MSI GeForce4 mx440 TV-OUT HELP needed :)

Hello ! i need help :(
TV-out don't wanna work on MSI GeForce4 mx440 V.card :( i can activate "clone" mode or any other..why ?
and how can i do that ?
info:
PIII 1ghz, Intel
Win 2k prof.
m. board - Intell D815eea
help plz :"(

Privet ! vse gorazdo proshe chem kajetsya
sdelay tak chto srabotalo 100%
virubi komp, otklyuchi provob s Video out, vklyuchi komp, v windax prisoedeni provod, dalee vklyuchi ustroystvo na kotoroee vivodish, i idi v Nview (display - prop.'s - setting - advanced - Nview) doljen nayti 2 ustroystva...monitor, TV. dal'she "idi" v "select output device" ukaji kodirovku.....eto i vse ! na vidike najmi "LINE IN" mode....
udachi !
pishi
   :D  8)
Turn off PC, disconnect all cables, turn on pc, when it "booted", connect all cables, go to Nview (display - prop.'s - setting - advanced - Nview) "if you connected all right" you shold see few choises, Clone etc...second one will be monitor, then go to "select output device" and choose "PAL or NTSC dunno which on u have "
all done then select "LINE IN" mode if you connected with "VSH"
on russian it was cooler lol

Similar Messages

  • MSI GT780DX Serious keyboard issue - Help Needed

    Hello everyone,
    I have an MSI GT780DX and a few months ago it started to fail the x key when I pressed it...
    After sometime it started failing the W key...
    Then it was the arrow down key...
    So I bought another keyboard and I managed to install it in place, the led lights worked just fine but I'm with a terrible issue now.
    The keys are all wrong, for example the space bar = backspace when I press it, the a = ; the  j=l and so on... all the keys are mixed up...
    Does anyone have any idea what might be causing this and how to fix it?
    My notebook is the msi gt780dx with Win 7 (its the original Win7 that came with the notebook)... The new keyboard has the same part number but its symbol for the windows key is different (it's the Win 8 logo)
    Please any help would be gladly appreciated.
    Best Regards.

    Hi I tried resetting the EC and no change...
    Then I try installing Win 8  but at the serial number screen the keys are already messed up...
    Tried with ubuntu also and the same.
    I'm assuming its not an OS related problem...
    And yes, warranty was already off when I switched the keyboards.
    Any other ideas?
    Does anyone also know where can I find a Win7 keyboard for this notebook?
    I'm running out of options...

  • Default MSI Z87-G45 Lan/Usb Help needed.

    Hello,
    So yesterday i massively upgraded my pc with the following components:
    MSI Z87-G45
    Intel Core i5-4670K
    GeForce GTX 780 3GB (Classified)
    and kept my old Ram (Gskill ripjaw ddr3 3x4gb) ,Hd's PSU. and i am using windows 8.1
    The main problems i am having are as follows:
    1. I am unable to get the usb ports to recognize most things i plug in. This included a USB flash drive and a wireless network stick.
    2. I am unable to install any Lan items from the mobo factory disc. The option to install the LAN drivers are greyed out on the disc menu, and when i search for them they will not install. Now i've found them online and downloaded them to a Usb Drive, but i can't use that because the USB drive won't be recognized by windows.
    Any help on these issues would be so greatly appreciated, i am getting terribly frustrated and don't know what to do.
    I have checked the Bios and it appears to be current, i have also reset the Mobo battery at the request of MSI.

    have you done a new fresh OS installation after mainboard change?

  • MSI p55 - gd80 motherboard code help needed

    Hi all, today i moved house and my PC has went awol on me. Basically the monitor, mouse and keyboard will not turn on.. I thought maybe something got moved about in the case, so I basically took everything out and I mean everything and put them back in securely.
    After trying several things including resetting the cmos and taking the bios battery out, I still cant figure out what is wrong.
    I did notice that when I put my ram in the two blue slots the motherboard wont get past the FF code on the LED display. However when they are in the two black slots the motherboard generally gets to 2E. I understand that it stands for "Initializes all output devices". But I don't know how to rectify this problem.
    Oh and I forgot to add, the DVD drive is now not working for some reason and my win7 disk in it.
    Any help would be greatly appreciated. Thank you,
    Iain

    Quote from: Henry on 27-August-10, 04:47:15
    "Installed Memory 4.00GB (1.99 GB usuable)
     Yes you should RMA the card since it works OK with a different one.
     For the memory, re-seat the sticks again and I would also suggest re-seat CPU and check for bent/damaged pins in the CPU socket. If all of the pads on CPU don't make full contact with the pins it could cause memory problems. This has happened to others and usually re-seating CPU fixes it.
    Thanks Henry. I tried reseating the RAM and CPU but no luck. There is a tiny spot on the CPU.. I dont know if that could be a problem or not?

  • MSI U8668 and MSI GeForce4 MX440

    I have a Systemax Venture computer.  It is brand new, 2.4GHZ, 512 Meg DDR.
    The motherboard is a MSI Biostar U8668 Motherboard.
    It has a built in 32MEg 3D SavageDDR video controller.
    I purchased a brand new MSI Mx440 8X (128MEG DDR, 8x AGP) video card.
    I am using FreshDiagnose to check my computer performace.  Before  the new card, I get about 633 Video Performance.  After the MSi GeFroce card, I get 533.  I have tried new drivers and such, to only worsen the results.  I have tried the card in another machine, and it performs worse than a Diamond Stealth 64 card.  This card has 128MEG DDR ram onboard.
    I am completely stuck.  I paid good money for this card, and want it to outperform any other card I have!!
    Does anyone else have any ideas, or has anyone had this problem>  What should be the driver revison # for the Video card, the Motherboard?
    Also, whatd the best Video performance benchmark to test with and get the best results??
    This is my last effort to try befor obtaining an RMA, but would like to solve the problem ASAP!
    Thanks!
    Neil Hicks

    Biostar ( http://www.biostar.com.tw ) is not related to MSI.
    This board uses a VIA P4X266 chipset, did you install the VIA 4in1 drivers?
    How many points do you get in 3DMark 2001 (not 2003) ?
    I downloaded FreshDiagnose and it's benchmarks are all 2D acceleration (simple draw operation, text, moving bitmaps, drawing circles and lines...)
    These are all legacy features and not executed in the 3D core of the VGA card.
    If you want to run Doom(1) at 300FPS you would care about this, but it has nothing to do with D3D or openGL preformance.

  • Msi geforce4 mx 460 locking up pc, help!

    here is what i have:
    asus cuv4x mb, 667 mhz intel celeron, 256 mb ram
    msi geforce4 mx 460
    diamond pci sound card
    some isa 10/100 card
    windows xp pro
    this is a fresh install of win xp, i tried the drivers on the msi cd, also the newest reference drivers from nvidia.com, that didn't help. i tried removing the sound card but no luck there. it mainly locks in games like GTA3 or NHRA Dragracing. it runs for about 30 seconds and locks. ctrl alt del doesn't work so i have to power down. it locks in windows also, but not as often. i don't see anything conflicting in my device manager. does anyone have anything i can try? thanks in advance!

    oops, i must be a moron. under the 3.3v and 5v it says 120w, then under all the voltages (3.3v, 5v, 12v, -5v, -12, -9) it says 250w. so just to verify, i need one that has 200w with the 3.3v and 5v? or is it ok now? sorry...
    Quote
    Originally posted by wonkanoby
    you need 200 plus watts 3.3 and 5 v combined with an
    xp gf4 combo,im surprised it booted to be truthfull
    with only 120 watts
    get a better psu that states combined over 200 watts and 3.3 amps about 30

  • What kind of TV-Out is on the 64MB Version of the MSI Geforce4-Ti4200?

    It´s very important for me:
    What kind of TV-Out is on the 64MB MSI Geforce4-Ti4200? And what kind is on the 128MB Version? (The same?)
    Thanks
    Bloody Judge

    The hub is not compatible. It sounds like the unit is powering the link to the TC.. which would cause the TC to freeze up. You might need a special USB cable which has just data connection but no power.
    It is really hard to get info on hubs that work.. particularly because there are so many around and many are changed .. eg if you buy a belkin this year it fails when last years one worked.. that is because all the manufacturer is farmed out to various factories in China who use .. the cheapest parts available today to build them.. next week it could be different.
    The TC just doesn't have a huge amount of memory to store drivers for every USB under the sun. So some work some don't. The best I have found is the cheapest brand x USB2. I would not bother with USB3 since that chipset is even more unlikely to be supported than USB2 ones.
    I have tried to get people to add to a database.. not much so far.
    https://discussions.apple.com/thread/5912861?tstart=0
    Appreciate anyone who takes the time to add their experience.

  • Troubleshoting help needed:  My iMac keeps crashing and restarting with a report detail: "spinlock application timed out"  What can I do to fix this?timed out"

    Troubleshooting help needed:  My iMac keeps crashing and restarting with a notice: "Spinlock application timed out"  What can I do?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
    Select the most recent panic log under System Diagnostic Reports. Post the contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports.

  • Help needed. I have a 3TB external hard drive partitioned into 1TB's. I used one partition as backup for the main computer hard drive. But now it is greyed out as shown in the disk utility and its name changed, i dont know how that happened, i tried verif

    Help needed. I have a 3TB external hard drive partitioned into 1TB's. I used one partition as backup for the main computer hard drive. But now it is greyed out as shown in the disk utility and its name changed, i dont know how that happened, i tried verifying and repairing it but had no luck. I also tried mounting and unmounting it but still no solution. Anyone to help please?

    Looks bad. I would strongly advise backing up the stuff on the other two partitions as soon as possible in case the rest of the drive goes wrong.
    Beyond that, Disk Utility has limited abilities to repair disks, DiskWarrior uses a different approach and might, emphasis might be more successful. It has certainly done the job for me in the past when Disk Utility could not.
    See http://www.alsoft.com/diskwarrior/

  • Help needed, M getting this message sandbox environment error no test user account, when downloading any application from iTunes, friend told me to sign out and sign in iTunes it might solve the problem but instead I cannot login I to my itune account.

    Help needed,
    I am getting this message sandbox environment error no test user account, when downloading any application from iTunes, friend told me to sign out and sign in iTunes it might solve the problem , and i triyed it but still  I cannot login I to my itune account. Same message keeping. Popping up,  this problem started supricly today.

    Take a look at the instructions here.
    http://www.technogal.net/2012/03/this-is-not-test-user-account-please.html

  • Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with re

    Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with reddish cast and loss of detail
    System: Windows 7
    Adobe CS5
    Printer: Epson Stylus Photo 1400
    Paper: Inkjet matte presentation paper with slight luster
    Installed latest patch for Adobe CS5
    Epson driver up to date
    After reading solutions online and trying them for my settings for 2 days I am still unable to print what I am seeing on my screen in Adobe CS5. I calibrated my monitor, but am not sure once calibration is saved if I somehow use this setting in Photoshop’s color management.
    The files I am printing are photographs of dogs with lots of detail  I digitally painted with my Wacom tablet in Photoshop CS5 and then printed with Epson Stylus 1400 on inkjet paper 20lb with slight luster.
    My Printed images lose a lot of the detail & come out way to dark with a reddish cast and loss of detail when I used these settings in the printing window:
    Color Handling: Photoshop manages color, Color management -ICM, OFF no color adjustment.
    When I change to these settings in printer window: Color Handling:  Printer manages color.  Color management- Color Controls, 1.8 Gamma and choose Epson Standard it prints lighter, but with reddish cast and very little detail and this is the best setting I have used so far.
    Based on what I have read on line, I think the issue is mainly to do with what controls are set in the Photoshop Color Settings window and the Epson Printer preferences. I have screen images attached of these windows and would appreciate knowing what you recommend I enter for each choice.
    Also I am confused as to what ICM color management system to use with this printer and CS5:
    What is the best ICM to use with PS CS5 & the Epson 1400 printer? Should I use the same ICM for both?
    Do I embed the ICM I choose into the new files I create? 
    Do I view all files in the CS5 workspace in this default ICM?
    Do I set my monitor setting to the same ICM?
    If new file opens in CS5 workspace and it has a different embedded profile than my workspace, do I convert it?
    Do I set my printer, Monitor and PS CS5 color settings to the same ICM?
    Is using the same ICM for all devices what is called a consistent workflow?
    I appreciate any and all advice that can be sent my way on this complicated issue. Thank you in advance for your time and kind help.

    It may be possible to figure out by watching a Dr.Brown video on the subject of color printing. Adobe tv
    I hope this may help...............

  • MySQL has run out of memory ::Help needed::

    ::Help needed::
    I've created a PHP web application in Dreamweaver, which uses a MySQL database, containing 14 tables.
    On one page, I use a an SQL query to select data from 10 of the tables in the database.
    However, when I try to preview the page in a browser, a PHP warning stating that the MySQL engine has run out of memory.
    Is there a way of increasing the Memory Cache of the engine, or a way to optimize the performance?

    Is this happening locally?
    If it is, try rebooting your system and see if this fixes the problem. If not then you have a problem with your code. If it works locally but not on the server, then you know it's not something in your code causing the issue, so you can confidently go to your host support and have them sort it out.
    With any such situation, testing locally first is a vital debugging step.
    Hope this gives you a path to follow.
    Lawrence   *Adobe Community Expert*
    www.Cartweaver.com
    Complete Shopping Cart Application for
    Dreamweaver, available in ASP, PHP and CF
    www.twitter.com/LawrenceCramer

  • MSI GeForce4 Ti4600-VT2D8X advice?

    MSI GeForce4 Ti4600-TD8X 128MB,
    MSI GeForce4 Ti4600-VT2D8X
    MSI GeForce 4 Ti4200-VTD8X
    What's really the difference?
    I'm trying to figure out which of these cards to get.
    I'll be using it with 3DSMAX for open gl.
    and video input /output for various projects.. I'll need  at least 704x 480 resolution at real time playback/capture.
    Has anyone tried using this card with these?
    3dsmax
    Maya
    Premiere
    Combustion
    Avid
    Any advice or info would be greatly appreciated
    Waqas
    [email protected]

    Quote
    When I just touch the video card a little with the power off (without removing at all), it gets back normal when I restart...
    The pins on the monitor cable maybe bent.  Can you try another monitor.
    Could be something loose somewhere on card maybe?  Bad solder somewhere etc.  When card warms up it can lose connection.
    What are the Power Supplies.  Can be the root of alot of problems exp with Gf4 (make and wattage of PSU can be the difference of it working or not)
    Bluesky.  I'm not familier with grounded AC plug.  Does this have three wires, or is it a separate wire???

  • My GF4 MX440 TV-OUT finally works after one and half a year!!!

    I bought this MSI GF4 MX440 video card in the middle of 2002. It comes with TV-IN and TV-OUT. The TV-IN works well and I can record video by connecting it to the AV-OUT of my TV. However, the TV-OUT didn’t work: after connecting the TV-OUT port to the AV-IN of the TV, the driver detected the TV correctly, but after selected clone option from nView, the whole screen of TV becomes light gray and no picture is displayed at all. I tried more than 5 different drivers (including the original MSI driver) and Win9x, Win2000 and XP, nothing works.
    Yesterday I installed TVTool, and strange things happened: when I run TVTool the first time, nothing was changed: the TV is still in light gray color. After I clicked on button “Scan” in “Adjust” tab in TVTool, the screen of computer is displayed in the TV! Even if I quit TVTool, the TV-OUT is still working. I went to the display properties and setup TV as the device for full screen display, then when I use Windows Media Player or Real Player to play a video using normal size, the movie is displayed full screen on TV automatically! It’s really amazing. After stopped playing the video, the TV comes back to display the screen of the monitor again.
    After I rebooted the system, the TV-OUT was not working initially, TV displays light gray again. But after run TVTool once without doing anything, the TV-OUT starts working even if quit TVTool now. So now when I want to use TV-OUT, I have to run TVTool once and the quit it. It is much better than nothing works at all.
    I cannot explain why this happens. It looks that the TVTool enables something in the chip of the video card. Hope this will help somebody else.
    BTW, this is my first and will be the last video card from MSI.

    i m also having the same MX440 card , i am also having one problem with it..
    i can run the TV-OUT option easily..
    but as the screen of computer is displayed in the TV, but when i try to run any movie on my PC and i want to see the movie simultaniously at the same time , it is not possible ..
    i can only see it on the primary display which is set.. , it coult be TV or monitor..
    i want to see the same movie in both the display at the same time , is that possible ?
    please someone help me ..
    thanks

  • Cooler for GeForce4 Mx440 T8X

    I bought a GeForce4 MX440 T8X las week, but I saw taht it's has not got a cooler.
    That is right or I need to buy it?
    Regards.

    You mean it just has a heatsink without a fan ?
    If that is what you mean it's normal, you don't need to add anything to it.
    If it has no cooling at all (bare nVIDIA chip) return it as it should come with a cooling solution.
    This heatsink is usually used on MSI MX440 cards:
    (The PCB might be red on your AGPx8 one)

Maybe you are looking for