try to execute the last executeUpdate() twice, I get an exception the second time (this is ok) but it gets inserted.
Has anyone faced a problem like this ? (Several months ago, someone told me to use another database -like HSQL- instead of Access. I sincerely regret not to have followed his advice)
Regards,

Right, it's not a bug.
You have to close the connection or execute another SQL command with it to see INSERT/UPDATE/DELETE take effect in the database. it's a well-known idiom.
%

Similar Messages

Failed to execute the insert command

I have a sign up training calendar that runs on sharepoint 2010, over the weekend i went to install the latest cumulative update http://support.microsoft.com/kb/2817552 and it seems to have broken the signup process. Whenever some goes to sign up for an
event they see the following error what can i do to fix this?
Error
The data source control failed to execute the insert command. d8b915be-5355-4d63-97bb-c9cf3aacad75
Web Parts Maintenance Page: If you have permission, you can use this page to temporarily close Web Parts or remove personal settings. For more information, contact your site administrator.
Troubleshoot issues with Microsoft SharePoint Foundation.
Correlation ID: d8b915be-5355-4d63-97bb-c9cf3aacad75
the error occurs when someone tries to add an event in the calendar & this issues seems to be across the entire sharepoint 2010 foundation farm. How can i resolve this without rebuilding the farm?

Hi, We are having the same issue. Did anyone get a solution for this? I tried following solution.
open
the page with SPD and update this value.
OLD: <SharePoint:SPDataSource
runat="server" DataSourceMode="List"
NEW: <SharePoint:SPDataSource
runat="server" DataSourceMode="ListItem"
That gives me "Access Denied" error.
User has contribute permission
for the list.
Any solution???

Custom SharePoint 2010 designer page throws "The data source control failed to execute the insert command" exception while adding the new item after the August 13, 2013 CU has installed

We have the SharePoint Server 2010 with SP1 environment on which the custom SP2010 designer pages were working as expected before the
August 13, 2013 CU has installed. But, getting the below exception while trying to add the new item after the CU has installed.
Error while executing web part: System.NullReferenceException: Object reference not set to an instance of an object.     at Microsoft.SharePoint.WebControls.SPDataSourceView.ExecuteInsert(IDictionary values)     at
System.Web.UI.DataSourceView.Insert(IDictionary values, DataSourceViewOperationCallback callback) 3b64c3a0-48f3-4d4a-af54-d0a2fc4553cc
06/19/2014 16:49:37.65 w3wp.exe (0x1240)                       0x1300 SharePoint Foundation
Runtime                       tkau Unexpected Microsoft.SharePoint.WebPartPages.DataFormWebPartException: The data source control
failed to execute the insert command. 3b64c3a0-48f3-4d4a-af54-d0a2fc4553cc    at Microsoft.SharePoint.WebPartPages.DataFormWebPart.InsertCallback(Int32 affectedRecords, Exception ex)     at System.Web.UI.DataSourceView.Insert(IDictionary
values, DataSourceViewOperationCallback callback)     at Microsoft.SharePoint.WebPartPages.DataFormWebPart.FlatCommit()     at Microsoft.SharePoint.WebPartPages.DataFormWebPart.HandleOnSave(Object sender, EventArgs e)
at Microsoft.SharePoint.WebPartPages.DataFormWebPart.RaisePostBackEvent(String eventArgument)     at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument)     at System.Web.UI.Page.ProcessRequestMain(Boolean
inclu... 3b64c3a0-48f3-4d4a-af54-d0a2fc4553cc
06/19/2014 16:49:37.65* w3wp.exe (0x1240)                       0x1300 SharePoint Foundation
Runtime                       tkau Unexpected ...deStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) 3b64c3a0-48f3-4d4a-af54-d0a2fc4553cc
I have tried changing the "DataSourceMode" as below, now the insert command is working, but update command is not working.
<SharePoint:SPDataSource runat="server" DataSourceMode="ListItem" />
Also, the lookup dropdown fields are displaying the value as "<a href="Daughterhttp://cpsp10/sites/Employees/_layouts/listform.aspx?PageType=4&ListId={8F62F444-FB6A-4F03-9522-C4696B45DCD1}&ID=10&RootFolder=*">Daughter</a>"
instead of only "Daughter".
Please provide the solution to get rid of this issue.
Thanks
Ramasubbu

Try below:
http://social.technet.microsoft.com/Forums/en-US/ae910269-3a0c-4506-844b-e8bc89d95b71/data-source-control-failed-to-execute-the-insert-command
http://blog.jussipalo.com/2012/01/sharepoint-2010-data-source-control.html
While there can be many causes for this generic error message, in my case the first parameter or ddwrt:DataBind function inside the SharePoint:FormFields element was
'i' and I was working with an Edit Form. Changing it to
'u' as it was with every other FormField fixed the issue.
<SharePoint:FormField runat="server" id="ff1{$Pos}" ControlMode="Edit" FieldName="Esittaja" __designer:bind="{ddwrt:DataBind('u',concat('ff1',$Pos),'Value','ValueChanged','ID',ddwrt:EscapeDelims(string(@ID)),'@Esittaja')}"
/>
Explanation:
DataBind operation type parameters (the first parameter) are listed below:
'i' stands for INSERT,
'u' stands for UPDATE,
'd' stands for DELETE.
http://webcache.googleusercontent.com/search?q=cache:d9HHY4I7omgJ:thearkfloats.blogspot.com/2014/03/sharepoint-2010-data-source-control.html+&cd=4&hl=en&ct=clnk&gl=in
If this helped you resolve your issue, please mark it Answered

BPM Scenario : " Error accessing table SXMS_AS_STATUS method: INSERT"

Hi all,
Webservice --> XI -->BW .
BPM has been used to send to send the response back.
BPM :
start ->Receive(Request)> Transformation(Responsemap)>Send(SendtoR/3)->Send(Send Response) ---> stop.
We are getting the error as " The error is <SAP:Stack>Error accessing table SXMS_AS_STATUS method: INSERT</SAP:Stack>
There are some messages that Webservice sent and XI received them but this error occured during some process in XI. and this is causing some discrepancy in the data sent and received.
Any idea what might be the problem ? Is there anything which I need to change in the parameters to rectify this error?
-Deepthi.

Hi
Just check this note , can get some clue
SAP-Note 1124049
Regards
Abhishek

The data source control failed to execute the insert command

Hi,
We have installed SharePoint 2010 on Windows Server 2008 Enterprise Edition. We've started using the "Employee Training Scheduling and Materials" template that is available at
http://www.microsoft.com/government/en-us/campaigns/Pages/SharePoint-Templates.aspx. Till last friday (17th Oct,2013) everything was working fine, but after that we are getting an error "The data source failed to execute the insert command"
when I click on the "Save" button available on the Registrations.aspx. Could any one help me resolve this issue?
Kinldy revert if you need more details.
Though I see many posts regarding this, most of them are associated with Windows Server 2008 R2. So, most of the hot fixes mentioned there could not help me.
Your help me is greatly appreciated. Thanks for taking time to go through this post.
Thanks and Regards
Praveen.
Thanks and Regards Praveen.

I have the exact same problem. I updated the 2007 Employee training template to the 2010 version and then 2 months ago, presumably when our Sharepoint had the July 10th patch 14.0.7102.5004 applied, it all broke. An attempt to register for a class always
comes back with "Failure to execute insert command".
I tried changing the DateSourceMode from "ListItem" to "List" that gets rid of the error but does NOT update the registrations list.
Anyone have any success fixing this?

[Solved] Cannot access non-executable directories

After I copied some folders and files from CD I had permission denied trying to access as a normal user.
So I did
sudo chown -R doctor:users folder
sudo chmod -R 777 folder
After that, the folder and files became executable.
So, in directory Music/ I had some executable folders and files.
I thought I can make it all non-executable recursively...
sudo chmod -R -x Music/
And now it's non-executable.
But wait
[doctor@doctor ~]$ cd Music/
bash: cd: Music/: Permission denied
I cannot access non executable folders?!
After I make them executable again, I can access.
[doctor@doctor ~]$ chmod -R +x Music/
[doctor@doctor ~]$ cd Music/
[doctor@doctor Music]$
wtf?
Last edited by Doctor Drive (2010-09-15 12:55:44)

Didn't get how it works though..
But a way to solve is
chmod -R 775 Music
And for files...
find ./Music/ -type f -exec chmod 664 {} \;
Though still didn't get why must folders have different permissions...
Too much to study that chmod thing...
Last edited by Doctor Drive (2010-09-15 12:55:18)

How to execute these insert statements as a batch?

Hello,
I have these three insert sql statements which execute individually. I want to execute them as a batch:
sql = "Insert into FirstTable (MessageId, MsgDate, MsgTitle) values (?, ?, ?)";
insertStatement = connection.prepareStatement(sql);
insertStatement.setInt(1, jmsgid);
insertStatement.setString(2, jlogdate);
insertStatement.setString(3, jmsgtitle);
insertStatement.executeUpdate();
sql = "Insert into SecondTable (MessageId, MsgDate, MsgTitle) values (?, ?, ?)";
insertStatement = connection.prepareStatement(sql);
insertStatement.setInt(1, jmsgid);
insertStatement.setString(2, jlogdate);
insertStatement.setString(3, jmsgtitle);
insertStatement.executeUpdate();
sql = "Insert into ThirdTable (MessageId, MsgDate, MsgTitle) values (?, ?, ?)";
insertStatement = connection.prepareStatement(sql);
insertStatement.setInt(1, jmsgid);
insertStatement.setString(2, jlogdate);
insertStatement.setString(3, jmsgtitle);
insertStatement.executeUpdate();
I tried the following method, but something is wrong. Can somebody help with executing these inserts as a batch?
stmt = connection.createStatement(); // connection pool
sql = "Insert into FirstTable (MessageId, MsgDate, MsgTitle) values (?, ?, ?)";
insertStatement.setInt(1, jmsgid);
insertStatement.setString(2, jlogdate);
insertStatement.setString(3, jmsgtitle);
stmt.addBatch(sql);
sql = "Insert into SecondTable (MessageId, MsgDate, MsgTitle) values (?, ?, ?)";
insertStatement.setInt(1, jmsgid);
insertStatement.setString(2, jlogdate);
insertStatement.setString(3, jmsgtitle);
stmt.addBatch(sql);
sql = "Insert into ThirdTable (MessageId, MsgDate, MsgTitle) values (?, ?, ?)";
insertStatement.setInt(1, jmsgid);
insertStatement.setString(2, jlogdate);
insertStatement.setString(3, jmsgtitle);
stmt.addBatch(sql);
stmt.executeBatch();
Thank you,
Logan

Errr I can't for the life of me understand why you thought that would work. I am bit concerned about how you assembled this code... did you copy and paste and hope for the best?
It should be.....
1) Get a preparedStatement using your sql. Do this step once.
2) For each query you want to batch.... set each of the parameters and call addBatch. Call all this on the prepared statement.
3) Then call executeBatch on the prepared statement.
You do not need the other vanilla statement for anything.
One important thing to note. When you batch parameters for batch prepared statement execution you can only (hopefully obviously) batch for the same SQL query. You can't do one insert and another update in the same query. It has to be all the same query.. just different parameters. This won't effect what you are doing in the above but sometimes it confuses people and they get into trouble later so I thought I would mention it now.

Data source control failed to execute the insert command

I have a sign up training calendar that runs on sharepoint 2010, over the weekend i went to install the latest cumulative update http://support.microsoft.com/kb/2817552 and it seems to have broken the signup process. Whenever some goes to sign up for an
event they see the following error what can i do to fix this?
Error
The data source control failed to execute the insert command. d8b915be-5355-4d63-97bb-c9cf3aacad75
Web Parts Maintenance Page: If you have permission, you can use this page to temporarily close Web Parts or remove personal settings. For more information, contact your site administrator.
Troubleshoot issues with Microsoft SharePoint Foundation.
Correlation ID: d8b915be-5355-4d63-97bb-c9cf3aacad75
Date and Time: 7/31/2013 9:51:25 PM

0
Vote
Thanks!!!
It worked for me too

Execute multiple insertions?

Hello everyone,
i am using mysql database and what i need to do is this:
i have a simple text file with many insertions in sql. Is there a way to execute the insertions without having to read each statement from the file and execute it using stmt.executeUpdate()?
(Mysql does not have stored procedures)
Thanks

I guess i have to do that, but then another problem pops up. This is a sample code:
Connection C1 = DriverManager.getConnection("jdbc:mysql://localhost:3306/test?user=root");
C1.setAutoCommit(false);
Statement stmt1 = C1.createStatement();
stmt1.addBatch("INSERT INTO try1(data) VALUES(5);");
stmt1.addBatch("INSERT INTO try2(id, data) VALUES(1,2);");
stmt1.executeBatch();
C1.commit();
setAutoCommit throws exception and when i remove this code line, no exception is thrown but also no insertion is made.When i use executeUpdate() instead it works. What am i doing wrong? I am quite new to jdbc, so please help!
Thanks

Display Autonumber from Access Database when click insert button

I have an application that displays all the customers in my Access database. The primary key is an Autonumber that Access generates.
How can I display the autonumber that Access generates when I click my insert new record button?

The generated autonumber can be retrieved with a SELECT @@IDENTITY which is the same syntax as in SQLServer. When this statement is executed it is effectively asking for the last 'identity' value seen on the current connection which will be the ID of the row you just created with your INSERT statement.

How can an add-on like Firesheep access and execute an external program like Winpcap? Is that a security flaw in Firefox?

I have been reading about the Firesheep add-on that allows the user to hijack sessions of users on the network by stealing the cookie. I understand that to prevent any application from stealing the cookie, the cookie should not be passed by the site without SSL. However, my understanding of how Firesheep works is that it interfaces with Winpcap (a network sniffer). So my question is "How can an add-on execute an external program or operating system command like Winpcap?" Can any add-on do this and should I be extremely afraid of downloading any add-on because of the potential that it could have complete access to my system?

Hi Scott-L.
You asked a very good question and it turns out you're right.
However, one must be aware that download an Addon on another website that Mozilla may be dangerous. Indeed, the Addons found on the Addon Center are checked (roughly).
In addition, Firefox includes a blacklist that blocks addons identified as malicious.
More information here: [http://www.computerworld.com/s/article/9193420/Mozilla_No_kill_switch_for_Firesheep_add_on?taxonomyId=17&pageNumber=1]

Error while executing DB Insert statement in BPEL process

Hi Folks,
I am facing the below issue while trying to invoke a DB adapter for DB Insert from a BPEL process :
+file:/oracle/orasoa/bpel/domains/default/tmp/.bpel_ProvisionOrderASAPReqABCSImpl_1.0_50dd1595129e9bbb00560e31e7c18cef.tmp/DB_INS_ASAPResponse.wsdl [ DB_INS_ASAPResponse_ptt::insert(AsapResponseCollection) ] - WSIF JCA Execute of operation 'insert' failed due to: DBWriteInteractionSpec Execute Failed Exception.+
+insert failed. Descriptor name: [DBINSASAPResponse.AsapResponse].+
+; nested exception is:+
ORABPEL-11616
DBWriteInteractionSpec Execute Failed Exception.
+insert failed. Descriptor name: [DBINSASAPResponse.AsapResponse].+
+Caused by Exception [TOPLINK-6016] (Oracle TopLink - 10g Release 3 (10.1.3.3.0) (Build 070608)): oracle.toplink.exceptions.QueryException+
Exception Description: Objects or the database cannot be changed through a ServerSession. All changes must be done through a ClientSession's UnitOfWork.
Query: InsertObjectQuery(<AsapResponse 1-1272531 1-R9WJ />).
The same code runs fine when i invoke it again, without making any changes to the code.
Any pointers in this regard will be highly appreciated.

Doe this thread helps you:
Strange Toplink errors appearing
Are there any triggers behind the table? Wich version of the database you are using? Did you configure the JCA Adapter and remove the 'mcf.' settings in your BPEL wsdl process?
Marc
http://orasora.blogspot.com

Need to execute Long Insert (6000 characters)statement using dbms_sql.parse

I built an insert statement which is more than 6000 (six thousand) characters stored into two varchar2 variables. I need to execute the statement using dbms_sql.parse.
I tryed using dbms_sql.varchar2s variable and having no success.
Any ideas or examples?
Thanks
JK

6000 chars shouldn't be a problem.
What do you mean with no success?Did you get any error?
Any ideas or examples?See this thread
Re: execute immediate with a string longer than 32767

Preview bug - merging pdfs inserts wrong file

I have consistently been able to reproduce this bug. I often merge PDFs using Preview, by dragging a file from the Finder to Preview's thumbnail sidebar open to the document to which I am merging.
And what happens is that when I do that, the file that actually gets inserted is a file that I had previously done that operation with.
In other words:
I want to merge file A with file B, so I open file B with Preview, ensuring the thumbnail sidebar is visible. I drag file A from the Finder and drop it on top of file B's thumbnail. Hey Presto, the files are merged, and I save and close, and then delete file A from the Finder.
I then go to merge file C with file D. Repeating the process, when I drop file C from the Finder to the Preview sidebar, file A is what actually gets inserted into file D.
It's like it's cached and doesn't get overwritten by file C during the second process.

I haven't tried to reproduce the issue, but what happens if you quit and relaunch Preview before doing the second merge?

Query in an Access database executing a function defined in a module

Hi all,
I have an Access 2003 database in which some function is defined in a module.
I also have a query defined which calls this function with no problem.
Both the query and the function work well when the query is executed from Access.
But when I try to execute the same query from ColdFusion, I get an error claiming that the function is not defined.
Any Idea ?

I believe that UDFs in Access can only be run inside of the Access runtime environment, and cannot be called through the JDBC/ODBC bridge that ColdFusion is using.
-Carl V.

MS Access bug executing an insert ?

Similar Messages

Maybe you are looking for