MSI CX70 error using SCM and no more OSD

My OnScreenDisplay showing the setting for brigthness and loudness is not showing any more
Also if I try to enable SCM (autostart entry) then I get a red warning box at each Windows start

I'm sorry for double-posting this. I was trying to post it in the DAQ board and it kept ending up on the LabView board.
If moderators have the ability to delete this thread you are welcome to do so.

Similar Messages

Syntax errors using sql and java

Could somebody inform of the correct syntax for using UPDATE and INSERT SQL commands in a java program? Any information I can find demonstrates this with:
INSERT INTO table_name(column_name, ..., column_name)
VALUES(value, ..., value)
However - this isn't working? any suggestions - and I know its very basic, but I'm just learning.
String query = " INSERT INTO SESSIONS (" +
                    "id,module_name, module_number, level, session " +
                    "term, class_list, location, lecturer" + ")
VALUES('"+
                    fields.id.getText() + "', '"+
                    fields.module_name.getText() + "', '" + fields.module_number.getText() + "', '" +
               fields.level.getText() + "', '" fields.session.getText() "', '" +
               fields.term.getText() + "', '" fields.class_list.getText() "', '" +
               fields.location.getText() + "', '" fields.lecturer.getText() "')";
          output.append( " \nSending query: " + connection.nativeSQL(query)+ "\n");
          output.append( "query sent");
thanks
          int result = statement.executeUpdate(query);

With all those quotes and apostrophes and string concatenations, I'd be surprised if you got it right by the fourth try. (By the way, you appear to have missed a comma between "session" and "term".) Are you planning to insert more than one record in your program? If so, you should consider using a PreparedStatement. This will likely run faster, and your program will definitely be easier to read. Also, you won't have to come back here later to ask how you deal with data that includes apostrophes (the notorious "O'Brien" problem). Here's how you do that... you define the PreparedStatement only once:
String query =
"INSERT INTO SESSIONS (id,module_name, module_number, level, session, term, class_list, location, lecturer) " +
"VALUES(?, ?, ?, ?, ?, ?, ?, ?, ?)";
PreparedStatement insert = connection.prepareStatement(query);and then every time you want to insert a record you do this:
insert.setString(1, fields.id.getText());
insert.setString(2, fields.module_name.getText());
// and so on...
insert.executeQuery();

Error using JDBC and DB2 - Please help

Hi, I need some help solving this problem. I ran the same program at my university and it worked. At home I am using TomCat4 and j2sdk1.4.1. I want to connect to the IBM DB2 Universal database personal edition v7. The program compiles, but when I run it, it says it can't find
com.ibm.db2.jdbc.app.DB2Driver. The class path was automatically updated when I installed DB2. What could the problem be? Please help because I really need to use this. Thank you.
Marianne.
This is my program:
import java.io.*;
import java.sql.*;
class testDB {
public static void main(String argv[]) {
try {
// load driver and connect to database
Class.forName("com.ibm.db2.jdbc.app.DB2Driver");
String url = "jdbc:db2:test";
          String userid = "the database name"; // blanked out
          String password = "my password";
Connection con = DriverManager.getConnection(url, userid, password);
// an SQL retrieval getting all rows in table
Statement stmt = con.createStatement();
String SQLStatement = "SELECT issueID, stock FROM test.issue ORDER BY issueID";
String theIssueId;
int theStock;
ResultSet rs = stmt.executeQuery(SQLStatement);
     // loop to step through each row of result set
     while (rs.next()) {
theIssueId= rs.getString("issueID");
theStock = rs.getInt("stock");
System.out.println(theIssueId + " : " + theStock);
// tidy up
rs.close();
stmt.close();
con.close();
} catch( Exception e ) {
e.printStackTrace();
}

Try add path C:\Program Files\SQLLIB\java\db2java.zip to classpath.

Error using pretrigger when capturing more than one channel

I am having problems acquiring data with pretrigger samples when capturing more than one channel, using NI-PXI-6071E hardware and Labview's Analog Input VIs (Legacy NI-DAQ).
My goal is to trigger on one signal, while capturing another. Unfortunately, I cannot use the PFI0 for external triggering, as our cables/hardware have already been built, so I must use an analog input channel as the trigger. I understand that to do so I must capture both channels, and the channel that I wish to trigger off of must be the first channel in the list.
If I trigger and capture on the same channel (tried 1-4) then it
works great, regardless of the number of pre-trigger samples set. If I
capture more than one channel (passing the trigger channel first), with no pretrigger samples set, then triggering and capturing both work fine. However, if I do the same with the pretrigger sample > 0 I get the following error:
Error -10621 occurred at AI Control. Possible reason(s):
NI-DAQ LV: The specified trigger signal cannot be assigned to the trigger resource.
I don't se any such limitation explained in the user manual, and searching the forum, I have found a few other people that had the
same
problem
but they did not have solutions. Any ideas?
Solved!
Go to Solution.

I'm sorry for double-posting this. I was trying to post it in the DAQ board and it kept ending up on the LabView board.
If moderators have the ability to delete this thread you are welcome to do so.

Can't cure a "MSI.BufferChm - Error 1603" problem and install Officejet Pro 8000 Wireless software.

I'm trying to install an HP Officejet Pro 8000 Wireless A809N. OS = XP Pro SP3. I keep getting a message:
"Fatal error during installation. [code 1603?] [error situation code: 27764920]
The older version of BufferChm cannot be removed. Contact your technical support group."
I tried all the suggestions on this support page:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02455020&lc=en&dlc=en&cc=us
except that in solution two, some of the services wouldn't turn off due to "Access Denied".
I finally gave up and installed the basic drivers and hoped that once they were installed, I could install the full software. But no dice! How do I fix this "MSI.BufferChm" problem?
Thanks.

I don't blame the consumer-users in this forum, but when HP advertises the forum so prominently in so many places as one of their "solutions", they should provide employee help here.
I googled and it seems to be a problem for a lot of folks. And a lot of references back to this forum. I didn't follow too many of them and didn't spot a solution. There may be one - I just didn't see it.
This is from Microsoft and has several ideas I didn't see on the HP site. Microsoft Link Take a look. MSI is a microsoft thing, not HP.
As for HP employees, there are some that monitor this group unofficially. Hopefully you'll get some attention now. Or at least from some of the other folks who may have even more computer fixit experience.

Error Using Directories and UTL_FILE package

Dear All, I have a problem using UTL_FILE package...
When I'm trying to write into a directory I get the following error message:
ORA-29283: invalid file open
I have a Directory named "TMPDIRPD". I checked the permissions over this directory and found that
'OPS$PDRVBPP' user has OS permissions over it. I supposed that it was the user used to validate permissions.
Plus, I verified that user "OPS$PDRDVBPP" has read/write permission into directory with this query:
SELECT TP.grantee,
TP.privilege
FROM dba_tab_privs TP,
dba_role_privs RP
WHERE TP.table_name = 'TMPDIRPD'
AND TP.grantee = RP.granted_role
AND rp.grantee = 'OPS$PDRDVBPP';
But I'm getting the same error message.
Then I saw that 'OPS$PDRDVBPP' user calls UTL_FILE package through another package, and isn't the owner of it...
This package - who belongs to another database user - is using the OS user who owns the Oracle Installation instead 'OPS$PDRVBPP'. Isn't it?
I also checked that operative system user has read-write permissions, and asked it to the OS Administrator. He told me that oracle user has read-write permissions over this directory too... I don't know what more else can be wrong.
Have anyone some idea to fix this?

Roman, I sorry about missed info.
This is the version:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Prod
PL/SQL Release 10.2.0.4.0 - Production
"CORE 10.2.0.4.0 Production"
TNS for Linux: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
It's running over a Unix server (I really don´t know the exact version but it's a suse Linux).
I though in ORACLE Directory object named TMPDIRPD, and its directory_path defined like /companyFiles/thishost/proj/pdrdvbpp/appfiles/tmp (OS Directory).
I wrote into a OS directory using one of the procedures or functions inside the UTL_FILE package (SYS.UTL_FILE.FOPEN(parameter_path,parameter_file,parameter_io)).
Here it goes an example of code.
DECLARE
v_AbroLog UTL_FILE.FILE_TYPE;
BEGIN
v_AbroLog := UTL_FILE.FOPEN('TMPDIRPD','log_prueba_utl.'||to_char(sysdate,'mmddy
yyy'), 'a');
UTL_FILE.PUT_LINE(v_AbroLog,'PRUEBA OK');
UTL_FILE.FCLOSE(v_AbroLog);
END;
quit
SQL> @test_utl.sql;
DECLARE
ERROR at line 1:
ORA-29283: invalid file open
some other generic error messages
This error happens when the file doesn't exists.

Scan to Email not working - Invalid Credentials error (using gmail and 2-factor authentication)

I configured the HP OfficeJet 8600 printer for scan to email using the Embedded Web Server interface. In the Web interface, I added/entered an email address for my gmail account, and set the correct SMTP server details, and entered 465 for the port number. I checked the "Always use secure connection" box, as well as the "SMTP requires authentication for outgoing email messages" box. I entered correct SMTP user ID and password. Yet when I did a test, I got an error "Invalid credentials" After a lot of frustration, and trying all sorts of things, I eventually got the idea to try another email account. This time I tried a different email account, a netzero email account, configured the smtp server details for it etc. And this time when I tested the netzero email address it worked. I tried the scan to email on the printer, and it worked for the Netzero email account. it just didnt work for the gmail account. I had a while back turned on 2-factor authentication. I went to gmail settings and requested an "App password" for my HP printer. Google/gmail displayed a 16 character password, which I then entered into the password box in the HP OfficeJet printer Embedded Web Server interface (instead of my usual password), for the gmail account. And this time when I tested the email account - it worked! Problem solved! .. I share this just in case anyone else is having the same problem I had, and is going through the same frustrating experience I endured!

Thank you. This helped TREMENDOUSLY!

Errors using themes and tomahawk within portlets

I've been developing a portlet using Creator2 Update 1 that uses the myfaces tomahawk library of components. Besides the difficulty of not being able to use the visual designer, I've managed to get my portlet functioning the way I want.
My next step was to apply styles to my portlet. The difficulty here is that since portlets are aggregated within a portal, the portlet does not have access to the <head> tag of the container page (meaning I couldn't just add my own stylesheets and link them in.) I'm not sure how Creator works around this problem - I just know that it manages to using <ui:themeLinks> somehow.
Changing the theme for a regular Creator-components-only (read: no tomahawk) is a no-brainer. I simply pick a different theme in the Project view and set it as the Current Theme. I can even set my own user-defined theme. Running the portlet either through Creator or Liferay shows the applied theme.
However, once I start using tomahawk components, the theme system breaks down, throwing exceptions, such as the following:
com.sun.rave.web.ui.theme.ThemeConfigurationException: WARNING: the Sun Web Components could not load any themes.
at com.sun.rave.web.ui.theme.ThemeFactory.createThemeManager(ThemeFactory.java:274)
Curiously, it only breaks if I use one of my user-defined themes. The Creator-provided themes will work with the tomahawk components portlet.
In short, I am baffled. Creator-provided themes work regardless of tomahawk components present. My own themes work so long as there aren't tomahawk components present.

Sorry, I don't think that's going to work. Themes are not used in the standard SES index, and therefore the Oracle Text knowledgebase is not installed - hence the DRG-11446 error you're seeing.
If you figured out a way to install the knowledgebase from another system (and I'm NOT recommending that), you would still need to recreate the text index with INDEX_THEMES turned on.
You should be able to connect to the SES instance from a remote machine by commenting out both "tcp.invited_nodes" and "tcp.validnode_checking" from the sqlnet.ora file. Not sure why just adding an entry to tcp.invited_nodes didn't work for you.

UIX-XML BC4J - Unexpected errors using paths and DeltaTree on a particular UIX page

We are using a PageDescription to dynamically change a UIX tree using the DeltaTree technique described in the Dynamic Structure for For UIX Pages chapter of the UIX Developers Guide.
We search for a particular node using PathUtils.FindPathWithNodeID(RenderingContext context, UINode from, java.lang.String nodeID), but this fails when the page contains nested ViewObjectScopes.
The method throws a NullPointerException, and the render fails:
29/08/02 9.08 Valutazioni: java.lang.NullPointerException
     oracle.cabo.ui.data.DataObjectList oracle.cabo.ui.collection.DataObjectListNodeList.getDataObjectList(oracle.cabo.ui.RenderingContext)
     int oracle.cabo.ui.collection.DataObjectListNodeList.size(oracle.cabo.ui.RenderingContext)
     int oracle.cabo.ui.BaseUINode.getIndexedChildCount(oracle.cabo.ui.RenderingContext)
     boolean oracle.cabo.ui.path.PathUtils._findPath(oracle.cabo.ui.RenderingContext, oracle.cabo.ui.path.PathImpl, oracle.cabo.ui.UINode, oracle.cabo.ui.path.PathUtils$Finder)
     boolean oracle.cabo.ui.path.PathUtils._findPath(oracle.cabo.ui.RenderingContext, oracle.cabo.ui.path.PathImpl, oracle.cabo.ui.UINode, oracle.cabo.ui.path.PathUtils$Finder)
     boolean oracle.cabo.ui.path.PathUtils._findPath(oracle.cabo.ui.RenderingContext, oracle.cabo.ui.path.PathImpl, oracle.cabo.ui.UINode, oracle.cabo.ui.path.PathUtils$Finder)
     boolean oracle.cabo.ui.path.PathUtils._findPath(oracle.cabo.ui.RenderingContext, oracle.cabo.ui.path.PathImpl, oracle.cabo.ui.UINode, oracle.cabo.ui.path.PathUtils$Finder)
     boolean oracle.cabo.ui.path.PathUtils._findPath(oracle.cabo.ui.RenderingContext, oracle.cabo.ui.path.PathImpl, oracle.cabo.ui.UINode, oracle.cabo.ui.path.PathUtils$Finder)
     boolean oracle.cabo.ui.path.PathUtils._findPath(oracle.cabo.ui.RenderingContext, oracle.cabo.ui.path.PathImpl, oracle.cabo.ui.UINode, oracle.cabo.ui.path.PathUtils$Finder)
     boolean oracle.cabo.ui.path.PathUtils._findPath(oracle.cabo.ui.RenderingContext, oracle.cabo.ui.path.PathImpl, oracle.cabo.ui.UINode, oracle.cabo.ui.path.PathUtils$Finder)
     boolean oracle.cabo.ui.path.PathUtils._findPath(oracle.cabo.ui.RenderingContext, oracle.cabo.ui.path.PathImpl, oracle.cabo.ui.UINode, oracle.cabo.ui.path.PathUtils$Finder)
     boolean oracle.cabo.ui.path.PathUtils._findPath(oracle.cabo.ui.RenderingContext, oracle.cabo.ui.path.PathImpl, oracle.cabo.ui.UINode, oracle.cabo.ui.path.PathUtils$Finder)
     boolean oracle.cabo.ui.path.PathUtils._findPath(oracle.cabo.ui.RenderingContext, oracle.cabo.ui.path.PathImpl, oracle.cabo.ui.UINode, oracle.cabo.ui.path.PathUtils$Finder)
     boolean oracle.cabo.ui.path.PathUtils._findPath(oracle.cabo.ui.RenderingContext, oracle.cabo.ui.path.PathImpl, oracle.cabo.ui.UINode, oracle.cabo.ui.path.PathUtils$Finder)
     boolean oracle.cabo.ui.path.PathUtils._findPath(oracle.cabo.ui.RenderingContext, oracle.cabo.ui.path.PathImpl, oracle.cabo.ui.UINode, oracle.cabo.ui.path.PathUtils$Finder)
     oracle.cabo.ui.path.Path oracle.cabo.ui.path.PathUtils._findPath(oracle.cabo.ui.RenderingContext, oracle.cabo.ui.UINode, oracle.cabo.ui.path.PathUtils$Finder)
     oracle.cabo.ui.path.Path oracle.cabo.ui.path.PathUtils.findPathWithNodeID(oracle.cabo.ui.RenderingContext, oracle.cabo.ui.UINode, java.lang.String)
     oracle.cabo.ui.UINode com.websiteitalia.wsdk.uix.pageflow.PageFlowManager.getRootUINode()
     oracle.cabo.ui.UINode oracle.cabo.servlet.ui.UINodePageDescriptionProxy.getRootUINode()
     oracle.cabo.ui.UINode oracle.cabo.servlet.ui.UINodePageRenderer.getRootUINode(oracle.cabo.servlet.BajaContext, oracle.cabo.ui.RenderingContext, oracle.cabo.servlet.Page)
     oracle.cabo.ui.UINode oracle.cabo.servlet.ui.HTMLUINodePageRenderer.getRootUINode(oracle.cabo.servlet.BajaContext, oracle.cabo.ui.RenderingContext, oracle.cabo.servlet.Page)
     void oracle.cabo.servlet.ui.UINodePageRenderer.renderPage(oracle.cabo.servlet.BajaContext, oracle.cabo.servlet.Page)
     void oracle.cabo.servlet.AbstractPageBroker.renderPage(oracle.cabo.servlet.BajaContext, oracle.cabo.servlet.Page)
     oracle.cabo.servlet.Page oracle.cabo.servlet.PageBrokerHandler.handleRequest(oracle.cabo.servlet.BajaContext)
     void oracle.cabo.servlet.BajaServlet.doGet(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
     void javax.servlet.http.HttpServlet.service(com.evermind.server.http.EvermindHttpServletRequest, com.evermind.server.http.EvermindHttpServletResponse)
     void javax.servlet.http.HttpServlet.service(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
     void javax.servlet.http.HttpServlet.service(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
     void com.evermind.server.http.ServletRequestDispatcher.invoke(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
     void com.evermind.server.http.ServletRequestDispatcher.forwardInternal(javax.servlet.ServletRequest, javax.servlet.http.HttpServletResponse)
     boolean com.evermind.server.http.HttpRequestHandler.processRequest(com.evermind.server.ApplicationServerThread, com.evermind.server.http.EvermindHttpServletRequest, com.evermind.server.http.EvermindHttpServletResponse, java.io.InputStream, java.io.OutputStream, boolean)
     void com.evermind.server.http.HttpRequestHandler.run(java.lang.Thread)
     void com.evermind.util.ThreadPoolThread.run()
We found the element of the UIX page that causes the problem:
<bc4j:viewObjectScope name="ElementsView" >
<contents>
     <bc4j:rowScope name="NewElement" >
     <contents>
          <bc4j:region automatic="false" >
               <bc4j:key>
                    <bc4j:rowKey name="keyElement"/>
               </bc4j:key>
               <contents>
                    <bc4j:attrScope name="FlgState">
                    <contents>
                         <messageChoice name="FlgState" prompt="State" >
                              <boundAttribute name="selectedValue">
                                   <concat>
                                        <bc4j:attrProperty name="value"/>
                                        <fixed text=""/>
                                   </concat>
                              </boundAttribute>
                              <contents>
                                   
                                   <bc4j:viewObjectScope name="DecodeStateView" >
                                   <contents data:childData="list@DecodeState">
                                        <option data:value="StateCode"
                                             data:text="StateDescription"/>
                                   </contents>
                                   </bc4j:viewObjectScope>
                              </contents>
                         </messageChoice>
                    </contents>
                    </bc4j:attrScope>
               </contents>
          </bc4j:region>
     </contents>
     </bc4j:rowScope>
</contents>
</bc4j:viewObjectScope>
This usage of nested view object scopes has been explained in reply of a previous post, How to databind the children of a UIX XML choice, and before ours attempts to modify the tree it worked fine. Removing the nested view object scope the page makes the page render correctly, but we need it to retrieve the description of its state.
We get the same behaviour (and a much similar stack trace, with the same oracle.cabo.ui.data.DataObjectList oracle.cabo.ui.collection.DataObjectListNodeList.getDataObjectList (oracle.cabo.ui.RenderingContext) throwing a NullPointerException) if we use NodeUtils.createPreorderDescendentAttributeEnumeration method instead of PathUtils.

It's a bug in the DataObjectListNodeList class that's up at the top of
the stack. It's been fixed for 9.0.3. The bit of XML that's triggering
it isn't the <viewObjectScope>s, but the "data:childData".
I believe you can workaround this bug by not passing a null RenderingContext to
findPathWithNodeID(). Now, you don't have a real RenderingContext, and we
don't especially need one - "null" is legit here, but I think if
you just pass "new oracle.cabo.ui.RootRenderingContext()" then you'll
get around this bug.

Error using java and javascript

I have a jsp page that links to a bean and is working fine (getting data from the database).
On a html form I have a button with a picture that fires off javascript when clicked:
<BUTTON TYPE=reset onclick=showinfo('<%=index%>')>
<IMG SRC="http://localhost:8080/Portal/Images/q2.bmp" ALT="Info">
</BUTTON>
The javascript function just opens a new window and displays the text sent in:
<Script Language=JavaScript>
function showinfo(arrayindex)
InfoWin=window.open("","InfoWin","width=345,height=220");
InfoWin.document.write(arrayindex);
return false;
</Script>
Well in the above example index is a number (pulled from the database using a java bean and javascript converts it into a string then the function displays it correctly. If I replace <%=index%> with regular text it works fine as well(because java isn't used to pull data)! The problem occurs when I retrieve text data from the database and send it to the function. The web page gives errors about a nonterminating string. But I can move the code to somewhere else on the form(as long as I don't send it to java script) and it will print the text to the screen. I can also view the source of the web page and the html shows the text from the data base as if I hard coded the text into the javascript!!!!!!!!!!!!!!!!!
This must be a bug between java and javascript!
-can pass numbers(from a database) between the two
-can't pass text (from a database)between the two
Any info would help!

Found the problem myself!
I am using an odbc connection to msaccess and the spaces in the text was messing things up!
After taking out the spaces it worked again.

Error using setTimestamp and ojdbc14 against Oracle 7.3.4

I am having a problem setting a timestamp value against Oracle 7.3.4 and Oracle 8.0.6 databases.
Here's the code:
public Tester
(String passedUsername, String passedPassword, String passedHostName, String passedPort, String passedSID)
throws SQLException {
// Establish a database connection
try {
Class.forName("oracle.jdbc.driver.OracleDriver");
} catch (ClassNotFoundException e) { throw new SQLException("Can't find class oracle.jdbc.driver.OracleDriver"); }
StringBuffer myStringBuffer = new StringBuffer(50);
myStringBuffer.append("jdbc:oracle:thin:@");
myStringBuffer.append(passedHostName);
myStringBuffer.append(":");
myStringBuffer.append(passedPort);
myStringBuffer.append(":");
myStringBuffer.append(passedSID);
Connection myConnection = DriverManager.getConnection(myStringBuffer.toString(), passedUsername, passedPassword);
myConnection.setAutoCommit(false);
// Insert the test record
PreparedStatement myPreparedStatement = null;
try {
myPreparedStatement = myConnection.prepareStatement("insert into test_table(date_field) values (?)");
myPreparedStatement.setTimestamp(1, new Timestamp(System.currentTimeMillis()));
myPreparedStatement.execute();
} finally {
if (myPreparedStatement != null) myPreparedStatement.close();
Here's the error that occurs under Oracle 7.3.4:
java.sql.SQLException: ORA-01024: invalid datatype in OCI call
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
     at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:289)
     at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:573)
     at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1891)
     at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteFetch(TTC7Protocol.java:1093)
     at oracle.jdbc.driver.OracleStatement.executeNonQuery(OracleStatement.java:2047)
     at oracle.jdbc.driver.OracleStatement.doExecuteOther(OracleStatement.java:1940)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2709)
     at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:589)
     at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:656)
     at Tester.<init>(Tester.java:46)
     at Tester.main(Tester.java:62)
Here's the error that occurs under Oracle 8.0.6:
java.sql.SQLException: ORA-03115: unsupported network datatype or representation
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
     at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:289)
     at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:573)
     at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1891)
     at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteFetch(TTC7Protocol.java:1093)
     at oracle.jdbc.driver.OracleStatement.executeNonQuery(OracleStatement.java:2047)
     at oracle.jdbc.driver.OracleStatement.doExecuteOther(OracleStatement.java:1940)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2709)
     at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:589)
     at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:656)
     at Tester.<init>(Tester.java:46)
     at Tester.main(Tester.java:62)
Note that the table in the insert statement does not have to exist. You can even replace the statement with a garbage statement.
The error is produced regardless.
The code is being compiled under JDK 1.4
I am using the latest version of the JDBC drivers (i.e. ojdbc14.jar)
The code works fine under Oracle 8.1.7 and 9.0.1
My code needs to access all four of these database version, sometimes concurrently, so I can only use a single driver class (i.e. I can't swap out ojdbc14.jar for classes12.zip).
Any feedback would be appreciated!

Hi,
Only to say that we have the same problem like you:
- Error ORA-01024 when connection to Oracle 8.0.1 on Sun Solaris
- Error ORA-03115 when connection to Oracle 8.1.5 on Windows
We are thinking about upgrading Oracle. Is it the only solution?
Thank you

Run-Time errors using DAQmx and Borland C++ Builder 5.0

I've written a simple program on MS Visual C++ 6.0 to test my PCI-6014 board and it works fine.
I copied the code to Borland C++ builder 5.0 and had some linker problems with the .lib files that where solved with borland's "coff2omf".
Now I've been getting run-time errors when I use the function DAQmxCreateAIVoltageChan()... The error code is -50251: "The specified software component is not available. The component was not loaded".
But I'm sure that the code is right, since it works fine on MS Visual C++ 6.0!
That the part of the code where I'm getting the error:
iErro = DAQmxCreateTask("", &thTask);
iErro = DAQmxCreateAIVoltageChan(thTask, "Dev1/ai0", "", DAQmx_Val_Diff, -10.0, 10.0, DAQmx_Val_Volts, NU
LL);
Thanks for the help,
Marcelo

Hello
Borland enables certain types of exceptions by default which are initially disable in MSVC. You will need to refer to the documentation for Borland Builder on how to disable floating point exceptions. I believe you can do it by adding the following statement to your initialization code, but you should double check this:
_control87(MCW_EM, MCW_EM);
These exceptions get thrown because we are doing some floating point initialization underneath. This is not an indication of a bug or a problem of any sort. Apparently you have to this for alot of libraries to work correctly with Borland (OpenGL etc...)
Hope this helps
Bilal Durrani
NI
Bilal Durrani
NI

HT1923 itunes64.msi missing error for itunes and quicktime update

I cannot get the latest update to go for the subject reason. Any clues on what I can do? I really don't want to roll back 6 months. Thanks

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

EJBGen Error using CMP and relationships

I am trying to use this example, Order and LineItems. An order can have multiple line items. When I compile things using WeblogicWorkshop Beta for 9.1 I get the following error.
EJBGen Error: Error: [OrderBean] Relation OrderCanHaveMultipleLineItems has only one role: One-OrderBean@lineItems-Has-OrderBean
Does anybody know how to fix this error ??
Thanks,
Ian
My OrderBean looks like this:
@Entity(ejbName = "OrderBean", dataSourceName = "jdbc/JavaWorldPool", tableName = "TOrder", primKeyClass = "java.lang.String", defaultTransaction = Constants.TransactionAttribute.REQUIRED)
@JndiName(local = "ejb.OrderBeanLocal")
@FileGeneration(localClass = Constants.Bool.TRUE, localHome = Constants.Bool.TRUE, remoteClass = Constants.Bool.TRUE, remoteHome = Constants.Bool.TRUE, valueClass = Constants.Bool.TRUE)
@Relations(value={@Relation(cmrField = "lineItems", targetEjb = "OrderBean", multiplicity = Relation.Multiplicity.ONE, name = "OrderCanHaveMultipleLineItems")})
abstract public class OrderBean extends GenericEntityBean implements EntityBean {
public java.lang.String ejbCreate(java.lang.String key)
throws CreateException {
setOrderid(key);
return null;
public void ejbPostCreate(java.lang.String key) {
@CmpField(column = "orderid", primkeyField = Constants.Bool.TRUE)
public abstract java.lang.String getOrderid();
public abstract void setOrderid(java.lang.String orderid);
@CmpField(column = "status")
@LocalMethod()
@RemoteMethod
public abstract java.lang.String getStatus();
@LocalMethod()
@RemoteMethod
public abstract void setStatus(java.lang.String status);
@CmpField(column = "creditApproved")
@LocalMethod()
@RemoteMethod
public abstract Boolean getCreditApproved();
@LocalMethod()
@RemoteMethod
public abstract void setStatus(Boolean creditApproved);
// Container Managed Relation Fields //
@LocalMethod()
@CmrField
public abstract Collection getLineItems();
* @ejbgen:local-method
public abstract void setLineItems(Collection lineItems);
@Entity(ejbName = "LineItemBean", dataSourceName = "cgDataSource", tableName = "TLineItem", primKeyClass = "java.lang.String", defaultTransaction = Constants.TransactionAttribute.REQUIRED)
@JndiName(local = "LineItemBeanLocal")
@FileGeneration(localClass = Constants.Bool.TRUE, localHome = Constants.Bool.TRUE, remoteClass = Constants.Bool.TRUE, remoteHome = Constants.Bool.TRUE, valueClass = Constants.Bool.TRUE)
@Relations(value = { @Relation(cmrField = "order", fkColumn = "orderfk", targetEjb = "OrderBean", multiplicity = Relation.Multiplicity.MANY, name = "OrderCanHaveMultipleLineItems") })
abstract public class LineItemBean extends GenericEntityBean implements
EntityBean {
public java.lang.Integer ejbCreate(java.lang.String key)
throws CreateException {
// setKey(key);
return null;
public void ejbPostCreate(java.lang.String key) {
@CmpField(column = "lineitemid", primkeyField = Constants.Bool.TRUE)
public abstract java.lang.String getLineitemid();
public abstract void setLineitemid(java.lang.String id);
@CmpField(column = "quantity")
@LocalMethod()
@RemoteMethod
public abstract Integer getQuantity();
@LocalMethod()
@RemoteMethod
public abstract void setQuantity(Integer quantity);
@CmpField(column = "status")
@LocalMethod()
@RemoteMethod
public abstract String getStatus();
@LocalMethod()
@RemoteMethod
public abstract void setStatus(String status);
@CmpField(column = "tax")
@LocalMethod()
@RemoteMethod
public abstract Double getTax();
@LocalMethod()
@RemoteMethod
public abstract void setTax(Double tax);
@CmpField(column = "shipmentdate")
@LocalMethod()
@RemoteMethod
public abstract Date getShipmentdate();
@LocalMethod()
@RemoteMethod
public abstract void setShipmentdate(Date shipmentDate);
// Container Managed Relation Fields //
@CmrField
@LocalMethod
public abstract OrderBeanLocal getOrder();
@LocalMethod
public abstract void setOrder(OrderBeanLocal order);
}

I figured it out, it appears to be a problem with Weblogic Workshop. I used the ejbgen tool and it fixed the problem, contacted BEA support about this issue and the answer was they don't support it because it is a Beta Version.
Ian

#Error using IIF and divide by zero

I am getting an error in a calculated field that could potentially divide by zero, even though I'm using an IIF. The column displays in the report as "#Error". My expression looks like this:
= IIF(Fields!Qty.Value = 0,
"None", Fields!Hours.Value / Fields!Qty.Value)
I have successfully used this approach with INT fields, but this time the Hours field is a NUMERIC(9,2). My workaround is to do this:
IIF(Fields!Qty.Value = 0, "None", IIF(Fields!Qty.Value = 0, 42, Fields!Hours.Value) / Fields!Qty.Value)
I guess the 42 is cast to an INT inside the second IIF and the calculation works.
What's strange is that the division would even be carried out in the event of Qty = 0 from the first IIF, because the expression should just evaluate to "None" and that would be that.
Has anybody run into this problem? Is my workaround the recommended approach?
-Larry

First a diatribe: This is just one of the many annoying "features" of SSRS that needs to be fixed. It should just flat out work. Period.
Now the fix.
The following formula to calculate Discount% gives the #Error result if List = 0
=iif(Fields!List.Value=0,0, (Fields!List.Value-Fields!Net.Value)/Fields!List.Value)
However, if you add a very small number to the divisor it will work.
=iif(Fields!List.Value=0,0, (Fields!List.Value-Fields!Net.Value)/(Fields!List.Value+.000001))
Apparently SSRS evaluates the false part of the expression before it tests. Try this in most any other language and you will not have this problem.
You just need to add a small enough number to your formula to not impact your results when the divisor is not zero.
You can actually leave out the IIF entirely if you do this:
Fields!List.Value-Fields!Net.Value)/(Fields!List.Value+.000001)
I usually leave the syntax in there just so I know what the intention was.

MSI CX70 error using SCM and no more OSD

Similar Messages

Maybe you are looking for