Msi 6501 / KD7 Big Problem !!!

I've a Pc configured:
Case Atx 400w CE,  KD7 Master v. 1, bios update to last release (1.3), 2 Cpus Athlon Mp 1800+ boxed, 512 Mb DDr Nanya  Pc2100, Ati RAdeon 8500Le 64 Mb Ddr, 2 Hd Maxtor 40Gb Udma 100 / 7200rpm  (Primary/Slave), Pioneer DrvA03 (Sec. slave), Floppy.
Installed Win Xp Pro, Win2K (Sp2), WinMe, WIn98se failed to load and lock the system when I enter in Windows.
I changed Vga card with a GeForce Mx400, Matrox G550, Kyro II and Savage 4;
changed Ram with M-Tech and Samsung;
changed Hard Disks, and cables;
changed all it's possible but system doesn't run !!!
setted to "optimal settings" and "default settings" , disabled Usb Host, Onboard Soundcard...
Installed last drivers (chipset/Vga*others).
Nothing to do !!!!
Please Help Me !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
 :(  

Thanks for your reply but ...nothing to do !!!
I have installend one or two cpu's.
The problem is the Agp: when i set Agp to 1x/2x system boot but crash after many minutes (Lock, reboot etc). When I set Agp 4X system hang-up and lock after many seconds (if boot)
I've changed the power sup with a new 400W and the two CPU-coolers. and another mobo (same model)Nothing, nothing...
Another problem is that the DDRam (Nanja 2T Pc 2100) run at 100 Mhz (reported by the msi utility new version) !!!
I think that the type of mobo has serious problems !!!
HELP!!!!!!!!!!!!!!!!!!!!!!

Similar Messages

  • MSI K8N Diamond big problem

    cpu: venice 3500+ and newcastle 3500+
    ram: 2x256 kingston HX ddr500 (3.4.4.8) and 2x512 twister ddr533 (3.4.4.8)
    2xmsi 6800 gt pcie
    first problem: mainboard dont' accept any manual setting fron ram timings (i try with all bios version)
    second problem: bios can't reed correctly spd from ram (reed 2.5.4.2.8)
    third problem: maximal cpuoverclocking +5mhz, over +5mhz the system don't boot
    problem n° four: if i try to make a manual ram settings, the bios go automatic back to ram speed 120mhz
    problem n° five:  i don't find any solution
    to much problem for a mainbord with this prices.
    msi pls make a korrekt bios, at the moment i have only problem with test from this board
    thank's
    visit us: www.ocaholic.ch
     

    If you are mixing 2*512MB twinmos twister with WLCSP chips with 2*256MB kingston hynix based TSOP chips
    i don't think it's strange that you have those experiences .
    Or is it twisters with tsop dimm packages (twister-pro) .
    I under the impression that twister with wlcsp isn't the best compability for the A64's memory controller , they seem to work best at P4 setups .
    Try with only one type of modules .
    It's hard for the motherboard to set timings by spd if the modules are all of different programmed spd proms .
    Remember that 3.4.4.8 is spd data for DDR533 operation for one pair and 3.4.4.8 for 500DDR operation for the other pair.
    What (if they have any) are the spd data they have for DDR400 (it's the 200mhz/DDR400 spd data the motherboard shall read).

  • MSI K9A2 CF Big Problem

    Hi there, ive got an problem with my mobo, MSI K9AS CF its v2 i think since it got a red heatstink on the mosfets.
    The problem is, the bios is from Acer ( Aspire G7200 ) ive bought the mobo from somone, and exchanged it with my old one wich burned ( USB Ports ).
    The mobo is running with AMD Phenom 9950BE and its showing crazy temps, like 80c on idle in the bios, and 55-65 in Core Temp. ( on the old mobo never more then 63 on full load )
    Ive tried to find a bios update for this mobo, but kinda failed, and i dont know if i can just update the mobo with the orginal MSI's latest bios since its a Acer bios.
    Thx for any help.
    Regards.

    I am sorry, we do not support OEM products here. You would need to contact Acer.
    >>Please read and comply with the Forum Rules.<<
    Ps: start by cleaning the inside of the computer and coolers out.

  • MSI NEO2 FISRH 865 BIG PROBLEMS

    I have the following problem.  My computer gets jammed after a time (arbitrary moment).  With get jammed  I mean that the screen  freezes and you can nothing more than a reset.  Mostly it happens in Internet Explore.
    My computer:
    Pentium 4 2.6 GHz 800 FSB
    2 x 512 MB DDR400 Ram Twinmos CL3,3,3 in dual
    MB : MSI NEO2-LS FISR2H ( chipset 865 PE) BIOS versie 1.1
    grafic: Aopen geforce 4 MX 440-se
    HD: IBM 80 GB
    wireless mouse and keyboard logitech
    Software
    Windows XP pro service pack 1 (all update's)
    Drivers van Nvidia installed  
    Virusscanner Norton Antivirus ( up to date)
    DirectX 9
    I have tried.  
    * turning off Hyper threating
    *More fans : 3*80 mm fans and 2 x 120 mm fans (placed according to rules
    intake/outtake)
    *replacing RAM and tested with MEMtest86 (no error's)
    *replacing keyboard and mouse with wired keyboard and mouse
    *replacing graficcard with a other brand (same model) and a other brand (differend model)
    *changing hard disk
    *reinstalling windows
    *replacing IDE wires
    *keeping a eye on the temperature (is normal )
    *keeping a eye on the voltage ( normal)
    *replacing power supple with a heavere one
    But nothing helps.  Does some one knows what the problem can be or do i send it back and ask for a RMA.  And buy a motherboard that does work.. : ?(   :O

    foxie,
    My first 865PE Neo2 FIS2r board had BIG problems with on-board LAN, didnt work at all most of the time. No systemcrashes but you could not connect to Internet or LAN.
    But since a PCI networkcard work OK, it wasn´t difficult to RMA it to my lockal computershop. They got the same result. I got a new board that work perfect.

  • Big Problem with KT4V. PLEASE HELP!!!!!!

    Hello ewerybody.
    At first I describe you my confiugaration.
    KT4V Mainbord
    AthlonXP 1700+
    256MB DDR 333
    Segate Barracuda 20GB
    CD-ROM LG 52X
    Power Supply 230V
    WIN 98SE
    And now the problem.
    It appears when the procesor is set to XP 1700+. After the temerature of processor rise obove 55 C my computer is shutdown automaticly even if the bios option "critical CPU themerature" is disabled. When it happens something like alarm siren goes off. It is one high and one low sound.
    Another big problem is dramaticaly low ( even 20% - after one hour work ) "system resources". I dont know if it is call like that in english so it is START->Settings->Control Panel->System->"performance".
    Please help!!!!!!!!!!!!

    First thing you might want to do is get a new PSU. Anything under 300W is pretty much going to make for an unstable system for any processor like yours. AMD recommends(if I remember correctly) 300W or better and also read up on this sticky, I think it will help you out.
    http://www.msi.com.tw/program/service/forum/index.php?threadid=1131&boardid=13&styleid=1
    Especially the Power Supply paragraph  8)

  • BIG PROBLEM WITH A GF4 Ti4600 128MB 8872 AND WIN XP

    Hi all i have a big problem, I have a GF4 Ti4600 128MB 8872 vid card and i have installed the drivers that came with it on the msi cd. I went to restart my computer after the install and found that windows would no longer boot up. Sometimes it would make it to the loading bar for windows and other times the monitor would just go blank after the bios check. Right now the only way i can get into windows is through safe mode. I also have another Visiontek Ti4600 but it has been giving me problems so i decided to try this out. Please help me!!!! ;(  ;(
    Dark Hound

    Hi,
    Thanks for the reply.
    1. Motherboard: Don't know off hand
    2. IRQs: No conflics on them.
    3. Vid card is using IRQ 5
    4. Power Supply: Achieve ATX300W/P4A
    Ok, since first post, I was on Windows XP with SP1. I noticed in the display settings, the AGP stuff was all on with AP2 checked. I could not uncheck any of them.
    Out of frustation, I installed Window 2000 (no sp, or updates yet, just fresh install off the orig win2k CD) and reinstalled the latest MSI drivers and it seems to work now. The AGP setting however are all unchecked and you can not check any of them. What is going on here? Hmm.. I remember on one tab it says in PCI mode (this is under win2k). So, it would indicate at least on my config, that its something to do with the AGP setting maybe?? Like I said, under XP, they are set to on and the speed is 2, on win2k, they are all off.
    Jarrod

  • MSI Z77A-G43 RAM Problems

    Hi everybody,
    I have some big problems with my new build:
    Intel Celeron G1610
    MSI Z77A-G43
    2x4gb Corsair Vengeance LD low voltage 1600 mhz 1.35 v dual channel kit
    Seasonic 620w PSU
    Saphire 7850 2gb GDDRAM5
    My system wont work with both ram sticks in. If I only use one of them (it doesn't matter which one) in whatever slot I want, I don't have any problems. However if I use both of them I get bsods or restarts very soon after windows finishes loading. I must also mention that it's almost impossible to install Windows with both Ram sticks in. I almost always get a bsod when the installer is expanding the windows files.
    I must also mention that by default, my motherboard sets my ram to 1333 MHz and 1.5v even if the producer says that the ram should run at 1600 MHz and 1.35 v. If I set them to these values myself in the oc menu, they are reset to the default values again immediately after I get another crash.
    I have the latest bios and drivers and I don't know what else to try: ( any ideas?
    Thank you!

    Hi flobelix and thank you very much for your response. I tried your solution and on the next powerup, my pc didn't crash at all and I ran a couple of games and memory intensive programs.
    However, unfortunatelly, after I closed the PC for a while and restarted it again, the problems came back. The ram timings don't change anymore in BIOS but the system constantly restarts. I ran memtest for 6 hours last night with both sticks of ram in and it did not find any errors so I can't figure out what's wrong.
    Here are a couple of crash dumps:
    On Sun 2/24/2013 7:08:04 AM GMT your computer crashed
    crash dump file: C:\Windows\Minidump\022413-9204-02.dmp
    This was probably caused by the following module: ntoskrnl.exe (nt+0x71F00)
    Bugcheck code: 0x3B (0xC0000005, 0xFFFFF80002CEF09D, 0xFFFFF88002A11C10, 0x0)
    Error: SYSTEM_SERVICE_EXCEPTION
    file path: C:\Windows\system32\ntoskrnl.exe
    product: Microsoft® Windows® Operating System
    company: Microsoft Corporation
    description: NT Kernel & System
    Bug check description: This indicates that an exception happened while executing a routine that transitions from non-privileged code to privileged code.
    This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
    The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
    On Sun 2/24/2013 7:08:04 AM GMT your computer crashed
    crash dump file: C:\Windows\memory.dmp
    This was probably caused by the following module: win32k.sys (win32k!XLATEOBJ_iXlate+0xF104)
    Bugcheck code: 0x3B (0xC0000005, 0xFFFFF80002CEF09D, 0xFFFFF88002A11C10, 0x0)
    Error: SYSTEM_SERVICE_EXCEPTION
    file path: C:\Windows\system32\win32k.sys
    product: Microsoft® Windows® Operating System
    company: Microsoft Corporation
    description: Multi-User Win32 Driver
    Bug check description: This indicates that an exception happened while executing a routine that transitions from non-privileged code to privileged code.
    This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
    The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.
    On Sun 2/24/2013 7:06:31 AM GMT your computer crashed
    crash dump file: C:\Windows\Minidump\022413-9126-01.dmp
    This was probably caused by the following module: iusb3xhc.sys (iusb3xhc+0xC0D8)
    Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFFF88003AEA0D8, 0x1, 0x17C)
    Error: KMODE_EXCEPTION_NOT_HANDLED
    file path: C:\Windows\system32\drivers\iusb3xhc.sys
    product: USB 3.0 Device Driver
    company: Intel Corporation
    description: Intel(R) USB 3.0 eXtensible Host Controller Driver
    Bug check description: This indicates that a kernel-mode program generated an exception which the error handler did not catch.
    This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
    A third party driver was identified as the probable root cause of this system error. It is suggested you look for an update for the following driver: iusb3xhc.sys (Intel(R) USB 3.0 eXtensible Host Controller Driver, Intel Corporation).
    Google query: Intel Corporation KMODE_EXCEPTION_NOT_HANDLED
    On Sun 2/24/2013 12:55:57 AM GMT your computer crashed
    crash dump file: C:\Windows\Minidump\022413-9188-01.dmp
    This was probably caused by the following module: ntfs.sys (Ntfs+0x48AB)
    Bugcheck code: 0x1000007E (0xFFFFFFFFC0000005, 0xFFFFF880012598AB, 0xFFFFF88002FCB938, 0xFFFFF88002FCB190)
    Error: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M
    file path: C:\Windows\system32\drivers\ntfs.sys
    product: Microsoft® Windows® Operating System
    company: Microsoft Corporation
    description: NT File System Driver
    Bug check description: This indicates that a system thread generated an exception which the error handler did not catch.
    This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
    The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.
    On Sun 2/24/2013 12:55:51 AM GMT your computer crashed
    crash dump file: C:\Windows\Minidump\022413-8829-01.dmp
    This was probably caused by the following module: Unknown ()
    Bugcheck code: 0x0 (0x0, 0x0, 0x0, 0x0)
    Error: CUSTOM_ERROR
    A third party driver was identified as the probable root cause of this system error.
    Google query: CUSTOM_ERROR
    On Sun 2/24/2013 12:47:27 AM GMT your computer crashed
    crash dump file: C:\Windows\Minidump\022413-10842-01.dmp
    This was probably caused by the following module: ntoskrnl.exe (nt+0x71F00)
    Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFFF88002F2DEA0, 0x0, 0x0)
    Error: KMODE_EXCEPTION_NOT_HANDLED
    file path: C:\Windows\system32\ntoskrnl.exe
    product: Microsoft® Windows® Operating System
    company: Microsoft Corporation
    description: NT Kernel & System
    Bug check description: This indicates that a kernel-mode program generated an exception which the error handler did not catch.
    This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
    The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
    On Sun 2/24/2013 12:40:16 AM GMT your computer crashed
    crash dump file: C:\Windows\Minidump\022413-9516-01.dmp
    This was probably caused by the following module: ntoskrnl.exe (nt+0x71ED0)
    Bugcheck code: 0x1E (0x0, 0x0, 0x0, 0x0)
    Error: KMODE_EXCEPTION_NOT_HANDLED
    file path: C:\Windows\system32\ntoskrnl.exe
    product: Microsoft® Windows® Operating System
    company: Microsoft Corporation
    description: NT Kernel & System
    Bug check description: This indicates that a kernel-mode program generated an exception which the error handler did not catch.
    This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
    The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
    On Sat 2/23/2013 10:32:27 AM GMT your computer crashed
    crash dump file: C:\Windows\Minidump\022313-10030-01.dmp
    This was probably caused by the following module: ntoskrnl.exe (nt+0x71F00)
    Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFFF88002F26C30, 0x0, 0x0)
    Error: KMODE_EXCEPTION_NOT_HANDLED
    file path: C:\Windows\system32\ntoskrnl.exe
    product: Microsoft® Windows® Operating System
    company: Microsoft Corporation
    description: NT Kernel & System
    Bug check description: This indicates that a kernel-mode program generated an exception which the error handler did not catch.
    This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
    The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
    On Sat 2/23/2013 10:29:40 AM GMT your computer crashed
    crash dump file: C:\Windows\Minidump\022313-9516-01.dmp
    This was probably caused by the following module: ntoskrnl.exe (nt+0x71F00)
    Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFFF80000B9A850, 0x0, 0x0)
    Error: KMODE_EXCEPTION_NOT_HANDLED
    file path: C:\Windows\system32\ntoskrnl.exe
    product: Microsoft® Windows® Operating System
    company: Microsoft Corporation
    description: NT Kernel & System
    Bug check description: This indicates that a kernel-mode program generated an exception which the error handler did not catch.
    This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
    The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
    On Sat 2/23/2013 10:09:46 AM GMT your computer crashed
    crash dump file: C:\Windows\Minidump\022313-9438-01.dmp
    This was probably caused by the following module: ntoskrnl.exe (nt+0xB2C22)
    Bugcheck code: 0x1000007E (0xFFFFFFFFC0000005, 0xFFFFF80002D0EC22, 0xFFFFF88006DDA6C8, 0xFFFFF88006DD9F20)
    Error: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M
    file path: C:\Windows\system32\ntoskrnl.exe
    product: Microsoft® Windows® Operating System
    company: Microsoft Corporation
    description: NT Kernel & System
    Bug check description: This indicates that a system thread generated an exception which the error handler did not catch.
    This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
    The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
    Since I'm desperate, I'm just gonna go ahead and reinstall windows again. During the last successful pc run (after I took your advice), I ran MSI live update and installed the rest of the utility software. Maybe this did something to my drivers.... I'm really reaching the end of my possibilities :(

  • Big Problems with Audig

    Hello,I have a very big problem.Yesterday I bought a new HD (Maxtor 6L200MO) and i installed it. Everything was working, although the HD is S-ATA and my other dri'ves are P-ATA. My Windows XP installation was also successful, although I was wondering, because I could only format the HD with NTFS System.Well, that wasn't the real problem. The main problem is my Soundcard (Audigy 2). The installation of the driver, also with updates worked, but the sound is terrible. It scatchs and crackles, but with my old HD it didn't. The sound was pretty good with my old HD and I can't understand, how a HD is able to influence the soundcard. The whole day I tried a lot to get it work, but it didn't. I checked the speakercable, I installed and uninstalled the drivers several times in many combinations. I even installed windows several times, but the problem is still there. I also changed the preferences, but I don't know, if I checked all.Another strange thing is, that the PC identifies the soundcard in the system control as "SB Audigy 2 [B800]". But I can remember precisely, that it was C800 with the old HD.
    Now I have considered that maybe the problem has something to do with the NTSF system, because I had a FAT system before. I couldn't find another solution or has this something do with S-ATA?I am desperate and I don't know what to do.Here are some facts about my PC:HD: Maxtor 6L200MOSound: SB Audigy 2Mainboard: MSI 865PE Neo3-F S775Graphic ATI Radeon 8500Speaker: Creative Inspire 6..6700I hope someone can help me, thanks.Greets,bradwurst

    Ok, first up, the HD you have are 200 gig, A fat32 FS would be horriable on that. NTFS is what you need.
    ( for more info on files systems, do a google )
    When you say scratchy, do you mean like static? Take the card out and see if there is dust on the points and in PCI slot.
    Lower the WAVE and Master volume by about 5 points. ( 00% can give you a gain affect so lower to about 90% )
    Cheak the plugs from speakers are clean.
    IF all that fails, then uninstall everything Creative related and get driver cleaner ( go to guru3d.com and nav to the D/L section )
    Remove your card from the comp and start it up with no card. Then shut down.
    D/L the EAX 4 HD patch from driver D/L page here at Creative..
    Put card back in.
    Now, Install drivers from CD.
    After this, type in run msconfig and shut down all in startup programmes. Reboot.
    Install the EAX 4 HD patch.
    Repeat Msconfig.
    Update drivers VIA li've update.
    Repeat Msconfig.
    Lower WAVE and Master volume.
    If all that fails, then repeat the uninstall process.
    Now try a different PCI slot. 4 is the one you want to use, but try others but DO NOT USE THE PCI SLOT UNDER THE AGP SLOT! This can cause an IRQ conflict with AGP.
    Hope that hel
    ps.
    Just a note though, If you ever need to reload again, remove your sound card first. Reload without it.

  • Msi 990fxa-gd65 posting problem

    hello all,
     have bought a MSI 990fxa-gd65 motherboard and the amd fx 8350 processor
    built it in a new system case and now it is not posting at all
    all the fans are working my dvd player works, hard disk is working but nothing on my display at all
    no beeping sounds and the display stays black
    put in another video card no luck (working card from another computer)
    put in another cpu amd fx 8120 no luck (working cpu from another computer)
    put in memory amd entertainment edition 1233 no luck (working memory from crosair  1233 from another computer no luck)
     850 watt powersupply (chandged it with 480 watt from another working computer no luck)
    is there a big problem with my motherboard or is ther something i missed???
    i am out of options sorry for the bad englisch hope someone can help me out
    John

    hi there
    the following is in the case
    850 watt powersupply it is checked and working
    nvidia videocard gtx560 3072mb checked and working
    amd memory entertainment edition ddr3 4gb 1333mhz (9-9-9-24) checked and working
    corsair memory ddr3 1333mhz 8 gb (2 x 4) (9-9-9-24) checked and working
    checked and working means i tried it in another case with another motherboard (gigabyte) and there it all works
    the memory i use is compatible i think have tried it in all configuraties possible
    only 1 slot with memory, 2 slots with memory , and all 4 slots with memory in all cases no luck                                                                      my hard drives are all western digitale and are working
    hope this will tell you enough
    John

  • MSI GX70 3be 8970 problem

    hi there;
    Having big problem with gx70 laptop.
    there is nothing left i didnt try so before throw laptop from window i would like to ask here.
    ok problem is my idiot 8970 gpu is doesnt wantto involve with games. i.e. on metro last night i can only get 10 fps even after 5 min test it drops till 6 or 5 fps...checkin it with gpuz and msi afterburner..it looks like 8970 is on holiday or at dayoff.. cuz onboard gpu is tryin to handle everything. and for all others games sameshit.. did try manually add from swithable graphs from ati ccc
    also tried disable powerplay and ulps from registry and still the same. for few seconds at the begining of the games i can see that 8970 is load around %70 - %60 at this load i can see 70 fps, but then it leaves the duty.%0 gpu load on 8970. x8650 (apu) is loads %80.
    did try uninstall everything did try clan driver from ati...alos same from msi dl site. nothings changes..am i doin something wrong or there is something wrong with hardware?
    pls help me if you know anything. really lose my mind soon.
    windows 8.1 x64 latest bios / firmware and drivers
    thnx alot

    What drivers do you have installed right now,as in the exact number? Did you try any other version? Any problems when installing those drivers? Also,try uninstalling those you have currently,then run windows update and see if it comes up with a graphics adapter,install that and then install the actual driver.
    As a sidenote, determining which card is currently in use is as simple as looking at what colour is the power switch,if it's white then it's using the integrated GPU,if it's orange then it's on dedicated.

  • Hello all .. i have a big problem in my ipad version 5.1.1 that is when i connect the ipad with my computer the i tunes give me this message ( itunes couldnt connect to this ipad .an unknown error occurred (0xE8000012).) how i can solve this problem pleas

    hello all .. i have a big problem in my ipad version 5.1.1 that is when i connect the ipad with my computer the i tunes give me this message ( itunes couldnt connect to this ipad .an unknown error occurred (0xE8000012).) how i can solve this problem please
    and this is an pic for the problem

    There is some troubleshooting for 0xE8 error codes on this page : http://support.apple.com/kb/TS3221 - you could see if anything on that page fixes it

  • Hi I've a big problem with adobe acrobat reader XI pro and I hope you can help me. The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reade

    Hi
    I've a big problem with adobe acrobat reader XI pro and I hope you can help me.
    The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reader (adobe pdf reader, internet browsers, ...etc.).
    This problem started to happen since yesterday when I installed adobe acrobat reader XI pro to try it before I buy it, and before that when I was using the free adobe pdf reader I was totally able to copy any text from any pdf and past it anywhere with nothing wrong.
    What can I do?
    thank you a lot.

    There is no product called Adobe Acrobat Reader Pro. There is
    - Adobe Acrobat Pro ($$)
    - Adobe Reader (free)
    Which do you have? And are you a programmer?

  • I am having a big problem. I am not getting notifications from snapchat and only snapchat. I've made sure every notification setting was on and it just won't work. I have also restored my phone and deleted the app and re-downloaded it multiple times. Help

    I am having a big problem. I am not getting notifications from snapchat and only snapchat. I've made sure every notification setting was on and it just won't work. I have also restored my phone and deleted the app and re-downloaded it multiple times. It just wont give me my notifications. Help please.

    Go to Settings > Privacy > Location Services.
    Turn off SnapChat.
    Go to Settings > Notification Center
    Turn off SnapChat.
    Restart the device.
    Go to Settings > Privacy > Location Services.
    Turn on SnapChat.
    Go to Settings > Notification Center
    Turn on SnapChat.
    Test the issue.

  • How to load an image without a gui? big problems...

    Hey guys, I usually try my best to not ask for help and figure stuff out myself. But this last week i've been having big problems with this work project.
    My goal is to load images from disk, and append them to each other to create one big image.
    The images are 0-9.jpg each file containing a number in it. then i create one big file with 4 numbers in it. called final.jpg.
    so far i can do all this, but whenever the program is finished, the application just keeps running. the program has literally gone through all the steps... i have a system.out.println printed on the last line after the main, after the class instantiation... and still it stays running.
    how do you guys load images without a gui? This program will probably be running under unix, so i can't create a (for component example)
    Panel() and media track the file load... so i'm pretty much stumped
    any help you guys can provide would be really incredibly helpfull at this point. I have searched these threads for a few hours without luck. I found only 1 real post related to my problem, but eventually they said use MediaTracker = new Mediatracker( new Panel() ); which i can't use. :(
    Thanks a lot guys.
    :D

    yeah tried doing that, didn't work either.
    UPDATE
    I FINALLY found a way...
    and here it is for others to find!
    public BufferedImage getImage(String filename) throws Exception {
    FileInputStream input = new FileInputStream( filename );
    JPEGImageDecoder decoder = JPEGCodec.createJPEGDecoder( input );
    BufferedImage image = decoder.decodeAsBufferedImage();
    return image;
    it returns an image buffer, but it's better than nothing! :)
    atleast this functions under unix.

  • One Apple ID two phones big problem.

    Hi guys,
    Before 6 months I bought new Iphone 4s,but it was used one day from person who sell it to me, so it already has Apple id.
    I deleted user and created my user which was synced with iCloud and worked without any problem.
    Before 10 I bought Iphone 5, also created my Apple ID on it and sync with my PC/ iCloud.
    Yesterday I want to sell my first Iphone 4 and I did reset ( Erase all content and setting), but it did not want to wake up, so i started it with DFU mode using I tunes, and I did restore and update.
    Now I am facing to bit problem, on the begging steps it says something like "this apple id cannot be used to unlock this iphone".
    If I go to iCloud I can see only one device and currently its new iPhone 5, but both devices called with same name, so I am not sure is this problem.
    So I have two doubts:
    - I am not sure does SIM card can make this problem(on initiation phase you have to put sim in Iphone), because main is much smaller now so I using my wife SIM to finis registration Iphone 4 (iPhone 5 using smaller than iPhone4)?
    - another thing It says you have to "use original apple id..", like I sad on the beginning when i bought Iphone4 it already has apple id on it, which I was deleted and configure main (afterwards this device was visible on my iCloud). So do I need to put first creaded apple id, does iPhone remembering first created or last used. If yes I have big problem because I dont have contact of user who sell it to me.
    I want to add one thing, Iphone is not stolen I have warranty documentations and all profs that is not stolen.
    PLEASE HELP, in my country we have awful support !

    Just left the Apple store with an official answer.  You can have two phones one Apple ID, turn off auto updates so you don't automatically get apps on both phones. Then you need two different iCloud accounts.

Maybe you are looking for